Multi mapping problem

Hi All,
I tried a simple BPM with a transformation step involved. I have done a multi mapping here. One source msg to 2 target msgs.When I test the mapping using test tab with the incoming payload from SXMB_MONI, I am getting 2 msgs as expected. But during runtime, this is not happening.
These are the output msgs I am getting. It does not have any node in it. The second msg doesnot even have a closing tag for namespace.
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_TGT xmlns:ns="urn:bpm:file:2rec">
<Header />
</ns:MT_TGT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_RECR xmlns:ns="urn:bpm:file:2rec" />
Any pointers on this issue.
Thanks & Regards,
Jai Shankar.

Hi Bhavesh,
Yes. I checked the source msg in BPM container element. I tested the mapping with thet payload. It is working fine. I can see the source payload in container element as expected. But the MESSAGES_OUT has 2 msgs in the format I pasted above.
Thanks & Regards,
Jai Shankar.

Similar Messages

Problem with multi-mapping

Hello everybody,
we got a problem with multi-mapping.
Source and target message-type are the same:
<xsd:element name="MY_MESSAGE_TYPE">
_<xsd:element name="BUSTRANS">
__<xsd:element name="CHILD_1" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
__<xsd:element name="CHILD_2" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
The requirements are:
<xsd:element name="MY_MESSAGE_TYPE"> should be created as often as <xsd:element name="CHILD_2"..> occurs
a) so we mapped
CHILD_2 -> MY_MESSAGE_TYPE
BUSTRANS -> CopyValue -> BUSTRANS
CHILD_1 -> CopyValue -> CHILD_1
SUB_CHILD_1 -> CopyValue -> SUB_CHILD_1
SUB_CHILD_1_NAME -> CopyValue -> SUB_CHILD_1_NAME
CHILD_2 -> splitByValue(eachValue) -> CHILD_2
The problem is:
If we duplicated
a) SUB_CHILD_1
b) subtree CHILD_2 (so 2 messages will be generated)
for testing, SUB_CHILD_1 only occurs 1 time! But we need it in every target message as often as it occurs in the source message.
For your testing, here is the datatype:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://enbw.com/XI/SAPCRMB2B/javamappings_test" targetNamespace="http://mynamespace.com/XI/SAPCRMB2B/javamappings_test">
<xsd:complexType name="MultipleBookingOrderRequest">
<xsd:sequence>
<xsd:element name="BUSTRANS">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="CHILD_1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 <xsd:element name="CHILD_2" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Regards
Dominic

Mario,
multimapping (split IDOC into several IDocs) is possible with IDocs. We did it!
Did you use IDOC packaging for this?
AFAIK,when you use multimapping that involves different adapters including one J2EE adapter and a IDOC adapter in the inbound side, multi mapping does not work.
Regards,
Bhavesh

Multi Mapping

Hi all,
I need a help on how to go about the following scenerio.
XI first performs a multi-mapping that creates two output messages:
One is the target message in Flat File Format. The mapping also generates the filename for the output message which should follow the format 11_<Unique ID>.txt. This filename is written into the XML Payload of the message. The File Adapter later does a flat file conversion on the message. In this step, the filename is not written into the flat file. Instead, it is used by the file adapter as the target filename.
The file should be placed in a specified directory.
The mapping also creates a second message, which only contains the same filename in the payload. This message goes to a second File Adapter, which also does a flat file conversion. Its output only contains the filename that was created by the mapping, followed by a line break. The output of this File Adapter is written into the same directory as the first file. The name of the output file is 11.catlg. If the file already exists in the target directory, the output needs to be appended to this file.
Thankyou.

Shruthi,
It seems the payload contains the filename and this filename as to be used in the Communication Channel of file adapter.If my understanding is correct the problem can be solved by the Variable substitution. Refer the below link:[http://****************/Tutorials/XI/Variable/substitution.htm]
Regards,
Kiran Bobbala

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi-Mapping Error in PI 7.1 - External Definitions

Hi all,
We have just upgraded to PI 7.1 from 7.0 and run into an issue with message multi-mappings, just wondered if anyone else had met the same issue and worked it out...
When creating a message mapping, we are using as the target an external definition which is defined by an XSD generated by a third party tool (Seeburger).
When I map 1:1 (1 source message to one target message) in the message mapper, all is fine but if I try to create a multi mapping, I get an error. The process is:
a) I have a message mapping with one target message, defined as an External Definition.
b) I then go to Signature tab and add a second target message as an External Definition
c) Click back to Definition tab
d) Get the error "Object XXXXX | YYYYY not found" - where XXXXX is the external def name and YYYYY is the namespace (the SWCV namespace that is, not the XML namespace)
This only seems to happen with External Definitions which are autogenerated and I strongly suspect that is has to do with the fact that the tool that generates them always does so without an XML namespace. I have not proved this though (other Ext Defs with namespaces work for multi-mappings but that is not the only difference so I can't be sure that is the issue but have a strong hunch. This problem did not occur in 7.0.
Anyone got any ideas?
Thanks,
Chris

Hi,
This would not be of much help but, I was able to encounter this issue in XI 3.0.
What we did was to manually edit the XSD and add a namespace to it. I'm not sure if PI 7.1 is able to handle mutiple namespaces, so we limited it to this value <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified"> and made sure that this value is used for all the External Definitions used in the multi-mapping.
Regards,

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
 Message1
 MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Exception Handling for Multi Mapping in bpm

Hello,
does anybody know a way of catching an error occured in a multi-mapping used in an integration process.
It seems to me, that when i am using a multi-mapping in an integration process and an error occurs, the message cannot get back to the integration process. In smq2 I can see, that there is the following error:
CX_MERGE_SPLIT
Regards
Günther

