Multi-plugin nightmare!

Alright folks, I've tried to find any info I could in other threads about this but to no avail (if I missed it, just send me the link).
I downloaded Multi-plugin 2.5 for iTunes 7 and once the install had finished, I tried to open iTunes and instead of it opening I get this message box that pops up: *"The procedure entry point RegEnumValueW could not be located in the dynamic link library MPlugin.dll."*
Any help to get this problem fixed would be greatly appreciated, thanks so much!

You can try reinstalling iTunes. The forums I read had no definitive solution when uninstalling the plugin didn't cure the problem, but didn't say that reinstalling wouldn't cure the problem either. Just nothing one way or the other.
Reinstalling iTunes will normally not affect the tracks and settings already in your iTunes. That said, it's wise to make a backup of any tracks that you've purchased from the iTunes Music Store or that would otherwise be difficult to replace and of your playlists before you upgrade, just in case something would happen to go wrong.
Good luck.

Similar Messages

  • Multi-plugin help!

    um.. i downloaded multi plugin for itunes, but i dont know how to uninstall it. im ******** when it comes to computers, so where would the prog have been saved to?

    It's important to understand, that the Aux tracks will merely be the signal path for the audio, NOT the MIDI.
    The first thing you need to do, which I don't think you've done (by what your post says), is to create a Multi-Instrument in your environment, and then cable it to the Audio Instrument you have Kontakt inserted into. That Audio Instruments MIDI channel then needs to be set to "All".
    Then, from your arrange page, you will see this new Multi-Instrument in your list of available MIDI instruments. It's from these MIDI tracks, that you will play and program from. These tracks will hold the MIDI regions.
    Then, as you have done, assign the various outputs from Kontakt as inputs to your Aux tracks. These Aux tracks are the audio objects where you will control the volume of the various instruments in Kontakt, as well as where you can write automation, add plug-ins, etc...
    So in summary, 2 tracks will exist for each Instrument in Kontakt. A MIDI track (made from the multi-instrument), and an audio track/object (which is the Aux track)
    Hope that makes sense...

  • Shared global data in multi-plugin file

    Ok, I see that in the SelectoramaShape example that it is possible to put multiple plug-ins in a single file...cool. My question: is global data visible/shareable between the plug-ins?
    My situation is this: I have a visible filter plug-in ("Trigger"), a hidden persistent automation plug-in ("Master"), and a hidden filter plug-in ("Slave").
    The idea is for Trigger to do the 'public' stuff (read/write scripting parameters, put up and manage the UI etc). Master listens for it to finish, does some things filters can't do (e.g. create an adjustment layer), and then commands Slave to do the heavy lifting (e.g. read from a specified pixel layer and write out to the mask of the newly-created adjustment layer). So far I have the three plug-ins doing pretty much nothing, all in the same .8bf file. What seems to work is that Master indeed sees Trigger run and successfully executes Slave. And all three seem to be able to read/write shared global data structures without causing BSODs or global warming.
    My concern is that a plug-in is a DLL, the key word in that acronym being "dynamic": I'm worried that things will move around or whatever, and/or that I'm doing something blatantly illegal by not allocating/deallocating/registering/whatever and using multiple levels of abstraction to read/write a fistful of integer values. Is the fact that it seems to be working an artifact of having 16GB of RAM, so nothing ever moves? Does the "persistent" setting for Master keep it locked down? Or am I just totally overthinking this whole thing?
    (This can't possibly be an original question, but the search function on this forum doesn't play well with me. Feel free to just post a link to a FAQ or something.)

    The C library is shareable. But you don't want it to be shared. That's your question summarized, isn't it?
    You probably can't prevent it from being shared, so to prevent multiple use of it you would have to queue up the requests to be done one at a time. WynEaston's suggestion of having the servlet implement SingleThreadModel would help, but I believe the servlet spec allows servers to run multiple copies of a servlet that does that (as opposed to running a single copy in multiple threads).
    Your other alternative is to rewrite the math in Java, or at least in some object-oriented language where you don't need global variables (which are the source of your problem). All right, I can already hear you saying "But that wouldn't be as fast!" Maybe not, but that isn't everything. Now you have a problem in queueing theory: do you want a single server that's fast, but jobs have to wait for it, or do you want multiple servers that aren't as fast, but jobs don't have to wait? That's a question you would have to evaluate based on the usage of your site, and it isn't an easy one.

  • ITunes 7: "memory could not be read" error

    I am running the latest version of iTunes 7 and sometimes get the following error message:
    "Instruction at Ox5ad71331 referenced memory at 0x00000014. Memory could not be read"
    This happens after iTunes crashes. The appearance of the crash is that the font will become very dark/bold and dark lines will appear around the cells of the library, then the program will crash.
    Is this related to iTunes 7 or Multi-Plugin, which I use to make my media buttons on my laptop work with iTunes? I have no skinning options chosen.
    Thanks.

