Multi Node Redundant QR Server Configuration
I have a multi server and multi node FAST ESP configuration setup. (2 columns)
The goal being that should 1 server become unavailable, the other QR server can be configured (in the search application) to service the search requests.
However, the problem i have is when i take the non admin server offline (shutdown) and use the QR server on the admin node, i get an error stating that "One or more nodes unavailable for search"
Does anyone know where in the configuration this would be set?
I've looked at what i believe to the be the obvious configurations (nodeConf,topfdispatcher,search-1) and they all point to their respective machine names.
Any advice?
Kevin Sperring
Kevin,
This is expected if one of the search node is down.
If you want qrservers to provide results despite partial availability of nodes, you will need to enable allowpartialresults on the FAST Admin node:
($FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc) .If you don't have the parameter, please add it on this file (allowpartialresults =1 ) and restart the qrservers.
If you want qrservers to shut down http sessions upon problems connecting to its local fdispatch (which partial is NOT a case of), you could add the httpdisable flag.
Edit the file $FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc and change the value httpdisable=0 into httpdisable=1.
Similar Messages
-
R12 Single node to Multi-node Configuration
Hi All!
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
Thanks and Regards,
cmadiam82Hi,
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
Thanks -
CF installer server or multi-server configuration
Previous versions of CF installer allow you to install either server or multi-server configuration.
This made it hard to change a CF box from server to multi-server since you would have to re-install CF to apply change.
CF10 installer lets you install stand-alone installation. After installing ColdFusion in stand-alone mode, you can create multiple instances (provided you have an Enterprise or Dev license).
Nice. Easy to alter a CF box from server to multi-server.
Thanks, Carl.Hi,
i read the issue in detail. however it is hard to troubleshoot via froum.
To such issue, it is not an efficient way to work in this community since we may need more resources, for example memory (application) dump or ETL trace, which is not appropriate to handle in community. I’d like to suggest that you submit a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
Please visit the below link to see the various paid support options that are available to better meet your needs. http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Create New Oracle R12 Server with multi nodes and migrate the Production Data on it ?
Good Day,
I have New Task and I don't know how to start.
Am working on Oracle Application 12.1.3
And Database 11.2.3
OS Redhat Linux 6.1
My Production Server have the database and the application on the same Server (Single node),
I want to create another 2 Servers with same Operating system to separate the application and the Database to be each one on separate server (Multi Nodes),
And Migrate the Production Server Data on It?
And i need to know how many days it will takes because we are live now ?
RegardsInstall the OS on the new servers -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Use Rapid Clone to move the application/database to the new server.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
For the duration, it depends on the size of your application/database and how long it takes to copy the files.
Thanks,
Hussein -
How to configure oem 2.1.0 on the client machine to detect nodes on the server
I've oracle 8.0.5 running on a solaris 2.6 server. I also have oem 2.1.0 running on my NT workstation. But oem won't automatically detect nodes on the server. IA is running on the server and the client very well
What do you guys thinkHi
Do you have an entry for the server db in your tnsnames.ora file
(client machine)where OEM is running? If not, add an entry and
try discovering again
sarath -
Oracle 10g multi node installation
Hi,
Multi node installation for Oracle 10g Appl Server
- Node A: Install core business Database server.
- Node B: Install Application Server Infrastructure (OID, repository database).
- Node C: Install Application server middle tier (forms, reports, portal, discoverer, java) at node C. must specify the OID server (node B). And configurre tnsnames to access database server (node A).
steps for this. Any doc or link
Thanking you
regards,As simple as you mentioned.
1.- Install db in node A
2.- Install Infra in node B, you will get a servername and port for OID (look on $OH/install/portlist.ini to get it), and the password, usually the same as for the System and Sys users for the repository.
3.- Install Apps in node C, even if you install infra and apps in same node, the installer will always promp for the OID server name and port wich I mentioned earlier.
