Multi mapping after container append operation gets only first message

XI environment with SP16
I have a simple integration process scenario with a container operation collecting two messages (identical).
The input to the interface mapping correctly has 0..outbounded and the map is just a java pass through. The process consists of just one receive step, two container operations, a transformation step and a async send step. The output received only contains the first
message in the collection.
Is there any obvious reason why this is happening? (I have checked and rechecked for proper types, attributes, and tested the transformation step individually.
Thanks in advance for any help.
Krish

Hi Henrique,
Thanks for your response.
I did have 0..unbounded in the source message settings. (I did see the <Messsages>.. wrapper in the Test tab and in fact it works ok if we use Message Mapping (in my case where multiple messages are of the same type). However, when I have multiple (different) type messages, I got a Mapping..BaseruntimeException even though it worked ok during unit test.
Now, if I have a Java mapping, it clearly does not pass multiple messages (with 0..unbounded in interface mapping for source). I only get the first in the collection.
I have a feeling that XI does not do any preprocessing in the case of Java mapping step (including the wrapping of multiple messages). If that is true, then it is a bug.
Another thing: when I have different type of messages as input - not a collection but distinct message types in the interface mapping - and if I have Java mapping, then I get an error "No Message interface defined for parameter 2" in the workflow log. But I am more concerned with why it does not wrap multiple messages and pass it to the java mapping transformation step.
Regards,
Krish

Similar Messages

After checking voicemail I get a text message from 'unknown' with empty text bubble. How do I fix this?

I just upgraded to iPhone 5-- after checking voicemail I get a text message from 'unknown' with empty text bubble. How do I fix this?

I was one of the folks saing its on your email side but this explanation is a lot better and now I agree its obviously not your email thats the issue...
try this
1. Login to your Verizon account.
2. Click on “Account” at the top and then “Change Features” from the bottom right.
3. Select the device you would like to remove the service from.
4. Then scroll down until you find “Contact Management” and click “Remove

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

What to do after you change your Apple ID email address or password - Apple Support
ÇÇÇ

After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

I run with the Nano and shoe sensor. After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

Same issue here. This is really disappointing. I used to look forward to the milestone messages after each run, especially when I was surprised by a celebrity voice. Now, it's the same thing every single time, "Congratulations on another 250 miles. Way to go!" or something along those lines. I was proud of the 250 mile mark, but please...I don't want to hear it every time!
I hope there's some movement on this issue.
~ Heather

Itunes gives me the message that it has detected an ipod in recovery mode, you must restore the ipod. when I clikk the "restore" button the download begins and after 30 minutes, I get the original message that itunes detects an ipod in recovery mode.

iTunes gives me the message that it has detected an iPod in recovery mode and that I need to restore the factory settings. When I click the "restore" button iTunes downloads the software. This is a 30 minute process. Once the download completes, I get the same message "iTunes detects an iPod in recovery mode....". I'm running Windows Vista and ZoneAlarm security software.
I've tried this restore function multiple times and still get the same results.
I've also tried resetting the iPod by holding the wake/sleep button and the Home button at the same time. The iPod turns on but shows the icons of a usb cable connecting to iTunes.
Any help would be greatly appreciated.

This maybe yuor problem:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .

Evert ime i close a pdf i get the following message - rthe orgnizer data base is damaged and will be reset the next time acrobat is launched but after relaunching i still get the same message

every time i close a pdf i get the following message - the orgnizer data base is damaged and will be reset the next time acrobat is launched but after launching
i still get the same message

You must be using an old version of Acrobat as Organizer hasn't been in the last two versions of Acrobat. Here is the KB that covers that old error: Error "The Organizer Database is damaged and will be reset..." | Acrobat 9

After loading lion, I get an error message "There was a problem connecting with the server. URL's with the type "file" are not supported."

After loading Lion, I have been getting an error message "There was a problem connecting to the server. URLs with the type "file:" are not supported." There does not seem to be any actual problem with internet connectivity, but it is persistent and annoying. Any idea of its cause and treatment?

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

How to get only error message which i want to display.

hello,
In my main system i am using power supply which is connected with different instruments like data logger ,GSM,GPS....
In my main vi all the subvi of power system ,gsm etc...are conected with each other.
now I want to make some changes,
for example when i run my vi then it should seems pop up msg like Make sure your power supply is on.
and if suppose its not on then display the pop up msg that your power supply is off, then system should be off,means no need to do further operation.
here i attach my vi in that i made some logic regarding to this,in that when i run my main vi i get msg for make sure that power supply is on.
but when power supply is off then i got error msg like your power supply is off and after cliking on ok error vi is open that i dont want,that all i attached here.
i only want msg that your power supply is off and then system should be off,nothing more.
will you please guide me that what king of changes i needed for that.
thank you very much in advance.
Solved!
Go to Solution.
Attachments:
HMP POWER ON.vi ‏18 KB
1.png ‏156 KB
2.png ‏178 KB

There's no need for the while loops. What you really want is a case structure from the error cluster in order to decide whether or not to show the error dialog.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
HMP POWER ON_BD.png ‏22 KB

.vcf contains multiple contacts, but only first contact appears on nano?

