MSI kt880 Delta + Graphics card = problems

Hola,I am Spanish pardon for if he doesn't understand each other well something, I have problems he gives video, mainly it is noticed with the windows media player, when reproducing music the visualizations ,si they are interrupted I select complete screen it works perfect,the problems they are also noticed in other moments ,for example when turning off windows that is noticed like a series gives waves he gives the sea, I have experiment with two graphics cards you different and I have the same problems,the drivers and Bios they are the you finish official.
My team is:
MSI KT880 Delta
AMD XP 2400+
2x512MB kingston
Abit siluro geforce 4mx 440 64MB 4x
POV GEFORCE 6 6800GT 256MB 8X
HD SEAGATE 160GB
HD SEAGATE 60GB
greetings and thank you.

Hello, I have formatted twice and with two different hard disks, I have
installed the last drivers give VIA, it finishes it bios and I have proven
other (1.96) that end up he gives to find in a post he gives this forum, I have
proven the memoirs in single and double channel, I have proven with other
memoirs that I have 2x256MB DDR266,y they follow the problems and I have found
a post with a problem the same as mine   
https://forum-en.msi.com/index.php?PHPSESSID=479c7a6b846fca06ad6961315d94d6c3&topic=71718.0
I also mean that playing (3D) I don't have problems , in 2D he doesn't go wel  l
Thanks 

Similar Messages

  • [VIA] MSI KT880 Delta-FSR Bios problem

    Hi!
    I have MSI KT880 Delta-FSR motherboard.My problem is that about every second time when i start my pc BIOS settings will be factory settings.I have to go to bios and change every settings again away.

    I have 120mm fan with my cooler.Temperature of the prosessor is about 44-47 celcius.Cooler is over one year old.
    I have 2*512M PC 3200 memory.They are not same brand/make.In start i have one memory stick, 512M/Kingston and the problem was same.
    All the answers are good what you are writing but i dont understand how those have an effect my BIOS problem ??Sometimes when i start my pc memory clock fz is 266 and its should be 400.I have to go bios the change it and like i write earlier put the onboard lan and ac97 enable.
    I close pc this morning when i goto school.When i come afternoon home and turn my pc on i have this message:
    "Scan devises,please wait...."
    Hardware initiate failed,please check device.The bios does not be installed!Press(g) to continue.
    Reboot and select proper boot device.When i do that there is only my cd-rom device.I cant choose HDD drive at all.
    I shut down the pc and take another computer ( i have 5) bios battery and the pc start at once.Now i have tho follow can the problem be a consequence of that.

  • VIA MSI KT880 Delta series - sound problem

    In winxp all is fine. But when i'm starting a game like CS 1.6 something happens. I can hear some noise (silent cracks) and the game sounds have a cybernetic aftersound. After a few minutes sound totaly downs and only system restarts helps :/

    I see you don't have too much hard ware that could go wrong. It used to be important to have a sound cable attached between the CD and the sound card. This shouldn't be necessary, remove it if you got it. I don't know your games, so I don't know if you use a CD, or if you play on the Internet.
    Apart from this, sound problems mostly have to do with Windows.
    Off: Aha, Osnavi, you thought I'd say SoundBlaster! Other problems, maybe, but I can't complain about the sound quality.

  • MOVED: MSI KT880 Delta-FSR - problem with multiplier

    This topic has been moved to Overclockers & Modding Corner.
    MSI KT880 Delta-FSR - problem with multiplier

    http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
    wiretrick it so multipliers under 12.5 will work
    assuming the cpu is an old unlocked one

  • [MSI P35 Platinum] Graphics Card Slot

    Hello,
    I just bought the MSI 560 GTX graphics card. My motherboard is MSI P35 Platinum so i was wondering if i can place the graphics card in the 2nd PCI-E slot or this could occure problems. This is my motherboard:
    so my question is: can i put the graphics card in the YELLOW slot? Cause it won't fit in the upper PCI... Thanks  

    Quote from: Jack on 03-September-11, 19:12:09
    Why doesn't it fit?  It should fit without problems.
    Because of the I/O controller (i think this is it...)
    Quote from: Jack on 03-September-11, 19:12:09
    You can do that, however, in that slot, the video card will only get x4 lanes assigned to it (instead of x16 lanes in the primary PCI-Express slot).
    And what difference does this make?

