Multihoming with CSS 11500?
Can I do load balancing between two internet ISP's (multihoming), from Internet to Web Server (inside traffic) and from Internal network to Internet (outside traffic) with a Cisco CSS 11500?
you can connect the CSS to multiple ISP.
With the ECMP feature, the CSS will forward the response back to where the connection came from.
However, for outgoing connection, the CSS can't do loadbalancing over multiple ISP.
Regards,
Gilles.
Similar Messages
-
Services with different IP address subnets over CSS 11500 series
Hi all folks!
I have two CSS 11500 series...
In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.
But this servers will be in a different subnet from that today i have for the servers who are configured in the current services of my CSS.
So then the doubt i arises is:
Is correct to add two new services with these servers, but using the IP addressing of the DRS site???, and including on the CSS a static route to this network, (of the DRS) in order to reach them?? is it correct, it will work well?
This would be so....
________________LAN to LAN_____________________
| |
| |
|------SITE A------| |------SITE B------|
[Firewall] ===============IPSEC============= [Firewall]
| |
| |
[CSS-A]-[CSS-B] [SWITCH]
| | | |
[SWITCH] | |
[srvA] [srvB] [srvC] [srvD] [srvE]
So, at [CSS-A] & B, i will put a static route to firewall that know the subnet of site B through the IPSEC tunnel.
So In the CSSs, i will add the new services for the Servers "D" & "E" with the IP address of Site B.
This should be seen as well:
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 [IP FIREWALL]
ip route SITE B [IP FIREWALL]
!************************** SERVICE **************************
service srvA
ip address A.A.A.x
port 8080
service srvB
ip address A.A.A.x+1
port 8080
service srvC
ip address A.A.A.x+2
port 8080
service srvD
ip address B.B.B.y
port 8080
service srvE
ip address B.B.B.y+1
port 8080
I know that this practice is not the most desirable, in fact should use"Basic Global Server Load Balancing Site Redundancy Using the CSS with DNS", but I don't have much time to change the entire environment today, and in this first stage i have to begin with this poor but quick solution that i thought and i wanted to be validated if there is posibliidades this to work
Within their experiences that they say? Will operate?
Thanks in advance!
Regards!
Esteban =)Daniel!
Sorry by delay!
Thank you so much for you time for reply.
You have given me a great help to this doubt!
But..using "source group" let me know..
I can´t undertand the really difference between NAT with ACls as you can see at this link: (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080093dfc.shtml)
and
this other link, using NAT (from the piont 5), (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml)
where the NAT is configured under a method different from the previous one..
So.. for this scenario described above, which would you recommend using? I would think that the second is the most indicated truth? What do you think?
Thanks in advance again!!!
Have nice day!
Regards.
Esteban. -
Load balancing PPTP (Windows 2003) behind CSS 11500
I am wondering if you can load balance PPTP service (TCP port 1723 and GRE) behind CSS 11500, please let me know if anyone as experience with this setup.
Irfan
[email protected]No. I dont think you can load balance PPTP service behind CSS 11500.
-
Hi,
I have a question regarding sorry server configuration on the CSS 11500 series.
Is there a way for the sorry server to ignore the URL path and always send the user traffic to the "root" page (e.g. index.html) of the sorry server web server?
The problem I have is the redirection of the "root" page (url "/") that is configured for the normal traffic is causing the sorry page not to work since the URL path ("/psp/CUSTOMER1/?cmd=login") does not exist on the sorry page web server:
service Sorry-Server
protocol tcp
port 8000
keepalive type tcp
ip address 192.168.2.254
active
service server1
ip address 192.168.2.101
protocol tcp
keepalive type tcp
port 8080
active
service server2
ip address 192.168.2.102
protocol tcp
keepalive type tcp
port 8080
active
owner Customer1
content Content1
vip address 192.168.1.101
port 80
protocol tcp
url "/*"
balance aca
advanced-balance arrowpoint-cookie
flow-timeout-multiplier 6
add service server1
add service server2
primarySorryServer Sorry-Server
active
content Content1-Redirect
redirect "/psp/CUSTOMER1/?cmd=login"
vip address 192.168.1.101
port 80
protocol tcp
url "/"
active
Thanks in advance for your help!
Best regards,
HarryHi again,
During a maintenance window I made the following change and that made things a bit better:
service Sorry-Server
type redirect
keepalive type none
redirect-string "192.168.2.254:8000"
active
However, since the redirect string points to a private address, Internet users are not able to access the URL.
