Multi Provider Changes - The Query cannot be executed
Hello,
I added a new characteristic to an existing multiprovider on which queries already exist.
I changed one of the existing queries adding that newly added characteristic.
Now the query cannot be executed. Please see the log...
I could successfully execute the query in RSRT....
Diagnosis
Characteristic 0BILL_TYPE is used in the Query Designer, but was deleted from the InfoProvider.
System response
The query cannot be executed.
Procedure
Characteristic 0BILL_TYPE is used in the query to be executed even though it was deleted from the InfoProvider. The problem can be solved by changing the query in the Query Designer. Here, you get a repair proposal, which removes the missing InfoObject from the query. Afterwards, check whether or not the query was defined correctly.
You can also delete the query.
Additional technical information:
IOBJNM = 0BILL_TYPE
ELTUID = Sell-In Qty
ELTTP = SEL
Notification Number BRAIN 407
Close
Any siggestions of how to adjust the multiprovider.
Thanks,
Vish
The check in query designer says that query is correct.
Only when I try to execute using the web it says that Char doesn't exist in infocube.
The query works fine in Analyzer & RSRT....I guess something got to do with the Browser or web..
Thanks,
Vish
Similar Messages
-
Error: "The search cannot be executed because the table has pending changes that would be lost."
Hello,
I'm working a developing an OA page that will displays the contents of an Oracle table and allows the user to update records in a table as needed.
When I hit submit button to save the changes in the update page, the control goes back to main page (where all the table records are displayed). It displays the updated record with the new information.However when I hit "Go" button on the mainPG, I get the error "The search cannot be executed because the table has pending changes that would be lost. and the changes are not committed.
ANy suggestions on where I should look will be greatly appreciated.
Posting code for my controller
=======================
if ( pageContext.getParameter("saveRate") != null )
personam.invokeMethod("saveRateToDatabase");
Code from my AM
=============
public void saveRateToDatabase()
getOADBTransaction().commit();
System.out.println("40--After commit has been executed");
Code from my VORowImpl
===================
package cggv.oracle.apps.gl.server;
import oracle.apps.fnd.framework.server.OAViewRowImpl;
import oracle.jbo.domain.Date;
import oracle.jbo.domain.Number;
import oracle.jbo.server.AttributeDefImpl;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class xxCggGlRatesVORowImpl extends OAViewRowImpl {
public static final int RATEID = 0;
public static final int FROMCURRENCY = 1;
public static final int TOCURRENCY = 2;
public static final int FROMCONVERSIONDATE = 3;
public static final int TOCONVERSIONDATE = 4;
public static final int USERCONVERSIONTYPE = 5;
public static final int CONVERSIONRATE = 6;
public static final int MODEFLAG = 7;
/**This is the default constructor (do not remove)
public xxCggGlRatesVORowImpl() {
/**Gets the attribute value for the calculated attribute RateId
public Number getRateId() {
return (Number) getAttributeInternal(RATEID);
/**Sets <code>value</code> as the attribute value for the calculated attribute RateId
public void setRateId(Number value) {
setAttributeInternal(RATEID, value);
//populateAttribute(RATEID, value);
/**Gets the attribute value for the calculated attribute FromCurrency
public String getFromCurrency() {
return (String) getAttributeInternal(FROMCURRENCY);
/**Sets <code>value</code> as the attribute value for the calculated attribute FromCurrency
public void setFromCurrency(String value) {
setAttributeInternal(FROMCURRENCY, value);
/**Gets the attribute value for the calculated attribute ToCurrency
public String getToCurrency() {
return (String) getAttributeInternal(TOCURRENCY);
/**Sets <code>value</code> as the attribute value for the calculated attribute ToCurrency
public void setToCurrency(String value) {
setAttributeInternal(TOCURRENCY, value);
/**Gets the attribute value for the calculated attribute FromConversionDate
public Date getFromConversionDate() {