4.- Configure node C tnsnames to access node A
Hope this helps
Greetings. -
Financial Analyzer Web access after multi-node setup
hey guys
any idea on the follwoing
Financial Analyzer Web access after multi-node setup
any hints will be helpfull
fadiThank you Fadi for this quick idea.
I will try to apply it in our environment.
If we couldn't do it, I think that we have other two options; first options is to reinstall OFA in the Web Server Node where there is a Metalink note states how to move OFA from server to server. The second option is changing the configuration files of OFA to reference the Web Server in the new node.
I will update you with the results.
Regards,
M.Muhtadi -
How to get the Change node in Production Server!!!!!
Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S -
Weblogic Admin server - Configuration/Server Start/Arguments ignored?
Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain> -
Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4
I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec") -
SQL Server Configuration Manager
Hello,
I have a SQL 2008 SP3 install on Server 2012. It is clustered active/active. When opening SQL Server Configuration Manager > SQL Server Services, I receive the following message: The server threw an exception [0x80010105]
I have tried restarting WMI and this didn't resolve the issue as many posts and blogs have suggested.
I found this article: http://support.microsoft.com/kb/2849344 but it only applies to SQL Server 2008R2 not 2008 that we have installed.
It states to grab a msclus.dll out of %windir%\syswow64 on a Windows 2008R2 box. A 32bit msclus.dll file or a 64bit file does not exist on a 2008R2 box in this directory. There is one in %windir%\system32 directory but the article clearly states
it exists in the Syswow64 folder.
Any help would be appreciated.
Thanks,
zWindowsHi zWindows,
According to your description, the msclus.dll does exist in %windir%\system32 directory in your Windows Server 2008R2. I check this file in my cluster environment, it does exist in %windir%\winsxs directory. Personally, it belongs to system files, and maybe
saved in different system path due to the system version and bit. The different path will not affect to copy this file to the related directory. Then, register this .dll file on each node of the cluster.
About this exception [0x80010105], we need to verify if you change service account to a new domain user by SQL Server Configuration Manager in a clustered SQL Server instance. If yes, you need to ensure that Everyone is added to "Remote Launch" and "Remote
Activation" DCOM permissions, and new domain user account have read rights in WMI.
For more information about exception 0x80010105, you can review the following article.
http://blogs.msdn.com/b/sql_server_reflections/archive/2012/08/28/unable-to-change-the-service-account-of-a-clustered-sql-server-instance-the-server-threw-exception-0x80010105.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server Configuration Manager 2008 - Slow to bring back SQL Services
HI
WMI queries are taking ~ 1 minute to bring up SQL Server services using the SQL server Configuration manager 2008. The cluster is a two node cluster with ~ 6 instances installed. Each node is running Windows 2008 R2 64 Bit and has been configured
according to best practice guidelines.
Do I need to re-build the WMI repository on each node in the cluster? Are their any associated risks?
Any guidance would be appreciated.
Cheers
RobHello,
As already noted, this invokes WMI. I would start there and check to make sure the WMI processes aren't bloated or otherwise running out of memory or handles. I've had issues with this when running with things like IBM Director and Tivoli products that have
large numbers of WMI queries. This blog post may also help you getting started:
http://blogs.technet.com/b/askperf/archive/2008/09/16/memory-and-handle-quotas-in-the-wmi-provider-service.aspx
-Sean
Sean Gallardy | Blog |
Twitter -
Which Server Configuration When Installing
I am going to host a coldfusion database/server on
webhost4life.com , I paid them a little extra to do this and they
will set up most everything on their end. My question is this......
When first installing coldfusion mx 7 software on my laptop,
which of the three server configurations do I select during the
installation?
Server configuration,
Multiserver configuration,
or J2EE configuration
Thanks in advance.A high level overview:
Standard is the basic, "one" use version. With standard you
can only
have one instance of CF running. Thus all websites configured
will use
the settings of this one instance. Unless you are running a
server OS
on your laptop, you can only create one website, thus the
standard is
probably sufficient.
