.msi do not install normally, but they do from terminal msiexec

I have a very strange problem happening right now and have tried every possible way to fix it or find a way around it.
Whenever I try to install any .msi file normally by just clicking on it in the explorer it fails with "Error 1359.An internal error ocurred.", if I try to install the same file using msiexec /i <msipath>setup.msi
/l*v c:\temp\msi.log it installs without any error, which is very strange.
I could live with that and just use msiexec whenever I had the need to install an .msi cause it doesn't happen too often. If only I didn't have the reason to install
Miscrosoft Visual C++ 2013 Redistributable (x86). The problem with it is that it has .msi packed inside .exe so I cannot run it using msiexec and on normal install it gives "Error 1359.An internal error ocurred."
and then 0x80070643 - Fatal error during installation. Here's the log file but it doesn't tell much apart from MSI package failing to install:
[1A28:19FC][2014-09-26T15:39:29]i001: Burn v3.7.2002.0, Windows v6.1 (Build 7601: Service Pack 1), path: F:\Downloads\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{5DA9B3E6-81D9-4264-B441-633B3600D64B} {0AABAA02-8A98-4165-98FA-55AEC96EE970} 6420'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929.log'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleOriginalSource' to value 'F:\Downloads\vcredist_x86.exe'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.21005'
[1A28:19FC][2014-09-26T15:39:29]i100: Detect begin, 2 packages
[1A28:19FC][2014-09-26T15:39:29]i102: Detected related bundle: {7f51bdb9-ee21-49ee-94d6-90afc321780e}, type: Upgrade, scope: PerMachine, version: 12.0.21005.1, operation: None
[1A28:19FC][2014-09-26T15:39:29]i101: Detected package: vcRuntimeMinimum_x86, state: Absent, cached: Complete
[1A28:19FC][2014-09-26T15:39:29]i101: Detected package: vcRuntimeAdditional_x86, state: Absent, cached: Complete
[1A28:19FC][2014-09-26T15:39:29]i052: Condition 'VersionNT >= v6.0 OR (VersionNT = v5.1 AND ServicePackLevel >= 2) OR (VersionNT = v5.2 AND ServicePackLevel >= 1)' evaluates to true.
[1A28:19FC][2014-09-26T15:39:29]i199: Detect complete, result: 0x0
[1A28:19FC][2014-09-26T15:39:31]i200: Plan begin, 2 packages, action: Install
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleRollbackLog_vcRuntimeMinimum_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_0_vcRuntimeMinimum_x86_rollback.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleLog_vcRuntimeMinimum_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_0_vcRuntimeMinimum_x86.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleRollbackLog_vcRuntimeAdditional_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_1_vcRuntimeAdditional_x86_rollback.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleLog_vcRuntimeAdditional_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_1_vcRuntimeAdditional_x86.log'
[1A28:19FC][2014-09-26T15:39:31]i201: Planned package: vcRuntimeMinimum_x86, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[1A28:19FC][2014-09-26T15:39:31]i201: Planned package: vcRuntimeAdditional_x86, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[1A28:19FC][2014-09-26T15:39:31]i207: Planned related bundle: {7f51bdb9-ee21-49ee-94d6-90afc321780e}, type: Upgrade, default requested: None, ba requested: None, execute: None, rollback: None, dependency: None
[1A28:19FC][2014-09-26T15:39:31]i299: Plan complete, result: 0x0
[1A28:19FC][2014-09-26T15:39:31]i300: Apply begin
[1914:1200][2014-09-26T15:39:31]i360: Creating a system restore point.
[1914:1200][2014-09-26T15:39:38]i361: Created a system restore point.
[1914:1200][2014-09-26T15:39:38]i000: Caching bundle from: 'C:\Users\ekze\AppData\Local\Temp\{ce085a78-074e-4823-8dc1-8a721b94b76d}\.be\vcredist_x86.exe' to: 'C:\ProgramData\Package Cache\{ce085a78-074e-4823-8dc1-8a721b94b76d}\vcredist_x86.exe'
[1914:1200][2014-09-26T15:39:38]i320: Registering bundle dependency provider: {ce085a78-074e-4823-8dc1-8a721b94b76d}, version: 12.0.21005.1
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: vcRuntimeMinimum_x86 at path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: cab54A5CABBE7274D8A22EB58060AAB7623 at path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\cab1.cab.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: vcRuntimeAdditional_x86 at path: C:\ProgramData\Package Cache\{F8CFEB22-A2E7-3971-9EDA-4B11EDEFC185}v12.0.21005\packages\vcRuntimeAdditional_x86\vc_runtimeAdditional_x86.msi.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: cabB3E1576D1FEFBB979E13B1A5379E0B16 at path: C:\ProgramData\Package Cache\{F8CFEB22-A2E7-3971-9EDA-4B11EDEFC185}v12.0.21005\packages\vcRuntimeAdditional_x86\cab1.cab.
[1914:1200][2014-09-26T15:39:38]i301: Applying execute package: vcRuntimeMinimum_x86, action: Install, path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi, arguments: '
MSIFASTINSTALL="7" NOVSUI="1"'
[1914:1200][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to install MSI package.
[1914:1200][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to execute MSI package.
[1A28:19FC][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[1A28:19FC][2014-09-26T15:41:26]i319: Applied execute package: vcRuntimeMinimum_x86, result: 0x80070643, restart: None
[1A28:19FC][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to execute MSI package.
[1914:1200][2014-09-26T15:41:26]i330: Removed bundle dependency provider: {ce085a78-074e-4823-8dc1-8a721b94b76d}
[1914:1200][2014-09-26T15:41:26]i352: Removing cached bundle: {ce085a78-074e-4823-8dc1-8a721b94b76d}, from path: C:\ProgramData\Package Cache\{ce085a78-074e-4823-8dc1-8a721b94b76d}\
[1A28:19FC][2014-09-26T15:41:27]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No
I have tried doing a clean boot, tempering with registry, repairing .net 4.5, using different antivirus tools and even microsoft malicious software removal, they found nothing, and I don't have any antivirus or firewall software running at the time of installation,
as some have mentioned it could be the cause. I couldn't find any other solutions and any others doesn't seem to help. Is the only way out a complete reinstall of windows? I'm pretty desperate for it now.
Really hope that someone from here can offer a solution for this problem.