return (Date) getAttributeInternal(FROMCONVERSIONDATE);
/**Sets <code>value</code> as the attribute value for the calculated attribute FromConversionDate
public void setFromConversionDate(Date value) {
setAttributeInternal(FROMCONVERSIONDATE, value);
/**Gets the attribute value for the calculated attribute ToConversionDate
public Date getToConversionDate() {
return (Date) getAttributeInternal(TOCONVERSIONDATE);
/**Sets <code>value</code> as the attribute value for the calculated attribute ToConversionDate
public void setToConversionDate(Date value) {
setAttributeInternal(TOCONVERSIONDATE, value);
/**Gets the attribute value for the calculated attribute UserConversionType
public String getUserConversionType() {
return (String) getAttributeInternal(USERCONVERSIONTYPE);
/**Sets <code>value</code> as the attribute value for the calculated attribute UserConversionType
public void setUserConversionType(String value) {
setAttributeInternal(USERCONVERSIONTYPE, value);
/**Gets the attribute value for the calculated attribute ConversionRate
public Number getConversionRate() {
return (Number) getAttributeInternal(CONVERSIONRATE);
/**Sets <code>value</code> as the attribute value for the calculated attribute ConversionRate
public void setConversionRate(Number value) {
setAttributeInternal(CONVERSIONRATE, value);
/**Gets the attribute value for the calculated attribute ModeFlag
public String getModeFlag() {
return (String) getAttributeInternal(MODEFLAG);
/**Sets <code>value</code> as the attribute value for the calculated attribute ModeFlag
public void setModeFlag(String value) {
setAttributeInternal(MODEFLAG, value);
/**getAttrInvokeAccessor: generated method. Do not modify.
protected Object getAttrInvokeAccessor(int index,
AttributeDefImpl attrDef) throws Exception {
switch (index) {
case RATEID:
return getRateId();
case FROMCURRENCY:
return getFromCurrency();
case TOCURRENCY:
return getToCurrency();
case FROMCONVERSIONDATE:
return getFromConversionDate();
case TOCONVERSIONDATE:
return getToConversionDate();
case USERCONVERSIONTYPE:
return getUserConversionType();
case CONVERSIONRATE:
return getConversionRate();
case MODEFLAG:
return getModeFlag();
default:
return super.getAttrInvokeAccessor(index, attrDef);
/**setAttrInvokeAccessor: generated method. Do not modify.
protected void setAttrInvokeAccessor(int index, Object value,
AttributeDefImpl attrDef) throws Exception {
switch (index) {
case RATEID:
setRateId((Number)value);
return;
case FROMCURRENCY:
setFromCurrency((String)value);
return;
case TOCURRENCY:
setToCurrency((String)value);
return;
case FROMCONVERSIONDATE:
setFromConversionDate((Date)value);
return;
case TOCONVERSIONDATE:
setToConversionDate((Date)value);
return;
case USERCONVERSIONTYPE:
setUserConversionType((String)value);
return;
case CONVERSIONRATE:
setConversionRate((Number)value);
return;
case MODEFLAG:
setModeFlag((String)value);
return;
default:
super.setAttrInvokeAccessor(index, value, attrDef);
return;
/**Gets xxCggGlRatesEO entity object.
public xxCggGlRatesEOImpl getxxCggGlRatesEO() {
return (xxCggGlRatesEOImpl)getEntity(0);Hi,
Check these links:
Oracle Apps: Search cannot be executed because the table has pending changes that would be lost
Re: Getting error in search page search cannot be executed
http://jneelmani.blogspot.in/2009/11/oaf-search-cannot-be-executed-because.html
--Sushant -
Good day,
On Search Page, I have searched for the record(s) then deleted a record and got confirmation message i.e. Record has deleted. Next when I search for any record I'm getting below error.
Error
The search cannot be executed because the table has pending changes that would be lost.
Could you please help me to fix this issue. Your response is highly appreciated.
Item properties:
Item Style : Image
Action Type: Fire Action
Event : delete
Below is the code using in CO and AM
Controller (processFormRequest):
if ("delete".equals(pageContext.getParameter(EVENT_PARAM)))
// The user has clicked a "Delete" icon so we want to display a "Warning"
// dialog asking if she really wants to delete the employee. Note that we
// configure the dialog so that pressing the "Yes" button submits to
// this page so we can handle the action in this processFormRequest( ) method.
