MSI K8N SLI Mobo (with 24 bit SB Live!) and XP64, no driv

There are no drivers to be found anywhere for the onboard 24 bit SB Li've! chip on the MSI K8N SLI platinum motherboard. It's quite confusing really, seeing how it's a board designed for 64 bit processing yet there are no drivers for the Li've! chip. I'm assuming the drivers are in Beta development, is there a tentati've release date, even if it's November, it's better than not knowing anything. I love my 64 bit system but it really stinks having no sound.
Jan Gonsalves

As I stated in the original post, I am looking for 64 bit drivers for the Sound Blaster 24 bit Li've! chip that is onboard the MSI K8N SLI Platinum Motherboard. The "preview" drivers, as noted in the release notes:
(http://preview.creativelabs.com/Lists/Announcements/DispForm.aspx?ID=6&Source=http%3A%2F%2Fpreview%2Ec reativelabs%2Ecom%2Fdefault%2Easpx)
2. SYSTEM REQUIREMENTS
One of the following supported audio cards:
Creative SoundBlaster Li've! (except Li've! 24-bit)
Creative SoundBlaster Audigy (except Audigy LS)
Creative SoundBlaster Audigy 2 (except Audigy 2 NX)
These do NOT support Li've! 24 bit. In fact, on the Discussion board at the preview website, a moderator wrote this:
(http://preview.creativelabs.com/Lists/General%20Discussion/DispForm.aspx?ID=344&Source=http%3A%2F%2Fpreview%2 Ecreativelabs%2Ecom%2FLists%2FGeneral%2520Discussi on%2FAllItems%2Easpx)
"It is not a site for asking for the Li've 24-bit/Audigy LS/NX drivers (32-bit or 64-bit). If you want those drivers, post at the official Creative forum or contact technical/customer support. That will get noticed. No one reads this site except for the people involved in the 64-bit driver preview for hardware listed in the release notes."
So, according to that email is says this list is responsible for producing 64 Bit drivers for the SB Li've! 24 bit chip. I would like to know which group is responsible for the drivers and when these drivers are TBA. Like I said, rough estimates are fine, I just want to know SOMEONE is working on it.
Jan

Similar Messages

Recommend me a PSU for MSI K8n SLi Mobo

I recently purchased a MSi K8n SLi Mobo with a X800XL GFX Card and was sold a Hiper 425 PSU, after getting everthing home a built it has come to my attention that to make the onboard sound work, that Pin 20 on the PSU must be -5. The PSU that was sold to me does not carry this pin 20 -5V.
Can somebody please recomend me a PSU that will have this -5V pin at Postion 20
Thanks for any Help
Az-Hudson

Quote from: kctay on 03-March-05, 01:01:05
Turbo Cool 510-SLI
http://www.pcpowerandcooling.com/products/power_supplies/highperformance/turbocools/510/
But I see that you have an ATI video card? Does that mean that you have no plans to actually use the SLI component? This makes a big difference since one card requires much less power.
I was lucky enough t have won my GFX Card, but i do plan on eventually going SLi
And thanks to all who replied

MOVED: SLI won't stay available on MSI Eclipse SLI mobo with 2 EVGA GTX 280s

This topic has been moved to Intel Core I7 boards.
https://forum-en.msi.com/index.php?topic=122254.0

I have 2 GTX 280 running in SLI with the new driver 182.06 vista 64 bit and everything works just fine.
First remove the physx software , than the nvidia driver with ad / remove programs in the configuration panel.
Restart you PC than install the new driver (182.06 vista 64 bit) and the new physx software (9.09.0203) is automatically installed with the driver. This is how i did it.
I use evga precision 1.4 tool for my GPU's and GPU-Z and there it is confirmed that sli is working as well in the nvidia controll panel.
My motherboard driver is 1.4B3.
CPU = i940 at 4083MHZ 177.6x23
Mem= 12GB Corsair XMS3 1333 at 1420MHZ.
PCI fix at 37.3.