The transformation-step is in an block with an exception branch and it is well configured.
When I use a 1 to 1 mapping and an error in the mapping occurs, all is correct. The integration process jumps in to the exception branch and finishes correct. But when use a multi mapping (1 to n; n to 1; n to m) and an error in the mapping occurs, then there is always an error in the bpe inbound queue.
There must be some problem with the split-and-merge program. I think that the split-and-merge program handles the merging of n messages into 1. You can see this when you test a mapping in the integration builder designer. In a multi-mapping there you can see a xml-structure that envelopes the application messages, f. ex.:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <myMessage1>data</myMessage1>
 </ns0:Message1>
 <ns0:Message2>
 <myMessage2>data2</myMessage2>
 </ns0:Message2>
</ns0:Messages>

Split Message value in Multi-Mapping

Hello everybody,
I got the following problem with 1:n Mapping
My Source Structure is
<root>
.<element_list> // 1:1
..<element> // 1:unbounded
...<value>
...</value>
..</element>
.</element_list>
</root>
Sample for source structure:
<root>
.<element_list>
..<element>
...<value>WILLIAM
...</value>
..</element>
..<element>
...<value>RICHARD
...</value>
.</element_list>
</root>
I want to split by multi-mapping!
The target structure looks similar as source target structure (just <element_list> is missing)!
So my structure looks in target:
<Messages>
.<Messages1>
..<element>
...<value>
...</value>
..</element>
.<Messages2>
..<element>
...<value>
...</value>
..</element>
For splitting the <value> tag is responsible:
Every RICHARD should be mapped to <Messages1>
Every WILLIAM should be mapped to <Messages2>
--> so I use the if-function (I dont want to use the SORT function!)
But this seems not to work.
Any suggestions?
Regards Mario
null

Hi Vijaya
annotation:
I need different messages!
So in the tab >messages< of massage mapping
Target Message: The message type must occur in row 1 & 2
Like in thread: /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Here: First screen shot under >Message Mapping<
Did you do this?
Regards Mario
Message was edited by:
 Mario Müller

Multi mapping issue

Hi ,
I am using a multi mapping(with out bpm) in my scenario. One source structure is mapped to 3 different targets and these 3 different targets are using 3 different adapters.
There will be a indicator from the source structure which descriminates all the 3 targets.
How can I restrict the XI to send only to one target based on indicator in the source structure?
EX: If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
So my problem arises where in, because we are using multimapping 1:n, if I trigger a message in the proxy it will be sending to all the 3 targets. I don't want this.
Appreciate your help on this.
Thanks
bpr

HI
You need to have 3 different channels for 3 receivers with receiver agreement for all three.
Go to Receiver determination and under configured receivers you can specify condition you want.
If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
select the left operand as indicator field from source type
= as Op
right side is 1000
Against this configure the receiver you want to send data.
Thanks
Gaurav

Multi Mapping using JAVA Mapping 1:n Transformation--Urgent??

Hi,
I have to make a 1:n Mapping with the JAVA Mapping. The situation is as follows:
I have 1 ORDER with n positions and I have to convert this order to n ORDERS with 1 position in each order. My problem is, that I have to use the header-data of the input-order for each of the output orders and I have to use the first position of the input-order for the frist output-order the second postition for the second order and so on. Which mapping-steps do I have to use. I think this is an ordnary problem, but I could not find anything in the XI-help about this. Maybe anyon has got an idea.
Regards,
Raj

hi
The output from java mapping must look like
<Messages>
<Message1>
<Your Traget Order>....
</Message1>
<Your Traget Order>....
</Message1>
</Messages>
Create a Graphical mapping sample (1:N) to get an idea about this structure.
refer this also
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
rgds,
Arun

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

BPM multi-mapping

Hi guys,
I'm doing a multi-mapping in a BPM (I need the BPM for other validations). This multi-mapping is 1x2 and the messages are created based on payload fields(both are optional 0..1). the mapping is working fine, the problem is at the fork step, I've two send steps and whenever the message1 or 2 doesn't have occurences, I got an error that stops my BPM. But this is not an error as the messages are optional and don't need to occurs everytime.
Anyone know how to solve this?
Thanks in advance & regards,
Ricardo.

Hi Patreek,
Necessary branches = 1.
I already did it. It works if only one message is generated (message1 or message2). If both messages are generated I get no error at the BPM, but only one message arrives ERP and when I check at BPE moni one of the send steps is logical finished.
Any idea? maybe I'm missing something...
Regards,
Ricardo.

BPM Multi Mapping to diffrend receivers

Hello All,
i have to deploy an bpm process with 1:N mapping and different receivers
i have an receive step an transformation step for the mapping and
two send steps each in an block to send single messages to the receivers.
my problem is:
say the input Message has 4 Subtrees so after the Mapping i have 4 Messages for receiver1 and 4 Messages for receiver2
BMP send all 4 Messages to receiver1 and then all 4 messages to receiver2
but i want to send message1 tor receiver1 , then message 1 to receiver2
so that the pattern is like this:
MSG1Rec1, MSG1Rec2
MSG2Rec1, MSG2Rec2
MSG3Rec1, MSG3Rec2
is this possible with bpm.
Multi Mapping without bpm is not possible
regards ralf

Hi Marshal
receiver is abap proxy and not adapter engine
operation mapping is like this
source_operation1   => target_Operation1   0..unboundet
                                 => target_Operation2   0..unboundet
in message mapping
source_Message1    => target_Message1 0.. unbound
                                  => target_Message2 0..unbound
all work fine but in bpm i need two blocks pareach to send the messages to target.
and bpm will work first block1 and then block 2
i need a block for both sender steps but ???

Multi mapping problem

Similar Messages

Maybe you are looking for