Similar Messages

CrystalReports11_5_NET.msi will not install

I have the same problem as outlined below. CrystalReport11_5_NET.msi will not install. It gives the error message "This software package can only be installed on systems that has installed .Net 1.0 or 1.1. Needless to say, 1.1 is installed. Does any one have a simpler solution than below?
Thanks,
Robert T
http://forums.msdn.microsoft.com/es-ES/vscrystalreports/thread/598537d5-03dd-460c-9696-60717c2dc2f4/
We currently have a case where we are supporting multiple versions of our product on the same web server (a windows 2003 server). However, we have 2 versions of our application on the same server, but one is in ASP.nET 1.1 and the other is in ASP.nET 2.0. Our applications are fine and can co-exist ok on the server. They both use Crystal REports XI, Relesae 2, which supports both 1.1 and 2.0.
Our developer machines run just fine wtih both products and crystal reports, but the problem we are having is deployment. When we install the runtime redistrubutale for ASP.nET 2.0 on the machine a file(CrystalReports11_5_NET_2005.msi) then our ASP.NET 2.0 application works fine. However, when we install the crystal runtime redistributable fro ASP.nET 1.1 a file (CrystalReports11_5_NET.msi) windows 2003 server will not let us install it, it gives us an error saying that "This software package can only be installed on systems that has .NET 1.0 or 1.1". Which of course this server has, because our application in 1.1 runs jsut fine.
2 questions.
1. Can Crystal Reports XI Relesae 2 co-exist on a windows 2003 server for BOTH the asp.net 1.1 and asp.net 2.0 version?
2. Has anyone encountered this and resolved this?
Thanks
I believe the only way to get this to work is to uninstall the 2.0 framework, install the XIr2 for 1.1 framework msi file, install the 2.0 framework, then install XIr2 for the 2.0 framework.
Can't do the uninstall stuff because I got SQL Server 2005 and other .NET 2.0 apps running on the server. I got it to work by copying the .NET 1.1 versions of the Crystal DLL files (e.g. CrystalDecisions.CrystalReports.Engine.dll) from my PC to the server in the corresponding directory and then adding them to the assembly cache with the 1.1 Configuration tool. Don't forget the xxx.resources.dll files in the "en" directory also. In my case, I just needed to get the 1.1 stuff working. This is really bad and just adds another Crystal Reports horror story to my already very long list (I've been using Crystal for almost 15 years).