SATA II Drive on K8N - SLI Mobo

Hello Folks,
Please can you give a few words of wisdom on the following topic:
I've recently upgraded to the K8N - SLI mobo with AMD 64 3200 CPU, 1GB ram and a Hitachi 250gb SATA II drive.
I booted from the WinXP disc, selected F6 to install additional raid drivers, accepted, and proceeded to install XP which works fine. The system boots ok but the BIOS (flashed using MS Live Update to version 2) shows the drive as 5th IDE master, and then WinXP "system, device manager" shows the drive as Primary ATA.
Is that right? It works but how do i know it has detected it up right?
I've disconnected my original 2 hard drives from IDE1 for simplicity, and the 2 optical drives load fine on the IDE2 cable. My RAID drivers come from the Nvidia site since i didn't get a diskette with the OEM drive.
Did i need to install the drivers from a floppy (i have an MSI CD)?
When asked for 2 separate drivers which should come first, the RAID driver or the STORAGE CONTROLLER?
Is everything normal? Should the drive be called SATA type somewhere?
Many thanks for your help.
mick

Thanks for the reply there Petrol. I thought the raid drivers were the name for the SATA drivers i.e. one and the same thing, so although I will not use RAID, I think i need still need the RAID/SATA driver?
I thought I had just cracked it- a short time after providing the extra 2 RAID drivers during the boot, WinXP asked me again for the RAID driver (which i read elsewhere was a good sign!).
It appeared to boot faster or was it just my imagination hoping for a result?Then once the WinXP desktop had come on, it appeared to load some more drivers.
Still when i look in "System....Device manager" the driver is from Windows from 2001 so can't be up to date?
Has it managed to write over the top of the newer SATA drivers during the final part of the install (if so how to turn it off?)?
thanks again
mick

Msi K8n sli-F

Does the opteron 148 work in the msi k8n sli-f with the second bios release? I just want to know if a bios update is required for the two to work. I could test it out by swaping mobos but i need to use my computer at the moment

I believed it can works since your opty is a single core and there no need for you to flashed your bios since the bios can be supported dual core. Gd luck.

Linux support for SB Live 24 bit on my MSI K8N SLI Plati

I've one problem: SB Li've 24 bit PCI come with LINE-IN and MIC that are the same jack.
With my motherboard MSI K8N SLI Platinum I've an integrated SB Li've 24 bit that however has one jack for MIC and one different for LINE-IN.
This is GREAT, however under Linux my LINE-IN doesn't work, due to lack of informations to how to implement this feature.
I've asked to MSI to help ALSA developers and they answer to ask to Creative.
So I'm here to ask a very little effort to help ALSA developers to implement this feature for my motherboard.
This is the link to do it:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=33
Thanx for any help!

$I take you do know about MS pulling Direct Sound 3D out Vista on up
EAX or Direct Sound 3D version?is in Alchemy how ever you will need a Sound Blaster Audigy on up
http://www.creative.com/soundblaster/alchemy/

MSI K8N SLI Platinum crashed with my videocard

Hi. I don't speak english very vell, so sorry
A bought an MSI K8N SLI Platinum mainboard, 7800 GTX Videocard and I don't know use it with NON SLI mode If the SLI card there in NON-SLI mode, my pc isn't run. Just black screen, and the D-Bracket is show, that the booting is stopped in memory-control (second LED is red.) If I turn my SLI card for SLI mode, accordingly the PCI-E bus is 8x and my PC is run.
My problem is that, that I don't know run my pc in PCI-E x16
I tried 6 BIOS, but always was this is the problem
Ha van itt magyar ember, akkor magyarul a probléma:D:
Szóval van egy ilyen lapom, de nem tom használni 7800 GTX-el. Egyszerűen nem tudom használni non sli módba, a kép mindig fekete és memória-ellenőrzésnél megáll sli módban meg megy a gép, de csak 8x-os üzemmódba. ugyan ez a hiba egy 6600 gt-vel is. Szóval helllllp

Quote from: ChakkaSol on 30-October-05, 08:57:50
First, search the internet for a free translater program and cut n paste. Second, you need to place the graphics card in the pcie slot next to the cpu. Third, you need to make sure the SLI switch card is placed "non-sli" with the arrow pointed towards the graphics card. Finally, you need to make sure your SLI switch card is fully in place so the copper teeth dont show (I made that mistake and my rig didnt boot either). Just my 2 cents.
1st -- ok
2nd - the video card is there next to the cpu in 1st PCI-E bus
3rd -- the SLI switch card is placed non-sli with the arrow pointed towards the graphics card.
fin --- well, i have no idea about this, 'couse after i've removed the card, i could not push it back to its place fully anymore, so the copper teeth show up. I also tried to force it with a screwdriver, but it didn't work. but i can turn on the card holder

Is my speaker system compatible with MSI K8N SLI Diamond?