String visit_id = pageContext.getParameter("visit_id");
String employeeName = pageContext.getParameter("last_name") + ", " + pageContext.getParameter("first_name");
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName)};
OAException mainMessage = new OAException("FND", "XXXX_EMP_DELETE_WARN", tokens);
// Note that even though we're going to make our Yes/No buttons submit a
// form, we still need some non-null value in the constructor's Yes/No
// URL parameters for the buttons to render, so we just pass empty
// Strings for this.
OADialogPage dialogPage = new OADialogPage(OAException.WARNING,
mainMessage, null, "", "");
// Always use Message Dictionary for any Strings you want to display.
String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
// We set this value so the code that handles this button press is
// descriptive.
dialogPage.setOkButtonItemName("DeleteYesButton");
// The following configures the Yes/No buttons to be submit buttons,
// and makes sure that we handle the form submit in the originating
// page (the "Employee" summary) so we can handle the "Yes"
// button selection in this controller.
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
// Now set our Yes/No labels instead of the default OK/Cancel.
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
// We need to keep hold of the employeeNumber and employeeName.
// The OADialogPage gives us a convenient means
// of doing this. Note that the use of the Hashtable is
// most appropriate for passing multiple parameters. See the OADialogPage
// javadoc for an alternative when dealing with a single parameter.
java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("visit_id", visit_id);
formParams.put("empName", employeeName);
dialogPage.setFormParameters(formParams);
pageContext.redirectToDialogPage(dialogPage);
else if (pageContext.getParameter("DeleteYesButton") != null)
// User has confirmed that she wants to delete this employee.
// Invoke a method on the AM to set the current row in the VO and
// call remove() on this row.
String employeeNumber = pageContext.getParameter("visit_id");
String employeeName = pageContext.getParameter("empName");
Serializable[] parameters = { employeeNumber };
// OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("deleteEmployee", parameters);
// Now, redisplay the page with a confirmation message at the top. Note
// that the deleteEmployee() method in the AM commits, and our code
// won't get this far if any exceptions are thrown.
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName) };
OAException message = new OAException("FND",
"XXXX_EMP_DELETE_CONFIRM", tokens, OAException.CONFIRMATION, null);
pageContext.putDialogMessage(message);
Application Module:
public void deleteEmployee(String visit_id)
// First, we need to find the selected employee in our VO.
// When we find it, we call remove( ) on the row which in turn
// calls remove on the associated EmployeeEOImpl object.
int empToDelete = Integer.parseInt(visit_id);
OAViewObject vo = (OAViewObject)getNonEmployeesSummaryVO1();
NonEmployeesSummaryVORowImpl row = null;
// This tells us the number of rows that have been fetched in the
// row set, and will not pull additional rows in like some of the
// other "get count" methods.
int fetchedRowCount = vo.getFetchedRowCount();
// We use a separate iterator -- even though we could step through the
// rows without it -- because we don't want to affect row currency.
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
row = (NonEmployeesSummaryVORowImpl)deleteIter.getRowAtRangeIndex(i);
// For performance reasons, we generate ViewRowImpls for all
// View Objects. When we need to obtain an attribute value,
// we use the named accessors instead of a generic String lookup.
// Number primaryKey = (Number)row.getAttribute("EmployeeId");
Number primaryKey = row.getVisitId();
if (primaryKey.compareTo(empToDelete) == 0)
// This performs the actual delete.
row.remove();
getTransaction().commit();
break; // only one possible selected row in this case
// Always close the iterator when you're done.
deleteIter.closeRowSetIterator();
} // end deleteEmployee
Thanks,
RaviHi
Check this link Getting error in search page search cannot be executed
Regards,
Dilip -
Error: Due to a lock, query cannot be executed at the moment
Hi,
I am getting the following error when executing my query:
Error: Due to a lock, query cannot be executed at the moment
Abort System error in program SAPLRSDRC and form /BIC/ZABC_01
The query has been running fine for the past few months.
Can anyone explain why this error occured and what can I do to avoid this?
Thanks in Advance!!
