MSI Object to run silent Zen works 3
I have an MSI object I have created -
It installs just fine
But I want it to be silent to the end users -
I have this command msiexec /i <msi file name> /qn
The MSI package is already put together -
How can I use the object I have to run this command msiexec /i <msi file
name> /qn with the MSI object I have?
What i want to knwo is where in the Object can i add this command so that
the package will run silent
Thanks in advance
thanks
"craig wilson" <[email protected]> wrote in message
news:3ok_e.2174$[email protected]..
> It's under one of the tabs in C1. I believe it is the first tab. Not in
> the office, but I will check tomorrow and let you know in case you can't
> find it.
> I never pay attention, I just sorta know by memory. Like a combination
lock
> you turn but don't remember the actual numbers :>
>
> --
> Craig Wilson
> Novell Product Support Forum Sysop
> Master CNE, MCSE 2003, CCNA
>
> Editor - http://www.ithowto.com
>
> (Seeking Full-Time Expert? Drop me a note :> )
> "Nagata" <[email protected]> wrote in message
> news:aTc_e.1605$[email protected]..
> > where in the object can i add this switch ?
> > thanks in advance
> >
> >
> >
> >
> > "craig wilson" <[email protected]> wrote in message
> > news:Nv9_e.1409$[email protected]..
> >> Why not just create an app object and specify "MSI" as the type. MSI
> >> apps
> >> have a "Silent" Option.
> >>
> >> --
> >> Craig Wilson
> >> Novell Product Support Forum Sysop
> >> Master CNE, MCSE 2003, CCNA
> >>
> >> Editor - http://www.ithowto.com
> >>
> >> (Seeking Full-Time Expert? Drop me a note :> )
> >> "Nagata" <[email protected]> wrote in message
> >> news:wszYe.5455$[email protected]..
> >> >I have an MSI object I have created -
> >> >
> >> > It installs just fine
> >> >
> >> > But I want it to be silent to the end users -
> >> >
> >> > I have this command msiexec /i <msi file name> /qn
> >> >
> >> > The MSI package is already put together -
> >> >
> >> > How can I use the object I have to run this command msiexec /i <msi
> >> > file
> >> > name> /qn with the MSI object I have?
> >> >
> >> > What i want to knwo is where in the Object can i add this command so
> > that
> >> > the package will run silent
> >> >
> >> > Thanks in advance
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >>
> >
> >
>
>
Similar Messages
-
How to make the Creative Cloud Uninstaller run silently ?
Hi all,
We created a deployment using Adobe Application Manager (AAMEE) in order to deploy Adobe Creative Cloud silently. That works fine. Now, when we uninstall the software, by running msiexec /x {productcode_of_the_msi_that_was_generated_using_AAMEE}, there's a log entry in the Event Viewer saying Removal success or error status: 0, which is good. However, there's one remaining entry in the "Programs and Features"-list in Windows 7 control panel: "Adobe Creative Cloud"
So I took a look in the registry and I found the uninstall string for that program: "C:\Program Files (x86)\Adobe\Adobe Creative Cloud\Utils\Creative Cloud Uninstaller.exe". Problem: this uninstaller won't run silently! Or at least I didn't find any switches / command line parameters to make it run silently. Does anyone know how to make it run silently?
Question for Adobe in case there are no silent options for this uninstaller : can you explain me why you create tools (AAMEE) to generate silent installers but still leave traces on the computer that can't be uninstalled silently???
As an application packager I would also like to address this general message to all the big software making companies out there (SAP, Oracle, Microsoft, Adobe etc.) : other big companies that buy your software, mostly want to install and uninstall it without user intervention. So please package it so that we don't need to spend extra time and money deciphering your fancy, exotic installers / uninstallers. MSI is quite a good standard you know...
Thanks all of you!Hi,
If I understood correctly, you have created an installation package including creative cloud desktop app through creative cloud packager not AAMEE.