Hi!
Can I use my old speaker system with MSI K8N SLI Diamond. My speaker system is Creative Inspire 5.1 5500D Digital with decoder. Now 5.1 sound doesn't work properly. When I try look movie with PowerDVD6, center speaker is dead and no speech on movie. On PowerDVD6, SPDIF output is selected and tried also 6.1 channel options but no, speech will not play at center speaker. Some games too 5.1 surround doesn't work. I have connected my speaker system on motherboard coaxial SPDIF to speaker systems Decoder coaxial SPDIF, and speakers on that decoder. Do I have to buy new analog speaker system to get 5.1 surround working? If I connect my speaker system directly on MB analog outputs, sound balance in very bad, rear and front speaker is good but center speaker crackling and speech at center speaker sound like volume level is much too high.

Quote from: Stick on 10-February-06, 19:24:28
if you know that the speakers are working (tested on another pc) it is usually a software configuration error. if the decoder would mess up the sounds, it is unlikely that you would hear anything in the other speakers too.
My speakers systems works perfect my previous setup, when motherboard has nForce2 SoundStorm integrated chip.
Some other forums, peoples claims that this MSI k8n motherboard can't send multichannel 5.1 surround audio on SPDIF and I have to connect my speakers on motherboard analog sound outputs.

MSI K8N SLI and Athon 64 X2 4200+: some problems

Hi from France
I've try to upgrade my computer all day long, and still have no solution about this..
Mainboard: MSI K8N-SLI
Processor: Athlon 64x2 4200+
RAM: CORSAIR 1Go *2 PC 3200
Graphic card: MSI X1950 Pro 256 Mo Radeon
2 HD (WD 250 Go and WD 160 Go) on IDE 133 (supplied by the mainboard)
OK, I've connected everything, everythings seems to be well started, the CPU is recognized as ATHLON 64 X2 4200+, and I try to go into BIOS by pressing "DEL", as it is written on my screen (just beside "F11 to boot sequence)
Nothing happened, it seems that it freezes...
When I start the computer, I hear my HD starting, the graphic card also, everything...
But what's going on ??
I'm a little bit disappointed, it's not the first time I do this kind of upgrade...
I've rebuilt my computer with "old" configuration MSI K7N L Athlon XP 3000+ and MSI 6600 Geforce
Every thing is ok
I don't understand, can somebody helps me
SOrry for my bad technical english...

Quote from: eagle78 on 01-January-07, 07:58:35
First of all
HAPPY NEW YEAR (in France, it's done)
And for my computer, all is allright now
Like a silly boy, I've connected too much things in the beginning (USB Hub I've forgot not to plug)..
And so without that, computer boots well, CPU is seeing good, RAM is OK and all the drives..
Some problems with my OS (XP and SP2), but as somebody says above, I needed to "repair" it, and all is good now
Thanks for your answer...
Best regards...
happy new year nice everything goes well

MSI K8N SLI Platinum sound problem

I've recently installed Windows vista anda i have a problem with my onboard sound, in this case the SB lIve 24! that comes with the msi k8n sli platinum board, i've tried the soundblaster beta drivers but they didn't work, so if anyone knows where i could find a driver to solve this problem, it would be nice
Thanks for your help!!

http://us.creative.com/support/downloads/download2.asp?MainCategory=1&Product=10315&dlcentric=10005&Product_Name=Live%21+24%2Dbit&filetype=1&OSName=Windows+Vista+32-bit
This is the 32bit version of the driver of k8n-sli Platinum mainboard (I have one)... if you want the 64 bit version, just search in the creative support site. Enjoy!

Geforce 7800 GTX won't fit in MSI K8N SLI !

Hey we all know the problem with MSI K8N SLI and 2 Geforces 7800 GTX:
http://www.theinquirer.net/?article=24239
What revision of MSI K8N SLI will fix this problem ? ( i need this info when i will go to store)
and can you tell me is this problem egzist on Microstar K8N SLI Diamond nForce4 SLI mobo ?

