Multi-load flash won't run in browser

I have a flash file that plays an intro and presents a table of contents. Each "chapter" loads a different movie into the movie container. Works great by itself which you can see here:
http://www.lionprecision.com/tech-library/technotes/tech-flash/cve/c-v-e-player.swf
However, when I place the main swf (c-v-e-player.swf) in a web page using Dreamweaver, I only get the intro and TOC, but the chapters won't play, as you can see here:
http://www.lionprecision.com/tech-library/technotes/tech-flash/f-article-0011-cve.html
Can anyone provide insight into this? Perhaps I should post on Flash Forum instead? Think I'll do that too.
TIA,
Mark

Hi Mark,
I would assume this has to do with the paths you are using to load the external SWF and/or FLV files. Because the SWF exists in the "cve" folder and the HTML page exists one level higher, there may be an issue with not finding the appropriate content. If you create an HTML page in the "cve" folder and use DW to place the SWF in that page does it work? If so, then you'll have to go back to the Flash authoring environment to make sure the paths to load the external SWF/FLV content will work.
Hope that helps.
Thanks,
Josh Margulis
Adobe Senior Solutions Engineer

Similar Messages

Flash won't run, says its not loaded, when its embedded on samsung tablet and Windows 8.

On samsung tablet 500T windows 8 flash is embedded. It says when I try to run flash that it is not loaded. I followed all of the help and made sure all of the settings are correct. It still will not run. The only error is that it is NOT LOADED to download it from adobe.
Doug

Hmm, have you verified that active x filtering is not enabled? You've probably tried the steps outlined here but take a look just in case.
Enabling Flash Player in Internet Explorer
ActiveX Filtering in Internet Explorer

Flash won't play in browser, only on local system

Hi,
When I use 'finder' to open and play this SWF, the track plays fine. As soon as I drag the SWF onto my html web page and preview in the browser, it is not functioning, so no sound plays. How do I need to tweak this so it could play? Here are the actions also:
var loadSnd:URLRequest = new URLRequest("Snow.mp3");
var thisSnd:Sound = new Sound();
var sndTrans:SoundChannel = new SoundChannel();
thisSnd.load(loadSnd);
play_btn.addEventListener(MouseEvent.CLICK, playF);
stop_btn.visible = false;
stop_btn.addEventListener(MouseEvent.CLICK, stopF);
function playF(event:MouseEvent):void{
//SoundMixer.stopAll(); << enable only if you don't want sounds to double-up based upon clicking the play button numerous times; avoids overlaps
sndTrans = thisSnd.play();
play_btn.visible = false;
stop_btn.visible = true;
function stopF(event:MouseEvent):void{
sndTrans.stop();
stop_btn.visible = false;
play_btn.visible = true;
Here is the page:
www.c2cstudios.com/test
Please advise as to what I need to modify...thought it may have been a path issue, but now I do not know for certain. Thanks!

When I open those links, I get blank pages. I wonder if they are uploaded properly. The MP3 should play directly in my browser and I should see player controls to start and stop the movie, but I don't see them. To see if the flash movie actually loads, you could give it a background color like red or yellow. If you don't see that, it means you didn't upload it or something went wrong. When I rightclick in a working Flash movie, I see a different context menu with options like "zoom in". I can't do that anywhere, which makes me suspicious.
So I tested using HTTPFox (Firefox addon) and got the following results, which means both files are problematic, so they are not uploaded properly.
05:05:28.935 0.473 513 2190 GET (Aborted) application/x-shockwave-flash (NS_BINDING_ABORTED) http://c2cstudios.com/test/sound/snow.swf
05:06:27.069 0.485 516 9.8M GET (Aborted) audio/mpeg (NS_BINDING_ABORTED) http://c2cstudios.com/test/sound/Snow.mp3

Unable to load flash-based website in any browser

I'm on Windows XP SP2 with the latest flashplayer installed
(9,0,47,0). For some reason I can no longer get beatport.com to
load in any web browser on my computer, i.e. Firefox, IE, or even
Netscape. The website partially loads, leaving me with just the
"green frames" and then stops. I can access this website just fine
from my friend's computer, also Windows XP.
Does anyone have any ideas of what's going on???

