MSS UWL for PCRs

Hi,
I have gone through setting up UWL in How to guide from service market place and setup as in section 3 "minimal configuration". In section 3.7 it is asking to upload configuration file. Is it needed(even after all the steps) because this configuration is specific to MSS?? What else should be done to make PCR stuff to work completely?
thanks

well, it could work. I don't know, if you've missed something. just try it
can you see the workitems, your corresponding user has got in SBWP in the backend, too?
you can test it like this (if you have customized workflow in your backend):
- go to the backend, start transaction SWU3 (here you can see, whether workflow was customized)
- start the verification workflow (F5)
- you should receive workitems in your inbox (SBWP)
- you should see these workitems in your UWL, too
kr, achim

Similar Messages

Open Custom PCR forms (created using ISR framework) from UWL for approval

Hi,
I have made a custom JSP iview using the ISR framework .
The form can be submitted and a notification is created.
The Workflow is generating the workitem wihich appears in the
UWL worklist.
HOw can i open the custom JSP iview from the UWL for the workitem.
Helpful answers will be rewarded.
Thanks
Ritu

Hi Phil,
Interesting - I have a similar issue. We want to use the Request for Transfer scenario in ERP 2005, but it has not been developed in Adobe forms by SAP yet (it isn't available in 2004 either)! So, we have decided to use the old JSP PCRs instead.
Your issue is probably because you're using the same 2005 iviews to create your PCRs. The 2005 PCR iviews are written in WebDynpro, and appear to assume that each one will be an Adobe form! If you assign the old PCR iviews to your manager (give them the old MSS role under Migrated Content->EP5.0... in the pcd if you have it installed), you will be able to create a PCR with the JSP forms (regardless of the "Entry in Web" setting in QISRSCENARIO).
The next issue is the approval. In 2005, transaction SWFVISU has task TS50000075 configured as Java Webdynpro. You'll need to change that to iView, and specify ID = com.sap.pct.hcm.isrdispatcher.default. I'm following the UWL item type guide for this at:
http://help.sap.com/saphelp_nw04s/helpdata/en/b1/cc1357eead454bb144face4a66be7d/content.htm
Having said this, my approval is not working! The item type has clearly changed, because the workitem name is no longer a hyperlink (rather annoying), but when I hit the "Launch Task Page" button (default name I think) I get the error:
"Unable to perform action because the system returned an invalid URL"
I can't see this "invalid url" anywhere in the logs, so I can't see where it is getting it from, or what path, etc I'm meant to put! In your old system, what did you have as the "Server for ISR call" under "Additional Data for Scenario" in QISRSCENARIO? Also, what did you have in the "URL" box that appears under the Additional Data for Scenario button when you change the Entry Type to JSP?
Many thanks,
Russell.

UWL for ESS & MSS

Dear All,
Please provide me documents for configuring UWL for ESS & MSS
Thanks
Daya

Hi,
check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/6e0986d3bb4b05a08196a76c4a575f/frameset.htm
thanks,
gopal

EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals

Hi there,
Following the EP 7.0 migration, the UWL is not working for PCR approvals. Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
HTTP handler for starting an external service cannot be read
In order to rectify this, the following configuration file was uploaded.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>
Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing. The only available option available is an option to Forward the item.
I have tried the following ItemType names with the same result:
1. uwl.task.webflow.TS50000075.D46CLNT080
2. uwl.task.webflow.D46CLNT080_TS50000075
Has anyone encountered this before?
Cheers
John

FYI. The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
I did manage to get this working in the end. I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default. Update the UWL configuration to refer tot his PCD location as shown below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>

Problem in Approving Requisition Request in MSS UWL

Hi,
I'm facing problem in approving requisition request sent through Manager in MSS UWL.
We have configured standard process HR_MSSRCF_REQUISITION with ISR scenario is SRQ3. Workflow is WS45600028
Case: When I successfully Check & Send Requisition Request form from MSS Recruitment, it is coming in Manager UWL.
But, when i open the workitem for approval it is not coming as a PDF form with Approve Button in the bottom (Standard). Instead, it opening as per the below screen.
Please help to resolve this issue.
Regards