Hi- love my nano, but am having trouble getting contact info into it.
I use Palm Desktop (not Outlook) for Windows (that won't get me shot here, I hope!) and exported multiple (about 30) of my Palm contacts in one .vcf file (version 2.1), but when I copy said .vcf file into my nano\contacts folder (treating it as a hard disk) and pull up Contacts on the nano, the device only displays the first contact in the file, not all contacts.
While I didn't find any threads here about this specific issue, I did see some old threads elsewhere about importing multiple-vs-single-contact .vcf files, but they seemed to pertain to the 3G/4G iPod, not the nano.
Is it possible that the nano can just handle single-contact .vcf files?
At the risk of repeating myself, the issue is not the exporting -- I can open the .vcf file in a text editor and see that all contacts are contained therein -- it's in getting the nano to display all of the contacts listed in the file, not just the first one.
I apologize in advance if I've breached any posting etiquette. I'm a quick learner, so a slap to the wrist should be sufficient.
TIA- AndymanD
Windows XP

Information on adding contacts manually available here in the iPod 101:
http://www.apple.com/support/ipod101/maximize/2/
Regards,
Colin R.

Xml parsing to get only first node.

Hello,
I am trying to parse the following xml tag. I want only the first node of the ORDER_PAYMENT_DETAIL element, and then other node element.
I would appreciate your help.
<ORDER_PAYMENTS>
<ORDER_PAYMENT>
<ORDER_NO>20000404</ORDER_NO>
<PAYMENT_METHOD_ID>5</PAYMENT_METHOD_ID>
<PAYMENT_SEQ_NO>0</PAYMENT_SEQ_NO>
<CHARGE_AMOUNT>50</CHARGE_AMOUNT>
<CHARGE_CURRENCY>USD</CHARGE_CURRENCY>
<ORDER_PAYMENT_DETAILS>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>2</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>test1</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>1</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>CC</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>3</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>4222222222222</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>4</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>01</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>5</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>2012</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>10</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>AP53-7457490</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>11</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>ID575754W34623525SDT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>12</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>KEY111222333444555FSDRT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>2</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>test2</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>1</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>CC</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>3</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>4444444444444448</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>4</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>02</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>5</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>2013</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>10</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>AP53-7457490</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>11</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>ID575754W34623525SDT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>12</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>KEY111222333444555FSDRT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
</ORDER_PAYMENT_DETAILS>
</ORDER_PAYMENT>
<ORDER_PAYMENT>
<ORDER_NO>20000404</ORDER_NO>
<PAYMENT_METHOD_ID>1</PAYMENT_METHOD_ID>
<PAYMENT_SEQ_NO>1</PAYMENT_SEQ_NO>
<CHARGE_AMOUNT>10.47</CHARGE_AMOUNT>
<CHARGE_CURRENCY>USD</CHARGE_CURRENCY>
<ORDER_PAYMENT_DETAILS>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>2</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>test1</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>1</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>CC</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>3</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>4222222222222</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>4</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>01</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>5</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>2012</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>10</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>AP53-7457490</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>11</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>ID575754W34623525SDT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>12</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>KEY111222333444555FSDRT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>2</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>test2</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>1</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>CC</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>3</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>4444444444444448</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>4</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>02</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>5</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>2013</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>10</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>AP53-7457490</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>11</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>ID575754W34623525SDT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
<ORDER_PAYMENT_DETAIL>
<ATTRIBUTE_ID>12</ATTRIBUTE_ID>
<ATTRIBUTE_VALUE>KEY111222333444555FSDRT</ATTRIBUTE_VALUE>
</ORDER_PAYMENT_DETAIL>
</ORDER_PAYMENT_DETAILS>
</ORDER_PAYMENT>
</ORDER_PAYMENTS>

