Multi value parameter issue.

We are facing some issue in SSRS report, whilst running SSRS report it shows as blank in the multi value parameter field when the <all> option is selected(character will be more than 20000). (Report server: MS windows server 2003 and 32 bit(GIRMSA3),
server: MS windows server 2008 and 64 bit)
Same is working in the SSRS Server and Citrix servers both are 32 bit , MS windows server 2003.
1. What is the Maximum Number of Values allowed in a SSRS 2008 Text Parameter Dropdown ? Is it configurable ?
2. What is the Maximum of Length of Select Values in a Text Parameter Dropdown in SSRS 2005 ? Is it configurable ?
Thanks
Vijay
Thanks Rai

Hi Vijay,
This is because of the following patch
“MS11-100 .Net Framework Security Update (KB 2656355)”. Applying this update limits the maximum number of form keys, files and JSON members to 1000 in a request.
Go to the reporting services installation folder.
Go to the report server folder and make a backup of the file “Web.config”. Once you have the backup, open the original file in notepad and add the following entry under the Configuration section:
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000"/>
</appSettings>
Go to the Report Manager folder and again make a backup of the file “Web.config”. Once you have the backup, open the original file in notepad and add the following entry under the appSettings tag:
< add key="aspnet:MaxHttpCollectionKeys" value="10000"/>
Once you do the above steps, you should be able to run the report without any issue.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

SSRS : Reporting Services - Multi-Value Parameter Issue

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,
you speak spanish

Reporting Services Multi Value Parameter

I have an SSRS 2005 report that I want to enable for multi value. However, I always run into the issue with the way it passes multiple values. How exactly do I get a multi-value parameter setup and working on both the report AND SQL side?
I used the MS example of checking the multi checkbox for the parameter and then using a WHERE Column IN (@MultiParam), but this doesn't work. When you select one item, or is it multiple I can't remember, it fails. I really appreciate the help!
Nathon Dalton
Software Developer
Systems Administrator
Network Administrator
Blog: http://nathondalton.wordpress.com

Here's a sample of the SQL stored procedure that I use to get the dataset:
Create
proc [dbo].[spStoredProcName]
@supervisor
varchar(max)
as
begin
create
table #tempSups
Supervisor
varchar(62)
declare
@i
int
select
@i = 0
select
@i =
charindex(',',@supervisor
begin
if @i
<> 0
while @i
>0
begin
insert
into #tempSups
values
(ltrim(rtrim(left(@supervisor,
@i-1))))
select @supervisor
=
right(@supervisor,
len(@supervisor)
- @i)
select @i
=
charindex(',',
@supervisor)
end
end
insert
into #tempSups
values
(ltrim(rtrim(@supervisor)))
From there, simply join your query to the temp table

CASE Statement in Where Condition with Multi Valued parameter in SSRS

Hi All,
I am little confused while using CASE statement in Where condition in SSRS. Below is my scenario:
SELECT
Logic here
WHERE
Date IN (@Date)AND
(CASE
WHEN NAME LIKE 'ABC%' THEN 'GROUP1'
WHEN ID IN ('123456', '823423','74233784') THEN 'GROUP2'
WHEN ABC_ID IS NULL THEN 'GROUP3'
ELSE 'GROUP4'
END ) IN (@GROUP)
So above query uses WHERE condition with CASE statement from @GROUP parameter. I want to pass this parameter as multi- valued parameter and hence I have used CASE statement IN (@GROUP).
For @Date one dataset will pass the available and default values and
for @GROUP parameters, another dataset will pass the available and default values.
But this is not working as expected. Please suggest me where I am making mistake in the query.
Maruthu | http://sharepoint-works.blogspot.com

Hi Maruthu,
According to your description, I create a sample report in my local environment. It works as I expected. In your scenario, if the selected values from the Date parameter contains some of the Date field values, the selected values from the GROUP parameter
contains some of GROUPS (‘GROUP1’,’GROUP2’,’GROUP3’,’GROUP4’) and the corresponding when statement is executed , then the dataset returns the corresponding values.
In order to trouble shoot this issue, could you tell us what results are you get and what’s your desired results? If possible, you can post the sample data with sample dataset, then we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to design SSRS report to filter multi-value parameter?

