Multi node patching

Hi,
I've following configuration.
DB =DB1
APPS = APPS1 & APPS2
I WANT TO PATCH apps1 and apps2 servers.
If I apply patch 9281404 on apps1 I need to apply same on apps2. Suppose patch 9281404 applied first on apps1 and then apps2. What will happen during applying patch 9281404 on apps2 if patch 9281404 already altered table fnd_users during first node?
Thanks

Hi,
If I apply patch 9281404 on apps1 I need to apply same on apps2. Suppose patch 9281404 applied first on apps1 and then apps2. What will happen during applying patch 9281404 on apps2 if patch 9281404 already altered table fnd_users during first node?As mentioned above, the patch smart enough to handle this. Moreover, you will have to apply the patch on each application tier node unless you have shared application file system.
Regards,
Hussein

Similar Messages

  • MW 2.19 multi node upgrade patching fails on second, third, etc node.

    When using Maintenance Wizard 2.19 with multi-node configuration patching will fail after the first node with an error in the adpatch log that states invalid options as seen below.
    "AutoPatch warning:
    Ignoring unrecognized option: "options".
    Connecting to APPS......Connected successfully.
    AutoPatch error:
    You must be in Maintenance Mode to apply patches.
    You can use the AD Administration Utility to set Maintenance Mode."
    Please update this forum if you hit this issue and I can send you the fix until Maintenance Wizard 2.20 is released.
    Thanks

    As requested here's a paste of the command log, I can just see entries for the admin node and not the forms/web node.
    Many Thanks
    INFO - Help on monitoring when multiple drivers and nodes are applied.
    If the web window times out, click on the x and rerun it to view the updated log
    file. It will change as the patch continues to run in background. Just keep marking it
    success until it is complete or check the active patch node manually:
    $ tail -f $APPL_TOP/admin/${TWO_TASK}/log/patches_PRE_1703_1_patchit11i*.log
    Each node, if multi-node, will be determined and the patch drivers will be applied
    on the right nodes in the right order. Look for the ACTION: statement.
    ACTION: execute on node: apps , patch=patches_PRE_1703_1 driver=u_merged.drv
    patchit11i.sh REMOTE SIZE: 47535 LOCAL SIZE: 47535
    OK - no update needed for patchit11i.sh, same size as on EOF: 47535 bytes.
    Found release REL=11.5.10.2 from fnd_product_groups.
    Starting adpatch for: patch=patches_PRE_1703_1 force= driver=u_merged.drv
    Using defaults file /u10/orafun/appl/admin/FUN/adalldefaults.txt.
    Starting patch with the following command:
    /u10/orafun/appl/ad/11.5.0/bin/adpatch defaultsfile=/u10/orafun/appl/admin/FUN/adalldefaults.txt logfile=patches_PRE_1703_1_patchit11i.log patchtop=/u10/orafun/appl/patch/patches_PRE_1703_1 driver=u_merged.drv workers=6 interactive=no options=hotpatch,novalidate,nocompilejsp,nocompiledb,nomaintainmrc,nogenerateportion restart=n
    Confirms adpatch is not still active, and views Check patch log times.
    ... PROCESS LISTING of adpatch
    ... ls -l of patches_PRE_1703_1_patchit11i.log to see date/time stamp
    -rw-r--r-- 1 orafun dba 53761 Aug 30 14:41 /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
    ... last 20 lines of log file: /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
    for details.
    Purging timing information for prior sessions.
    sqlplus -s APPS/***** @/u10/orafun/appl/ad/11.5.0/admin/sql/adtpurge.sql 10 1000
    Done purging timing information for prior sessions.
    AutoPatch is complete.
    AutoPatch may have written informational messages to the file
    /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.lgi
    Errors and warnings are listed in the log file
    /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
    and in other log files in the same directory.
    SUMMARY - patchit11i.sh - Completed application of patch: patches_PRE_1703_1, driver: driver=u_merged.drv
    OK - adpatch completed successful.
    INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
    Redo the Action
    Completed Successfully Post Hour Minute

  • Has anyone installed XMLP in a multi-node appsTiers  environment?