Do you mean the full xml excluding all the ORDER_PAYMENT_DETAIL elements but the first?
SQL> select deletexml(colx,'//ORDER_PAYMENT_DETAIL[position()>1]').extract('/*')
2 from tabx;
DELETEXML(X,'//ORDER_PAYMENT_DETAIL[POSITION()>1]').EXTRACT('/*')
<ORDER_PAYMENTS>
<ORDER_PAYMENT>
    <ORDER_NO>20000404</ORDER_NO>
    <PAYMENT_METHOD_ID>5</PAYMENT_METHOD_ID>
    <PAYMENT_SEQ_NO>0</PAYMENT_SEQ_NO>
    <CHARGE_AMOUNT>50</CHARGE_AMOUNT>
    <CHARGE_CURRENCY>USD</CHARGE_CURRENCY>
    <ORDER_PAYMENT_DETAILS>
      <ORDER_PAYMENT_DETAIL>
        <ATTRIBUTE_ID>2</ATTRIBUTE_ID>
        <ATTRIBUTE_VALUE>test1</ATTRIBUTE_VALUE>
      </ORDER_PAYMENT_DETAIL>
    </ORDER_PAYMENT_DETAILS>
</ORDER_PAYMENT>
<ORDER_PAYMENT>
    <ORDER_NO>20000404</ORDER_NO>
    <PAYMENT_METHOD_ID>1</PAYMENT_METHOD_ID>
    <PAYMENT_SEQ_NO>1</PAYMENT_SEQ_NO>
    <CHARGE_AMOUNT>10.47</CHARGE_AMOUNT>
    <CHARGE_CURRENCY>USD</CHARGE_CURRENCY>
    <ORDER_PAYMENT_DETAILS>
      <ORDER_PAYMENT_DETAIL>
        <ATTRIBUTE_ID>2</ATTRIBUTE_ID>
        <ATTRIBUTE_VALUE>test1</ATTRIBUTE_VALUE>
      </ORDER_PAYMENT_DETAIL>
    </ORDER_PAYMENT_DETAILS>
</ORDER_PAYMENT>
</ORDER_PAYMENTS>Note that the ".extract('/*')" is there only for formatting...
Max
http://oracleitalia.wordpress.com

I am trying to access my iTunes on a second computer, which apparently requires iCloud. After downloading iCloud, I get an error message that says my iTunes ID is correct but that it will not work for iCloud. Help!

When I try to access my iTunes from my second computer, I'm told I need to download iCloud. I did that, and when I sign in to iCloud, and enter my iTunes ID and password as directed, I receive a message saying that it is my correct iTunes ID, but that it is not the ID for iCloud. What do I need to do to access my music from iTunes on my second computer?

Click here and follow the instructions.
(98818)

Hi, is this the right product for enabling flash contents? I need support for my Harvard e-learnings pls. After downloading Presenter, I get an error message 'Not a valid presenter' when I add the Harvard url. Need help.

Hi
Is there anothe product for enabling flash content.

Pallavi,
Adobe Presenter is a plug-in application to MS PowerPoint that allows you to add video, audio, Flash and quiz content in to a presentation and then author it out as a Flash based presentation that can the be delivered to others via the web. You are asking about enabling Flash content. In what browser/application are you needing to enable Flash Content?
The 'Not a valid presenter' message is most likely due to you not have the rights to author content to Harvard's e-learning system, but without knowing if the URL is for a Connect account or some other e-learning platform, it's hard to give any useful insight.

Error in multi mapping bpm

Hi all,
In bpm, i have used a multi mapping transformation. And I get a error message that ' Cannot produce target element, check whether the source instance is valid' . And my two source messages are valid.
But in message mapping, i have given src1 and src2 as source messages in the same order.
But in the Messages_IN tab of bpm, the order of messages is reversed and it is src2 and src1. Can this be the reason for my mapping error? If so, how to rectify this.
If this is not the case, any more suggestions?

Hi Aarthi,
Check your occurence of Target strucuture migth be 1 to 1 or 1 to Unbounded.U r message mapping doesn't populates the data for u r target strucutre.Test u r mapping by giving the valid data( Which data is pass of mapping validations).
In your mapping go to messages tab and check the sequence of your message types are correct or not.If not choose Message types once in correct sequence.
Cheers
Veera
>>> Reward Points,If it is needful.

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

IDoc Package to File using Multi Mapping urjent

Hi Experts,
I have a scenario where PI 7.1 need to receive IDocs in a package and should send three files to target system. I am using multi mapping concept here, where i have created one message mapping, one operation mapping with three interfaces specified in it. I am getting the error "Inbound interface found several times (for same sender and receiver) for the outbound interface" .

Hi,
Please make occurence of the message type in message mapping as 0..unbounded.
Also in operation mapping the occurence of inbound interface as 0..unbounded.
Also now in configuration-->interface determination... access the new operation mapping.... u will c the occurence as 0..unbounded. Refresh the cache ad execute it once more...
Let us know the result...
Babu
Edited by: hlbabu123 on Apr 3, 2010 1:16 PM

Multi mapping after container append operation gets only first message

Similar Messages

Maybe you are looking for