I developed an RDL which takes a multivalue parameter and I want to set a visibility expression or filter based on this parameter. This parameter uses an "All" value equal to '660E4583-7F29-4D37-8038-5096AE6A1A7F'.
I want to make the main tablix visible if this parameter is set to this uniqueidentifier and invisible otherwise. How can I achieve this either in the tsql dataset or on the report side? I have tried numerous workarounds, but none have worked so far! I've tried
different expressions and datatypes.
Before I tried If/Else statements in the tsql dataset, but most recently I instead added flags to the tsql dataset for each condition and am trying to make this tablix only include the records with the flag matching the parameters chosen. But even this is not
working for me.
Here is sample data:
create table #dummydata
parameter varchar(max),
b varchar(max)
insert #dummydata values('660E4583-7F29-4D37-8038-5096AE6A1A7F','record 1'),('660E4583-7F29-4D37-8038-5096AE6A1vcd','record 2'),('660E4583-7F29-4D37-8038-5096AE6A1v52','record 3')
select * from #dummydata
And my filter expression in the RDL for this tablix is:
=iif(Parameters!Modifier.Value(0)="660E4583-7F29-4D37-8038-5096AE6A1A7F",1,0)
With datatype = integer and value = 1 However, this tablix is invisible with the above even when I choose "All" for the parameter value = default value. How can I make this tablix visible?
Ryan D

Hi Ryan D,
After testing the scenario in my local environment, everything goes well. As per my understanding, I think this issue can be caused by the Available values in the Modifier parameter. Could you tell us the Available values of Modifier parameter in your scenario?
The following scenario in my test is for your reference:
I create a dataset with the sample data you posted.
Add a multi-value parameter named Modifier in the report.
Specify the following values in the Available Values of the parameter (please note that the value “All” should be located in the first place, because we use Parameters!Modifier.Value(0) in the filter):
Label: All                 Value: ="660E4583-7F29-4D37-8038-5096AE6A1A7F"
Label: A                   Value: ="1"
Label: B                   Value: ="2"
Label: C                   Value: ="3"
Drag a table to the design surface, insert parameter and b fields in the table.
Use the same expression as you said to add a filter in the tablix.
We can refer to the following screenshot:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Parameter gets reset and Multi-value parameter doesn't work

Hi
Two Issues:
I've set the value of a Date parameter (Start Date) when moving from the home screen (Report 1) to the next screen (Report 2) as the first day of the current year (DateSerial(Year(Today),1,1). In report 2, if I try to change the Start Date to another date,
it gets reset to the first day of the year. I had the default value set as the first day of the year and even after removing it, the Start Date gets reset.
I've set a multi-value parameter (Area) in Report 1 that collects four integers. I pass Area to Report 2 (through Join (Parameters!Area.value,",")). I also used SPLIT (Join (Parameters!Area.value,","),",") to get the value.
Then, in the data set, I call this parameter as "Select A1,A2,A3,B1,B2,B3 FROM TEST_VIEW WHERE ID IN (?)". But this query throws an error that the query could not be executed. I ran the same query on the server side and it runs fine.
Note:
We cannot reference parameter names as @area for example because the Composite Server doesn't allow that.
Split and Join operate on strings but my parameters are of integer type. Is this an issue?
Please help.

1. Are setting an expression for available values of parameter in report 2? Is the value you pass a valid among the set of values?
2. IN wont work with comma separated values. You need to parse the individual values out using a string parsing udf as a table and then join to that
so in your case you would be like
Select A1,A2,A3,B1,B2,B3 FROM TEST_VIEW t
INNER JOIN dbo.ParseValues (@Area,',')f
ON t.ID = f.Val
ParseValues UDF can be found in below link
http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Multi value parameter sniffing