    I uninstalled the Multi-plugin and haven't had the problem since, in fact, no crashes at all.

  • [SOLVED] HDMI audio - "alsactl restore" not working

    I can't seem to get audio through HDMI working properly.
    I was able to get it a few weeks ago, on Debian Jessie by doing the following:
    Creating ~/.asoundrc with the following contents:
    pcm.!default {
    type hw
    card 0
    device 3
    running "alsactl restore"
    I got this from https://bbs.archlinux.org/viewtopic.php?id=132641
    When I run "alsactl restore" now, on Arch, I get the following output:
    alsactl: state_lock:114: file /var/lib/alsa/asound.state lock error: File exists
    alsactl: load_state:1677: Cannot open /var/lib/alsa/asound.state for reading: File exists
    Found hardware: "HDA-Intel" "Intel PantherPoint HDMI" "HDA:14f1506e,10280569,00100003 HDA:80862806,80860101,00100000" "0x1028" "0x0569"
    Hardware is initialized using a generic method
    Audio continues playing on my laptop speakers, not on my TV.
    I tried renaming "/var/lib/alsa/asound.state" and then running "alsactl restore", but I got the same error (even though the file no longer exists!).
    Running "aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav" does give me sound on my TV speakers through HDMI.
    Any ideas?
    Last edited by z894 (2014-07-31 03:46:36)

    What exactly are you trying to achieve? Do you want to switch between laptop speakers and hdmi? Type hw is not recommended and you are using it directly, which means if the format does not match it will not accept it, s a plug between would make sense.
    Alsa wiki wrote:Simply setting a type hw as default card is equivalent to addressing hardware directly, which leaves the device unavailable to other applications. This method is only recommended if it is a part of a more sophisticated setup ~/.asoundrc or if user deliberately wants to address sound card directly (digital output through eic958 or dedicated music server for example).
    You could send sound two both cards and then toggle mute between them. See multi plugin for this. It could be problematic though.
    I also fail to see what 'alsactl restore' is supposed to achieve here, since it restores the previous settings for ~a[lsa]mixer, you would have to store the appropriate settings first with 'alsactl store' [in multiple files]. Switching between configurations should be easier.

  • ITunes freezes randomly when updating 60Gb Video

    Had a 40Gb Photo. Now have new 60Gb Video. Have updated iTunes software. Have update iPod software. When I plug in to load songs and pictures, iTunes will randomly freeze up. Have left it as long as 6 hours in case it was working in the background. In force quit,iTunes says 'Not Responding'. Have to hard-remove, as force-quit will not unlock the computer. This is random, it has loaded 18 (out of 4,000), or 256, or 857, or any other number. Does not seem to lock up on any particular song. Have changed setup and tried to load in small numbers, it seems to work for music (though this is not optimum or correct). Won't work with pictures. If it freezes, all the pictures that were previously loaded in small numbers are lost.
    Someone suggested removing the preferences, but I can't find out how .
    to do this.
    Thanks for any help.
    17" G4 Powerbook   Mac OS X (10.4.6)   rocstor 160Gb drive
    17" G4 Powerbook   Mac OS X (10.4.6)   rocstor 160Gb drive

    I had the same problem back at xmastime and I finally found that a plug-in called "multi plugin" which was installed by "evil lyrics" was causing the itunes crashes. It only crashed when syncing with the ipod. This was when the ipod was new so it was trying to load everything but itunes would crash after 5 or 10 minutes of syncing.
    I got rid of it by uninstalling itunes, deleting the itunes program directory that was left behind, and reinstalling itunes. Once I did that everything worked fine.

  • Direct Digital Output through Quicktime?

    I've used iTunes for years (ever since my first iPod) and I've never had a problem with it. However two years ago I got a HiFi receiver. Nothing fancy or anything, but ever since I've been wondering if I could some how bypass my soundcard's DAC and get iTunes (through Quicktime? I'm assuming iTunes uses Quicktime to decode audio. If I'm wrong could someone please move this thread to the iTunes for Windows sub-forum?) to output directly to PCM through S/PDIF? My soundcard has the ports (both coaxial and Toslink), but the only way that I've so far found to do this is either with an Airport Express (which is pretty much $100 to connect my HiFi which is 2m away from my computer, although currently this is pretty much my only option) or through the 3rd party plugin, multi-plugin (and foobar 2000). Unfortunately multi-plugin doesn't support a version of iTunes that will support my iPod.
    Does anybody know of any other way to get iTunes/Quicktime to output PCM directly and bypass my soundcard's DAC? I can get it to pass it to the soundcard, have the soundcard decode it and recode it to PCM/AC3, but that's basically going from digital to analogue to digital again which is a lossy conversion. 3rd party plugins are fine as long as they work with iTunes 7.4 or newer.
    Plugging my iPod into the HiFi is not desirable as I would like to control the music from the computer.
    Thank you for reading.

