Multi-plugin help!

um.. i downloaded multi plugin for itunes, but i dont know how to uninstall it. im ******** when it comes to computers, so where would the prog have been saved to?

It's important to understand, that the Aux tracks will merely be the signal path for the audio, NOT the MIDI.
The first thing you need to do, which I don't think you've done (by what your post says), is to create a Multi-Instrument in your environment, and then cable it to the Audio Instrument you have Kontakt inserted into. That Audio Instruments MIDI channel then needs to be set to "All".
Then, from your arrange page, you will see this new Multi-Instrument in your list of available MIDI instruments. It's from these MIDI tracks, that you will play and program from. These tracks will hold the MIDI regions.
Then, as you have done, assign the various outputs from Kontakt as inputs to your Aux tracks. These Aux tracks are the audio objects where you will control the volume of the various instruments in Kontakt, as well as where you can write automation, add plug-ins, etc...
So in summary, 2 tracks will exist for each Instrument in Kontakt. A MIDI track (made from the multi-instrument), and an audio track/object (which is the Aux track)
Hope that makes sense...

Similar Messages

  • Multi-plugin nightmare!

    Alright folks, I've tried to find any info I could in other threads about this but to no avail (if I missed it, just send me the link).
    I downloaded Multi-plugin 2.5 for iTunes 7 and once the install had finished, I tried to open iTunes and instead of it opening I get this message box that pops up: *"The procedure entry point RegEnumValueW could not be located in the dynamic link library MPlugin.dll."*
    Any help to get this problem fixed would be greatly appreciated, thanks so much!

    You can try reinstalling iTunes. The forums I read had no definitive solution when uninstalling the plugin didn't cure the problem, but didn't say that reinstalling wouldn't cure the problem either. Just nothing one way or the other.
    Reinstalling iTunes will normally not affect the tracks and settings already in your iTunes. That said, it's wise to make a backup of any tracks that you've purchased from the iTunes Music Store or that would otherwise be difficult to replace and of your playlists before you upgrade, just in case something would happen to go wrong.
    Good luck.

  • Multi-language Help in a multi-language web app

    Hello!
    I had posted this on the RH HTML forum but removed that and
    posted here for a wider audience...
    ***Please note: this question is not specific to RH but is
    applicable now that RH 7 is unicode enabled. If you have experience
    that does not relate to RH, please share anyway!
    Once I have developed WebHelp (for example) in multiple
    languages, how do I connect the help files to the web application
    that the help is about? How does the correct language output get
    displayed? For example, the application (that the help documents)
    changes its interface based on browser language. Can the
    appropriate help content be displayed based on browser language?
    How is multi-language help generally implemented for an end user?
    And, equally important, how does context-sensitive help
    (mapping) work with multiple languages?
    I have never been involved in a multi-language development
    effort and so I have no experience to relate this to. Any guidance
    will be greatly (and gratefully
    ) appreciated!
    Kathy

    That's how our developers do it, but I just want to throw in
    one other detail. The help output for each language has to be in a
    separate directory. So if you have 5 languages, you'll have 5
    directories. It's up to the developers to code the app so it
    detects the browser language, then looks in the appropriate help
    directory when the user clicks your help link or icon.
    --Ben

  • Multi-mapping help

    Hi, anybody can help to point out a blog about how to create multi-mapping with detailed step-by-step and pictures.
    I try to learn how to create one.
    I read sap help as below, it's too complex to understand , thank you
    http://help.sap.com/saphelp_nw04/Helpdata/EN/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm

    Hi Shiwudao,
      In case if you want to merge messages coming from different receivers by using Multimapping .You just need to create Multimapping between abstract interfaces and specify them in the Transformation step,and at the same time you need to take care of the ID objects also.Here u need not use any Enhanced interface determination also.
    Refer the Integration process design in  following Wiki on BPM Pattern to get an idea on how to use multimapping in BPM transformation step.
    https://wiki.sdn.sap.com/wiki/display/BPX/BPMPatternMultiIfconditionExplained(stepbyStep+Procedure).
    Thanks,
    Ram.

  • Flex 3.0 QTP Plugin Help

    With Adobe Flex 3.0 QTP Plugin where can we get Help and
    examples for the controls
    methods and properties?

    Hi,
    Automation docs for developers is here:
    http://livedocs.adobe.com/labs/flex3/html/
    Go to Flex Data Visualization Developer's guide-> Creating
    Applications for testing.
    Looks like the name of the chapter needs to be changed.
    QTP object type reference is here:
    http://www.adobe.com/go/flex3_qtp_object_type_reference
    Thanks
    Ram

  • Column flow plugin help

    Hello!
    If someone has experience with Column Flow plugin for InDesign, please help me get started.
    I have made 2 paragraph styles, with names starting with numbers 1 and 2 to indicate number of columns. Unfortunately, plugin just splits text into separate text frames but paragraphs with style named "2xxx" remain in just 1 column.
    Thanx in advance.