I didn't think reinstalling was gonna do me any good except for getting rid of every single thing I have ever installed since getting this MBP. I'm thinking it has to be something that is on my computer causing this, especially since it only affects my ability to get to this one site and I only started seeing this problem yesterday.
So, I went ahead and disabled all my Chrome extensions and I don't have any Safari extensions at all. That didn't fix my issue.
I've been trying to run Sophos on here, thinking that maybe I've got a Trojan or some kind of malware, but it never seems to finish a full scan of my hard drive. That "Plugin" that I mentioned above has me very suspicious, except that whatever that is, it's been on my computer since basically when I first got it. Maybe it's malicious, or maybe it's just a poorly named piece of software. In any case, it got updated last night around 11pm, about the same time I noticed my problem. After trying everything I have, it's hard for me to overlook that as coincidence.
But, where do I go to gain more information about what that could be? I should mention that this MBP is basically my first Apple computer. I've been a PC guy (still am mostly) forever, but I finally dove in and got a Mac to start iOS development. So I'm sure there are ways to get more information than I am currently aware of.
Also, apologies if I posted this in the wrong forum.

Safari won't load; Autoupdate won't run

I've been having trouble with Safari since Christmas. It won't load most web pages (Google, for example). i've tried following the instructions on some of the previous posts, without any success. I've even reloaded the operating system. In addition to the Safari problem, autoupdate won't work for any of my software. I keep getting an error message that I'm not connected to the internet, but when I run the diagnostics, everything checks out. I don't have these problems when I use dial-up service, only with DSL, but it's not the line nor my service provider. A Windows machine works perfectly on the same cable. I've tried the following:
-clearing cache and history
-restarting modem and iBook
-clearing duplicate fonts from font book
-reloading 10.4.8 and all the software
-using Safari from a new test account
-trashing the icons folder
-moving the com.apple.safari.plist file onto the desk top and restarting Safari
Your assistance would be much appreciated! (And your patience - I'm not very Mac literate yet)

Hi again,
Did you run disk permissions repair after your updates if not do so now.
If you are not sure how see Travis A.'s Regular Maintenance/General Troubleshooting
Okay, so you connect via Ethernet, did you enter, or do you already have DNS #s already entered, in your settings you said only that the ISP confirmed your settings.
Get the Dns #s from your ISP I can not find them on the portforward web-site.
However these: ORSC Public Access DNS Nameservers (Anyone can use these, no matter what ISP)
199.166.24.253
199.166.27.253
199.166.28.10
199.166.29.3
199.166.31.3
195.117.6.25
204.57.55.100
Enter the DNS #s in the Network and in the Airport admin utility app found in Utilities (I think it is the Internet tab > & click on the Update button.
See this document for more Quick Assist
Quit Software Updater if it is not:
In Home~/Library/Preferences/ com.apple.Software Update.plist
move the file to the trash.
Do a restart of your computer.
So you know, auto-updating is best disabled since disk permissions repairs should be run prior [ some disagree on the prior I am not one of them]
& after all apple updates see the macmap site I linked you to in my other post.
As for Web archives the best way to save them is as a pdf, under the
"File"menu Print-> when that drops down Save as PDF, that has proved to be more reliable for me.
Eme

Adobe Flash won't run on google chrome after downloading OS X Yosemite.

Adobe Flash Player is either running really slow or not running at all on Chrome. I tried Safari and it runs slow on that too. Tried redownloading adobe flash player and that didn't work. Everything on my computer is also running slow that uses internet and I've checked the internet, thats working fine.
Help Me Please!?!?

Contact Google. As for Safari I find that it works just fine. Be sure to upgrade to Adobe Flash Player 15.0.0.223.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Installed flash won't run on Mac OS 10.5.8?

Flash Player 10.3 has stopped working on Safari on our Mac OS x 10.5.8; I have installed/uninstalled it several times but we still get the same message. I have researched this forum and thought I had found success on a question posed Sep 26, 2011, however when went to Safari-Help-Installed Plug ins, there isn't one listed for Flash, so that answer won't solve our problem. Flash Player.plugin and flashplayer.xpt are both listed in library/internet plug-ins folder. Please help!

Have you got the answer to this because I have the same problem!! I use a Mac g4 and have version OSX10.5.8. Until the other day I could use Flash player. I am not an expert but can normally solve most problems. This is driving me mad. Can anyone help?
Many thanks

HELP...My Flash won't run!