Adobe creative cloud doesn’t get uninstalled even if all the products and updates are removed from machine. But this will not cause any issues (or extra space) on installation of new package.
Its recommended that if the package is modified (adding more products or updates to existing package) and installed then it should be uninstalled via msi of modified package.
Thanks,
Ashish -
Running a Zen Micro on Windows 9
I am thinking of getting a Zen Micro and i am running Windows 98SE, although Windows 98SE is listed in the minimum system requirements it says this below:
"NOTE The software applications on the Zen Micro CD may have higher requirements for basic functionality. Refer to each application's documentation for details."
Does anybody know if there are higher requirements and what they are?
Is anyone running their Zen Micro on Windows 98SE?I'm using 98SE and my Zen Micro works fine - no problems since I bought it in mid December (touch wood!!). I'm also using the supplied software without any problems.
-
MOVED: msi 990fxa-gd80 running 2133mhz
This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=152798.0Quote
i don,t know if anyone is interested but i have a msi 990fxa-gd80 running 2133mhz ram @1600mhz with no oc at all cpu is a 1100t bios 11.4
Some will be interested. But it needs to be made crystal clear that 1600 RAM speed is 'OVERCLOCKING' plain & simple with your particular CPU specifications for the integrated memory controller. Running 1600, that's great! Here's another 'but', the RAM you have is 'rated' 2133, but I guarantee the chips on them are far from 2133. Most likely overvolted 1333's, or 'maybe' 1600's. Have a look at CPUID's CPU-Z SPD Tab & look at the Max. Bandwidth line.
We are all happy that it is working at 1600 for you. The RAM you have may work well for others too. I guess that was the original purpose of this thread? Seems it's done it's job then.
Quote
please look at earlier posts Henry says different again to what you and bas are saying i think there need to be some sort of general consenses on this would you say
Making issue out of admins & mods having a difference in their take on CPU IMC native RAM speed support is not cool. I am sure Henry had the brand new native supported 1600 RAM bulldozer CPU's in mind in his reply, & didn't intentionally try to misinform anyone. -
Help!!! create & destroy CORBA object at run time
I am develop an program using CORBA (Java IDL and JDK 1.3 on Win 98 OS) that involved login-logout mechanism. Someone can login into my program, by access HTML file from the server machine that contained an applet, via browser (NN 6).
(the client and server run on same machine)
If somebody login, says Mr.X, and make mistakes by type an invalid password, my program still (can) work by opening a wrong account/record belong to other people who (login and) logout last time before Mr.X login. It is a wrong result.
I know the reason why this could be happen, its all because Java IDL support the CORBA transient object type. This transient object has the same lifetime as the execution of the server process that creates it. And it cause a problem for me.
According to the explanation above, i have some questions :
1. How to create, access, and destroy (delete) any CORBA object on demand (at run time) without have to shut down the server (process), in order to release any data/record hold by the CORBA object ?
2. If Java IDL cannot create and destroy a CORBA object on demand (at run time), how do I solve my problem above ?
If Java IDL cannot delete any CORBA object at run time, can it just delete any value (refresh data) that the object hold so any new data can be add again ?
3. if i run my program on 2 different machine, it result an error : COMM_FAILURE minor code 1398079490. How do I fix it ? any solution for this error ?
i really need any help, this program is my final project
i will appreciate any help and answers
thanks in advance
Marsel HoberI'm using the POA implementation in java 1.4, but the api docs
aren't very helpful in terms of what all the various policy
values really do. I've got a servant that gets created by a
request on a different object, and needs to stay around until
the client tells it to go away. All the material that I've found
on how to use CORBA in Java is either pre-POA, or doesn't
cover any kind of management policies like servant retention.