    With the version available for download, you need to set  the number 
    of columns in the object style.
    Column Flow has been drastically improved ( i.e. there can be any 
    number of different column settings, the number does not need to be 
    set in the style name, you can use up to four different object styles, 
    etc.), but the new version is not yet available on the web site. (The 
    documentation needs to be updated, etc.)
    Send me an email and I'll be happy to send you the newest version.
    harbsATin-toolsDOTcom
    Harbs

  • Multi angle help

    Im having issues trying to use the multi angle and the mixed angle feature.
    Is there a way to open a clip to view its GOP format.
    Also when i export the chapter and compression markers form FCP I am not able to view them in DVD studio Pro.
    Is there something I am missing?
    any help would be greatfully appreciated
    Josiah

    just new here.
    Just now I finished building a mixed angle dvd in SP4.
    Simulated it in SP4 and it seemed to work.
    First I got the bitrate too high error. I use 4 angles. But had a vid rate of 4.5 Mbit average + aif audio (1.5Mbit). I think the problem there was the fact that my maximum VBR was 7.8Mbit. So add 1.5Mbit to that and you're over 9Mbit. I replaced the AIF with PCM stereo and it built fine.
    When trying it on a player I can't change the angles. I keep seeing the first stream in the video.
    I did choose stream 1 in the disc property inspector. Might that be the cause of this?
    Or is it indeed as people assume that you can't build a working mixed angle disc in Sp4?
    If that's true, then I have to reinstall SP3. I have to do that anyway to get my export via quicktime out of FCP back. Because I also get the you need to serialize DVDSpro. Which I have.
    I think Apple has rushed this release out a bit too quickly. Lots of little bugs with this version.
    ---- 2nd post------
    Just tried rebuilding it, with the Disc property inspector Angle on not set.
    Same result.
    it looks like Apple screwed up big time and it is impossible to make multi or mixed angle DVDs under SP4.
    Thinking of going back to version 3 to finish this project properly.
    grrrr. Not happy with Apple right now.
    ------- 3rd post-----
    Just redone the exercise in the book dvd studio pro 3 (Rammseier-Sitter). I build the project, wrote it to an image (got to do that every time before burning a project, saves me screwed up discs).
    Then tested the image with DVD player.
    Where with my own project the other angles can't be chosen and viewed here it does work!
    So it must be possible to create a multi angle dvd.
    However I can't figure out the difference between that chapter 18 project assets and my project. Okay they use ntsc and I pal. In the exercise you have to export one stream yourself and I did it exactly the same with my streams.
    I tried a test project with just the part of the multi angle in my original project.
    Set up a similar structure and tried it. NOP. doesn't work.
    This is driving me insane. How can I get this to work?
    I hope this will work after reinstalling dvd sp3 or if I have the same problems.

  • Multi-clip help!!!!

    I have a project with 17 seperate multiclips. I first started making 1 multi-clip then editing it, then making the next and editing that and so on..... After making the 2nd multi-clip, when i try to edit it, the viewer locks up and wont let me change angles or between open and sync off. I get a message saying..
    "Sequence error: Unable to add clip to sequence.
    Possible media limits problem in clip or sequence."
    Now this problem is solved by restarting FCP, but it persists after i edit one multi-clip??????? Will trashing preferences help???? Maybe I have some setting wrong???? Any help would be appreciated. Thank you.

    If the problem goes away with a restart of FCP it does sound like trashing prefs could help. If it only happens on one certain multi-clip you might have to identify a bad clip that is in that multi-clip. But be aware FCP multi-clip/multi-cam is very powerful but very strange in its operation and behavior. You must research, read and do tutorials before expecting to operate without error.