DECLARE
@w1_p int,
@w2_p int,
@month_p int,
@usdTHISweek_p float,
@usdLASTweek_p float,
@MASS_KIB_p nvarchar(max),
@branch_eq_ccode_p nvarchar(max)
set @w1_p=@w1
set @w2_p=@w2
set @month_p=@month
set @usdTHISweek_p=@usdTHISweek
set @usdLASTweek_p=@usdLASTweek
set @MASS_KIB_p=@MASS_KIB
set @branch_eq_ccode_p=@branch_eq_ccode
select a.* from
(SELECT
case when cat.NAME='MASS' then 'MASS' else 'КИБ' end as mass_kib,
cb.NAME_GEN as oper_typeGEN,
cb.NAME as oper_type,
case when br.name is null then 'не определен' else br.name end as BRANCH_EQ_CCODE,
case when cat.NAME is null then 'Прочие' else cat.NAME end as 'segm',
t.END_PRD_ID,
sum(case when END_PRD_ID=@w1_p then t.FACT_WEEK else 0 end) as 'w1',
sum(case when END_PRD_ID=@w2_p then t.FACT_WEEK else 0 end) as 'w2',
sum(case when END_PRD_ID=@w1_p then t.FACT_MONTH else 0 end) as 'this week_month',
sum(case when END_PRD_ID=@w1_p then t.PLAN_MONTH else 0 end) as 'plan_month',
null as 'month_fact',null as 'month_plan',null as 'month_endprdid',
sum(case when END_PRD_ID=@w1_p then t.FACT_YEAR else 0 end) as 'fact_year',
sum(case when END_PRD_ID=@w1_p then t.PLAN_YEAR else 0 end) as 'plan_year'
FROM [ODS_REPLICA].[stg].[CBClient_week] t
inner join (select * from hnd.OLI_CBMEASID where RB_flag=1) cb on t.CB_MEAS_ID=cb.CB_MEAS_ID and t.BUSINESSTYPE_UK=cb.BUSINESSTYPE_UK
left join stg.client cl on t.CLT_PIN_CD=cl.k_client and t.EN_BRANCH_ID=cl.branch_id
left join hnd.OLI_BRANCH br on t.BRANCH_EQ_CCODE=br.BRANCH_EQ_CCODE
left join hnd.OLI_CAT cat on cl.CAT=cat.CAT
where END_PRD_ID=@w1_p and end_prd_id=@w2_p
group by t.END_PRD_ID,cb.NAME,cb.NAME_GEN,cat.NAME,br.name
union all
SELECT
case when cat.NAME='MASS' then 'MASS' else 'КИБ' end as mass_kib,
cb.NAME_GEN as oper_typeGEN,
cb.NAME as oper_type,
case when br.name is null then 'не определен' else br.name end as BRANCH_EQ_CCODE,
case when cat.NAME is null then 'Прочие' else cat.NAME end as 'segm',
null,
null,null,null,null,
sum(t.FACT_MONTH),
sum(t.PLAN_MONTH),
t.END_PRD_ID,null,null
FROM [ODS_REPLICA].[stg].CBClient_month_since2012 t
inner join (select * from hnd.OLI_CBMEASID where RB_flag=1) cb on t.CB_MEAS_ID=cb.CB_MEAS_ID and t.BUSINESSTYPE_UK=cb.BUSINESSTYPE_UK
left join stg.client cl on t.CLT_PIN_CD=cl.k_client and t.EN_BRANCH_ID=cl.branch_id
left join hnd.OLI_CAT cat on cl.CAT=cat.CAT
left join hnd.OLI_BRANCH br on t.BRANCH_EQ_CCODE=br.BRANCH_EQ_CCODE
where END_PRD_ID=@month_p
group by t.END_PRD_ID,cb.NAME,cb.NAME_GEN,cat.NAME,br.NAME
)a
where a.branch_eq_ccode in (@branch_eq_ccode_p) and a.MASS_KIB in(@MASS_KIB_p)
Hi! I`m having great trouble sniffing multi-value parameter.
The problem is that the query runs in SSMS about 5 seconds and in SSRS about 1 minute.
My multi valued parameters are below. I added fx (="'" + JOIN(Parameters!MASS_KIB.Value, "','") + "'") in the parameters options for the dataset, but the results of the query are blank.
I feel like i`m wrong with all the sp_exec and N'....stuff.
Please help me with that.
Oleg
@branch_eq_ccode_p,@MASS_KIB_p

As I understand the filter condition is not correct.
you need to make it as below for multi parameter to work correctly
CREATE TABLE #branchcodes
BranchCode varchar(50)
INSERT #branchcodes
SELECT Val
FROM dbo.ParseValues(@branch_eq_ccode_p,',')
CREATE TABLE #MASSKIBs
MASSKIB varchar(50)
INSERT #MASSKIBs
SELECT Val
FROM dbo.ParseValues(@MASS_KIB_p,',')
SELECT ...
FROM ..
INNER JOIN #branchcodes bc
ON bc.BranchCode = ac.branch_eq_ccode
INNER JOIN #MASSKIBs mk
ON mk.MASSKIB = a.MASS_KIB
Also see ParseValues here
http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to increase the width of the drop down list box in SSRS multi value parameter