asnwer to 1 is yes, R2 supports both 1.1 and 2.0 framework. I'm not sure why you are receiving that error
answer to 2 is I haven't seen it but you may get more info if you can log a message with our deployment team.
regards,
Tim

SCCM 2012 R2 Install - SMS_NOTIFICATION_SERVER install fail - bgbisapi.msi could not install

Installed SCCM 2012 R2 Primary Site on the D: drive on a Windows 2012 R2 server. The install went as expected but when I open the Component Status, there are a number of Error messages which pertain to the failed installation of the SMS_NOTIFICATION_SERVER:
"Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
Here is the error from BgbSetup.log:
<01/16/15 14:53:55> Installing the SMSBGB
<01/16/15 14:53:55> Passed OS version check.
<01/16/15 14:53:55> IIS Service is installed.
<01/16/15 14:53:55> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<01/16/15 14:53:55> New SMSBGB is the same product code. This is a minor upgrade.
<01/16/15 14:53:55> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<01/16/15 14:53:55> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/16/15 14:54:04> bgbisapi.msi exited with return code: 0
<01/16/15 14:54:04> Installation was successful.
<01/16/15 14:54:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:08> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:08> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:12> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:12> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/16/15 14:54:12> Fatal MSI Error - bgbisapi.msi could not be installed.
<01/16/15 14:54:12> ~RoleSetup().
<01/16/15 14:54:21> ====================================================================
From what I've read online this problem seems to be born of installing SCCm on the D: drive which throws dotNET. A few people seem to have had some luck with editing two of the dotNET files (regsvcs.exe.config and InstallUtil.exe.config) to include
the following lines:
    <runtime>
        <loadfromRemoteSources enabled="true"/>
    </runtime>
In pursuit of a fix, I took backups of both files and then made the change to regsvc.exe.config but I was unable to do the same with Installutil.exe.config (opening the file in Admin Notepad would only let me Save As...).
Can anyone suggest what the problem could be? Am I barking up the wrong tree with the config file editing? Any info/advice would be much appreciated.
Thanks!

Hi,
You could try to copy Installutil.exe.config and edit the copy-file. Then copy the edited file to replace the old file.
Reference:ConfigMgr 2012 R2 – Notification Server Install Errors
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Embed fonts not available error (But they are available sysetm fonts)

Hello!
I tried to search and actually did found some answers regarding font problems, but they did not help. So I am explaining here my problem in hope that someone can help me.
My company bought a HP Xeon X3450 @ 2.8Ghz. @Gb RAM DD3 1333 with Windows 7 64-Bits version Professional.
We installed Adobe CS3 Suite on Windows 7 64-Bits version and the problems with fonts started.
We used to work with XP Professional before this new machine arrived and never had system fonts propblems with Adobe CS3 Suite.
Basically, what happens is:
When I try to open PDF files with embed fonts (system fonts susch as ARIAL for example) the program returns an error saying that the fonts are not installed/available, but checking the C:\windows\fonts, they are there and working fine on Office or other common application such as notepad for example.
I tried the workaround I found on these very forums of copying the fonts to the folder C:\Program Fils\Common Files\Adobe\Fonts and it still does not work.
Formated the HD and then installed Windows 7 32 bits (x86) and still have the same problems. All updates were made and applied to Adobe and Windows respectively for both 64 and 32 versions and the error still happens.
In resume, fonts are installed, they are system fonts but under Windows 7 64 or 32 bits versions they simply do not work when opening the PDF files with embed fonts.
-The PDFs had no problems before while running windows XP Professional.
-The PDFs open whithout any problems on machines with Windows Xp Professional.
-This is happening specifically in Adobe Illustrator CS3 and CS5 and Adobe Acrobat Professional 8 and 9.
Please, I urge for help since we don't know what to do anymore.
Thank you all who took time to read this and forgive my terrible english, it is not my first language.
Best regards,
Message was edited by: Andre Gurtovoi - Reason: added information.

