Multi mapping in proxy

Hi all,
I am Trying to do file to RFC Scenario where i have to post multiple invoices in a single bapi. I am using proxy in my scenario In such case can i do multi mapping and post the data to R/3 could you please suggest.
Thanks in advance,
Kalam.

I am using proxy in my scenario In such case can i do multi mapping and post the data to R/3
You have to use BPM for this because ABAP proxy uses the abap stack and multimapping without BPM requires java stack.
Regards,
Prateek

Similar Messages

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Issue with java mapping in a multi-mapping scenario

Hi
    We have a 1:n multiple mapping scenario in XI and the source is R3 proxy and target side is files. So, creating multiple file from a single message from R3 .
R3 --> XI --> Multiple files
Structure of the output of the multi-mapping is
- <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
- <ns0:Message1>
<Transaction>
</Transaction>
<Transaction>
</Transaction></ns0:Message1>
</ns0:Messages>
wherein each Transaction node represents a file.
Now, we need to introduce a constant /string like
<!DOCTYPE Transaction PUBLIC \"-//XXXXXX//DTD BatchReceiptAuthorization//EN\" \"http://dtd.XXXXXXX.com/dtds/ReceiptAuthorization.dtd\">
on each of the files at the very beginning - i.e within each transaction node , in the above structure, we need the above DTD string to be written. To do this, we added a java mapping as the second mapping after the message mapping that creates this string. Is this the right approach and would it produce what we are expecting ?
import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.DynamicConfiguration;
import com.sap.aii.mapping.api.AbstractTrace;
public class ModifyRootAndDelay implements StreamTransformation {
     AbstractTrace myTrace;
public void execute(InputStream input, OutputStream output) throws StreamTransformationException {
          try{
               BufferedReader reader = new BufferedReader(new InputStreamReader(input));
               String NameSpacePrefix = "<!DOCTYPE Transaction PUBLIC \"-//innotrac//DTD BatchReceiptAuthorization//EN\" \"http://dtd.innotrac.com/dtds/ReceiptAuthorization.dtd\">";
               String sLine = null;
               StringBuffer XmlMsg= new StringBuffer();
               String Result,PayloadBody;
               int indexOfFirst;
               while ((sLine = reader.readLine()) != null) {
                    XmlMsg.append(sLine);
               String StartingTag = XmlMsg.toString();
               indexOfFirst = StartingTag.indexOf("<MerchantID>") ;
               PayloadBody=new String(XmlMsg.substring(indexOfFirst));
               Result=NameSpacePrefix.concat(PayloadBody);
               output.write(Result.getBytes());
          /*     Thread.sleep(200000); */
          }catch(Exception e){
               myTrace.addWarning("Exception raised in the JavaMapping:modifyNamespace.java""\n The Exception Message: " e.getMessage());
               throw new RuntimeException(e.getMessage()) ;
        }     public void setParameter(Map param) {
          myTrace = (AbstractTrace) param
                    .get(StreamTransformationConstants.MAPPING_TRACE);

Hi XI Gurus
                   In my scenario, I sent the inputstream that is being passed to the Java execute method - to trace and I see that the whole of the xml file - as shown below - which is the output of message mapping ( from the first mapping step ) in sent to the execute method of the java mapping a single call
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<Transaction> </Transaction>
<Transaction> </Transaction>
</ns0:Message1>
<ns0:Messages>
So, I modified Java mapping program to look for multiple occurences of <Transaction> tag and prefix them with my constant DTD Literal - which is the primary reason , why I had to use Java mappings after the message mapping.
Now, I get an error is XI- SXMB_MONI
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING" />
<SAP:P1>unexpected symbol; expected '<', '</', entity refe</SAP:P1>
<SAP:P2>rence, character data, CDATA section, processing i</SAP:P2>
<SAP:P3>0</SAP:P3>
<SAP:P4>113</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The exception occurred (program: CL_XMS_MAIN===================CP, include CL_XMS_MAIN===================CM00A, line: 609)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Should I create multiple outputs - as many as the numberof target split files ( of type outputstream ) from the execute method in the java program ?

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Multi-Mapping and Dynamic Configuration

Hello,
Is it possible to use dynamic configuration in mulltip-mapping? (message split?)
in a proxy-mail scenario I am using a multi-mapping. The message gets splited by a specif field.
(Field of source message-SplitByValue(Value Change)-CollapseCOntext->Target Message(1..N)
WIthin the graphical mapping I have a dynamic configuration for the "Mail Subject"
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keySubj = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/Mail", "THeaderSUBJECT");
conf.put(keySubj, pSubject);
return pSubject ;
I have mapped this field to a field in the target message.
The messages are being splitted as expected and the value of pSubject is also correct.
BUT when receiving emails the subject field has the same value for all splitted messages.
My Question is "conf.put(keySubj, pSubject);" overwitting all splitted outgoing messages?
Thanks for the Help
EMW