Hi,
I am using SSRS 2012. I have a parameter, which accepts multi value.
The width of the drop down list box is very small, and the user need to scroll to the right to view the complete view of the content in the list box. But, if I don't use multi value then the length is good. Kindly suggest how to I increase the width
of the list box when it set to multi value parameter.
Thanks in advance,
Mahalengam Arumugam

Hi Mahalengam,
After testing the issue in my local environment, I can reproduce it. When the values for a single parameter are too long, the drop-down list of the parameter will automatically enlarge to an appropriate size. While the values for a multiple parameter are
too long, we need to scroll to the right to view the complete view of the content in the list box in SSRS 2008. But in SSRS 2008R2 and SSRS 2012, we can directly drag the black control at the bottom of the list box to control the size.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Hi Katherine,
Thanks for your reply. I understood we need to drag the list box to a maximum size to view the contents.
But, this seems an additional task, i know this is a limitation in the current version of SSRS and hope it will be resolved in the next versions.
Thanks for your efforts,
Mahalengam Arumugam

Passing value to multi value parameter from SSIS using Report server webservice

Hi
I am triggering SSRS report from SSIS(Script task). I am passing parameter values from SSIS package.
So far working fine. Now, I have a report which has 2 parameters. One is single value parameter and the other is multi value parameter.
No issue assigning value to single value parameter. But how can I pass multi value to multi value parameter?
My code as below
ReportExecutionService rs = new ReportExecutionService()
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = _webserviceURL;
rs.LoadReport(_reportPath, null);
ParameterValue[] paramval = new ParameterValue[2];
                        paramval[0] = new ParameterValue();
                        paramval[0].Name = "CountryCode";
                        paramval[0].Value = _countryNames;
                        **paramval[1] = new ParameterValue();
                        paramval[1].Name = "BusinessCode";
                        paramval[1].Value = _businessCode;****
                        rs.SetExecutionParameters(paramval, "en-us");
I am not sure how to pass value to BusinessCode(Multi value parameter)

Hi Rajkm,
In order to pass a multi-value parameter through the Reporting Services Web services, you need to define the same numbers of ParameterValue objects as the number of the values of the multi-value parameter being past into the report. The Name property
of these ParameterValue objects must be specified same to the parameter name.
I found a good FAQ article for this scenario:
How do I pass a multi-value parameter into a report with Reporting Services Web service API?:
http://blogs.msdn.com/b/sqlforum/archive/2010/12/21/faq-how-do-i-pass-a-multi-value-parameter-into-a-report-with-sql-server-reporting-services-ssrs-web-services-api.aspx
Hope this helps.
Elvis Long
TechNet Community Support

OpenDocument.aspx - pass multi value parameter when report type is actx

We are running Crystal Reports XI R2 against a business objects infoview server.
We have been successfully using the OpenDocuments method for opening crystal reports but have run into a snag. When using a multi-value parameter, we can only get it to work when the viewer is set to HTML. Setting to ActiveX prompts us to enter in the parameter values manually.
This address works (using sViewer=HTML):
http://vsx2af0x/businessobjects/enterprise115/infoview/scripts/opendocument.aspx?sType=rpt&sViewer=html&lsMpSiteIDs=[1235880],[1235891],[1235902],[1235913]&sPath=[Development][CGIS][Intranet Mapping][COS_Base]&sDocName=DetailedSite&sRefresh=Y
This address does not work (using sVIewer=actx):
http://vsx2af0x/businessobjects/enterprise115/infoview/scripts/opendocument.aspx?sType=rpt&sViewer=actx&lsMpSiteIDs=[1235880],[1235891],[1235902],[1235913]&sPath=[Development][CGIS][Intranet Mapping][COS_Base]&sDocName=DetailedSite&sRefresh=Y
Any thoughts on the problem?

As I understand what you need is to use LookupSet function.
Suppose if your dataset is like this (for simplicity I'm showing only required fields)
PersonID Project Company
ID1 P1 C1
ID1 P2 C1
ID1 P3 C2
ID1 P4 C2
ID1 P5 C3
If you want to get the full project list for the person just send the PersonID alone and filter using it in the subreport. You can keep the project/company parameters optional in that case and put a default value. This would be the easiest thing.
Now if you want pass the project parameter also you need to pass it like this
=Join(LookupSet(Fields!Person.Value,Fields!Person.Value,Fields!Project.Value,"DatasetName"),",")
This would act like a self lookup and return you full list of projects for the person and then you can use this to set the parameter value in the subreport.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Calling a multi value parameter seems to slow down report