Regards,
SwapnaHi Swapna,
make sure that the BW system (e.g. another user, process, ...) does not have currently access to the data e.g. like maintain data. In this case the BW sets a lock so that the current user gets exclusively access to the table.
Check the table if there are any locks on it. Call transaction SU53 and check your table for any locks.
Check this thread, perhaps you will find some more information there:
https://forums.sdn.sap.com/click.jspa?searchID=3180428&messageID=1088573
Hope this helps.
Regards,
Marco -
Precautions to be taken while changing the Query read mode in PED system
Dear Experts,
I got a task to change the Query Read mode for more No. of queries in Production system directly itself.
Request you to let me what are the steps to be followed/precautions to be taken while changing the Query Read mode in PED.
one more doubt regarding this.....If i plan to change the Read mode of Query say Q1, how can i come to know weather the Q1 is executing or not executing by that time.
Thanks in advance for valuable response.
Thanks & Regards,
Ramesh - KumarHello,
You can change the query read mode in transaction 'RSRT', here are the steps:
1) Access transaction RSRT and enter the query name
2) Select the 'Properties' option
3) Un-check the 'Info provider' setting next to the 'Read mode' --> This enables you to change the read mode of the query --> Execute
4) Choose the option 'Generate Report' to re-generate the query program
Hope this info helps.
Thanks
Bala -
Changing the query on a view object
I have a view object right now, based on an entity. It is the default view object, so that means the query in the view object is straight forward, it grabs all of the attributes from the table. And there is no WHERE clause.
In reality I only want to show a finite set of rows from my table. Every time a record is changed/edited in this entity and committed, a new row in the database is created with the same information (I'm using CreateWithParams) except for a few columns.
I actually don't really have update on this table, just creation of new rows. But to the user, I want it to 'look' like they are editing something in the table.
Example:
12, 11:32,Thompson, 60 (the user edits this information in an adf table, and a new row is created in the db)
12, 11:55, Thompson, 75
I have a timestamp (see above) field in the database that is used as part of my primary key, so that I know which record is the latest.
When the VO query is run, I want the user to only see the latest row from the db.
12, 11:55, Thompson, 75
So...
I went to my VO, and I changed the WHERE query to add this:
where t1.TimeStamp = (Select MAX(t2.TimeStamp) FROM rcl.x t2 where t1.uid = t2.uid);
Now, this isn't a mysql/sql question. There's actually a better query that I'd rather run, but the VO editor doesn't allow me to change the query itself....
When I save the new WHERE to my VO, run my page again, I get the expected result (showing me only the latest records).
However, when I try and sort on the table in which my data is displayed, I am now getting ORDER BY errors.
I don't want my VO to be read-only sql based. I want to be able to update my table, so I have my VO running off of the entity.
Why doesn't the VO allow me to change the query itself? (Like do a subquery, instead of having my where clause do the work)
Why are order by errors being thrown when I sort on my adf table after changing the where clause in my view?
Hopefully I wasn't too convoluted in the explanation of my problem..
Thanks in advance,
JoelHI Joe,
Regarding your problem you can do one of the following tasks:
1- easily to tuning on your view object, I mean in the tuning page of the view you can set that only return 1 record or 2-3 record fetch not all the record.
in the order by you will order by the timestamp field and descending.
2- you can order by the timestamp descending and in the where clause only set the rownum<2 (will return the last record) you can also set rownum<5 and get the 4 last record etc.
3-editing the view query in the expert mode is not advised at all because of many consequences that you will face.
4- maybe it is not bat that you add a readonly view for the table you mentioned and every time you unpdate the entity just re-execute the read-only view.( this method maybe is good maybe is not it depends on your business logic)
Regards.
Edited by: Amir Khanof on Sep 3, 2010 11:11 PM -
Problem while changing the query of the field in Oracle apps 11.5.10
Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming? -
Error when trying to change the Query in Bex??
Hi Gurus,
I have a query based on infocube. When I am trying to change the query, its giving me the error "This component was edited with a more recent version of Editor. You also have to use the more recent version to edit further. Further processing not possible. Update your front end".
Please help with this.Hi, I am actually stuck here. Can you please let me know which among these is the higher version.