  • Replacement for msi geforce 9500gs graphics card

    Need, REPLACEMENT FOR MSI GeForce 9500GS Graphics Card. On HP m9510f Desktop. I didn't replace while under warranty.

    JudyInTexas wrote "No way that will fit. There is a PCI Express card next to the video card and no empty slots on the Elite 9340f"
    Since this is not the topic of the thread,  it should be in a new thread.  Care to provide more info and just what is expected?
    That model "9340f" does come with the geforce 9500gs graphics card, according to this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01465973&cc=us&dlc=en&lang=en&lc=en&product=374...
    Care to provide what your statement is pertaining to?
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • MSI KT880 Delta broken!?

    Hi all,
    when I tried to setup a new pc with the MSI KT880 Delta with a mobile Athlon XP and an Arctic Copper Silent TC2 Cooler, I destroyed some of the circuits close-by to the plastic heat sink grip. Using the Arctic Copper Silent TC2 Cooler, there was no way, not to harm these, because they are awfully close to the cpu! They look like little bridges and are labeledd. "C014" and "L11" and "L31". You might think what a noob, but I have build up all my systems from scratch as well as pc's for friends and family so I'm not totally "stupid", at least I thought I was not. In the meantime I got myself an AMD 64-3000 on a K8N Neo2 Platinum, which works like a charm. The question is, can the board/circuits on the KT880 Delta be repared, is it worth it or are they just junk?
    After breaking the HW, I did not put it in my PC to try because I was afraid to kill another card or disc. What can I do? Any insights.
    Thanks in advance
    Lars

    you could ask the local msi office about a repair
    but in this day and age and the price of boards now being so low i dout its economical

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

  • Is anyone still having discrete graphics card problems after replacement

    Is anyone still having discrete graphics card problems after replacement?
    Macbook Pro eligible for replacement through Apple program.
    Submitted my computer 2 days before program came into effect.
    They replaced card or logic board with same original model: AMD Radeon HD 6770M 1024 MB
    Issued me a refund check for my repair.
    Seems to have some noticeable issues, fan running more than usual again, and temporary graphic lines,
    but disappear too fast before a screen dump...
    Is anyone who has participated in the replacement program received a different graphic card for
    Model Macbook Pro 17" (late 2011)
    Thank you for the reply.

    Unfortunately I have yet to call AppleCare because I am on a project for 3 weeks and cannot be without my laptop during that period....
    Until that time I am trying to figure out what I can do to protect the Palm Rest/Mouse Pad area of my Macbook once they either fix it or give me a new one. Has anyone had any experience with either of these products that can provide some input as to whether they are good or bad?
    http://www.marware.com/cgi-bin/WebObjects/Marware.woa/6/wa/selectedCategory?cata logCatID=224&wosid=djXnz6k0JQiXbGEX7Stos0
    http://www.powersupportusa.com/products/macbook-wrtp.php?category=mb

  • HP Pavilion G4 1003-TX Graphic Card Problem

    Hello... I have HP pavilion G4 1003TX laptop which cureently having graphic card problem. Technician at my place said that's caused by the solder connection on my Radeon graphic card.  He said it can be repaired, but the same problem will happen again soon unless i replaced my graphic card with new one.
    In my laptop, i have Radeon and Intel graphic card which i can switch freely. My question is, if i change from my Radeon to my Intel graphic card, is my graphic card problem solved? Is my laptop still will not last long unless i buy new graphic card?
    Please help me if you know the answer. Thanks
    This question was solved.
    View Solution.

