MSI P67-GD65 (B3) Problems With New Ethernet Drivers

MSI P67A-GD65 (B3) BIOS 1.13 Beta 1, i5 2500K, Windows 7 Sp1 64 bit
G.Skill Ripjaws 2x2GB DDR3 1600 9-9-9-24
Coolermaster 750w GX
Sapphire AMD Radeon HD 6800 Series  (1024 MB)
SAMSUNG HD103SJ SCSI Disk Device  (1000 GB, 7200 RPM, SATA-II)
ATAPI iHAS124   B ATA Device
Antec 300 Case/Logitech Gaming Keyboard and Mouse/Logitech 2.1 THX Speakers
Windows 7 Sp1 x64
The latest Realtek Network drivers that install and work when surfing is 7.041.
I have installed 7.042, 7.043 (from station drivers and windows update), and 7.044
They will install but when i surf, it goes nowhere.  7.038 and 7.041 work like a charm.
 Am i doing something wrong, i uninstall and install. :(

Quote
the 7.043 is for a windows update, which doesn't work correctly.  It wouldn't be on windows update unless you werent meant to upgrade it.
That's not entirely true. Windows has made mistakes in the past of supplying incorrect updates to components & devices. Safest way to get correct drivers is from the MSI Website for your board. MSI tests them when they are received from the vendors & then posts them on the Website.

Similar Messages

  • Has anyone else had problems with nForce ethernet drivers 3.13 and abo

    Hi, I installed the previous version of the nForce unified drivers (2.03) and I have had problems with the latest version of the unified drivers also (2.41). These both have ethernet drivers "3.13 (WHQL) + TOT .NVU"
    They seem to be the ethernet drivers fault. If I install one of the latest versions of the unified drivers, windows does not boot up, it just hangs at windows logo. ?(
    If I remove the ethernet cards drivers using safe Mode, the system will boot up fine. I also have to re-install older versions of the ethernet drivers to get the system to boot.
    I am using the K7N2 motherboard with onboard ethernet.
    Any reasons/fixes would be great , cheers  :]

    falty mouse got a new one worked fin

  • Solved flicker problem with newer fglrx drivers

    This has been annoying me since the move from 8.29 to 8.30: I have an integrated Xpress 200 on my laptop, and newer proprietary drivers caused the screen to flicker. This has caused me to stick with the older drivers, which restricted upgrades to X.org and the kernel. I was misled by some posts on the Internet to believe that this was the result of using custom modelines.
    I have finally solved the problem yesterday. I am posting my findings in case anyone else has been suffering from the same behaviour.
    The newer drivers come with an ACPI script, installed under /etc/acpi. The script is invoked every minute and inspects the current power status (i.e., A/C or battery). It then invokes
    aticonfig --set-powermode=[MODE]
    to adjust the driver to the new settings. Each time this command is executed, it causes the screen to flicker.
    Obviously, there is no need to run the script if the power mode has not changed since the last call. I have therefore modified the script to first check the current driver power mode, and execute the mode command only if a new setting is required.
    I hope this helps someone.

    I need my hand held a bit here...
    this seems to be the problem I'm having, ie the ac/battery event being called too frequently, but have no idea how to edit the script. I'm on an asus w3n, will it help to replace apci with asus-laptop and apcid daemon...or just add those and leave acpi daemon?
    apologies for my numbnut newbie-ness.

  • Any one with problems with new ide drivers

    having read hundreds of threads on 3 forums most problems seem related to older cdroms
    so if it will not boot ,shut down what ever disable all bar c drive
    then test and add them back one by one

    My system wont recognize DVD's now after trying the 3.13's. I tried mWarheads nForce reset and Driver cleaner route first = no go. I reformatted and reloaded OS with both Microsofts IDE drivers, no go, then mWarheads 2.45 remix still no go. I'm ready to snap this mobo in half. I will try a different drive first. Its rediculous that nVidia can't release good drivers as long as these boards have been out.......
      I'm about ready to try Intel.......  never, EVER thought I'd say that......

  • Sandybridge MSI P67-GD65 with Cayman MSI R6970 Short Test :)

    Just for share and I think this post is already late because there are lots of reviews in the net for the new ATI 6970 video card. At least we can say that this would be a real benchmark score and I personally did the run.  Also, I’m using Intel’s new Sandybridge for the tests and I will enumerate the configuration later on.
    The video card I have here is a MSI ATI R6970-2PM2D2GD5. Specs are 2GB of GDDR5 Mems running at 5500mhz / 880mhz Default Core Clock / 256Bit and with 1536 Unified Shaders.
    Plain and simple design box but its huge
    Accessories
    More photos of the card
    You have 1 Dual-Link DVI Port / 1 Single-Link DVI / 2x Mini Display Port and lastly an HDMI connection With one card alone you can actually have 4 displays for Eyefinity
    Pencil case look for the Top Side hehehehe 1x 8pin and 1x 6pin Power Inputs
    Next for my Test Configuration System:
    Quote
    • Processor: Sandybridge i5 2500 3.3ghz
    •Motherboard: MSI P67-GD65
    •Mems: Plain 2x 2GB DDR3 1333mhz
    •PSU: AcBel R8 1100watts
    •HDD: WD Caviar Green 500GB SATA
    •Softwares: Windows 7 32bit / ATI Catalyst 10.11 Driver / 3dmark06 and Vantage with latest patch
    Stock Benchies
    3dMark06 24k
    Vantage 19k
    Next Oc’ed i5 2500 to 3.9ghz just to check if there are still bottlenecks for the new Sandybridge You decide hahahaha
    3dMark06 26k
    Vantage 20k
    Lastly, Both VC and Proc oc’ed
    3dMark06 27k
    Vantage 21k
    That’s it . Thanks!!!!