1) Final Release 3.50
Version 3500.3.016
2) Final Release 3.50
Version (Revision 481)
Because it is working fine in the 1st one whereas its throwing that error pop-up in 2nd one(as soon as we select the Change query global definition option) . -
" The query cannot use the cache
Hi , I am testing my query on RSRV and also running it using RSRT but neither RSRV is working and RSRV is throwing a error
" The query cannot use the cache"
How to resolve ?
Tried RSRCACHE and everything looks fine there.Hi,
Thanks for your update.
for this new error try to Generate this query in RSRT.
GOTO -> RSRT -> GENERATE tab is there.
Try it and please update me back.
Thanks & Regards,
Vipin -
How to change the query of detailVO,
Hi,
I have 2 VOs, say HeaderVO and LinesVO, these VOs are used to create a view link - HeaderToLinesVL - HeaderVO is Master VO and LinesVO is DetailVO. These VOs and VL are used in HGrid. Depending on the search criteria entered by user I have to change the query of HeaderVO and LinesVO. I am able to change query of HeaderVO using setQuery, but when setQuery used on LinesVO, it is throwing an exception saying Query can't be changed because it is detail VO. Is there any other way to change the query. Or any other idea to implement this functionality.
Thanks
ShaneedHi,
I have 2 VOs, say HeaderVO and LinesVO, these VOs are used to create a view link - HeaderToLinesVL - HeaderVO is Master VO and LinesVO is DetailVO. These VOs and VL are used in HGrid. Depending on the search criteria entered by user I have to change the query of HeaderVO and LinesVO. I am able to change query of HeaderVO using setQuery, but when setQuery used on LinesVO, it is throwing an exception saying Query can't be changed because it is detail VO. Is there any other way to change the query. Or any other idea to implement this functionality.
Thanks
Shaneed -
I was given an iphone 4 (unlocked) in the UK, but despite my service provider changing the sim I'm still getting no service. Is ther something else that could be locked to a UK network on the phone? Cheers, Ray.
Expanding on what Tim said to make sure it's clear, only the carrier to which the iPhone is locked can authorize unlocking. If Optus is the original carrier, as would seem to be the case, O2 would not be able to unlock it. Only Optus can authorize the unlock, so you'll need to contact them. They say, though, that only the account holder can apply for unlocking, so you might not be able to get it unlocked and will have to work through the person from whom you bought the iPhone.
For more information, see the Optus FAQ on unlocking.
Regards. -
The query cannot be released for OLE DB for OLAP
Hi,
I have created a SAP BI query by query designer,which includes a replacement path variable.Query is working totaly fine.
Now i want to use this query in SAP BO universe, so i have checked the query property Release for OLE DB for OLAP in Advance preoperty of query which allow external use of query.
But after this when i try to run the query its showing error messages-
The query cannot be released for OLE DB for OLAP
Query ZBO_OVERDUE_CUST could not be opened.
>> Row: 37 Inc: CONSTRUCTOR Prog: CL_RSR_OLAP_VAR
Error when generating dataProvider
If i remmove it,my query will work fine.But problem is here,i have to use both thing.
I want repleasement path in query,and because i have to use query in Universe,so i have so allow external use of query.
What should i do,how can i get my desire result.
Thanks,
PiyushI think it may be a limitation due to some of the logic in the BEx query.
http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/content.htm
Release for OLE DB for OLAP
External reporting tools that communicate using the OLE DB for OLAP interface use queries as data sources. If you want to release this query as a data source for external Reporting tools, select Allow External Access to this Query.
Note: Queries containing formulas with the operators %RT, %CT, %GT, SUMRT, SUMCT, SUMGT, and LEAF cannot be released for OLE DB for OLAP. These operators are dependent on how the list is displayed in the BEx Analyzer and the formulas return unexpected values when using OLE DB for OLAP or MDX. You may be able to obtain the required result by selecting constants. For more information, see Selecting Constants.
For more information about using formula operators, see Defining Formulas.
