Mttr / mtbr won't include all work orders

When I use MCJB transaction, for a piece of equipment, some of the notifications are in green and not add to the total down time, or number of actual breakdowns, can some one tell me why and how to fix them.

They are very much dependent on the actual values in the notification associated to the object. Have a look at [SAP Help|http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/37699d449a11d188fe0000e8322f96/frameset.htm] to help in truble shooting the output values.
Regards
Narasimhan

Similar Messages

Imporing scope of work from Work Orders

Hi..Experts,
Can any one suggest me how to import scope of work mentioned in the work orders into reports.
Regards,
Suman

It is text which is available in header.
Kindly let me how import scope of work of all work orders to excel.
Regards,

Iphone 4 headphone socket not working headphones won't go all the way in

My iphone 4 headphone socket not working, the headphones won't go all the way in? any help, ideas?

I bough a new ipad two a few feels ago and still haven't managed to used any headphones with it.
It's very annoying as I'm currently in hospital and will be for a few more weeks and this being the reason I bought it!! Now I have to have it on very low volume and not use it in the evening

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario

24" LED Display won't light but other functions all work

My 24" LED Display suddenly won't light (it flashes the desktop once in a while). The sound, the USB ports, and the Magsafe power all work. It's just the display that isn't functioning. 1) Is there a fix? 2) Will Apple take on the repair for the $400 fixed repair fee? Thanks

I have the same display and mine burned out on the same day as yours. I wonder if our displays were made at the same time and the backlights are all reaching EOL. It is somewhere over four years old (discontinued in 2010); one year after support runs out if it is tied to a computer purchased with Apple Care (I did this for my Airport Time Capsule). I used my display a lot as I work from home. It never occurred to me the backlight would burn out.
My question specifically is the cost of replacing the backlights. How much is it? Is it worth it? The current Dell Ultra Sharp 24" monitor is about $500 and is better resolution and color. If I could afford it, I would buy the Retina iMac, just for the display, although the computer is pretty hot too;-).

Why won't my email work on my new iphone 4. I have input all the correct info but can't seem to send emails.?

Why won't my email work on my new iphone 4. I have input all info but can't wsend or receive?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

First try a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If still no luck, try downloading another free app from the App Store.
More troubleshooting here.
http://support.apple.com/kb/ts1702
Lastly, try to restore the iPod from a previous backup or restoring it to factory settings.
B-rock

Recently bought new printer. All works fine with one OSX user. However, cannot print anything on other OSX user, including cannot print Adobe PDFs or to new printer. Puzzling!

computer = Mac PowerPC G5
OS = 10.4.11
Adobe Acrobat 7
HP laserjet M1212nf
I recently bought a new HP printer. I was on an admin user when I installed it. All works fine with this admin account/user. I can print to the HP, print to Adobe PDFs.
However, when I then go over to another user account, I cannot print *anything*. I cannot print to Adobe PDF, cannot print to the new HP. If I try to print an excel file, it says "cannot communicate with the printer" along with some useless suggestions. If I try to print a page on FireFox, nothing happens. That is, sure I get the usual dialog box, click the appropriate choice of printer, click the number of copies, then click the OK button ... and nothing happens. No pdf process is started. Nothing is sent to the HP printer.
The fact that both printer options are not working suggests it is some kind of OS problem, not specific to either printer "device".
Any assistance is appreciated! Thanks!

Hi BDAqua,
Thanks for the suggestion. I'm a bit leery of trying that. I would think that if the driver was not installed, then none of my users could use the printer. However, both admin users can use the new printer. The list of available printers is:
Adobe PDF 7.0
New HP Printer
I also used to have Old HP Printer, which I removed. Before, Users A, B and C could use both the Adobe PDF and the Old HP printers. Then, after I added the New HP Printer, it showed up in the list of printers for all three users. However, after I added the new printer, only the two admin accounts, users A and C, can actually print anything. Both users A and C can use the Adobe PDF printer AND the New HP Printer. But I get error messages with user B, for both the Adobe PDF printer and the New HP Printer.