You should be giving the process reference number or workitem ID in transaction hrasr_test_process.
Which release you are on , what is the SP level of component EA-HRGXX?
Further as per note 972322 - HR Administrator: Migration WD4A - the start process application has been migrated to WDA.
Check the UWL XML configuration to see if the config is as below for the approval task...
APPLICATION     ASR_PROCESS_EXECUTE(For EhP4, otherwise application depends on the level of EA-HRGXX )
      DYNPARAM     WI_ID=${item.externalId}
      NAMESPACE     sap
      SYSTEM_ALIAS     <use your system alias>
A sample XML is available with note - 1371626 - UWL Configuration for HR Administrator BP version 1.51.
This appears to me to be a XML configuration issue. Collaborate with your portal and UWL config consultant.
Hope this helps.
Regards,
Sahir.

Leave Request Not Appearing in UWL for Manager

Hi,
We have a strange issue where leave requests are not appearing in the UWL for a specific manager. We have checked with other managers and the leaves are appearing in their UWLs and they are able to process their employee's leaves without any issue.
For the manager not seeing the leave in their UWL, I have confirmed the following:
1) Proper manager defaults in 'approver' field in ESS and employee is able to send leave request without issue
2) Manager receives email to process employees leave request after RPTARQEMAIL program runs
3) Leave is reaching the manager's business workplace in R/3 so this verifies workflow is working and the leave is being directed to proper manager for approval
4) Proper roles have been assigned to manager and verified in PRD
*Also, the leaves were appearing in the manager's UWL at one point but no longer appearing. This makes it more confusing!
Does anyone have any suggestions/ideas as to what may have happened?
Any feedback would be greatly appreicated!
Regards,
Brian

Hi:
We transported our ESS/MSS changes from the DEV client to STG client. I have verifiied the follwoing settings in STG:
1) SWU3 - all connections are green.
2) Workflow template and tasks - all are assigned as general task with agents assigned
3) Configuration in SAP contains the correct WF template for leave processing
4) UWL has been regenerated
I am able to submit a leave request under ESS user. I check workflow and it shows leave has been submitted and waiting for Manager to approve step.
However, under MSS user the leave request is not showing up in the UWL. All configuration on backend and the items noted above have been verified.
Is there configuration or a connection on the portal side that I need to check? Or anywhere else? Any input would be greatly appreciated.
Regards,
Brian

Customizing MSS UWL

Hi Experts,
I want to customize the MSS UWL as per the client requirement. they want to hide the three buttons
(Resubmit, Forward, Assign To Me) * from the UWL.
Could you please give some start on how to start the customization of the SAP delivered IView. And also belive that as a XML IView though not sure of it.
Thanks in advance for your help.
Regards,
Balaji

Hi,
Please check the link below:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Cheers-
Pramod

Configuring UWL for ESS

Hi All,
How to configure UWL for ESS & MSS Business Package in Portal
Thanks & Regards
Kirubakaran D.

The configuration of the UWL isn't so much for ESS and/or MSS as it is for just your portal users in general. The configuration of the UWL is actually done in the portal itself under the System Administration role. I suggest starting there and reading all the information. Also, the help.sap.com documentation on the UWL generally will step you through it all. Even in the MSS help documentation, there is a basic section on setting up "bare bones" UWL config. Have a go at that first.

No records in UWL for mdm

Hi all,
I have a problem with the UWL for MDM, no records are displayed. I have configured things after all the guides and articles found here on SDN and all connection tests are fine, data is displayed in the iVews. (for Vendors). There are tasks in the MDM system. I have restarted the portal server and all services, cleared the cache etc but without any luck..
Any ideas?
Cheers,
Max