Hi
Nearly all of my datasets use a multi value parameter at present which from testing seems to be causing a long delay.
If I change the dataset to not call the parameter and manually enter the values in this works quicker, the only issue being if I need to add an additional value I need to then do it on multiple datasets rather than one parameter.
A way around this I thought was to do the below which doesn't seem as slow as my original method.
To try better explain I have done this
SELECT
Practice.ibvSalesByJob.JobType
FROM
Practice.ibvSalesByJob
WHERE
Practice.ibvSalesByJob.JobType IN (N'1', N'4', N'5', N'8', N'12', N'17', N'40', N'45', N'60')
I then have a parameter which has default values > dataset > JobType
The actual dataset shown in the report then shows
WHERE
Practice.ibvSalesByJob.JobType IN (@ABSJobs)
Does this make sense or is there a better way of doing what I am trying to do?
Is there a known issue with Report Builder 3.0 and multiple parameters?
Any help/advice appreciated.
Cheers
Cheers Chris

Hi Chris,
According to your description, when you create a multivalued parameter, then specify its values from a dataset, the report is running slower.
In Reporting Services, all datasets within a report will be retrieved when running the report. In your scenario, if you specify the parameter values from a dataset, it’s possible to cause performance issue. If parameter doesn’t have too many values, you
could specify the values for the parameter with specified values in Report Parameter Properties.
Besides, in Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. In your scenario, you could run the report in report server, check the table
Executionlog3 in the ReportServer database to analyze which section take much time. Then you can refer to this article to optimize your report:
Troubleshooting Reports: Report Performance.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Display Blank Tablix when using multi value parameter in SSRS 2008 R2

I have a main report which contains tablix1 and tablix2. Tablix1 is using DataSet1 and Tablix2 is using DataSet2. I have a multi value parameter set up with 71 items to choose from. My company owns 71 convenience stores and what I am doing is comparing sales
for a hard coded date in DataSet1 versus a hard coded date in DataSet2, sales for the same date 1 year ago. Pretty simple, works great when both datasets return data. However, we have a store that we opened up about 4 months ago. The data is displayed
in Tablix1, but since the store did not exist 1 year ago, there is no data for Tablix2. I have tried the "No Row Message" and Repeating Column and Row Headers, etc. When I choose all stores that existed last year, the report runs great. When I choose
a store that existed last year and our new store (#39) that did not, the report messes up. The below image, you can see Tablix1 is good, but Tablix2 should be blank and only show the column headers. Instead it moved Store #40's Tablix1 beside it. If I
run the report and just select store #39, Tablix1 runs as it should and Tablix2 shows The column headers and a blank row. It disappears as soon as I select multiple values.
When you click the next page button, you will see Store 40's Tablix2 where it's Tablix1 should be and then a blank space where Tablix2 should be.

Hi BassMan75,
According to your description, there is a main report with subreport, since the store did not exist one year ago, there is no data for the subreport. You want to show tablix grid even through there is no data in subreport, right?
Report data comes from datasets, if there is no corresponding value in the dataset, only column headers will be displayed in the report, we could not set the rows to blank, so we can’t achieve your goal directly. As a workaround, we can put one text box
in the report with the message: No data for the store. In this way, if there is no data meets search condition, the message will be displayed in the report. Please refer to the following steps:
Click and select the tablix.
In Properties window, in No Rows section, in NoRowsMessage text box, type No data for the store.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

Passing Multi-Value Parameter to a Stored Procedure

Has anyone experienced passing a Parameter (MultiValue) to a Stored Procedure? I am aware that Crystal Passes the Param as an Array. How would you go about handling this within a Stored Procedure???

Hi Daniel
Try as below:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Hope this helps!!!!
Regards
Sourashree

SSRS Multi Value Parameter-- though multiple checkboxes ie values are selected ,data is retrieved only from first selected checkbox

Hello Forum Members,
I have a Multi Valued Parameter as text field.
Input field Sale_Month is of the type Nvarchar in the Database and has 2014.01,2014.02,2014.05 etc.
I can multi select the values but when I run the report only values from first check box are retrieved though I have data for all.
Please advise me.
Sqlquery9

Go to tablix properties, under Filter tab make sure that the Sale_Month filter expression has "IN" operator. Also make sure that the value expression has =Parameter!Sale_Month.Value
Regards, RSingh

Multi value parameter issue.

Similar Messages

Maybe you are looking for