    We are experiencing a problem with installing XMLP 4.5.
    Our EBS 11i(11.5.9) configuration: dbTier is on HP-UX, admin/CM of appsTier is on HP-UX and web/forms of appsTier is on Windows, i.e two nodes appsTier.
    Applying the major patch 3554613 (XMLP 4.5) created $APPL_TOP/xdo/11.5.0 on both UNIX and Windows nodes. But the $JAVA_TOP/oracle/apps/xdo is only created on UNIX node.
    When we reported the problem of XMLP in relation to OA Framework (see my other posting on this forum) to Oracle, the support engineer said the patch should create %JAVA_TOP%\oracle\apps\xdo on Windows too. But he is not sure as he only has a single node environment.
    We tried a couple of times of reapplying the patch without any luck.
    We start wondering if the XMLP 4.5 can be successfully installed in a multi-node appsTiers environment.
    So my question is:
    Has anyone successfully installed XMLP in a multi-node appsTiers environment?
    Thanks.

    Hi
    XMLP is installed on the apps middle tier so it should be no problem. The only thing, once you have it installed is if you want to use our cfg file you'll need to have the cfg file installed on all nodes.
    Whats the TAR number ?
    Tim

  • EBS R12 multi node architecuture upgrade

    Hi,
    Could any one let me know the approach for 2 node rac and 2 node application upgrade. I am clear about the database upgrade, but could any one let me know, do I need to upgrade r12 as a single node and then copy the upgraded binaries to second node and run autoconfig? It will be help full if someone shares the document to upgrade ebs on multinode architecture.

    Could any one let me know the approach for 2 node rac and 2 node application upgrade. I am clear about the database upgrade, but could any one let me know, do I need to upgrade r12 as a single node and then copy the upgraded binaries to second node and run autoconfig? It will be help full if someone shares the document to upgrade ebs on multinode architecture.You have to upgrade the multi-node installation the same way you upgrade a single node installation. You need to run Rapid Install and the main upgrade patch driver on each node (each node where APPL_TOP is presented).
    I do not think there is a document just for multi-node installation as it is similar to single node installation.
    Thanks,
    Hussein

  • 11.5.10  multi-node instalation

    Hi,
    I'm trying to install 11i on Oracle Linux in multi-node mode. I have two servers (fin-01 and fin-02) and decided to use fin-02 for DB and CM, fin-01 for the rest. Installation starts on fin-01. But System Check Status showed in 'Database Install Check', that "RW-40000: Warring: Unable to establish a Database connection. Please make sure the database is up before continuing with this install. Connection string used - jdbc: oracle:thin: @fin-02.domain:1521:VIS"
    Is that means, that I need to install DB before?
    regards,
    Krystian

    Hi;
    You need to start installation from db tier.Please see:
    multinode installation steps
    multinode patch
    Regard
    Helios

  • Question on multi-node R12 install

    I assume that for a Multi-node install of R12, we have to run rapidwiz on nodeA and choose "Install Oracle Application release 12.1.1" , choose the appropriate services for this node ex: "Batch Processing"
    then once the install is done, copy the config.txt file over to NodeB and run rapidwiz on nodeB and choose "Install Oracle Application release 12.1.1" , choose the appropriate services for this node ex: "Web, root and other services" ..
    This is not really clear in the R12 Rapid Install guide
    Can someone confirm
    Thanks

    Hi;
    Briefly you should follow those:
    1. Copy stage both server
    2. Create same mount point both server (let us say /u01)
    3. Create same folder on both server under /u01 (let us say /u01/PROD)
    4. Give 777 permission to stage and /u01/PROD folder
    5. Dont forget to both server entery to /etc/hosts on both server
    6. Start installation first db side
    7. While you are making multinode installation copy config.txt to apps server
    8. Start installation on apps server and give config.txt for instalaltion
    PS: Ofcourse create user :)
    Hope it helps
    Regard
    Helios

  • How to do data migration between single node and multi node HANA systems ?

