MSG_WAIT_ACK state not changed even after ACK from TP received

Hi All,
We send payload to TP using RosettaNet v2.0 protocol. Our TP also responds with successful ack, but the business message state(outbound for b2b) is still in MSG_WAIT_ACK. We see a row (inbound to B2B) with the ack details(sender: TP name, receiver: Host name, doc type: ack) also in our business message report.
Please let me know what would be the issue.
Thanks.

Hi Anuj,
Thanks for your reply. Refer to Message link is enabled in the business message of Ack. The collaboration id given is: PIP0AA0652813E6C026594000001647E4DC
after clicking the Refer to Message, its taking us to the correct request message and the collaboration id present there is :PIP0AA0652813E6C026594000001647E4DC
In the Wire message tab, this Request message is still showing as "Processing" instead of "Complete". the TP has received the request and have ack'ed back too.
Thanks.

Similar Messages

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Change Button Not Active even after Delivery Completion Indicator is Remove

Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,

Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

N7k console not responding even after proper boot, and even from rommon mode

N7k console not responding even after proper boot, and even from rommon mode

Try using a different application (putty) and test. If that does not work, RMA the sup.
HTH

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

BED not changing value after Qty change in MIGO

Hi,
When we are doing MIGO, a message is coming - Ensure that you can receive more quantity on the same excise invoice..after that we can't save the document.
Scenario:
First i do J1IEX, there Excise Invoice Quantity was 1216 and BED was 684.61 on it.
But when we do MIGO, We are just changing the Qty from 1216 to 1000. BED should calculate automatically after change the Qty but not changing.
After that when we are going to post the document, above mentioned message coming and document not saved.
Please guide..
Anil

Solved myself..
Solution is maintain the Excise Group with below path: -
SPRO--> Logistics General --> Tax on Goods movement --> India --> Basic Settings --> Maintain Excise Group.
Now db click on suitable Excise Group. There, check on EI capture under MIGO Settings window.
After done that at the time of MIGO, BED rate should calculate automatically.
Thanks all....

Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing!

Permissions will not set, even after using terminal commands?

Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!

Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MSG_WAIT_ACK state not changed even after ACK from TP received

Similar Messages

Maybe you are looking for