Selecting all the work orders for equipment

Hi
i need all the orders(AUFNR) for each equipment(EQUNR) can any one tell me the relation betwwn those tables (aufk, equi)

Hi,
Use the View VIAUF_AFVC to fetch the orders for a equipment.
Regards,
Anji

IPod touch won't sync all songs in playlist

My son bought a brand-new iPod touch yesterday. He has been trying to compile his playlist and sync it to the new iPod. He has 41 songs on his playlist and only 22 of them will sync. They are all in the iTunes library and the iPod library, but not on the playlist. We tried changing Settings>Music>Group by Album Artist>Off, and that doesn't work. We've also created new playlists and tried syncing those, and that doesn't work either. Today, I noticed that my iPod Touch is doing the very same thing. We have the most recent software and many of the songs were purchased directly through iTunes.
Any thoughts? We've had my son's iPod for 2 days and there is ABSOLUTELY NO WAY I am paying Apple support for help on something that seems to be an inbred error on their part.
Thanks in advance!

I had the same problem as well and tried so many of these solutions, but no luck. I just got a new laptop with windows 8 and when I hooked my iTouch4 to my computer it only show 36 songs out of 509 of the ones I have on my iTouch. (I was freaking out because I thought windows 8 had something to do with it, but as usual I was being paranoid )
I found a way to put the rest of my music on my USB and hooked it to my laptop and put that music in a separate folder. I had all of them play onto iTunes. Now they all worked on iTunes, but I realized they didn't really sync onto my iTouch. To test it out a bought a new song on iTunes and clicked "sync" onto my iTouch, but nothing happened.
So I started searching for answers, but none of the methods solved my problem. So I started messing around with it and realized that the problem was ACTUALLY A SIMPLE SOLUTION.
So this is what I did...
1) Start playing one of the songs that won't sync to your iTouch4
(don't know how to sync all songs at once yet)
2) Now right click at the top bar of iTunes where it shows the song playing
right click on album picture
3) Then scroll to "Add to Playlist"
the arrow of "Add to Playlist" will show a list of your own playlists and the name of your iPod
4) Click on the name of your iPod Ex) Robert's iPod
5) Then (you can stop playing song at this point) click on iPod device
This should right away take you to "Summary"
6) Instead of being on "Summary" look for "On This iPod" - Click it
7) Now "On This iPod" show a list of all the music that is currently on your iTouch
(including the song you just added from iTunes by following these steps)
8) Make sure all the songs you want in the list have been marked with a "check mark"
9) Then click "sync"
Check iTouch to see if song downloaded...
*If not then - still on "On This iPod" - click on "Autofill"
(Wait for it to load)
Now click "sync"
You should now have the songs on your iTouch as well!
It's a simple solution, but I haven't seen anyone advicing it and I wish they had so I didn't have to go through all this trouble
Hopefully this helps!!!

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

Using a hierarchy but also showing work orders that are not in hierarchy

good morning bi people,
i have a requirement to show data from a hierarchy which includes Operation and Maintenance information. for example it has an account broken into labour/material/trucking and below this is the pm acivity type and secondary cost element (concatenated). this hierarchy is a manually created hierarchy that is uploaded to BW and is not in ECC. The users do not want to see the concatenated field at the end of the hierarchy, but instead, want to see the Work Orders that have the PM activity types.
At the present time, we have the report using the hierarchy but we need the work orders to replace the pm activity type/secondary cost element concatenated field. the work order field is a free characteristic and when we drag in the work order in analyzer, it works correctly.
1) is this possible to use the hierarchy and somehow map the work order field to the end of the hierarchy within crystal?
2) do you have a suggestion to change the hierarchy, without being a manual nightmare?
all conversations are welcome.
Erik

Good Day Ingo,
i have created a word document with screen shots of the hierarchy from BW, a screen shot of the BEx showing the free characteristic of Maintenance Order and a screen shot of the crystal report with the PM Activity type concatenated to the Cost Element. Once again, we do not wish to see the concatenated field, but rather see the Maintenance orders that have a PM Activity type the same as the concatenated field.
here is the link.
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B1j5hXTptfntYWI1MDUzNGEtY2MxNy00YmMzLWJjZjEtZDA4OGZiYmMyNzFh&hl=en&authkey=CKq4xcgJ
thanks Ingo,
Erik