    So my laptop will not start after i turned it on. The technician said it because some solder connection on the graphic card so it need to be resoldered. He warn me that the same problem will happen again soon since it's sign that my VGA card will dead. After he resoldered, my laptop can work normally for 3 months. Now, after 3 months, my laptop  can't start again just like before. The technician said it because of solder connection of my VGA card again.
    So, since my laptop has Intel and Radeon VGA card that i can switch, is switching my VGA card form Radeon to Intel will solve my Radeon VGA card dead problem? Will my laptop can work normally if i switch my VGA card to Intel?

  • Mail (4.6) in OS10.6.8 shows several photo attachments with discoloration, distortion (jagged lines, splotches of color, etc.). Could it be a graphics card problem?

    My mother-in-law's MacBook Pro 13 (m2009) Mail (4.6) with OS 10.6.8 shows several
    photo attachments with discoloration, distortion (jagged lines, splotches of color, etc.).
    Could it be a graphics card problem?
    Or a bad unpacking of attachments over poor WiFi/Internet?
    If anyone has an idea, I'd appreciate your help.
    Thanks from Japan!
    Dan

    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • HT1553 my laptop screen has gone blank, probably graphic card problem. i want to back it up. please help

    my laptop screen has gone blank probably due to graphic card problem.i need to back up my content as i have bought a new mac and do not intend on repairing the old one. please help

    Try a Target disk:
    http://support.apple.com/kb/HT4889
    http://support.apple.com/kb/HT1661
    http://support.apple.com/kb/HT4413
    If you are buying a new mac, Apple will do the migration for you, I would let them do it.
    If you have an external monitor, I would try to do a data backup before doing anything.
    Could also be your drive has already failed, or logic card.  Again I would take it the  Apple store, and have them deal with it since you bought a new Mac, they would do this for free, and the shoulder the responsibility.
    Hoe this helps.

  • MSI X48C Platinum - Graphic card identification problem

    Hi,
    I have been having this problem for a long time which I still haven't been able to solve.
    When I plug my graphics card to the PCI-E slot 1 (Slot closest to the cpu) I get nothing on my monitor. I have to plug it on to the  PCI-E slot 2 (PCI-E 4) to get anything on the monitor. I am running Windows 7 (64bit) Professional.
    With this configuration (That is, the graphics card being installed in slot PCI-E4) I am getting a lot of blue screen failures due to  graphics card being non-responsive, especially when running graphic intensive programmes.
    Here are the details of my PC configuration.
    Motherboard - MSI X48C Platinum (MSI MS 7353)
    RAM  - 6GB DDR3
    Processor - Intel Core 2 Quad Q9300  -  2500Mz
    BOIS - Version 7.4V
    Graphics card - Hightech Radeon HD4870  1GB DDR5
    Any help would be appreciated.
    Thanks.
    Cris

    Hi go_for,
    Thanks for the reply.
    I am using a Aerocool 750W  (model VP-750)power suppy and the graphics card is connected with 2 PCI-E power connectors from the power supply.
    The problem is that it runs on the other pci-e slot not the first one. Could the first slot be defective?
    Thanks
    Cris

  • Problems running PC game with bootcamp, graphics card problem?

    I have searched extensively on answers to this question and I've gotten some vague ideas of what to do, but not a direct answer.
    I recently installed a copy of Windows on my 15in Macbook Pro (the ones that came out right before the latest ones in late August/Early October 2008 or whatever). I did this in order to play Final Fantasy XI Online on my laptop. The machine is more than capable of running the game and I've read forum posts that had said that it works fine through bootcamp. I installed the game and was playing it just fine until one day the game began to lag really bad in areas where there were a lot of people or in other words something very demanding of the memory/graphics. I don't mean internet speed lag, I mean the computer would slow the game down to a crawl and the sound would be sort of garbled like it was some sort of feedback. It would happen periodically or if some sort of animation would start (spellcasting, etc)
    I've tried everything from changing the settings of the game so that it's not as demanding to installing modified drivers for the graphics card (256mb Nvidia GeForce 8600M GT). I read that there may be some problems with the graphics and sound cards communicating which causes lag?
    The computer also gets unnaturally hot while I run the game/windows in general. Could it be a cooling problem?
    Please help!

