MSI FX5900XT VTD-128 = very poor card

I'm starting to regret buying this card and wish I had waited for a 9800 pro. I only get 4174 on 3dmark 03 (52.16 driver) and Far Cry played better on my previous card which was a GF3 ti200.

chrislees,
If you want to monitor your temps on various components you can use
“Comp-U-Nurses”, “Matrix Orbitals” and or a “Digital DOC”, I use
them all on my rig and they work great! The least expensive unit’s are
the Comp-U Nurse, there $5.00 or something like that!
Some of the things I like about the Comp-U-Nurses are their cost and
you don’t need to rely on your rigs PSU, plus you can watch your temps
on whatever component you want, even when your rig is powered off!
Also highspeedpc and Bestbyte have some nice little heatsinks for
your video card memory and other things like MB voltage regulators,
chipsets, or just about anything that needs to be cooled down!
Here are some places, I believe sell those products:
Matrix Orbital – http://www.matrixorbital.com
Comp-U-Nurses – http://www.highspeedpc.com or http://www.Bestbyte.net
Digital Doc – http://www.newegg.com or http://www.Tigerdirect.com or http://www.Directron.com
Good luck and have fun with Overclocking, just remember to watch your temps!
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Chipset Drivers v3.13
nVidia VGA Drivers v56.72

Similar Messages

Msi Fx5900xt Vtd 128 Driver.

What driver NVIDIA WHQL for MSI FX5900 XT VTD 128 have maximum performance?
THANKS!

for me, the most stable driver is the 56.72. i am running my msi nvidia fx 5200 really stable and its overclocked.

MSI FX5900XT VTD-128 PCB length

hossa!
could someone please tell me the length of the bare pcb only (without slot-metal), i'm not sure if it will fit my case..
thanks a thousand times!
stefan

20cm aprox...

MSI GE70 2OE-015NL very poor performance on battery power

Hey guys,
First of all I want to say that I'm really happy with my GE70 notebook. Everything works perfectly fine except for this one thing... When I play games on the notebook while on battery power, the performance is very poor. For example when I normally on AC power get around 250 FPS, it drops down all the way to around 40-60 FPS on battery power. In real demanding games this can be very annoying, since I have to play on AC power constantly for games like Battlefield 4. Although this isn't really a problem for me most of the time, I just don't think that's the concept of a notebook... I monitored some statistics using MSI Afterburner and I noticed that the GPU's core clock is clocked all the way down to a constant 135MHz whilst gaming and the memory is clocked all the way down to around 400MHz. I'm using a GTX 765M. I've already tried changing settings in the Windows power settings, the NVIDIA control panel and I even looked into the BIOS, but I couldn't find a solution to this problem. Apparently the GTX 700M series GPUs support Optimus technology which should give a decent battery life using the full power of your GPU, but for me it doesn't do so. The battery gets drained in around 45 minutes while gaming on very poor performance. I hope you guys can help me out!

Oyo,
All Gamer NB are not done for play in battery mode, battery life are short and the power provide by a battery are far from the power adapter, this mean the NB get less power and your CPU and VGA are working in lower mode = lower result.
This is normal because link to the battery, thepower adapter provide 120W, the battery 49W, you see the gap between them ^^
So for play games, use the power adapter and the battery together, this is the best way.

Msi 5200 Vtd 128

I have a problem with choosing my nview mode, I cannot choose dualview or clone mode. It only displays 1 item, single display only. I already updated my driver to 53.03 but still doesnt work. I can choose whether to display analog or tv but I want both to work simltaneously and to display in clone mode. My tv out is working ok when i choose to display it on tv but my monitor goes black.
SPECS :
MB - MSI 845 GE MAX / P4 1.8 GHZ
MEM - 256 DDR
OS - WINDOWS XP PRO SP1
MONITOR - SAMSUNG 151 S LCD SYNCMASTER
My old video card was working ok with clone mode, it was a geforce 4 mx 440.
please help.

Hello, thanks for answer. I can tell you that my monitor is a ViewSonic E771 and there is no driver for Windows 2k in the Homepage of ViewSonic because Windows 2k auto detect it.
In the monitor tab of "Advanced options in the Display panel" it says: "Monitor tipe: ViewSonic E771". I don't trust in microsoft drivers very much, but in this case I have no choise, there isn't another driver for this monitor in the world! but what I can do is to try with another monitor to see if it work, then I tell u.
The extrange thing is that before with my GeForce 2 MX 400 I had the same computer, same windows, same monitor and same TV and everything was OK.
I'm already loosing hopes in that someday I'll have my TV and monitor turned on at the same time with my VGA!
Thanks again...