  • Format Plugin Help Requested

    I'm trying to get my feet wet by creating a REALLY simple file format plug-in but I just cannot get my image data into photoshop.  I've modeled my simple plug-in after the TextFormat example code that came with the Advanced SDK.  I found this one much easier to follow then the SimpleFormat example, though I've spent a lot of time studying that project too.  I've also read through chapters 1, 2, 3, 9 and 11 of the documentation several times, but still cannot figure out what I'm doing wrong.  If anyone can point me in the right direction, I would be very grateful.<br /><br />Pretty much all the relevant code is below in my ReadStart() function.  It's long but relatively simple.  It just sets relevant formatRecord components, allocates memory for the 256x256x8Bit RGB image and paints some data into the buffer.  It then points formatRecord->data at the image data and calls formatRecord->advanceState().  My problem is that that function always returns formatBadParameters (-30500).  I'm at a complete loss at what I could be doing wrong.  Thank you for any help or suggestions you can provide.<br /><br />Rob<br /><br />PS - I'm running my plugin in Photoshop Elements 5.0 using which is running on Windows XP.<br /><br /><code><br />void TrivialFormatPlugin::ReadStart(void)<br />{<br /> static const unsigned int imSizeX = 256;<br /> static const unsigned int imSizeY = 256;<br /> static const unsigned int imSizeC = 3;<br /> formatRecord->imageMode = plugInModeRGBColor;<br /> formatRecord->depth = 8;<br /><br /> formatRecord->imageHRes = static_cast<Fixed>( 72 );<br /> formatRecord->imageVRes = static_cast<Fixed>( 72 );<br /><br /> //really only relevant for 16 bit data (depth = 16)<br /> formatRecord->maxValue = 256;<br /><br /> formatRecord->imageSize.h = static_cast<short>( imSizeX );<br /> formatRecord->imageSize.v = static_cast<short>( imSizeY );<br /> formatRecord->planes      = static_cast<int16>( imSizeC );<br /> formatRecord->colBytes   = static_cast<int16>( imSizeC );<br /> formatRecord->rowBytes   = static_cast<int32>( imSizeC * imSizeX );<br /> formatRecord->planeBytes = static_cast<int32>( 1 );<br /><br /> formatRecord->theRect.left   = static_cast<short>( 0 );<br /> formatRecord->theRect.bottom = static_cast<short>( 0 );<br /> formatRecord->loPlane        = static_cast<int16>( 0 );<br /> formatRecord->theRect.right  = static_cast<short>( imSizeX-1 );<br /> formatRecord->theRect.top    = static_cast<short>( imSizeY-1 );<br /> formatRecord->hiPlane        = static_cast<int16>( imSizeC-1 );<br /><br /> //32 bit equivalents<br /> formatRecord->PluginUsing32BitCoordinates = true;<br /> formatRecord->theRect32.left   = static_cast<int32>( 0 );<br /> formatRecord->theRect32.bottom = static_cast<int32>( 0 );<br /> formatRecord->theRect32.right  = static_cast<int32>( imSizeX-1 );<br /> formatRecord->theRect32.top    = static_cast<int32>( imSizeY-1 );<br /> formatRecord->imageSize32.h = static_cast<int32>( imSizeX );<br /> formatRecord->imageSize32.v = static_cast<int32>( imSizeY );<br /><br /> if( formatRecord->openForPreview || formatRecord->extractQuickThumbnail ) {<br />   //read whole image in at once<br />   uint32 bufferSize = static_cast<uint32>( imSizeX*imSizeY*imSizeC*formatRecord->depth );<br /><br />   BufferID bufferId;<br />   OSErr allocationStatus = formatRecord->bufferProcs->allocateProc( bufferSize, &bufferId );<br />   if( allocationStatus == noErr ) {<br />     Ptr dataBuffer = formatRecord->bufferProcs->lockProc( bufferId, false );<br />     for( unsigned int j = 0 ; j < imSizeY ; j++ ) {<br />       for( unsigned int i = 0 ; i < imSizeX ; i++ ) {<br />         for( unsigned int c = 0 ; c < imSizeC ; c++ ) {<br />           unsigned char value = ( i + j + c ) % 256;<br />           unsigned int index = c + i*imSizeC + j*imSizeC*imSizeX;<br />           dataBuffer[index] = value;<br />         }<br />       }<br />       formatRecord->progressProc(j, 256);<br />     }<br />     //send data to host<br />     formatRecord->data = dataBuffer;<br />     OSErr hostErr = formatRecord->advanceState();<br />     if( hostErr != noErr ) {<br />       LOG_DEBUG << "Error returned from advanceState() call:" << hostErr << " quitting.\n";<br />       LOG_DEBUG << "Format Record:\n" << *formatRecord

    It doesn't appear in the about plugins list. In the system info list doesn't appear and it reports no errors loading plugins: "Plug-ins that failed to load: NONE".
    The compilation and linking returns with no errors, and the same warnings that returns in win7. I'll try to compare the proyect options between that plugin and others that works with XP

  • Plugin help please

    im getting p/o'ed with this i want to "plugin" invigorator(its a plugin to us 3d models,in my case from cinema 4d) and i cant see to get it working...so i was just wondering where do u put those kinds of plugins because ive tried alot of them and none seem to work

    Once you've purchased 3D Invigorator, you place the unzipped Invigorator folder into the After Effects Plugins folder. Restart After Effects, create a solid and apply 3D Invigorator. It will ask you to enter the serial number to activate it. Without a serial, it will run in Demo Mode with a big multi-coloured X through the picture.
    The installation instructions in the supplied Readme file are very clear.