Hi,
Looks like this:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'>
<UWLConfiguration version="1.0">
     <ItemTypes>
          <ItemType name="uwl.completedtask.mdm.all.SAP_MDM_Repository_Vendors.Vendors" connector="MdmUwlConnector" defaultView="MdmWorkItemsCompletedView" defaultAction="showMdmDetails" executionMode="default">
               <Actions>
                    <Action name="showMdmDetails" groupAction="no" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes">
                         <Properties>
                              <Property name="taskId" value="${item.jobId}"/>
                              <Property name="stepId" value="${item.stepId}"/>
                              <Property name="userId" value="${item.userNames}"/>
                              <Property name="workflowTable" value="${item.workflowTable}"/>
                              <Property name="externalRequestEvent" value="com.sap.pct.mdm.appl.masteriviews.events.externals.ViewTaskRecordsHandler"/>
                              <Property name="iview" value="pcd:portal_content/net.xx.semc/net.xx.MDM/net.xx.Pages/com.sap.pct.mdm.appl.vendors.search"/>
                         </Properties>
                         <Descriptions default="Show Record Details"/>
                    </Action>
                    <Action name="showHistory" handler="IViewLauncher" launchInNewWindow="yes" launchNewWindowFeatures="width=557,height=560,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                         <Properties>
                              <Property name="jobId" value="${item.jobId}"/>
                              <Property name="workflowTable" value="${item.workflowTable}"/>
                              <Property name="stepId" value="${item.stepId}"/>
                              <Property name="userId" value="${item.userNames}"/>
                              <Property name="systemId" value="${item.systemId}"/>
                              <Property name="iview" value="pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.workflow.taskhistory"/>
                         </Properties>
                         <Descriptions default="History"/>
                    </Action>
                    <Action name="createJob" handler="IViewLauncher" launchInNewWindow="yes" launchNewWindowFeatures="width=557,height=560,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.workflow.createjob"/>
                         </Properties>
                         <Descriptions default="Create Job"/>
                    </Action>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.mdm.jobs.SAP_MDM_Repository_Vendors.Vendors" connector="MdmUwlConnector" defaultView="MdmViewJobs" defaultAction="showMdmDetails" executionMode="default">
               <Actions>
                    <Action name="createJob" handler="IViewLauncher" launchInNewWindow="yes" launchNewWindowFeatures="width=557,height=560,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.workflow.createjob"/>
                         </Properties>
                         <Descriptions default="Create Job"/>
                    </Action>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.mdm.tasks.SAP_MDM_Repository_Vendors.Vendors" connector="MdmUwlConnector" defaultView="MdmViewTasks" defaultAction="showMdmDetails" executionMode="default">
               <Actions>
                    <Action name="showMdmDetails" groupAction="no" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes">
                         <Properties>
                              <Property name="taskId" value="${item.jobId}"/>
                              <Property name="stepId" value="${item.stepId}"/>
                              <Property name="userId" value="${item.userNames}"/>
                              <Property name="workflowTable" value="${item.workflowTable}"/>
                              <Property name="externalRequestEvent" value="com.sap.pct.mdm.appl.masteriviews.events.externals.ViewTaskRecordsHandler"/>
                              <Property name="iview" value="pcd:portal_content/net.xx.semc/net.xx.MDM/net.xx.Pages/com.sap.pct.mdm.appl.vendors.search"/>
                         </Properties>
                         <Descriptions default="Show Record Details"/>
                    </Action>
                    <Action name="showHistory" handler="IViewLauncher" launchInNewWindow="yes" launchNewWindowFeatures="width=557,height=560,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                         <Properties>
                              <Property name="jobId" value="${item.jobId}"/>
                              <Property name="workflowTable" value="${item.workflowTable}"/>
                              <Property name="stepId" value="${item.stepId}"/>
                              <Property name="userId" value="${item.userNames}"/>
                              <Property name="systemId" value="${item.systemId}"/>
                              <Property name="iview" value="pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.workflow.taskhistory"/>
                         </Properties>
                         <Descriptions default="History"/>
                    </Action>
                    <Action name="createJob" handler="IViewLauncher" launchInNewWindow="yes" launchNewWindowFeatures="width=557,height=560,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.workflow.createjob"/>
                         </Properties>
                         <Descriptions default="Create Job"/>
                    </Action>
               </Actions>
          </ItemType>
     </ItemTypes>
       <Views>
    <View name="MdmViewJobs" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.mdm.jobs" columnOrder="mdmStatus, priority, subject, jobId, userNames, dueDate, creatorId, createdDate" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="unread" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="top">
      <Descriptions default="My Open MDM Jobs"/>
      <DisplayAttributes>
        <DisplayAttribute name="workflowTable" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Workflow Table">
            <ShortDescriptions>
              <Description Language="en" Description="Workflow Table"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="userNames" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="User Names">
            <ShortDescriptions>
              <Description Language="en" Description="User Names"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="mdmStatus" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="MDM Status">
            <ShortDescriptions>
              <Description Language="en" Description="MDM Status"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="jobId" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Job ID">
            <ShortDescriptions>
              <Description Language="en" Description="Job ID"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
      </DisplayAttributes>
      <Actions>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
        <Action reference="personalize"/>
      </Actions>
    </View>
    <View name="MdmViewTasks" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.mdm.tasks" columnOrder="mdmStatus, priority, subject, jobId, userNames, dueDate, creatorId, createdDate" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="unread" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="top">
      <Descriptions default="My Open MDM Tasks"/>
      <DisplayAttributes>
        <DisplayAttribute name="workflowTable" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Workflow Table">
            <ShortDescriptions>
              <Description Language="en" Description="Workflow Table"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="userNames" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="User Names">
            <ShortDescriptions>
              <Description Language="en" Description="User Names"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="mdmStatus" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="MDM Status">
            <ShortDescriptions>
              <Description Language="en" Description="MDM Status"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="stepId" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Step ID">
            <ShortDescriptions>
              <Description Language="en" Description="Step ID"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="jobId" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Job ID">
            <ShortDescriptions>
              <Description Language="en" Description="Job ID"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="stepName" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Step Name">
            <ShortDescriptions>
              <Description Language="en" Description="Step Name"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
      </DisplayAttributes>
      <Actions>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
        <Action reference="personalize"/>
      </Actions>
    </View>
    <View name="MdmWorkItemsCompletedView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.completedtask.mdm.all" columnOrder="subject, jobId, userNames, creatorId, createdDate, status" sortby="creatorId:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="-1" dueDateSevere="0" dueDateWarning="0" emphasizedItems="unread" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="top">
      <Descriptions default="Completed MDM Tasks"/>
      <DisplayAttributes>
        <DisplayAttribute name="workflowTable" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Workflow Table">
            <ShortDescriptions>
              <Description Language="en" Description="Workflow Table"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="userNames" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="User Names">
            <ShortDescriptions>
              <Description Language="en" Description="User Names"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="jobId" type="string" width="10" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Step Name">
            <ShortDescriptions>
              <Description Language="en" Description="Job ID"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
      </DisplayAttributes>
      <Actions>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
        <Action reference="personalize"/>
      </Actions>
    </View>
</Views>
</UWLConfiguration>