MSI NX6600GT VTD 128 utility software

I just buy MSI 6600GT,the problem is I can't run the hardware monitoring tool for the VGA(3D!TURBO).
After I finish the instalation and running the tool I didn't see any result.Memory clock: N/a,fan speed:N/a
I have installed flash player,update the software(3D!Turbo),and I am using windows Xp SP 2.
Anyone know to solve the problem?Thx

servo85,
I never use any of the Shovelware that comes with the Hardware. You are better off using the nVidia ForceWare Drivers and in there you have clock speeds.
Take Care,
Richard

FX5900XT VTD 2 Dead Cards??? Help

I bought a FX5900XT VTD 128 used it for a week and loved it ,,,then the card dies wile I was playing Call of Duty.
I sent it back and the they replaced it no problem, they said the card was bad and that it could be the 1 out of 1000 that was bad..so I recieved the replacement card after 2 weeks of wating and now my AMD will not post with the card in. I tried the fx5200 and an old g4 the AMD runs fine with both so i cleared my cmos and tried 2nd time still no post. I decided to try my 3.2 intel, and same problem. Nether of my computer's will boot with this MY 2ND CARD does anyone have any suggestions.

RMA the RMA..
The same "happens every 1000 cards" applies here too. I had 4 RMA's on a Western Digital drive until I got one that was satisfactory.
Sucks but it's the nature of the beast sometimes.
Just curious, what power supply do you have in the AMD rig?
Post the corresponding amperages for the +12v, +5v & +3.3v rails. The information can be found on the sticker on the side of the power supply.

PROBLEM: MSI NVIDIA 6600GT VTD-128(AGP) COLOR LOST

Hi guys,
i have a problem with my MSI 6600GT VTD 128 (AGP)..the blue color is lost..so now, my graphic colors are only green & red..Anyone have any suggestion on how to fix this? btw, my warranty is over..

Quote from: wildsurf on 10-June-07, 14:23:42
Thanx BOSSKILLER,
yes, i'm sure i've plugged the monitor cable perfectly..i even tested it with 2 pc and monitor and the colors are only red & green..the blue color seems to be lost..Can you tell me how to fix it?
have you tested with different monitor too? check VGA cooling system as well.

Internal TV Support FX5900 VTD-128

I have a MSI FX5900 VTD-128 and I am trying to figure out the TV support.
What is meant by "Internal TV support"?
Does this enable a cable connection or aerial to be connected?
What does the channel control do if it does not?
Iss additional hardware needed?
Sorry if this sounds stupid, but the manual says nothing.
rgds
CB

Ive plugged a coax cable in from the Cable box. so wheres the picture. tell me what you have to do what programs etc..., Becuase the TV is grayed out in the media centre.

Does MSI fx5900 "SP"-VTD 128 support temperature monitoring?

Hello everybody!!!
I really need someone's help here.I recently used the coolbits hack to overclock my card(MSI FX5900 SP-VTD 128).It runs fine after overclocking but the problem is that I can't monitor the cards temperature!!!
I used both the 3D Turbo Expirience and the registry hack to add those DWORD values that enable the thermal monitoring,but even after that I couldn't see the card's temperature!!!
Is there anyone who can give me a solution to this problem?I really don't want to damage my card by overheating it!!!

I have the same card as you the MSI FX5900SP 128VTD and it does have temp monitoring, i has used different drivers and my temp monitoring tab has always worked o.k, you may have damaged it already if you are excessivly O/C the card, i can only get mine to 465/812 before i start to see affects or lockups, so that may be the case, i am looking to flash my card though with a bios from a FX5900U to get the O/C that i want but i want to know if its been done first , i know you can do a FX5900U to a FX5950U so why not a FX5900SP(XT or SE) to a FX5900U?

[VIA] MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card

Does any body out there know if a MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card will work well together?

like the grayone say, is true. for more ensure, try and search the graphic cards support list for your board at MSI (Sorry cause i don,t no is where the site located)
in my opinion, most is compability for your card, when is a AGP slot.
Except the new one like the AGP slot, call AGR( Accelaration Graphic Riser slot) that really need to find a compatibility graphic cards.....

May I use MSI FX5900XT with Adobe Premier 1.5 to capture analogic video?