    Anybody? Are there any 3rd party plugins for iTunes/Quicktime that I haven't heard of?

  • Can I use another program in stead of Itunes

    Dear,
    Itunes is not a userfriendly program is it possible to use another programm in stead of itunes. I want to keep al my CD's in WAV files, as I go for high quality. Some problems that I face when I put WAV files in itunes are:
    - As I work with an external disk of 150GB my itunes librairy is sometimes empty. To fill my librairy I have to add my complete itunes map to that libriary. It does not only take a lot of time, but the real problem is that my complete CD info has gone. I wil give an example. When I put music in my Librairy I name the following items: Name of song, CD, artist and genre. But if I have to renew my library Itunes shows 01 <songname 1>, 02 <songname 2> .... etc. My complete info of that CD has gone. I don't know the genre, CD name and artist anymore. I takes days to correct it. It is terrible.
    - Another problem is that I can not ad booklets to a WAV file.
    - Moreover, I have a lot of DVD's that I want to Add in Itunes. As I go for quality, It is not possible to copy the complete DVD at DVD quality and the menu structure and subtitels have gone. As I'm dutch I like to have dutch subtitles. In Itunes this is not possible.
    As Itunes is not userfriendly, can anybody tell me with alternative programm I can use
    Your sincerely
    Ivo Cerfontaine

    Oh, and fyi, I have installed a multi plugin and tried to use several itunes skins from Deviantart, and I have no clue what to do with any of it. I need detailed instructions please, I am a noob at this!

  • Itunes slow and sputtering  --  frequent issue with many

    well so much for an update. after updating to latest itunes, 7.0.2.16, my songs and movies skip and run slow.
    i have tried all the fixes: new sound card driver, delete quicktime and reinstall, sound enhancer conflict, no plug ins, hardware excelleration...
    i cannot listen to my music, and its all locked in the skin of the apple. dang.
    help me apple, please help me, and the others - or how about admitting there is a problem so i can quit tweeking the @#$% out of my computer.
    PS: i do not have a pavillion laptop or a dell desktop, like so many with this problem seem to have.
    respectfully.
    amd - fast-2005   Windows XP Pro   1 gb ram

    You can try one more thing. It's a bit of a hack, but it's worked for many, many people.
    Find and install Foobar 2000.
    Then find and install the "multi-plugin for iTunes" and install it.
    Open up Foobar and set it to use KERNAL streaming. Close Foobar. and give it a go.
    That's the only other suggestion I can think of that you haven't already tried.
    iTunes skin with Foobar sound engine = good to go.
    iTunes for windows needs a major overhaul. It's laggy, too limited in the codecs that can be used, and has no kernal streaming. (sigh)
    They really need to do something fast.

  • How do you bring the Aqua UI back into iTunes?

    I have tried multiple things for to bring Aqua into iTunes 7.0.1 and i got nothing. If you have a suggestion, please let me know and insert a link please; and don't tell me "Multi-Plugin". That is the most stupid download because there is aqua in it but the only thing missing is the aqua scroll bars and that the format of the whole thing is weird. Please let me know.

    Hi,
    I also sought a solution to revert the look of iTunes 7 to it's former aqua look. The app that I finally settled on is called Aqua4iTunes.
    You can find it at MacUpdate, here: http://www.macupdate.com/info.php/id/22881
    Or at Version Tracker, here: http://www.versiontracker.com/dyn/moreinfo/macosx/30878
    The home page for the app, is here: http://www.paul.barlow.ukonline.co.uk/
    I hope that this helps you.
    Brian

  • Itunes won't open; what should I do?

    I installed the Multi-plugin file for itunes and afterwards when I tried opening itunes it said "Itunes cannot find RegEnumValueW in the directory MPlugin.dll" or something like that. I ran the installer and clicked "repair or replace damaged or missing files" and I still get the same problem. I was going to delete itunes and do a clean install; but when it says "completely remove itunes" does that mean it gets rid of the the files in my documents/my music/itunes? Because I've spend several hundred dollars on things like songs, movies and music vids in the itunes store and don't want them all deleted. Thanks to anyone that can help!

    Maybe: run a search for that plugin whatever.dll and delete it (copy it somehwere else 1st incase it doesn't work) and ensure you delete from the right folder (ie. itunes) incase there are others on your system.

  • How cna I change the text and background colours in iTunes?