As a work-around I sent the redirect to a new content rule with a public address and then configured a second sorry page server:
service Sorry-Server
type redirect
keepalive type none
redirect-string "sorry.example.com:8000"
active
service Sorry-Server-2
ip address 192.168.2.254
protocol tcp
port 8000
keepalive type tcp
active
owner Customer1
content Content2
vip address x.x.x.x
add service Sorry-Server-2
port 8000
protocol tcp
active
Is there a better way to do this?
Best regards,
Harry -
CSS 11500 url path rewrite and NAT
Hi,
We are evaluating a CSS 11500 and try to configure url path rewrite and NAT, but we have some problems.
What we would like to do is the following:
http://www.example.com/path1 -> http://host1:80
http://www.example.com/path2 -> http://host1:8080
http://www.example.com/path3 -> http://host2:80
The address www.example.com is resolving to a valid internet address, whereas host1 and host2 resolves to private IP addresses.
The client should always see the external url (e.g. http://www.example.com/path1/...) and the CSS should do the necessary translation.
Any help would be very much appreciated!
Regards,
HaraldHello Experts, I'm new with this cisco stuff too(just got it 3 weeks ago), but here is some of my experience with cisco css 11501.
First : Service ServerName, there is a port setting here, but from my experience, I think it is related with KeepAlive option, so, port is alternate way to know if the server alive or not.
Second : When you send request to cisco css, the port option in content port will be the cisco css port to accept request, so, if you send a request to http://vip:8080/, all service must be in the same port too to balance the request, in this case, port 8080, if one service port 80, i'm sure the css will not hit the server.
Third : To solve your problem...
http://www.example.com/path1 -> http://host1:80 (ipA)
http://www.example.com/path2 -> http://host1:80 (ipB)
http://www.example.com/path3 -> http://host2:80
if you are lazy to buy new nic, just set subinterface/ip alias on the host1, and make the webserver only bind to specific address, not to all interface...
O yea, about your path1/path2/path3 -> /, hmm, i'm still asking in this forum about path changing cause until now, i haven't know how to do this, i know about apache rewrite module, and success do this, if only i know about this in cisco css too :-(
I'm sorry if I make mistake, I'm just telling my experience... -
I recently replaced a Local Director with a CSS 11500 (v 8.2). I have an application that uses port 80 to send SOAP heartbeats at 1 minute intervals to a web server to maintain state. For some reason the CSS randomly decides to send RST to the client even though the backend service is active. In other words the the web server is not sending a RST. Is this an issue with flows? Load balancing schema? I did not have this issue with the Local Director.
no. This is not possible.
Gilles. -
Hi everyone,
I need some help about one type of CSS 11500 LOG messages:
OCT 12 07:47:03 1/1 273 WCC-6: Computing slow start parameters for newly activated service index 4
OCT 12 10:25:05 1/1 274 WCC-6: Computing slow start parameters for newly activated service index 3
OCT 12 11:19:49 1/1 275 WCC-6: Computing slow start parameters for newly activated service index 3
OCT 12 11:26:33 1/1 276 WCC-6: Computing slow start parameters for newly activated service index 3
OCT 12 12:20:37 1/1 277 WCC-6: Computing slow start parameters for newly activated service index 3
OCT 12 14:04:32 1/1 278 WCC-6: Computing slow start parameters for newly activated service index 4
OCT 12 14:04:53 1/1 279 WCC-6: Computing slow start parameters for newly activated service index 5
OCT 12 14:05:01 1/1 280 WCC-6: Computing slow start parameters for newly activated service index 4
I was trying to find some explanation about these LOGs, but I didn’t have any success.
My questions are:
1. What does this LOG type mean?
2. Does it signalize some issue on the service?
Thanks a lot for the help!
Regards,
MarkoHi Marko,
Please go through the below link:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/ContRule.html#wpmkr1150644
Just pasting some content. Read the details please.
Slowly Starting Connections on a Service
When you configure a content rule with the least connection (leastconn) load-balancing method, a service on the rule with the fewest connections receives the next request. If you activate a service on this rule, the service may become flooded with requests.
To prevent the flooding of connections on a newly activated or reactivated service, you can enable the slow-start feature on a content rule configured with the leastconn load-balancing method. Through this feature, you can configure:
•The rate that an activated service receives connections. The slow-start rate is applied globally to all leastconn content rules on the CSS. By default, the rate is enabled with a default value of 3. If you disable the rate by setting it to 0, the slow-start feature is disabled on all leastconn content rules configured on the CSS.
Note We recommend that you do not change the slow-start rate default value.