Multi-home is as it says you can create multiple instances of
CF each
running with it's only settings. Then each instance can be
connected to
one or more websites. Thus a website will use the
configuration of the
instance CF to which it is assigned. There is more
configuration
involved in this, since CF is installed under a JRun
directory rather
then the other way around. This does add complexity which
could be
unnecessary for a workstation.
J2EE is for using alternate Java Engines other then the built
in Adobe
nee Macromedia JRun that the other setup use. Thus if you
have
Websphere or some other J2EE system, this would be for you,
again fairly
unusual on a common laptop. -
Has anyone installed XMLP in a multi-node appsTiers environment?
We are experiencing a problem with installing XMLP 4.5.
Our EBS 11i(11.5.9) configuration: dbTier is on HP-UX, admin/CM of appsTier is on HP-UX and web/forms of appsTier is on Windows, i.e two nodes appsTier.
Applying the major patch 3554613 (XMLP 4.5) created $APPL_TOP/xdo/11.5.0 on both UNIX and Windows nodes. But the $JAVA_TOP/oracle/apps/xdo is only created on UNIX node.
When we reported the problem of XMLP in relation to OA Framework (see my other posting on this forum) to Oracle, the support engineer said the patch should create %JAVA_TOP%\oracle\apps\xdo on Windows too. But he is not sure as he only has a single node environment.
We tried a couple of times of reapplying the patch without any luck.
We start wondering if the XMLP 4.5 can be successfully installed in a multi-node appsTiers environment.
So my question is:
Has anyone successfully installed XMLP in a multi-node appsTiers environment?
Thanks.Hi
XMLP is installed on the apps middle tier so it should be no problem. The only thing, once you have it installed is if you want to use our cfg file you'll need to have the cfg file installed on all nodes.
Whats the TAR number ?
Tim -
Question on multi-node R12 install
I assume that for a Multi-node install of R12, we have to run rapidwiz on nodeA and choose "Install Oracle Application release 12.1.1" , choose the appropriate services for this node ex: "Batch Processing"
then once the install is done, copy the config.txt file over to NodeB and run rapidwiz on nodeB and choose "Install Oracle Application release 12.1.1" , choose the appropriate services for this node ex: "Web, root and other services" ..
This is not really clear in the R12 Rapid Install guide
Can someone confirm
ThanksHi;
Briefly you should follow those:
1. Copy stage both server
2. Create same mount point both server (let us say /u01)
3. Create same folder on both server under /u01 (let us say /u01/PROD)
4. Give 777 permission to stage and /u01/PROD folder
5. Dont forget to both server entery to /etc/hosts on both server
6. Start installation first db side
7. While you are making multinode installation copy config.txt to apps server
8. Start installation on apps server and give config.txt for instalaltion
PS: Ofcourse create user :)
Hope it helps
Regard
Helios
Maybe you are looking for
-
Can you open a keynote presentation in PowerPoint and vice versa?
I've opened a powerpoint presentation in Keynote but had trouble opening a Keynote in Powerpoint. I wasn't sure if it was just that particular keynote or is does it just not work. I know some formatting sometimes get lost. What's the quality like
-
based on a previous forum post I was informed "get-publicfolderdatabase -status" would list the dates/times the public folder database was last backed up. I have just run this command and it doesnt give any dates/times at all. For mailbox DB: $dbs
-
Do I get charged extra for "Extended 3G Data"?
I'm living in an area that has "Extended 3G Data" on the map and was just wondering if this will cost me extra? Or will I be able to use Verizon normally and not have to worry about any extra charges?
-
Hi friends, i would like to know the configuration setting required for shop floor paper print out like producton order, confirmation, time ticket etc. i have checked execute printing in opkp. in control key, print, print time ticket, print confirmat
-
I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run! Download was complete and I accepted everything and restarted computer but its still running 10.7.5