    @zsde
    this is an AVC Global Star Cooler. Actually all 3rd party market 1156 coolers are still compatible with the new sandybridge sockets  So if you have one, your safe already

  • MSI P67-GD65 (B3) Did I make a bad choice? I'm building a new system!

    After reading all the problems everyone seems to be having with boot problems and freezing, did I make a bad choice? Here's what I'm putting together when the parts arrive.
    It's been a few years since I built my own rig, but every pc I've ever owned I built myself except my Dell XPS 630i  (got a screaming deal).
    MSI P67-GD65 (B3)
    Intel i7-2600K unlocked and unleashed
    CORSAIR high performance Vengeance memory module 8GB (2x4GB) 1600MHz 9-9-9-24, 1.5V
    Sapphire AMD Radeon HD 6970 2GB GDDR5 PCI-E 1080P
    Western Digital Caviar Black 1T Hard Drive
    Dell XPS 630i Case and Delll 750W power supply (I know I shouldn't reuse this case)
    Windows 7 Ultimate 64bit

     "Dell XPS 630i Case~I know I shouldn't reuse this case"
     Poor case for cooling with quad CPU and higher power consuming VGA card as you sure will end up with high temperature problems. It would be wise to get a better case.

  • MSI P67-GD65 running 4 DIMMS slots

    Hello,
    I have two kits of memory:
    2x2Gb 1600 cl7 1.65v (that runs at 1.5v with same latencies 7-8-7-24)
    2x4Gb 1600 cl9 1.5v  (9-9-9-24)
    Both kits are Gskill Ripjaws, I have already tried lots of things without any success so far, (relax timings to high values, increase voltage, tried link/unlink, swapped kits from black to blue), I cannot boot with RAM set to 9-9-9-24 (whether 1 or 2T) and 1600Mhz, the only way is to disable XMP and let memory speed to auto.
    And so memory is recognized and runs in Windows at around 1310Mhz~1315Mhz with timings 7-7-7-20 (values chosen by me since I cannot use higher speeds).
    In case I set memory speed to manual, whether its 1333Mhz or other values I get three long bips and I am unable to boot.
    CPU Core i7 2600K
    MSI P67-GD65 (B3) using latest official bios (1.E)
    Actual position of the memory:
    DIMM0:4Gb
    DIMM1:2Gb
    DIMM2:4Gb
    DIMM3:2Gb
    Thanks for your kind help.

    Quote from: Jack on 14-November-11, 22:45:26
    Thanks for your help Jack, this explains my issue.
    I am still used to SDRAM, I mixed different sizes, brands, single and dual sided, even speeds, it always run without problems.
    I need to get used.
    Quote from: Henry on 15-November-11, 14:47:34
    And the fact that they are the troublesome Ripjaws to begin with. Mixing one type of troublesome Ripjaws with another type of troublesome Ripjaws and you end up with double trouble.
    I see, despite of the fact Ripjaws are mentioned as compatible, I should avoid them as they mean trouble.
    RIP Ripjaws 
    What brand would you recommend?

  • MSI P67 GD65 Boot Beep change after bios flash 1H & 1I

    Good evening.
    First of all my pc specs:
    - Msi P67 GD65 B3 Revision
    - i5 2500K
    - 2 * 4 gb DDR 3 G.Skill Ripjaws XF3 1600 mhz
    - Sapphire HD 4870
    - Ocz Vertex II 60 Gb (windows 7)
    - Western Digital Blue Caviar 1 tb (storage)
    Today I flashed the bios using a bootable pen drive.
    Previously I had the 1.9 version and all went perfectly fine. The booting sequence was : 1 short beep, short beeps counting my usb devices and 1 final short high tonality beep.
    Now I updated to version 1.I and the beep sequence changed completely: now I have 1 long low tonality beep, short beeps counting my usb devices and no final short high tonality beep . Also it takes some more seconds than version 1.9 before making the beeps!
    I tried also versione 1.H (which I have in this very moment) and I experienced the same faulty beep sequence
    I also tried to clear c-mos and load optimized defaults but I still have the same beep sequence in both cases.
    What shall I do?
    Please notice I never changed memory or cpu settings (no overclock at all)

    Quote
    They say do not care about the beeps if the PC could work normally.
    Same thing I already told you... 
    Forgot about those stupid beeps.  As long as the system starts & boots fine, they are not critical error signals to begin with but status signs, that tell you that some things are there.
    Quote
    What do they mean by "the new bios should fix some beep error" ? Which bios are the talking about? Maybe the upcoming 1 L version which is going to be released in future?
    What they are telling you is that the beep sequence is not something to worry about. That the beeps "lie" so to speak and that you are looking for a meaning that is not there.
    Quote
    What beep sequence do you have with 1.C version compared to the two videos I posted ?
    It does not matter.  You are getting hung up on beeps even though the system is obviously running just fine.  If the beeps are getting on your nerves, then unplug the speaker from the board and enjoy the silence.
    This is a non-issue.  Stop being paranoid. 

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for