    Data migration between single node and multi node HANA systems ?
    What are limitations ?
    What should be the best practices ?

    Data migration between single node and multi node HANA systems ?
    What are limitations ?
    What should be the best practices ?

  • How to run all Concurrent Requests in a single node in a multi node env

    DB;11.1.0.7
    Oracle Apps:12.1.1
    OS:Linux 86x64 Red Hat
    PCP setting is enabled.
    Load Balancer is enabled.
    APPLDCP=ON
    Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
    Thanks for your time!
    Regards,

    PCP setting is enabled.
    Load Balancer is enabled.
    APPLDCP=ON
    Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
    If you mean the database instance, then please see these docs.
    How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
    In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
    Thanks,
    Hussein

  • How to setup multi node installation

    Hi all,
    I have successfully installed Oracle E-Business Suite 11.5.10 in a single node.
    But, I would like to get some suggestions on How to perform the multinode installation in which all the application tier servers in independent nodes?
    If the nodes are placed in different places geographically, how can I move all these nodes in to a single network? Is this possible?
    Please guide me.
    Thanking in advance
    Rameshkumar

    1. Is it right if I assumed that we must check that
    box if we want to install apps tier in more than one
    server so that if we only want to install apps tier
    in only one server then we don't need to check that
    option? Or we better check it even no matter how many
    server we installed apps tier into? You only need to check that box if you intend to used a shared application tier filesystem for a multi-node installation. If you are only going to have one app tier server, you don't need to check the box. If you plan on multiple apps tiers, each with its own copy of the application tier file system, you also don't need to check that box.
    2. If I still uncheck that option will there be any
    problem such as in backup & restore, clone, testing
    activity, etc?No, should not be any problem at all.
    3. When we created user for each db tier and apps
    tier, what will be better, create the same user for
    both tiers or differentiate user for each db tier and
    apps tier? I'm thinking of using same user for both
    tiers to avoid privilege problem later on.
    I'd recommend the same user for application tier files on all nodes in the system, and a different user for database-tier files. For example, in our system the database software (RDBMS ORACLE_HOME) and database datafiles are owned by 'oracle', and the EBS application files (APPL_TOP, forms and web server, etc) are owned by a user called 'applprod' (though of course you should choose a user name that makes sense in your environment.
    4. Can we start clone process in db tier and apps tier >paralel in multinode environment or still start clone >process in db tier first then apps tier?Still need to do the db tier first, since 'adcfgclone.pl appsTier' will want to talk to a database. :-)
    Regards,
    John P.
    Message was edited by:
    jpiwowar (forgot to answer the 4th question the first time, whoops)

  • Clone multi-node RAC and ASM to single node

    Hi everyone.
    I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
    I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
    The eBS version is 11.5.10.2 and database version is 10.2.0.3
    Is possible this clone?
    Thanks very much.

    Hi User;
    Please follow below and see its helpful:
    EBS R12 with RAC and non-RAC
    Re: RAC to single instance ebs R12
    Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
    Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
    [b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
    Also check:
    http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
    Regard
    Helios

  • Oracle 10g multi node installation

    Hi,
    Multi node installation for Oracle 10g Appl Server
    - Node A: Install core business Database server.
    - Node B: Install Application Server Infrastructure (OID, repository database).
    - Node C: Install Application server middle tier (forms, reports, portal, discoverer, java) at node C. must specify the OID server (node B). And configurre tnsnames to access database server (node A).
    steps for this. Any doc or link
    Thanking you
    regards,

    As simple as you mentioned.
    1.- Install db in node A
    2.- Install Infra in node B, you will get a servername and port for OID (look on $OH/install/portlist.ini to get it), and the password, usually the same as for the System and Sys users for the repository.
    3.- Install Apps in node C, even if you install infra and apps in same node, the installer will always promp for the OID server name and port wich I mentioned earlier.
    4.- Configure node C tnsnames to access node A
    Hope this helps
    Greetings.