Andre,
What I believe you have is 2 different versions of Arial, you old machine probably contains the version you need.
By old version, I mean one could by true type(XP), and another Opentype (WIn 7), and the error comes up. Even though they have they same name (Eg: Arial Bold).
There are even old version of fonts that are both of the same font technology format and have different FOND ID numbers(Eg: Frutiger was one that I often encountered, but you don't see this problem that much nowadays).

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook 5,1? The intel is different (2Ghz not 2.3) and the speed is 1067 not 1333. But they are both DDR3.

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook? The intel is different (2Ghz not 2.3) and the speed is 2000 not 1333. But they are both DDR3.
I have just upgraded the Pro to 16Gb and the MacBook is SO slow. Just wondering if I could use the old RAM.

Full specification of MB5.1 RAM;
204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
MBP8.1, 8.2 or 8.3;
204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
PC3 is the same as DDR3. the number is peak transfer rate (approximated).
Further reading suggests your swap may work, but it's not guaranteed. If you get 3 beeps on start up (or the sleep light flashing in bursts of 3), first check it's correctly seated, but be prepared to swap them back.
If you encounter any instability or kernel panics, change them back.

I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas?

I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas? Thanks.

yep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work.

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work. This problem only occurs whenever I am using my netbook. It doesn't happen when I use a different computer. I tried uninstalling and reinstalling itunes and am not sure what else to do from here.

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

HT4993 i will be texting somebody and i lock my ipod, then i see messages just pop up but they say from 5 mins ago.. but they just apperared on my sceen i know its not big but yea

Hey Everybody,
This is the situation: i will be texting somebody and i lock my ipod, then i see messages 10mins. just pop up but they say from 5 mins ago.. but they just apperared on my sceen?? Anyway there is no wait in between the message being sent and me recieving it?
Thankyou Eveybody !

I have the same question what time did you chat ? Just because you were speaking with someone that is representing Verizon does not mean you were speaking to a "Customer Service" agent. Customer service is only open during specific hours. After those hours the only people online is the Online Sales Department. It is very possible you were chatting with the sales department.

Firefox says "server not found".. but is found from other computers? whats wrong?

firefox says "server not found".. but is found from other computers? whats wrong?
== URL of affected sites ==
http://camaro5.com

See "Error_loading_some_websites": http://kb.mozillazine.org/Error_loading_websites [[Error loading web sites]]

I can not install the firefox for android from the android market. It is showing me that the app is incompatible with my device. Mine is LG P500 with version Froto 2.2.2. Any help ?

I can not install the firefox for android from the android market. It is showing me that the app is incompatible with my device and no other information is provided. I am not sure whats the problem with that ! Is it incompatible with the device or the android version ?
Mine is LG P500 with version Froyo 2.2.2. Any help ?
I was waiting to surf web with firefox from my phone for a long time. can anyone please let me know any known solution to it.

The mobile version of Firefox for Android requires a processor that supports the ARMv7 architecture, the LG Optimus P500 does not meet that requirement, it supports the ARMv6 architecture.

HT5312 Dear Apple , kindly i need to change my ID password but they want from me to answer two question but i forgot the answers , so i surprised that their is secure email and i didn't add it so how can change my password and change the secure email ,urg

Dear Apple , kindly i need to change my ID password but they want from me to answer two question but i forgot the answers , so i surprised that their is secure email and i didn't add it so how can change my password and change the secure email ,urgent plz

You a renot addressing Apple here at all.
We are all itunes users just like you.