Quote from: aduh on 03-July-05, 00:58:22
sorry man i'm lazy sluggard, my women tells me this everyday ...
LOL, well I have this MOBO and due to the "issue" I will be going to a single card it looks like...but to tell the truth, I never saw that much improvement with dual 6800ultras. I am thinking one new 7800 will be more then enough. Only time will tell

MSI k8N SLI Platinum - dead??

Hello,
I have started the PC as per usual. Pushed the power button... nothing. Then again... nothing. Then I swithed off from the switch near the mains entry. and switched on... PC started however I get nothing on the screen. No beeps.
I have an Antec Truecontrol 2.0 power supply, an MSI K8N SLI Platinum (socket 939) with AMD Athlon, 2 GB Corsair TWINX Ram, three HDDS SATA, Raptor 75GB as Primary (C:) and another two WDS. Video Card: BFG 7800GTX+ 256MB OC, PCI - Express.
System has functioned Ok for three and a half years at least. I have replaced the Northbridge Fan from the beginning with a Blue heatsink - I believe Zalman. No temp issues. No overclocking, I am not using any commander modes etc etc.
When I look at the D-Bracket I get Memory Init Error (RED-GReen-Red-Red). I am pretty sure it is not the RAM. I pulled the RAM, used only one stick... same error.
I pulled the video card out. Then interestingly the system reaches the phase just before booting and the D_Bracket shows Floppy Init error (Green-Red-Green-Green). I tried moving the video card to the second PCI -ex - I also reach the Floppy Error point. I put in a crappy PIC-Ex video card - I reach the same Floppy init point - the floppy actually seeks but does not try to read. Unfort I forgot where I put the Monitor adapter thingy so I can;t check if I get anything on the screen with the crappy PCI-Ex video card. Will get it... soon...
I have a hard time determining whether it is the Video card or the mainboard. I have pulled the battery out, left overnight, pushed the BIOS reset... nothing helped. With Video Card in PCI-Ex slot 1, I get the memory init error. With the card in PCI-Ex slot 2 or with no card or with crappy PCI-Ex, I get to the Floppy Init point.
Could it be that at that point I would be getting a VGA error that I cannot see on the screen ? Why then NO BEEPS? Does this Mobo model not beep, just uses the D-Bracket?
It is important - if it is the mobo I am done for, I have to buy Mobo, RAM, CPU... $1,000. If it is the Video card I may find something 1 slot wide and similar to the BFG ...
Can anyone help narrow this please ?
BTW on the screen I get NOTHING, if I pull out the cable the monitor says - check connection, if I plug it in the monitor goes to power saving.
Thank you Heaps

Quote from: Bas on 19-January-09, 00:17:28
Put a stick of memory in there of el-cheapo brand.
Those Corsairs you have need more voltage to start if I'm not mistaken.
Found out what the prob was - the BFG 7800GTX was DEAD. RMA-ed the card. the MSI Mobo is Ok

MSI K8N SLI PLATINUM NOT OVERCLOCK FRIENDLY AS PROMISED

This mobo is good but its false advertisment to call it overclock friendly.
People are having problems getting ther FSB over 220 and this is a overclocking mobo.
MSI K8N SLI PLATINUM (really disappointed over the mobo)
POINT OF VIEW GEFORCE 6800ULTRA @450/1300 (Really good)
Crusial ballistiX PC4000 (Great memory)
Aspire 520watt 35amp (strong as hell)