Workitem exists in SAP Inbox But does not appear in UWL for some users

Hi,
We have a peculiar problem with a standard workflow. This workflow is working fine in SAP Inbox and UWL in portal for most of the users. But sometimes, it does not send workitem to UWL for some users.
Any input of as why this happens?

Hi All,
I had experienced this type of problem as well, just to share it could be that the Identity of the Portal user misses a role which can be solved by any user assigning the identity in their identity management or it could also be the connection status of the UWL to the backend, there should be at least two connection statuses for workflow items to get into the UWL I could not recall it but I would post it here once I have the access to our system again.
Cheers,

Doubt regarding Adobe forms used for PCR

Hey all,
I have a doubt regarding Adobe forms used for PCR.If i goto tc
<b>SFP->form name (ISR_FORM_SPPM)->Layout->XML SOURCE-->
<base><server name><port>/sap/bc/fp/form/layout/</base></b>
But in tc SICF,i do not have anything beyond FP.It goes like this :<b> sicf-> default_host->sap->bc->fp</b> .
Could this be the possible cause of error why i am not able to view the forms in PDF format?
Can anyone , who has doen this before, please help me out with this issue?
Thanks,
Aditi

Hi Aditi,
Are you getting an error when you are trying to access the PDF form ?
Is ADS installed and configured properly ? Also let me know the operating system you are using, it's version, J2EE and Portal version.
Regards,
Sunil

How to achieve Delegation & Substitution for GP system in UWL for CE 7.1

Hi all
Could you please guide me , how to achieve delegation & substitution concept for GP system in UWL for CE 7.1.
when i am trying to click on the Manage Delegation dropdown link which was there in top right corner of the UWL screen , then i am getting the error as " No system is activated for substitution rule " .
Could you please tell me in our scenario how to activate the System for delegation rule since we are using GP system for GP related tasks in UWL. in all the documents they have mentioned how to achieve the same in R/3 workflow tasks but we are looking for GP tasks how to activate system.
Is there any changes are required in UWL XML files for achieving this substitution & delegation rule for CE 7.1??
In EP 7.0 how this delegation & substitution was enabled in UWL , could you pls tell me what are the changes are required to be done??
if anybody helps on this then it is great help!
Regards
Sunil