Configure not finding dependencies but they are installed!

Hi, I was just trying to install pychosynth from AUR via yaourt, but configure just keeps complaining about SoundTouch and Liblo not being installed, however they are.
I tried to fix it by downloading Debian's Lenny libSoundTouch .deb file and then extracting the libs and links to /usr/lib but there was no luck anyways.
Here is my configure output:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBLO... no
checking for LIBXML... yes
checking for SNDFILE... yes
checking for SOUNDTOUCH... no
checking for VORBIS... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking for ALSA... yes
checking for JACK... yes
checking for OGRE... yes
checking for CEGUI... yes
checking for CEGUIOGRE... yes
checking for OIS... yes
configure: error:
*** You need libSoundTouch to compile the program.
*** Install it and run this script again.
make: *** No se especificó ningún objetivo y no se encontró ningún makefile. Alto.
And here's the AUR package I'm using:
http://aur.archlinux.org/packages.php?ID=16898
Thanks for your continued help

Ok, good and bad news.
It seems that it was missing some development libreries to compile, and because I couldn't find them elsewhere I decided to grab them from Debian's site, so I took lenny's libsoundtouch1-dev package and manually installed it, so now I get this while building:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBLO... no
checking for LIBXML... yes
checking for SNDFILE... yes
checking for SOUNDTOUCH... yes
checking for VORBIS... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking for ALSA... yes
checking for JACK... yes
checking for OGRE... yes
checking for CEGUI... yes
checking for CEGUIOGRE... yes
checking for OIS... yes
configure: creating ./config.status
config.status: creating libpsynth.pc
config.status: creating Makefile
config.status: creating doc/Doxyfile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating libpsynth/Makefile
config.status: creating libpsynth/version.h
config.status: creating config.h
config.status: executing depfiles commands
* Psychosynth 0.1.1: Automatic configuration OK.
* Configuration summary:
* 3D client (psynth3d) ..... yes
* CLI client (psynth) ...... no
* OSC support: ............. no
* XML config support: ...... yes
* SoundTouch support: ...... yes
* PCM support: ............. yes
* OGG support: ............. yes
* OSS support: ............. yes
* ALSA support: ............ yes
* Jack support: ............ yes
* Translations: ............ Not suported.
* Installation directories:
* Program: ................. NONE/bin
* Data: .................... /usr/share/psychosynth
* Library: ................. NONE/lib
* Includes: ................ /usr/include/libpsynth
* Type 'make' to compile.
* Then type 'make install' to install.
* Have fun!
make all-recursive
make[1]: se ingresa al directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1'
Making all in libpsynth
make[2]: se ingresa al directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1/libpsynth'
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/libxml2 -I/usr/include/alsa -march=i686 -mtune=generic -O2 -pipe -MT libpsynth_la-Director.lo -MD -MP -MF .deps/libpsynth_la-Director.Tpo -c -o libpsynth_la-Director.lo `test -f 'psynth/Director.cpp' || echo './'`psynth/Director.cpp
mkdir .libs
g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/libxml2 -I/usr/include/alsa -march=i686 -mtune=generic -O2 -pipe -MT libpsynth_la-Director.lo -MD -MP -MF .deps/libpsynth_la-Director.Tpo -c psynth/Director.cpp -fPIC -DPIC -o .libs/libpsynth_la-Director.o
In file included from ../libpsynth/common/ControlBuffer.h:27,
from ../libpsynth/object/Object.h:33,
from ../libpsynth/table/Patcher.h:30,
from ../libpsynth/table/Table.h:32,
from ./psynth/Director.h:29,
from psynth/Director.cpp:24:
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:80: error: '::memchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:81: error: '::memcmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:82: error: '::memcpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:83: error: '::memmove' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:84: error: '::memset' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:85: error: '::strcat' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:86: error: '::strcmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:87: error: '::strcoll' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:88: error: '::strcpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:89: error: '::strcspn' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:90: error: '::strerror' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:91: error: '::strlen' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:92: error: '::strncat' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:93: error: '::strncmp' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:94: error: '::strncpy' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:95: error: '::strspn' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:96: error: '::strtok' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:97: error: '::strxfrm' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring: In function 'void* std::memchr(void*, int, size_t)':
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:101: error: invalid conversion from 'const void*' to 'void*'
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:101: error: initializing argument 1 of 'void* std::memchr(void*, int, size_t)'
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring: At global scope:
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:103: error: '::strchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:109: error: '::strpbrk' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:115: error: '::strrchr' has not been declared
/usr/lib/gcc/i686-pc-linux-gnu/4.3.0/../../../../include/c++/4.3.0/cstring:121: error: '::strstr' has not been declared
In file included from ../libpsynth/table/Patcher.h:30,
from ../libpsynth/table/Table.h:32,
from ./psynth/Director.h:29,
from psynth/Director.cpp:24:
../libpsynth/object/Object.h: In destructor 'virtual psynth::Object::InSocket::~InSocket()':
../libpsynth/object/Object.h:141: error: 'for_each' was not declared in this scope
make[2]: *** [libpsynth_la-Director.lo] Error 1
make[2]: se sale del directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1/libpsynth'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio `/tmp/yaourt-tmp-ltsmash/aur-psychosynth/psychosynth/src/psychosynth-0.1.1'
make: *** [all] Error 2
Have you got any ideas of what went wrong?
Thanks.