Hi Folks,
Does anyone know if it is possible to use MSI FX5900XT with Adobe Premier 1.5 capturing video ?
I am trying to use this software to capture video and I see that Premier does not recognize it. I can normally capture with Virtual VCR or VirtualDub.
Is there any plug in or driver to permit Premiere recognize the MSI FX5900XT ?
Regards,
Mario Rodrigues

In the Adobe site there is no mention about Nvidia Cards.
I think it is stranger because the capture with Nvidia Cards are becoming very common nowadays.
I would like to know if someone has tried to capture with Adobe Premier using MSI FX5900XT.
Mario

MSi website support not working - poor service!

MSi website support is not working. Everytime I try to contact them using the support tickets I get a garbled message on screen and once you click the OK button it clears your ticket with nothing posted.
It's a very poor way for a company supposed to be a BIG company showing support to its customers.
You can't telephone them, cannot now use the ticket support, and can only HOPE someone from their technical department reads THIS.
I sent them an email about it and I'm just waiting to hear from them.
It makes me want to change to ASUS in future!

Ok I'll try to remain calm as I've just received a warning about "bashing" MSi.
I'll include the screenshot again for your attention. At least the moderators here are reviewing the situation it seems, which, on a large forum, I didn't think would be noticed.
After going through advice of how to update my BIOS with their technical help on the website I flashed my MSi Z68A-GD65 (B3) successfully to version 22.8. It was playing up before that on the orginal BIOS, slowing down in Windows, not recognizing various USB devices, and I had a Primary BIOS led flashing which meant it had failed on the mobo so the computer wasn't coming out of 'sleep' very good (I just left it on all the time instead).
22.8 made it seem to be at it's best then I contacted them on which update next; they said P.1. Unlike the previous one which I flashed inside the BIOS using M-flash, this had to be done in DOS which I did.
I saw a brief message which I think said updating should not be done while it is overclocked (I had the OC button on) but other than that it went through and said update was "successful". That was the last message my machine made.
It is now in a constant 'boot loop' which lasts about 10 seconds, not enough time to interrupt or use a boot device, and just cycles switching off to booting then switching off, etc.
I've seen many cases of this and it must be a common problem, as I did everything as instructed and still it went wrong.
After lots of communication MSi UK agreed to inform the service department for a RMA to be sent to me, even though it was out-of-warranty. Then they closed the ticket. I opened a new ticket asking why they closed the ticket and I still had not received any RMA, they told me not to worry the RMA will be coming, then closed that ticket.
After waiting 10 days I tried to use the website form again filling out all the criteria on the form and instead I get this garbled writing with the OK button as I mentioned, which just sends you back to the home page with nothing updated.
So I am really frustrated at this point, unable to phone MSi (they won't talk to you), use the website (in UK) and have had to explain everything through an email correspondence, hence my lack of patience on this forum.
For years I put my faith in MSi products, I have a Nvidia graphics card also, and they are the market leader with the best looking designs and most powerful components. But they should provide better customer support when things go wrong and are failing anyone who resides in the UK with a website service which doesn't work, and closing tickets before the problem has been sorted or the RMA has been sent.
I hope you understand.

MSI FX5700 128TD vs. MSI FX5600 Ultra VTD128 vs. MSI G4Ti4600 VTD

can someone test these 3 cards and make a compare result?
comparing performance, image quality
of course PC components must be the same at each tested card
VGA cards: MSI FX5700 128TD
MSI FX5600 Ultra VTD128
MSI G4Ti4600 VTD
THX
TT*6

Thanks a lot friends.
Every thread i created was about FX5700 because i own this card and thought that i made a wrong decision with that card -MSI FX5700 TD128- now i know it was a good buy.
Only 1 question left: why is the fill rate of FX5700 so poor and at G4TiSeries so high-2x much, does it have affect in compare to G4TiSeries?
TT*6

The MSI FX5900XT has a cut down memory bus?

According to MSI's VGA product list the MSI FX5900XT has only a 128-bit memory bus. Is that a typing mistake? --because the FX5900XT benchmarked on Tom's Hardware has a 256-bit memory bus.
Tony.

It Must be a Typo, as there is No Way that NVIDIA would Let one of their Licensed Card Manufacturers even MSI, Cripple the Reference Design like that ......Chopping some Memory and Core Speed off of a Referece Card Design is one thing, But Changing the Whole Memory Pipelines Archetecture............Sean REILLY875

MSI FX5900XT VTD-128 = very poor card

Similar Messages

Maybe you are looking for