Material Availability check during work order creation and Release

Hello All,
We are checking material availability at creation as well as release
Say we have Material XYZ=100 in stock MMBE
Now XYZ =100 is say at normal storage location =75
and scrap storage location=05 and serviceable =20
Currently when availability check is performed it checks for 95 (It excludes scrap storage location 05 )
but we want Availability check to be only for normal stock =75 and not for Serviceable and Scrap location
how to do this in configuration or via exits
Since if the material is under Scrap location it is not counting in Availability check at work order creation this logic is working fine but I do know from where this control is put that when the material is in the stock of scrap it is not counting in Availability check for work orders.Same thing I want to extend it to Serviceable stock .
Why not it is consider it for Scrap storage location , what is config or any MM enhancement
So that when Availability check run it will not consider Materials at SCRAP as well as SERVISABLE storage location also.
Please have your views on this
Regards
pratap

Hello
There are two option for your requiement
1. Changing the status of the servisable storage location stock to restricted use stock . You can include or exclude this stock status material in OPJJ. This solution is not storage location dependent. It is stock status dependent.
2. Please refer the enhancement for the storage location determination. I am not sure about this funtionality:
For production orders the following enhancement is available:
PPCO0005 enhancement for storage loc. determination/backflushing
You can use this enhancement to change the storage location and the indicator 'backflushing' in the reservation.
The enhancement PPCO0005 contains the following enhancement components:
Function exit
EXIT_SAPLCOSD_001 storage location determination/backflushing
You can find the description in modification text of the function exit.
You can find an example of the user exit in the function group XC01 in the include LXCO1F05.
warm regards
Ramakrishna

Work Order Material Availability Check Customizing

Hi,
I am currently trying to set up material availability check in the work order before saving. I am testing it by entering a material in the work order for which there is zero stock. Then clicking on ORDER > FUNCTIONS > AVAILABILITY > CHECK STOCK MATERIAL. However SAP would return 'All checked materials in order 100000317 are available' in status bar.
My customizing is as follows:
Define Checking Rules (SPRO):
PM     Checking rule for plant maintenance
Define Scope of Check (OPJJ):
   Availability Check: 01 (Daily Requirements)
   Checking Rule: PM (Checking rule for plant maintenance)
   Availability check: 2 (Check availability during order release)
    Stocks
    Include safety stock: X
    StockIn Transfer: X
    Incl. quality insp. stock: X
    Replenishment lead time
    Check without RLT: X
    In/outward movement
    Incl. purchase orders: X
    Incl. purchase requisitions: X
    Incl. dependant reqs: X
    Include reservations: X
    Include sales reqmts: X
    Include deliveries: X
    Incl. planned orders: X (check all planned o)
    Incl. production orders: X (take all production)
Define Scope of Check (OIOI):
   Plant: (Corresponds to Work Order)
   Order Type: (Corresponds to Work Order)
   Check material availability when saving order: X
   Check rule: 02 (Corresponds to material being used)
   Release Material: 3 (No release if parts are missing)
   PRT Availability: No check
   Capacity Availability: No check
I would appreciate if you could indicate if I am missing something in the customizing or if there is some sort of error. I would like SAP to display a system message on the status bar stating that this material is not available once the user enters this material.
Regards,
Nikolai

I'am facing the almost the same problem. Could anyone tell me:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-

Query on MCJC - MTTR/MTBR Functional Location report in Plant Maintenance

We have recently upgraded our SAP 4.7 system to mySAP ERP 2005 ecc6.0.
We are facing problem in report derived using tcode'MCJC' in Plant Maintenance.When we execute MCJC (MCJC - MTTR/MTBR Functional Location ) transaction, there is no data appearing in the report output.This report is used to get the functional locationwise data from maintenance order. The transactions are entered for creating maintenance order & notifications through IW31. This is getting updated in table s070.
This is a standard report and was working fine in SAP 4.7.

Hello Mr Subrahmanyam,
When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
Hope I am able to clarify.
Regards,
Yawar Khan

Mttr / mtbr won't include all work orders

Similar Messages

Maybe you are looking for