MSI Install and Pass Computer name to Logfile for each install

Hi all,
I'm running this script in Computer Startup with GPO.
msiexec /i app10.msi /update app20.msp /l logfile.log
/qn
How do i pass computer name to logfile for each install?
As

Hi,
Thanks, Can i append anything after %computername% ?
Like %computername%_Melb.log
As

Similar Messages

Snow Leopard 10.6.3 upgrade issues.. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free) and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
Was there no warning dialogue after the unsuccessful install?
Message was edited by: noondaywitch ; link added

Installing and troubleshooting the Telstra 24x7 App for Blackberry

Installing the app
Click on the BlackBerry World™ icon and then search for Telstra 24x7
Click on Install to start the process. The App is provided subject to its own End User Terms
Click Accept & download
Click on the icon once the app has finished installing to launch the app. The App has been designed specifically for use with BlackBerry smartphones running operating system 10 (OS 10). As of July 2013, the models available that will work with the app are the BlackBerry Z10 and BlackBerry Q10.
Troubleshooting
To access the full features of the app, you are required to log in using your My Account.
You can use the app without logging in to My Account; however the application will have limited functionality. If you've skipped the My Account log in - you are still able to log in by following these steps:
Select the Settings icon (two cogs) from the menu screen
Select Manage services, provide username/password in My Account login panel
Select Connect to My Account
If you have trouble logging in:
You'll need to either be connected to 3G or Wi-Fi - check that you can browse to a website
There may be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
Make sure your Username and Password are correct. If you forget either of these, go to the My Account login page and follow the instructions to reset your Password or retrieve your Username
If you receive an account restriction error message
You aren't a Legal Lessee, Full Authority, or Limited Authority on the account. Only these account holders can access the account functionalities of the App OR
You're a Telstra Business or Enterprise and Government customer. Telstra 24x7 App currently only supports Telstra Consumer customers
If the app can't connect to My Account
Ensure your data connection is enabled, either via 3G or Wi-Fi. Please note that if you connect via 3G on a Telstra service without logging into the App, we may be able to automatically retrieve some service details about your device, but not all functionality.
There may be a high volume of users - wait a few minutes then try again.
Note: You will not be able to register for My Account within the app. This feature is currently not supported in the application. However, to create your account, navigate to the My Account registration page from your computer or laptop.
Usage not displaying
Telstra 24x7 App is unmetered for mobile data usage within Australia when on the Telstra network with the following exceptions:
Store Locator with map view set on
Help and Support - Using 24/7 Support on Twitter
Help and Support - Accessing 24/7 Support on Facebook
Standard data charges will apply when downloading the app from BlackBerry® World™
Note: Standard International Roaming charges to access data through a mobile internet connection will apply when roaming overseas.
Estimated usage will be shown in the same display format as mobile services and will appear for select Telstra broadband services.
You will be unable to see 'My Usage' data for all My Services at this stage. We currently only support usage information for Pre-Paid mobile services, mobile services on a plan and select broadband services.
The app may not be able to update your usage details for a number of reasons:
There may be technical issues connecting to Telstra systems - if this happens, wait a few minutes then try again
You may not be logged into My Account. Check by going to Settings then Select Manage services
You might not be connected to the internet, try opening Safari and visiting a website.
At this stage only newer and select BigPond then Internet services are supported.
Why are my recent charges on the app different to what I can see online?
The recent charges on the app is different to what is displayed online in order to help you gauge your current, pre-bill estimated usage. The final list of charges will appear on your bill.
Bill summaries may not be displayed for a number of reasons:
The app currently only displays a summary of your current bill and 7 months prior. All previous bills are accessible via theTelstra My Account website. To further drill into your bill details and information, please visit Telstra's My Account website to view your itemised bill. Service details are the Telstra services associated to the bill you are currently viewing.
A bill may net yet have been issued
There may be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
You might not be logged into 'My Account'. You can check if you're logged in by viewing Settings then Manage Services. If you skipped the 'My Account' registration, the app may be able to display limited usage and service details, but you will not be able to view bill summaries
You might not be connected to the internet, try opening Safari and visiting a website
The app may be unable to update your bill information for a number of reasons:
There might be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
You might not be logged into 'My Account'. You can check if you're logged in by viewing Settings then Manage Services. If you skipped the My Account registration, the app may be able to display limited usage and service details, however you will not be able to view bill summaries
You might not be connected to the internet, try opening Safari and visiting a website
Bills can be paid via the app, and all payments will occur within the Telstra 24x7 App and you'll have access to a stored payment method.
You can choose to receive bills via email through the My Bills screen. When viewing the bill history, click the email icon in the top right hand corner of the screen. You will be prompted to review and accept the terms and conditions, once accepted you are required to enter and confirm your email address. Once registered to receive a bill via email, you can edit the email address via the App. This is achieved by following the same process as to register - the option to edit the email address will be presented to you in the app. If you want to change back to paper bill, you'll need to log into your My Account from T.com to change back to receiving paper bills.
My Services not displaying
You can add your Pre-Paid service to your My Account via a computer to ensure it's displayed.
The difference between My Usage and My Services
My Services provides a full list of your accounts and services linked to your My Account profile.
My Usage provides a list of your mobile and select internet services which have associated usage information.
The Telstra 24x7 application only shows the following services:
Service details associated with your My Account user profile
Service details for the current device you're using if you haven't logged into the app
New services may take up to 48 hours before they appear.
At this time, services are not able to be added within the app. To add and view a service within the app, you'll need to login to My Account or you can us on 13 22 00 anytime.
The app might be unable to update your list of services for a number of reasons:
There may be technical issues connecting to Telstra systems to obtain data if this occurs, please wait a few minutes then try again
You might not be logged into My Account. You can check if you're logged in by viewing Settings then Manage services
You might not be connected to the internet, try opening Safari and visiting a website
Pre-Paid recharge
Recharge is currently only available for your Pre-Paid services associated with the My Account login you're using or the device you're using if you are a Telstra mobile customer connected via 3G.
Tap Recharge within the side bar to view the Pre-Paid services available to recharge. You can then recharge the following ways:
Within the App by using a stored credit/debit card associated with your Pre-Paid service. Simply select the recharge amount, tap continue, and then enter your recharge PIN. If there is no stored card found, you will be presented with the option to recharge in Safari.
Using a voucher - simply enter the 12 digit authorisation number and tap continue
Online, via SMS, Facebook® and my phone
When you recharge online you're provided with an option to store the card details along with your account. You'll also need to set a PIN for your credit card. Once this step is completed, you'll be able to access the stored card with the app and recharge using your PIN.
Your PIN is associated with the stored credit/debit card on your Pre-Paid service. Recharge online to store a credit card against your Pre-Paid service. Note: You must be connected via 3G.
There are a number of reasons why your recharge might be failing:
You have provided an invalid PIN
Technical issues connecting to Telstra systems to complete recharge - wait a few minutes then try again
You have failed to provide the correct PIN 3 times
You only have 3 attempts at providing your PIN. After you've failed 3 times, your stored card details will be deleted and you'll need to add it to your account again by recharging online.
Your account may be suspended due to multiple failed recharge attempts.
Plus Packs
Click on the View Bonuses and Plus Packs to view the amount of bonuses and plus packs remaining as well as the expiry that's associated to your current Pre-Paid mobile number. You'll need to recharge your Pre-Paid service and the amount of bonuses that you'll receive is dependent on your recharge amount.