As stated in http://help.sap.com/saphelp_nw70/helpdata/EN/43/09b16006526e72e10000000a422035/frameset.htm
Adapter-Specific Attributes and Multi-Mappings
In multi-mappings, there are multiple message headers with adapter-specific attributes. The mapping API can only access one message header. This has the following consequences depending on whether there are multiple source or target messages:
●     1:n Transformation
If there are multiple target messages, the header for the adapter-specific attributes is copied for each message. This means that you can only create one header for all adapter-specific attributes, and not individual headers.
●     n:1 Transformation
This variant is only possible for multi-mappings in integration processes. If there is more than one source message, read-access to the adapter-specific attributes of the various message headers is not possible at runtime.
●     m:n Transformation
All afore-mentioned restrictions apply here. Developers can at most write the same adapter-specific attributes for all target messages to the header, without read-access to the attributes of the source messages. m:n transformations are only supported within integration processes.
Regards,
Henrique.

Multi-mapping....2nd mapping not executing

Hi all..
I am doing Proxy to file scenario....
I am using multi-mapping in this..
one source..... 2 targets
i am triggering the taregt based on a field value( using equalsS and IF)
if i am testing it with single value then the mapping is success and fileds are bieng filled properlyy..
but if i duplicate the subtree on source and put 2 conditions at a time...only first condition is executing and 2nd node is kept blank...
i searched in SDn but no luck till now...
plz help me out to solve this...
Thanx in advance...

thnax for the replies....
i tried with SplitBy value but no use,....
The structure...
source:                                Target 1:
Root                                    Total_Males:
Name                                    Name
Adress                                   City
City
Target2:
Total_females:
   Name
   Adress
   City
i am checking condition for "***' if it is male it will trigger first target1 .....female for target2.
it is working with either male or female fine..
but if i duplicate it and enter both male or female....only one condition i.e first i.e male is only triggering and 2nd is left blank..
regards,

Multi mapping issue

Hi ,
I am using a multi mapping(with out bpm) in my scenario. One source structure is mapped to 3 different targets and these 3 different targets are using 3 different adapters.
There will be a indicator from the source structure which descriminates all the 3 targets.
How can I restrict the XI to send only to one target based on indicator in the source structure?
EX: If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
So my problem arises where in, because we are using multimapping 1:n, if I trigger a message in the proxy it will be sending to all the 3 targets. I don't want this.
Appreciate your help on this.
Thanks
bpr

HI
You need to have 3 different channels for 3 receivers with receiver agreement for all three.
Go to Receiver determination and under configured receivers you can specify condition you want.
If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
select the left operand as indicator field from source type
= as Op
right side is 1000
Against this configure the receiver you want to send data.
Thanks
Gaurav

BPM Multi Mapping to diffrend receivers

Hello All,
i have to deploy an bpm process with 1:N mapping and different receivers
i have an receive step an transformation step for the mapping and
two send steps each in an block to send single messages to the receivers.
my problem is:
say the input Message has 4 Subtrees so after the Mapping i have 4 Messages for receiver1 and 4 Messages for receiver2
BMP send all 4 Messages to receiver1 and then all 4 messages to receiver2
but i want to send message1 tor receiver1 , then message 1 to receiver2
so that the pattern is like this:
MSG1Rec1, MSG1Rec2
MSG2Rec1, MSG2Rec2
MSG3Rec1, MSG3Rec2
is this possible with bpm.
Multi Mapping without bpm is not possible
regards ralf

Hi Marshal
receiver is abap proxy and not adapter engine
operation mapping is like this
source_operation1   => target_Operation1   0..unboundet
                                 => target_Operation2   0..unboundet
in message mapping
source_Message1    => target_Message1 0.. unbound
                                  => target_Message2 0..unbound
all work fine but in bpm i need two blocks pareach to send the messages to target.
and bpm will work first block1 and then block 2
i need a block for both sender steps but ???

Multi mapping - solution ??

HI
This is regarding a typical scenario where SAP XI 3.0 receives data through an outbound ABAP proxy , the output of these have to be files ...but the problem is :
a) There will be around 15 files - 5 of type .txt , 5 of type .CSV and 5 of .RTF all to placed on a single location , how to achieve this ? design wise . ..
b) all the files will have different formats i.e all txt files will be of a different format but the source data will be the same ,which means from the same incoming Xl different files need to be formed , We dont want to use BPM ...
does it mean we need 15 differenct Communication channels ??
and do we require 15 different mapping also ??
Kindly suggest if it can be done through multi mapping , i am unsure how
thanks
Dev