Can someone tell me how to do this, or am I stuck trying to
wade through the CORBA 2.3 spec and hoping that I can
figure out how the stuff really works in Java? -
Msi 990fxa-gd80 running 2133mhz
hi
i don,t know if anyone is interested but i have a msi 990fxa-gd80 running 2133mhz ram @1600mhz with no oc at all cpu is a 1100t bios 11.4
spec 1100t
msi 990fxa-gd80
ram:patriot viper extreme div2 2133mhz
hd:ocz ssd,s raid0
creative:x-fi fatality pro
gainward gtx 570 sli
coolmaster:1200 gold
custom watercooling:ek hf supreme nickel
ek:360 coolstream rad
laining:d5 pump xscp duel bay res
hope this will help others with memoryQuote
i don,t know if anyone is interested but i have a msi 990fxa-gd80 running 2133mhz ram @1600mhz with no oc at all cpu is a 1100t bios 11.4
Some will be interested. But it needs to be made crystal clear that 1600 RAM speed is 'OVERCLOCKING' plain & simple with your particular CPU specifications for the integrated memory controller. Running 1600, that's great! Here's another 'but', the RAM you have is 'rated' 2133, but I guarantee the chips on them are far from 2133. Most likely overvolted 1333's, or 'maybe' 1600's. Have a look at CPUID's CPU-Z SPD Tab & look at the Max. Bandwidth line.
We are all happy that it is working at 1600 for you. The RAM you have may work well for others too. I guess that was the original purpose of this thread? Seems it's done it's job then.
Quote
please look at earlier posts Henry says different again to what you and bas are saying i think there need to be some sort of general consenses on this would you say
Making issue out of admins & mods having a difference in their take on CPU IMC native RAM speed support is not cool. I am sure Henry had the brand new native supported 1600 RAM bulldozer CPU's in mind in his reply, & didn't intentionally try to misinform anyone. -
CS5 is opening raw files as a smart object to files im currently working
I just bough new CS 5 and find this big error. When i open raw file in Camera Raw and i have opened some jpg in CS5, it always opened as a smart object to this small jpg i have opened before. The same is doing my CS 5 when i drag some file from desktop, it always ended as a smart object in file im currently working with. Normaly it has to open as a new file not as a smart object in this file im already working with.
How are you opening your RAW files? If you are dragging and dropping them onto Photoshop, on top of an already opened file's workspace - all files will be placed as smart objects. If you drag the files to anywhere else in the interface, for instance the grey area on top of the workspace, they should open as usual. If you are opening them via Bridge or by double-clicking them in Explore, they should open as normal.
-
How to build sql query for view object at run time
Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth AddankiAs I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_ -
MY iPhone 4 was run over at work by a forklift the screen was badly cracked but other than that worked fine for 6 days. Then it got really hot while charging and shut down and will not power back up. I have photos on this phone that we're not backed up to I cloud is there any way to retrieve my photos from this phone?
No. You probably should have backed it up while it was working during those 6 days...
-
I am just about giving up! I have upgraded Pages to 0.9 (4.3). Now when I copy text from an incoming email and paste it into Pages it pastes in as an Object and I can't work on it. It has a border round it and corner markers. I have never had this problem before. I have looked at every conceivable thing but cannot find how to get rid of this Object and just paste in the wanted text. If I fiddle and fiddle within this text I can eventually get a cursor and work on the text - but how on earth can I get rid of the surrounding box?
I don't know if this is at all clear but I can't think of any other way to describe this - but it looks like this in Pages with corner and top, bottom and side markers.
Monthly summary for .................March, 2013
Four more elephant Rescues during the month - first a yearling female named “.......................................
LeciaPeter hello - I have been copying and pasting for as long as I can remember and it has NEVER done this before - so why now!? Anyway, Jerry has told me about Paste and Match Style --- yet another new thing!
I have also discovered that I don''t need to hold down Option when I go to Save to get Save As - I can hold down 4 keys (shift, option, command and S) and it will bring up Save As!!
Thanks for your response.
Lecia -
Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.