Re: Installing and troubleshooting the Telstra 24x7 App for Blackberry
I have personally phoned Telstra to advise I continue to receive an account for someone else. It has happened again to day. Please check you records and make sure I no longer receive any accounts for 2000133289692. This is not my account. L. Service.

HT1923 I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit. I keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinst

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there any e

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there anybody out there that can help me figuire outhow to make this work?

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabl

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.

trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type.

Create standby maximum number of logfiles for each thread

The oracle doc states this equation for appropriate number of standby redo log file groups
(maximum number of logfiles for each thread +1) * maximum number of threads
How do you get the maximum number of logfiles for each thread and the max thread?
Thanks!

If you are running RAC you can, in theory, be running with a diferent count
of Online Redo Logs in each thread (instance).
However, normally, you would have the same number of Redo Logs in each
thread.
The theoretical max is prescribed at the CREATE DATABASE and can be
changed with a CREATE CONTROLFILE. If you do an
ALTER DATABASE BACKUP CONTROLFILE TO TRACE
the sql script in the tracefile shows the maximum number of logs and members.

How to name the data for each column I am acquiring in lvm file

does anybody hint How to name the data for each cloumn I am acquiring in lvm file.
I want to tag or name ,eg temperature at top of a column which shows the temperature readings .I am writing into a labview measurement file.
Thanks

Use Set Waveform Attribute on each channel of your data. Set an attribute with name "NI_ChannelName". The value is a string containing the name you wish to call the channel.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Maximum number of logfiles for each thread

Hi all,
When I configure a Standby Redo Log, to determine the appropriate number of standby redo log file groups, I should use the following formula:
appropriate number of standby redo log file groups: (maximum number of logfiles for each thread + 1) * maximum number of threads
My question is: how can I determine the maximum number of logfiles for each thread ? Is it the online redo log file per group? or total of redo log files in all groups?
SQL> ed
Wrote file afiedt.buf
1* select group#, thread#, sequence#, members from v$log
SQL> /
    GROUP#    THREAD# SEQUENCE#    MEMBERS
         1          1         40          1
         2          1         38          1
         3          1         39          1

user8994263 wrote:
Hi,
If you have 5 redo log groups on primary, do you suggest to create 6 standby redo log groups on standby?
If yes, why ?
-KalidasYou did two mistakes
1) Responded to old question Posted: Jun 1, 2010 8:52 PM
2) Its not your question & asking into others threads.
-- Please lock this thread

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Does this sort of software exist?