Test Page
Here
Wierd, it was working a week ago??
The flash is fine:
Test
Page Here
Hope I am doing something stupid, we can all have a good
laugh!
Thanks
Richard

You have the "standard problem". Open the page in the browser
and note that
you immediately see a javascript error.
AC_FL_RunContent is not defined
[Break on this error] AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/...
This means that your Scripts folder is not where the code
says it is. You
say it's here -
<script src="../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
but it's not - it's here -
http://www.adelantedesign.co.uk/Scripts/AC_RunActiveContent.js
(outside the current page's "root")
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RICH POW" <[email protected]> wrote in
message
news:g9jiei$bh6$[email protected]..
> No, not from a template.
> This is a single page. Big fat background image and one
.swf file.
>
> Just for discussion with the client at the moment.
>
> Rich

Flash won't run the flex application (swf)

I'm Italian so my english isn't perfect....
I try to run a flex application (swf) on a pc without flash
player 9 (8.5) (on firefox and IE)....the flex application ask
correctly if i want to install the flash player....but anyway,
after the installation....the flex application doesn't run....
also, i try to restart the pc....but....swf doesn't
run.....anybody have the same problem ??

Hung program: command-option-esc
Shut down: hold down power button for 5-10 seconds.

Flash won't run with IE7

I am running IE7 and have "successfully" downloaded Flash 9
numerous times (according to the Adobe website) yet it doesn't run.
I can find no record of it on my pc and keep getting prompted by
websites that I need to download Flash (particularly frustrating as
my kids look over my shoulder wanting to get into Webkinz but I
can't!!).
Looking for help as to why. Do I need to change some IE
setting or do something else to get it to run? The fact that I
can't find any reference to Flash anywhere in my PC despite the
successful download is particularly puzzling.

Hi trey3man,
If you can see the version 9.0.115.0 from this site:
http://www.macromedia.com/software/flash/about/
Flash Player is installed and working.
I would check to see that your IE settings are appropriately
set to play this specific site.

Applet won't run in browser

I created an applet that writes and reads from a text file. It works when I run it in eclipse but not in a browser.
Noob

By default applets can't read the local filesystem. Presumably Eclipse lets you do it to make development easier. If you want your applet to read the local filesystem, you apparently have to sign it.

Flash won't run

I have a new Macbook Pro, running on OSX 10.9, and i installed Flash but when I go on youtube it wont run when I go on youtube.com it says i still need to install the latest version of flash. When I installed it, it said it was complete, that I completed step 3 of 3. I looked at the trouble shooting and I did everything right, cookies ok, pop up windows are not blocked. I dont know what the problem is???

Safari or Firefox?

Flash won't run or uninstall

When a video comes up on a news site, it says flash player not installed. I checked and the site says it is installed and updated. I tried to uninstall and it tells me to close all windows. I did that and it still says close windows. I cleared cookies and history and rebooted and tried to uninstall and it still says to close all windows, which aren't open. I went to adobes site and tried to install from there and it tells me to close all windows. I downloaded the uninstaller to my computer and tried to run it and it says to close all windows, which are closed. Help!

http://forums.adobe.com/thread/1195540

Flash won't run smoothly

Hi, I've created a short into flash for a website-to-be but
it pauses and doesn't run smooth when uploaded to the site. The
flash movie is only 600 kb. What can I do to fix this?
http://www.highmarkdesigns.com/Proofing/worldfamous/animation/intro.html

Hi Hanna,
The Save and Compact is an option right under the Save
option. It removes any memory of changes made and objects that no
longer exist. But if everything in that piece is a jpeg, that's not
likely to change it much.
Based on the visual quality of the jpegs, I'd say they are
probably high KB pieces... GIF's would be more appropriate and
would probably provide some file size savings. jpgs are better for
images with lots of colors and shades. GIFs are better for images
with limited colors and large color areas like in that piece.
Is the 600KB all involved with just that one scene? If so, I
personally would redraw it all in Flash, just for the KB savings,
but that's me. As I said, the amount of graphics there would amount
to next to nothing as Flash drawn graphics.

Flash won't run on server but runs in test environment

I created a flv file from a mov file inserted it into a htm
page. In the test environment it work (testing from Dreamweaver). I
load it on a 2003 windows server (checked the Mime Type already) in
a subdirectory off the root and it doesn't work. Below is the
script code from the html file for the script part
What am I missing??
Thanks
GK

Hi zooz8,
might this help you:
http://www.goldschmiede-blumberg.de/adobFlash01.php
I used the defaults of your site.
Sometimes helpful: rebuild your site or make the cache empty.
Hans-G.

Multi-load flash won't run in browser

Similar Messages

Maybe you are looking for