    Can anyone tell me how I can change the text and background colours in iTunes? I am a visually impared user and my main requirement on a PC is to change the colour schemem to white text on a black background. Most software adopts the settings of your colour scheme but iTunes goes it's own and has everything on white backgrounds. I cannot read from white backgrounds (dazzle - that sort of thing). I have never used iTunes for this reason. I have always been a devotee of by far the best media player out there Musicmatch Jukebox, who allow you to edit skins in every detail. However, recently Musicmatch was taken over and users were forced to migrate to the ridiculously poor Yahoo Music Jukebox. A massive downgrade in so many ways.
    I want to use iTunes but will not be able to if I cannot sort this issue out. I downloaded 7.5 before discovering that if you want to use Multi Plugin for skins you need to go back to iTunes 7.02. I've done that, but the skins available are completely pointless to my eyes. They don't change the colours of the main components, just the graphical bit at the top.
    What I need to do is change the background of the main browser windows so that they are black and the text is white (you know the track lists and tree views, etc). This must be a very simple case of just changing the codes somewhere, but I can't find where. I read somewhere that you need to hack into something call ResourceDB inside a file called iTunes.jar. There is no such file on my PC. Could that be a Mac thing?
    Please help someone if you can. I would like to become an iTunes user. There seems to be more music available than on Napster which I currently use.
    Thanks in advance
    Z

    In my opinion, it seems that Apple has decided to sacrifice usability so that iTunes would look more like a Mac application. You are probably already aware that using Windows' built-in high-contrast settings do not work in iTunes.
    I did some hacking at the resource file a while back, but I was unable to figure out how to change the color of the background. IIRC there was a resource whose description indicated it would change the background color, but when I changed the resource, nothing happened.
    I was, however, able to figure out how to make the "large" font much larger (any size you want, I suppose). Will that help? See
    http://home.comcast.net/~teridon73/ituneshacks/index.html
    You should provide feedback to Apple:
    http://www.apple.com/feedback/
    I don't think it is too harsh to call it "shameful" that Apple has chosen this design path. Where I work, we are required to make ALL applications (or any computer interface, such as a website) section 508 compliant. Of course, I'm being a bit of a hypocrite, because I've made no effort to make my website compliant. If you have trouble reading it, please let me know.

  • "Show Duplicate Songs" Function doesn't appear

    As the title says, I can't see the "Show Dupliate Songs" function. The whole selection has disappeared. I have looked under each menu and it's supposed to be in View, but isn't. It was a nice function to have I and I hope I will be able to restore it. (Just updated to 7.02.16)

    We have seen reports on these boards of multi-plugins making nuisances of themselves before but, to my knowledge, this is the first time they've hid options from the Menu bar.
    ... is there another program out there that can allow the use of my laptop's Media keys without being focused on the itunes window?
    A quick search on Google returned this page as the top result.
    If that's not helpful you can look for anything else that seems promising.

  • ITunes works not fluently

    I'm working on iTunes 7 (with Multi-Plugin 2.4.2), and when i'm playing mp3s/aacs (especially with high or very high bitrates) blayback is not flent.
    This effect increased when I installed Multi-Plugin, but it occured earlier too.
    When the player is about to change played file (when song ends) computer freezes for 2-3 secounds
    This error occures especially when i'm using Web browsers (FF and Opera) and MS Office.
    I've got Celeron 2.6 GHz and 515 MB memory. - isn't it a bit few?
    I chcecked Memory usage:
    iTunes 72 - 80,5 MB
    Firefox 95 - 127 MB
    but, after summing up all apps there's always about 90 MB of free memory.
    Have U got any idea how to solve this problem?
    7.0.2.16   Windows XP Pro   Multi-Plugin 2.4.2

    Thanks, you both have right, but i tried another way:
    I reduced Firefox's memory consumption to 30-40 MB by disabling cashe - it has done a lot! (i'm not telling, that problem is solved, but the way it is, is now accepltable)
    I have been using iTunes 6 - there was no problem - You're right.
    Robert: Maybe development team will fix it in iTunes 8 ;P (You have to admit, skipping with 2GB of memory is ridiculous)
    Despite freezing i'm going to go on using v.7 - it's better (as for me) especially, when i've fixed Firefox's memory problem.
    Windows XP Pro

  • Duplicate Items Option Disappeared??

    When I Right Click on the Itunes Music folder, or got to Edit on the menu - there isn't a Duplicate Items option, neither is there on My Ipod section.
    According to the Help there should be.
    Has anyone any idea why they have disappeared?
    Acer Aspire T180   Windows XP   Ipod Video 80GB

    Do you have any Plug-Ins? I seem to rember a thread about Multi plugin doing this IIRC.
    There is some Apple help on troubleshooting 3rd party plugins here:
    http://docs.info.apple.com/article.html?artnum=300063

Maybe you are looking for