  • Plugin help for PS cc

    I just installed PS CC, but have already had portraiture +, I now need to use portraiture + as my PS plugin, but I am not sure how to do that...can anyone help?

    There are just so many options with Wacom kit nowadays, and along with the name changes, I for one, am having trouble keeping up.  I had a go of a 13 in Companion, and the 1920x1080 was more than enough for a 13 and a bit inch screen.  It was lovely to use, but from your point of view, they run Windows 8.1, and cost a fortune for their screen size.  They do have the huge advantage of being a stand alone product, but can be used with a large monitor in dual screen mode, but as the Companion is providing all the driving power, I'd wonder if that was enough.  I just looked and it is OK but not great.
    The one I saw was owned by Oz Master Photographer Peter Eastway, and he used it for all his presentations as main speaker at the 2014 PSNZ National Convention.  It was driving a pair of 1920 x 1200 projectors, but had to drop screen res to 1680 x 1050 to fit the 16.10 aspect ratio.  I have to say it was entirely up to the job!
    But too much money for the size IMO, but I might invest in a 13HD one day.

  • Skillbuilders Modal Page Plugin - Help in setting Modal window height/width

    Hello Apex Experts,
    I have downloaded the Skillbuilders Modal Page Plugin. I have tried to implement the same but my modal window is not showing correctly. I can see all the fields and scroll bar. I also tried to set the initial height/width settings but no luck.
    Can anyone help me?
    Your help would be appreciated.
    FYI: I'm using Apex v4.2 on Google Chrome.
    Many Thanks,
    Bhavin

    Bhavin,
    Go into the setting in the Shared Components for the plug-in and change the theme from custom to a number (1-5). Also, make sure to read this:
    http://www.danielmcghan.us/2011/08/new-browser-security-attributes-in-apex.html
    Regards,
    Dan
    blog: http://DanielMcghan.us/
    work: http://SkillBuilders.com/APEX/

  • Plugin help

    I just purchase photoshop cs6 for some reason it does not have any of the filter plug ins I tried to move them over from my cs4 and it says that photoshop does not recognize these files. I do not have any of my filters can anyone help me or do I need to call adobe directly

    It is always best to reinstall 3rd party plug-ins with your new version of Photoshop. Check the web site for the plug-in in question and they probably have an installer for CS6.
    And you have posted to the Photoshop Plugin and Companion App SDK forum. This forum deals with developers making plugins, panels or scripts for Photoshop.
    I would suggest the Photoshop main forum for your posting.

  • Safari wmp plugin help!

    I can't seem to watch streaming video on safari i have to open up ie to watch video. Every time i try to download the windows media player plugin for safari it says i have a more upgraded version and it ends up not working. please help i have a windows vista thanks!

    ACrobat adds a plugin itself. What did you add exactly?

  • Need help opening a few files on InDesign (plugin help)

    Trying to open up some files from flash drive on InDesign, it says "the document uses one or more plug-ins which are not currently available on this system" and then says "Cannot open...Please upgrade your plugins to latest version or upgrade to newest Adobe InDesign" Any help? Thank

    Hello,
    You might find your answer here.
    InDesign
    P.

Maybe you are looking for

  • Subtitles on tv out settings problems  (Classic 160GB)

    Hy people! I have some problems regarding subtitles on my iPod Classic. I turn on the subtitles in Ipod menu and everything works good when playing on iPod. But when I connect to TV using compenent AV cable (original Apple cable)some special characte

  • Please help me resolve this [VERY EASY]

    Basically, I wish to click the right arrow key and for the images to flip through as you can see in the fla file provided. I control the count using and array and I am using a gotoAndPlay type method, when I play it through it plays fine however when

  • Best Practices: SQL - JDO Migration

    Is there a Best Practices document that descibes SQL -> JDO migration. Thanks in advance.

  • Order management / Inventory management

    Hi All, I would like to learn more about these 2 modules from oracle EBS. Can someone please recommend a good documentation? or something similar? Appreciated in advanced! Leandro

  • Vector implementation in java

    Hi, I'm not too sure about the implementation of Vector in Java. Currently, this is what think: Vector.remove(0) - this is O(n), because you have to shift all the following elements up Vector.remove(size-1) - this is O(1), because you don't have to d