  • Migrating from single-node to multi-node (2 Node)

    Hi,
    We have decided to migrate our existing 11.5.9 application from single-node to 2 Node(multi-node). Please let me know what services should reside on each node (Recommended by Oracle).
    Forms, Reports, Apache on one node and CM, Admin, DB on another ?
    (or)
    DB on one node and all other on another node ?
    And please let me know the steps I should follow to achieve the task as well.
    Thank & Regards,
    Abdullah

    Hi;
    I suggest please review our previous posts and check notes:
    shared appltop/distributed appltop
    Re: two nodes
    In R12 shared appltop/distributed appltop
    shared appltop -Which node
    Re: shared appltop
    Shared appltop in R12
    Shared appltop in R12
    shared APPL TOP or shared application
    shared APPL TOP or shared application
    Regard
    Helios

  • Multi Node Redundant QR Server Configuration

    I have a multi server and multi node FAST ESP configuration setup. (2 columns)
    The goal being that should 1 server become unavailable, the other QR server can be configured (in the search application) to service the search requests.
    However, the problem i have is when i take the non admin server offline (shutdown) and use the QR server on the admin node, i get an error stating that "One or more nodes unavailable for search"
    Does anyone know where in the configuration this would be set?
    I've looked at what i believe to the be the obvious configurations (nodeConf,topfdispatcher,search-1) and they all point to their respective machine names.
    Any advice?
    Kevin Sperring

    Kevin,
    This is expected if one of the search node is down.
    If you want qrservers to provide results despite partial availability of nodes, you will need to enable allowpartialresults on the FAST Admin node:
    ($FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc) .If you don't have the parameter, please add it on this file (allowpartialresults =1 ) and restart the qrservers.
    If you want qrservers to shut down http sessions upon problems connecting to its local fdispatch (which partial is NOT a case of), you could add the httpdisable flag.
    Edit the file $FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc and change the value httpdisable=0 into httpdisable=1.

  • Financial Analyzer Web access after multi-node setup

    hey guys
    any idea on the follwoing
    Financial Analyzer Web access after multi-node setup
    any hints will be helpfull
    fadi

    Thank you Fadi for this quick idea.
    I will try to apply it in our environment.
    If we couldn't do it, I think that we have other two options; first options is to reinstall OFA in the Web Server Node where there is a Metalink note states how to move OFA from server to server. The second option is changing the configuration files of OFA to reference the Web Server in the new node.
    I will update you with the results.
    Regards,
    M.Muhtadi

  • Will the Application Scope be shared across the cluster in a multi-node OC4

    Hi,
    I have the following requirement:
    Users of the application can only have single (browser) session. When a user who already has a session connects again, he should no longer be allowed to access the older session.
    My proposed implementation is:
    -     After successful login – possibly using a Session Listener - an entry is made in a HashMap UserSessions that lives in the application scope. Key is the username, value is the session id (HttpSession.getId()).
    -     For every request, using a ServletFilter, we check whether the session is still in the UserSessions HashMap for the current user. If a new session has been created for the same user, the session id for that new session is in the UserSessions map and the servletfilter will not find the session. In that case, the filter should invalidate the session and forward to the user to an error page.
    However, the application will run on a multi-node OC4J cluster. I am starting to wonder:
    Will the Application Scope be shared across the cluster in a multi-node OC4J environment?
    I know session state can be shared. But what application state/scope?
    Does anyone know? Do I have to do anything special in the cluster or the application to get this to work?
    Thanks for your help.
    Lucas

    gday Lucas --
    Application scope is not replicated across JVM boundaries with OC4J.
    I'm sure this used to be described in the doc, but I can't find it now from a quick scan.
    If you wanted to use this type of pattern, you could look to use a Coherence cache as distribution mechanism to share objects across multiple JVMs/nodes.
    -steve-

Maybe you are looking for