Hi,
>>a) These 15 files are of different out put formats( as in the 5 csv files have different layouts and so does the 5 txt files ) , so does it essentially mean 15 different mappings and 15 different file communication channels ?
No need of 15 mappings, one multimapping will do.. where from one source message type you are creating 15 target message type....
>>b) Enhance interface determination basically helps me in creating (n)Target interfaces from 1 source message, right ?
but then when i have 15 different mappings ... how does multi mapping help ? isnt itas good as 15 different interaces ??
i think you are confused.. do like this
1. Create a message mapping
2. Go to the signature tab and add one source message type and 15 target message type..
3. Come to definition tab and complete the mapping
4. You can see that lot of Message, Message0 etc are created, these help in doing multimapping and this is multimapping
1. Create interface mapping
2. Go to the signature tab and add one source message interface and 15 target message interface..
3. Do read interface and select the mapping done in above step
1. Create interface determination.
2. Provide the interface mapping created above there
3. Create 15 communication channel and 15 receiver agreement
Regards
Suraj

Multi Mapping

Hi all,
I need a help on how to go about the following scenerio.
XI first performs a multi-mapping that creates two output messages:
One is the target message in Flat File Format. The mapping also generates the filename for the output message which should follow the format 11_<Unique ID>.txt. This filename is written into the XML Payload of the message. The File Adapter later does a flat file conversion on the message. In this step, the filename is not written into the flat file. Instead, it is used by the file adapter as the target filename.
The file should be placed in a specified directory.
The mapping also creates a second message, which only contains the same filename in the payload. This message goes to a second File Adapter, which also does a flat file conversion. Its output only contains the filename that was created by the mapping, followed by a line break. The output of this File Adapter is written into the same directory as the first file. The name of the output file is 11.catlg. If the file already exists in the target directory, the output needs to be appended to this file.
Thankyou.

Shruthi,
It seems the payload contains the filename and this filename as to be used in the Communication Channel of file adapter.If my understanding is correct the problem can be solved by the Variable substitution. Refer the below link:[http://****************/Tutorials/XI/Variable/substitution.htm]
Regards,
Kiran Bobbala

Multi Mapping error

Hi,
I am required to have a IP recieve 3 IDOC types triggered from BD10 . It can trigger 3 or more IDOCs. For Eg.
1 ARTMAS (only 1) , 2 INFRECs and 1 LIKOND.
If anyone IDOC has come then after a waiting period of 1 minute it should come out of FORK.
My IP is like this.
In a FORK there are 4 branches.
1) ARTMAS receiver
2) Loop(infinite) with INFREC Receiver and a Container Operation to collect all IDOCs
3) Loop(infinite) with LIKOND Receiver and a Container Operation to collect all IDOCs
4) A wait Step with a container operation to initialize endtime variable
necesary branches: 4
The Fork Comes out when the end condition is met ie the End variable is Set or if all the IDOCS have come.
Corelation on MATNR.
Next I have the transormation and send step.
In the MM i have 3 Source and 1 Target.
Artmas 0-1 occurance
INFREC 0 - unbounded
LINKND 0-unbounded
I have created the Target with External Definition and have set the correct occurance in the XSD file
I have mapped the neceessary Segments from INFREC and LIKOND and all the Segments of ARTMAS to the Target structure.
In SXMBMONI it says error on Outbound side and
I see Mapping Exception when I seen in WORKFLOW.
Is my design Correct?
I have tested the Interface & Message Mapping they are correct
Request your help.
John Rajesh
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping-Namespace:http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO</Trace>
<Trace level="1" type="T">Mapping-Name:IM_ARTMAS04_TO_ZARTMAS04_PUB01</Trace>
<Trace level="1" type="T">Mapping-SWCV:00000000000000000000000000000000</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.</Trace>
<Trace level="3" type="T">Load b8f12d30-2c45-11da-90af-ef160a892024, http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1, com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class (http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1) in swcv b8f12d30-2c45-11da-90af-ef160a892024.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns4:Messages/ns4:Message1/ZARTMAS04_PUB/IDOC. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:292) at

Check the following
1. Have u mapped the root level element?
2. Inside interface mapping, when u say read interface, is it diplaying both the interface.
Also check ur input
may be u r not providing proper input
Regards,
Prateek

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
<i>CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only</i>
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Multi-mapping for ibound IDOC

Hi! All
It would be of great help if you provide your suggestions on:
Mapping one XML source file to 6 IDOC receivers, 2 of them are of the same type and 4 are distinct idoc types.
I tried multi-mapping and received the following error:
"Messages in multi-message format can only be sent to one Adapter Engine"
Looks like IDOC adapter does not support multi mapping...
Can you please suggest any other option apart from using BPM(since it consumes lot of resources).
Thanks a lot!!
Regards,
Patrick

Hey
its not possible to do Multimapping over IDOC's without BPM.
other way around can be to do a single -single scenario,suppose u have 6 IDOC's to post then u need to design 6 different scenarios for them.
without BPM you cant do multimapping for IDOC or HTTP
Thanx
Aamir
Message was edited by:
Aamir Suhail

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Multi mapping in proxy

Similar Messages

Maybe you are looking for