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Imagine a spreadsheet - each time a write something in a cell and press enter to go into the next cell, I need the app/software to automatically insert the corresponding dat and time. Does this sort of software exist?

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Computer name keeps changing after Yosemite install

My iMac keeps getting into some sort of conflict with itself that causes it to rename itself.
It's normally "Pajundrum's iMac". A morning or two after installing Yosemite, I got a message on my iPhone that my Apple ID was being used on a new device, "Pajundrum's iMac (2)". I can go into the System Preferences->Sharing and reset the name, but if left it will keep incrementing itself.
If I'm using the computer when it happens, I get a message stating, "Another device on the network is using your computer’s IP address."
This is the only iMac on the network. It is only connected to the network one way (through WiFi).
I've tried reseting my router, but that didn't seem to affect anything. Does anyone know what could be causing this, or how to resolve it?

Regarding to this, there're two different solutions how-to fix this issue:
Go to System Preferences -> Energy Saver. Select "Power Adapter" and then uncheck "Wake for network access".
Go to Macintosh HD > Library > Preferences > SystemConfiguration and delete the following files:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
and reboot after. They'll be recreated correctly after that.

File to File and then Call ABAP Program and pass file name and location

Hi
I am new to PI and am working on the following requirement and some guidance would help:
A file is picked up from a third party server using FTP and is put in an SAP server in a specific location. After I have put in the file successfully, I need to call an ABAP program and provide the name and location of the file for further processing by the ABAP program.
Although I am familiar with File to File, how can I add in the ABAP call with the filename and location? I do not want to pass any other information to the ABAP program.
Thanks for your help.
Manoj

I think I get what you're saying. This additional file would have the file and the path in it's content. I would then use this as a source (FCC?) for Mapping with the RFC. Right?
Exactly and yes, FCC would be helpful
Would you have a sample OS script to do the above?
Actually it depends on the operating system on which your PI system is standing. For instance for Windows, you might try with the following as a start point (but I was not able to test it, so I can't guarantee it will do the job):
cmd.exe /C "%f %F > C:\target_directory\%DATE%_%TIME%.txt"
In case you needed more, try googling on "windows batch script" or similar.
Hope this helps,
Greg

Netboot computers and netbooted computer name problems

i have 14 imacs that i netboot. prior to tiger the netbooted computer names would be assigned noramlly say netboot001, netboot002 up to 14.
with tiger and the system image utility when i run a new netboot image sometimes the computer name is netboot001 etc and sometimes it replicates out say frederick charrons computer(1), frederick charrons computer(2).
i assume that there is a problem in the way the computer names are dished out to the netbooted imaces and there fore i assume there may be a potential for prblems with information back and forth to the server. can anyone help me with this and offer a solution that i may be missing.
i have been netbooting imaces since imacs and server were made available and this is the only time that i hav experienced this problem, ile with tiger server.
osx server Mac OS X (10.4.5)

There is not a problem with having identical usernames on two different computers. You also suggested the "Computer name" was the same. Is this the computer name at the top of the "Sharing" preference panel? If so, those need to be different.

Hi firefox i wanted to disable my ip adreass and my computer name

hi i have problems with torrent website they tracking my ip adress and try hack my computer i wanted disable ip address and computer name i am use wireless connection is that any possible can i get new ip address i don't split my personal information to know other guy

Hi @RicardoAlmeida ,
Thank you for your query, I will do my best to help!
I grasp that you are having an issue with your switchable graphics and HP support referred you to a bios update.
You can run the HP Support Assistant to aid with HP updates. Here is a link to the HP ENVY dv6-7300sp Notebook PC Drivers where there is a bios update if it has not been done previously. Updating the BIOS. As a bios update does have the potential to cause damage, I suggest contacting HP support for assistance.
As you do have switchable graphics I believe this document is the one you require, It will help you configure your graphics.
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Best of Luck and
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MSI Install and Pass Computer name to Logfile for each install

Similar Messages

Maybe you are looking for