    Processor:     
    Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
    Memory:    
    4gig,Corsair TwinX XMS2 DDR2 800Mhz
    Hard Drive:    
    Seagate 1 TB
    Video Card:    
    ATI Radeon HD 3850 X2
    Monitor:    
    EIZO monitor
    Sound Card:    
    Realtek 7.1 HD Sound
    Speakers/Headphones:    
    Mikomi 5.1 HD @ Headphones
    Keyboard:    
    Logitech Gaming Keyboard
    Mouse:    
    Logitech MX510 Gaming Mouse
    Mouse Surface:    
    Belkin Mouse Mat
    Operating System:    
    Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
    Motherboard:    
    MSI P35 Neo 2
    Computer Case:    
    CiT 1004 CSCIT1004 Black Screwless Gaming Case
    PSU:600 Watt GreatPower
    this is my gaming rig

  • Help with ( mobo + graphics card ) problem

    i have a MSI P35 Neo2-FR: Platinum and my gpu is a ATI Radeon HD 3850 x2 that runs in crossfire.
    i noticed the other day when i tryed a game for the 1st time in a while.. I only built this pc last xmas.. The problem i noticed is the preformance of the graphics card didn't seem up to scratch with the preformance i have looked around many sites but can't find a solution to the problem when i looked at the review of the MSI P35 Neo2-FR: Platinum motherboard that someone had wrote up i can't remember were i sow it but they said that the Duel cards they have only ran at 4x when i would have thought would run at x16
    any solution how i can fix this problem?

    Processor:     
    Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
    Memory:    
    4gig,Corsair TwinX XMS2 DDR2 800Mhz
    Hard Drive:    
    Seagate 1 TB
    Video Card:    
    ATI Radeon HD 3850 X2
    Monitor:    
    EIZO monitor
    Sound Card:    
    Realtek 7.1 HD Sound
    Speakers/Headphones:    
    Mikomi 5.1 HD @ Headphones
    Keyboard:    
    Logitech Gaming Keyboard
    Mouse:    
    Logitech MX510 Gaming Mouse
    Mouse Surface:    
    Belkin Mouse Mat
    Operating System:    
    Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
    Motherboard:    
    MSI P35 Neo 2
    Computer Case:    
    CiT 1004 CSCIT1004 Black Screwless Gaming Case
    PSU:600 Watt GreatPower
    this is my gaming rig

Maybe you are looking for

  • My iWeb site can no longer be found by browsers

    I have had an iWeb site which has been live for about a month. It has been working perfectly. I have updated several times without any issue. It still appears to be working well within iWeb. I can make changes and publish changes. I have my own domai

  • Accounts Payable and PO Accrual Reconciliation Summary Report?

    Dear all, We are using R12.1.3 and doing the reconciliation AP Vs PO Accrual. However, I run the report "Accounts Payable and PO Accrual Reconciliation Summary Report" and found that one record is strange, like the PO Accrual balance is something -10

  • How can I use my Mac OS X for the next time

    Dear sir, Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer. By the way... I already installed the Mac OS X to my MacBook Pro so please I'

  • Can't understand why my DefaultListCellRenderer doesn't work

    Hello i know that from the subject title it seems that this is the wrong category to post but because i need to load thumbnails in list and i resize them i didn't know where to post sorry if it is the wrong plase and also sorry for my bad english. I

  • Create Employee as Supplier?

    Hi! The user has a requirement where the employee can be also a supplier (version 11i) . I have created a new employee in HRMS module, and I have enable option "Automatically Create Employee as Supplier" in Payables. But when I run report "Employee U