Hi Sr,
There is Trails view in Result . which is newly introduced by Oracle.
With the help of this you can achive this solution.
Thanks & Regards
Rahul

Service specific ESS/MSS customizing for netherlands

Hello experts,
could anyone please let me know if there are country specific ESS/MSS scenarios for netherlands are available. I couldn't find anytihing in the help.sap.com documentation.
Many thanks
Marco

Hi Marco
There should be specific country services for ESS netherlands - You should be able to see the following in the Homepage Framework customizing table of the back-end ECC system -->
EMPLOYEE_ADDRESS_NL_SERVICE
EMPLOYEE_ADDRESS_NL_SERVICE05
EMPLOYEE_BANK_NL_SERVICE
EMPLOYEE_BANK_NL_SERVICE05
EMPLOYEE_FAMMEMBER_NL_SERVICE
EMPLOYEE_FAMMEMBER_NL_SERVICE0
EMPLOYEE_PERSDATA_NL_SERVICE
EMPLOYEE_PERSDATA_NL_SERVICE05
The actual iviews and WD applications should be visible in the Portal PCD under the ESS role end user content or in J2EE WD content administrator under essnlxxx
If they are not available it could be you are missing essential ESS software components or have a different technology platform and older ESS version or too low an SP stack
MSS is general functionality which should be available in Dutch - this may be BP dependant therefore please check release notes or any download information for the software component for more details
Hope this helps
Stuart

How to check different HR-ESS/MSS services for TMC,Succession in SE80

Hi Experts,
I am tring to check the services , i have few queries:
How to check different HR-ESS/MSS services for TMC,Succession in SE80. I want to test them,
I went through Ripository browser but could not able to locate the HR applications.
I tried with SICF but got only few service names.
Please guide me on the same.

http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2014/04/18/hcm-ehp5-ehp6-and-hr-renewal-important-links-and-documents See last section of the blog in Se80, alos, you can check via Se80>paoc_ESs, PAOC_MSS, PAOC_TMC ie package > PAOC_* http://help.sap.com/erp_hcm_ias_2012_01/helpdata/en/b7/238005419a4f5baa28351e21498e6f/content.htm

Configuring UWL for MDM

Hi All,
I am working on an EP MDM scenario where i have to configure a UWL for MDM. Can anybody please provide me with the step by step details of how to perform this task??
Is the procedure different for Custom MDM repositories??
Also, do i need to work on Guided Procedures for this??
Please help me out at the earliest as it is very urgent!!!
Useful answers will surely be rewarded.
Thanks,
Becky.
Edited by: Becky Joseph on May 8, 2008 5:53 AM

Hi Becky,
Please follow the below steps:
1. Deploy the SCAs available with the MDM Installables in the Portal Content and JAVA API on the portal.
2. Restart the Portal Server.
3. Create the MDM System with system alias and User mapping and test the connection with the MDM System.Assign the main table name in the Tables with Workflows property of the System.
4. Search for the eu role and assign it to the user
5. Go to the System Administration -> Support -> Portal Runtime -> Application Console. Select the com.sap.netweaver.bc.UWL from the drop down list and there you will get the option of refresh.Also below that there will be two restart options do all these things.
6. Again select com.sap.MDM.UWL from the drop down list and refresh and restart it.
7. Go to the System Administration -> System Configuration and select the Universal Worklist from the Detailed navigation pane.
8. Create the new Universal Worklist System and assign the System Alias of the system that you have created previously and select the connector type as MDMUWLConnector.
9. Deactivate and Activate again to clear the Cache.
10 . Your Workflow records should be visible in the Work role created after assigning the eu role to the user.
Also refer to the below document for better picture
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/771f1a61-0e01-0010-daa9-93a52905da09]
Regards,
Jitesh Talreja

MSS UWL for PCRs

Similar Messages

Maybe you are looking for