For more information about OLE DB for OLAP, see Mapping Metadata. -
Changing the default port while executing the query
Hi gurus,
Please help me with this problem. When I open a query in BEx Analyzer 3.x, I get this option to launch the query in web browser, now, when I click on this option, there is a new IE explorer that opens up and the address bar shows up the following address.
http://<My Host name>:8100/sap/bw/bex?<The query>
Now, I want to change this port to 8000 by default, what are the settings that I have to change. I tried searching it everywhere, but to no avail, Any help would greatly be appreciated.
Regards,
Sree.I got the answer on my own for this quetion guys,
The function module RSBB_URL_PREFIX_GET is used to generate the URL in BW. That is, when you click "Launch in Web Browser" in the BEx Anaylzer, "Display Query on the Web" in the BEx Query Designer or "Execute in the browser" in the Web Application Designer, the function module is called and this returns the protocol, host, domain, port and service.
The function module essentially runs through three steps:
Determine the settings on the application server and generate the URL for the application server.
Determine the settings relating to the message server, provided that it is used, and replace the host and port of the application server URL with the values for the message server.
Check whether an exception is defined for the URL generated in the previous two steps, and, if required, replace the host and port with the values from the exception.
First, the application server settings are created. If a message server is used, the settings relating to host and port are replaced with the message server settings. If an exception is maintained, the host and port are replaced in turn by the exception.
Hence a simple conclusion to this problem is that you need to maintain an exception or an entry in the table HTTPURLLOC, this can be done via SE11. the following fields appear and use the entry as shown below...
Client <default client>
Sort/Search/Match Sequence (First Match Wins) <Can be Numerical numbers 1 2 3 etc, depending on the priority>
Protocol for URL (TRANSLATE TO UPPER CASE) <http, https etc (Whatever you want to be used in the url)>
Application Key (BSP=/BSP/Namespace/Name) (*=wildcard&UPPER) <I don't know what does this mean and so used *>
Target Domain, (* = Wildcard & UPPER CASE) <Used * here again.>
Host Name with Domain <The hostname u want to appear in the address field>
Port Number <The port number> -
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
} ON COLUMNS,
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
)} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]Hi Ramparasad,
In your query, you add a measures and dimension on Row axis which is not supported in query designer in SSRS. Please use the query below.
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
}ON COLUMNS,
{ [FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]
Regards,
Charlie Liao
TechNet Community Support -
Problem in Changing the Query of LOV using Forms Personalisation
Hi all,
I have a problem while trying to change the LOV of job field in the people--> assignment form. I am trying to do through forms personalisation. I defined all the rquired fields:
Following are the description of fields Idescribed in the form Personalisation:
Trigger Event: WHEN-NEW-FORM-INSTANCE
in actions tab:
10-- Built In--Create Record Group With Query
11-Property----LOV
Target Object--JOBS
Property Name--GROUP_NAME
vALUE--jobs(rECORD gROUP NAME created above)
It is validated successfully,
but when trying to open the form it is giving an error 'cannot create record group jobs'..
Can anybody help me with this..
Thanks and Regards
RajI found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming?
Maybe you are looking for
-
Can I send an iPhoto book to my parents as a PDF? I need their input before I order the ibook.
Can I send an iPhoto book to my parents as a PDF? I need their input before I order the ibook.
-
Best practices for Calling Multiple Business Services in OSB
Hi All, I have a requirement where I need to call multiple business services in OSB. We are presently calling them sequentially in a proxy pipeline. I was wondering if we could accomplish the same task in a better way. Each of the business services a
-
Oracle BPM 11g - Custom view - Design Phase
Hi, Does anyone know if you can create a custom view during the design phase (the way you do it in ALBPM 6.0 and oracle bpm 10g) so that users meeting the filter criiteria can then see the view in the BPM workspace. I don't want all users to create a
-
V$BH View no of index blocks...help
hello guys, i have queried the view V$BH and it seems that there are 0-36 classes of block present.. can one help me with the class of the index blocks that are present in the buffer cache....
-
I am thinking of getting Aperture 3 and I have Photoshop Elements 6. Do they have a lot in common ? Should I stick with what I have or spend the bucks for Elements. I also have IPhoto and IMovie 09.