How do I reach tech support?http://forums.adobe.com/message/5506764#5506764
-
How to get class name of a object in run time, from its accessible context.
Hi,
I need to get the class name of a java object in run-time, given the AccessibleContext of that object.
I gone through the AccessibleContext api documentation. but there is not way to get the class name for a java object using its AccessibleContext object.
Do any one have any idea how to get the class name of an java object, given its accessible object Accessible.
Thanks
Timberlake816311 wrote:
Please try to provide a solution for my requirement and avoid evaluating a requirement.
I am a curious guyit's great to be curious. however, in this situation, the requirement makes no sense in the given context. so, in an effort to be helpful, the people on this forum are asking you the reason behind the requirement. the reason we do this is because we have experience answering questions on this forum and, more often than not, requirements which don't make sense are the result of misunderstandings or confusion on the part of the person making the requirement. if we can figure out why you want to do what you want to do, we may be able to point you in a direction which makes more sense. -
Msi object will not install with non-admin user
I've created an MSI object for the Flash 9 plugin, which installs okay
on the workstation when I login with an admin user. It will not
install when logged in with a normal user account. I have set it up as
an unsecure user and given the workstation R and F rights to the msi
object, but I'm still getting a 1603 error code.
Any suggestions?http://appdeploy.com/packages/detail.asp?id=798
You will see the ZENworks reference on this page.
I would bookmark this site :>
I almost always check it before deploying a new package to see if it is
listed. Helps me find issues before the issues find me :>
[email protected] wrote:
> I've created an MSI object for the Flash 9 plugin, which installs okay
> on the workstation when I login with an admin user. It will not
> install when logged in with a normal user account. I have set it up as
>
> an unsecure user and given the workstation R and F rights to the msi
> object, but I'm still getting a 1603 error code.
>
> Any suggestions?
>
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN -
ZSAPLINK for Object type = CLAS is not working
Dear Experts,
ZSAPLINK for Object type = CLAS is not working. On executing by selecting Export Object to Slinkee with Object type = CLAS and class name, It is giving the dump which is shown in below snapshots. Pls guide me how to resolve this error.
Thanks
KHFrom the screenshot, It seems that the object _renderer did not point to any memory location.
You can verify this by putting a breakpoint in method IF_IXML~CREATE_RENDERER of class CL_IXML
If the return value RVAL is initial, this mean there something wrong with the kernel module abkm_iXML_CreateRenderer. If it is, you will have to check with your Basis team to apply some kernel patches.
Hope it helps. Cheers! -
I can't get the auto run feature to work for placing content
on a CD. Any Thoughts PLEASE? Thank you!Yes, I have a thought. Don't double-post issues to the
fourms. We'll see your (single) post and offer help if we have any
to offer, but double posting is like SHOUTING or cursing - it is
rude and wastes our time. It is also a violation of forum rules.
You're welcome - see your duplicate post for a suggestion
about your problem.
.
Maybe you are looking for
-
Hi All, I want to know how to upload a word doc using MIME objects.
-
Importing HD for non-HD timeline... downconverting?
Question: I have to shoot an event where the lead camera will be shooting HD. The secondary camera will be SD. I will then be editing the two tapes together on a SD timeline. I use Final Cut Studio (1 not 2). What would be the best approach? Should I
-
I just purchased camera connecton kit and it will not download video
I just purchased the Camera Connection Kit and it will not download video. Warning comes up stating " the attached device uses too much power"
-
Tablespaces reach 100 percent even though limit is higher and Autoextend ON
I am working as an APPS DBA and am running the E-Business Suite in a production environment. The problem is that sometimes when I check the tablespace growth some of the tablespaces reach 100%, and available space showing zero (e.g APPS_TS_MEDIA) eve
-
Log of changes in PPOMA_BBP ?
Hello all I'm just wondering if there's a change log of changes done by a user in PPOMA_BBP... or at least a table we could have a look at it using SE16. TIA and best regards, Renaud