HT5994 I installed Mavericks and lost all my iWork '08 files. Not really lost but they show up with inverted colours, white text, and impossible to edit. Pages 5 appeared to be a great disaster, and can't even open my old files. I want the old iWork back!

My music editing program Finale can open files from the 90:s. Pages 5 can't open files I made half a year ago in Pages 08.
Some difference in knowledge there.
5 years work is gone, if Apple are inable to fix this. Perheps they are?

Completion: You can change the word "knowledge" to "craftmanship". "Some difference in craftmanship there."
I have tried to update my former iWork with updates from the app store. Mavericks refuses to open them. Mavericks tells me "Can't open, because they are from an unknown source". My iMac tells me that Apples app store is an unknown source.
Just can't believe how Apples software developers could get permission to turn somethiing rally, really good to this really mediocre version pages 5. The opposite to development if you ask me.
What were they thinking?
I'm angry.

MSI StarCam not installing

My Windows Hardware Update Wizard is not installing the web camera!
I found the .INF file but it still does not install.
My system meets all the requirements except one...
I am using Windows XP Pro x64 operating system.
Where can I get proper drivers or should I return the camera?

you need 64bit drivers to run any device in Windows XP x64. the 32bit drivers included on the CD won't work
look on the MSI website for the product support page for your device (click on Products right up top here, and then navigate to your product), if there are 64bit drivers available there, then use those
if there aren't, then you're stuck, and your webcam won't work
try contacting MSI support (How to contact MSI.), see if they have any plans for x64 driver for this device. if not, and you really must use XP x64, then you may have to change to an alternative device which has x64 drivers available
good luck!

XML Core Services Not Installed Properly but Cannot Remove

I needed to install the XML Core Services on a Windows 2008 R2 Standard x64 server with SP1 as a prerequisite for some other software. I downloaded the file msxml6_x64.msi and installed it, but the other software said it was not there. I tried to
do a repair and to uninstall the software, but both times it also said the software was not installed. So, I tried to install the software again and it said it was already installed. Did I download the correct software? More importantly, how do I get
this thing off my server? Does anyone know a good KB article. I could not find any that really addressed this problem.
BGCSOCAL

Hi BGCSOCAL,
à I downloaded the file msxml6_x64.msi and installed it
Would you please let me know the link which you used to download the msi file? Did you get any error message
when install it? Meanwhile, please check log file if find errors which may be related to the installation.
Please refer to following KB and check if can help you.
How to install Microsoft XML Parser and Microsoft XML Core
Services (MSXML)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

.msi do not install normally, but they do from terminal msiexec

Similar Messages

Maybe you are looking for