Quote from: ALFA on 25-April-05, 10:09:30
This mobo is good but its false advertisment to call it overclock friendly.
People are having problems getting ther FSB over 220 and this is a overclocking mobo.
MSI K8N SLI PLATINUM (really disappointed over the mobo)
POINT OF VIEW GEFORCE 6800ULTRA @450/1300 (Really good)
Crusial ballistiX PC4000 (Great memory)
Aspire 520watt 35amp (strong as hell)
Dear Friend don't get angry too quickly. I also have a socket 939 Athlon 3000+ Winchester. In start MSI K8N SLI Platinum was not allowing me to OC more than 220FSB in BIOS. Although in Windows I can OC it to 2.16 GHZ with NVidia NTune. It's 240FSB. You are facing the same problem that I was facing. Its 219MHZ Bug for Winchester CPUs.
All you need to do is when you are OC'ing more than 219 MHZ, just set you HT multiplier to 1x and you can go upto 260MHZ FSB via BIOS. When you get to the desktop of windows use any software to set the multiplier back to 4x or 5x (depends on how much you OC). Nvidia Ntune is a good software for this purpose. Plz keep in mind that Winchester cores are not too much overclocking friendly CPUs. They won't go beyond 2.4 GHZ and instability is bound to happen after 2.3 GHZ.

So, is a -5V pin supply still required for MSI K8N SLI Platinum or not ???

I am looking to buy a new custom made computer. I want the MSI K8N SLI Platinum motherboard for it. The problem is that the non-USA page claims that it requires the -5V pin supply. I have read many threads on this same topic, but havent found a definitve answer.
Is the -5V rail still needed or not ???
I read somewhere that USA models dont require it, as its not mentioned on the USA site. Well my one will most probably be from Taiwan.....
Is there a check, through which I can confirm whether the motherboard my local hardware store is selling, requires a -5V pin supply or not???
lastly, is that a specific model number, from which onwards, the requirement is no longer needed ????
thanx in advance

I agree with SAB only because mine has been rock solid for quite some time. If I could afford it, I would have purchased SAB's PC Power & Cooling 510 model.
The only other model that seems to have the -5v rail are the OCZ psu. However, I have noticed a lot of users with tagan's and have yet to see someone complain about this psu. Im running the 12v rail as a single rail at 30a...you can experiment with the dual rails and it will adjust to the need of your mobo up to 20a on each rail but then the other rail gets only 10a (at least I think thats how it works).
The tagan 480w u22 was built for the future:
1. has a 20/24 pin main power connector - shielded
2. a 4/8 pin cpu power connector - shielded
3. 2 - 6pin vga connectors - shielded
4. 4 - sata hdd connectors
5. Whisper quiet - you just dont hear it
6. 12v rail at 30a - peak load at startup to 35a for 60 seconds
7. 70% to 73% efficiency rating
Is it enough juice? It seems to me that the manufacturers have realized that pretty soon we will have to purchase $500 psu's just to keep up. So IMO, the manufacturers seem to be getting the point. The new 90nm AMD chips take less power than the 130nm chips...and the new 7800gt video cards take up less power than the 6800gt video cards. In the future, AMD will be coming out with a 65nm chip, which will need even less power.
So I think Im right at the sweet spot with the 12v@30a and its also flexible enough to switch to a dual rail system if I need that feature in the future. Tagan does make a 530w and 580w psu too, but they are not as quiet and you only get 2 more amps on the 12v rail as you go up the line. Just my 2 cents.

MSI K8N SLI Platinum & Apacer PC3200 or PC4000 memory (Apacer chips)

I have a situation here. My Athlon Venice 3000 is stable on 2520Mhz. So when i had Patriot PC3200 & Kingston PC3200 dual kit memory i set in bios 280x9 and a 166 memory divider or 315x8 and a 150 memory divider and got ~229Mhz on my RAM. And now Apacer dual kit modules don't want to work on this frequency in this conditions as i discribed earlier (computer isn't boot up and i have a black screen). But PC4000 modules are working on 280Mhz (280x9 and a 200 memory divider). Any suggestions? Is it incompatibility of my mobo and Apacer memory?
PS: Bios 3.9 or 3.A modded by Murdok.

Quote from: kakarocht on 11-June-06, 16:14:30
List down all your rig including PSU and bios revision and put it in your signature so others can help you. Gd luck.
Mobo: MSI K8N SLI Platinum.
CPU: Athlon 64 Venice 3000(1800Mhz) upto 2520Mhz(280x9 or 315x8)
PSU: Delta 400W.
Bios: 3.9 or 3.A
With Apacer memory (PC3200 or PC4000) i have not working memory dividers (150, 166, 183) except 200. Computer is not boot up (black screen).

MSI K8N SLI Mobo (with 24 bit SB Live!) and XP64, no driv

Similar Messages

Maybe you are looking for