•The maximum time that the service remains in the slow-start process. The slow-start timer sets the number of seconds that the service on a leastconn content rule is in the slow-start process. The timer is applied to a leastconn content rule. By default, the timer is disabled. If the timer is disabled, the slow-start feature is disabled on the rule.
When you enable the slow-start feature on the CSS and a leastconn rule, a service on the rule enters the slow-start process when you:
•Add and activate a service to the rule
•Reactivate a service after suspending it on the rule
•Activate the rule
When you activate a rule, it starts to load balance the connections on its services. The service with the least number of connections is selected to enter the slow-start process.
When a rule has only two services, only one service can enter the slow-start process. When the rule has more than two services, a newly activated service can enter the slow-start process when one of the services is currently in the slow-start process and the other services are out of the slow-start process.
A service in the slow-start process slowly continues to receive connections until either the slow-start timer expires or its connections equal the number of connections on the other active services of the rule. Then, the service exits the slow-start process and starts receiving connections as it normally would.
Regards,
Kanwal -
CSS 11500 booting only to Offline DM mode
Hello,
I setup a new CSS 11500 this morning, going through the steps of setting up the administrator password, IP address for the management console etc, but when continuing the CSS went straight to the offline DM menu. Now rebooting the unit it clears all the tests, loads the operational flash but continues to go straight to the DM menu regardless whether you press <y> or not at the prompt.
I also tried connecting via telnet to the management console but get connection refused.
Any ideas on why the CSS boots only to the DM menu?
Thanks in advance,
- TrevorTrevor,
once if offdm, attached a laptop with FTP Server on it on the management port.
Then from offdm, you can configure the CSS to boot from FTP server.
Once the box is up and running again, make sure you have an image on disk.
Finally, you don't need a PCMCIA flash and no you should no have received one.
Regards,
Gilles. -
CSS 11500 Responds for any Port
Hopefully this is an easy question but I am having a heck of a time finding an answer.
We have multiple CSS 11500 clusters. We have found that on all of them, if you try to open a session on any port to an IP address on the backend of the CSS, the CSS will complete the SYN-ACK-ACK session with the client. This happens regardless of whether there is something on that IP address or not.
Example:
Front Back
10.1.1.0/24 --- CSS --- 10.2.2.0/24
Coming from any IP, if I try to telnet to ANY IP on the 10.2.2.0 subnet (whether or not there is an actual server on that IP) on any port (whether or not that port is open or not), the CSS will complete the initial connection. I have verified this using telnet to numerous ports and viewing the transaction in a packet capture.
Is there any way to shut this off? This is causing some licensing issues for our security folks that use a vulnerability scanner licensed on number of IP addresses.
Thanks for any input!Thanks for your reply Marvin.
We actually use ACLs already - primarily for purposes of allowing backend servers to reach load-balanced services on the CSS they sit behind or for reverse proxy services.
I have tried specifically blocking access to backend IP addresses that are not used but oddly enough the CSS still replies and opens the initial TCP session just like any other.
I think I'm going to have to open a TAC case on this one. If they can't answer it, I may be forced to put all of these behind firewalls - which is doable but not ideal. -
Changing Max-Connections in CSS 11500
I have an architecture with two 11500 in active-passive mode and receive 800 connections every 5 minutes.
Could appear secondaries effects if i change the default of max-connections in CSS 11500 for example to 1200?
One of the risks i want to avoid is with this change, the CSS could be crashdown because of the drop of connections..Good morning,
Could you please let me know what is the exact parameter you are talking about?
From what you described, I believe you may be referring to the "max connections" parameter configured under the services. This command just limits the number of concurrent connections that are allowed on a specific real server to ensure that the server itself doesn't get overloaded. Increasing this limt would not have any negative effect on the CSS itself, but, since you are allowing more simultaneous connections on the server, you may experience resource issues on the server itself. -
Problem with CSS in page I have written [SOLVED]
There is a php page I have created at work which works fine with Firefox 3.6.
In one specific page Firefox 4 does not show correctly a table with CSS.
I tried to remove the css and just have the table with no styling but the problem persists.
the php file is this:
<pre><nowiki><html>
<head>
<title>Pending Issues Close Case</title>
<style type="text/css">
#blinking {text-decoration: blink; text-align:left; color:#FF0000;}
body {
background-image:url('on2.jpg');
background-repeat:no-repeat;
background-position:700 50;
background-attachment:fixed;
#efms
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
border-collapse:collapse;
#efms td, #efms th
font-size:1em;
border:1px solid #98bf21;
padding:3px 7px 2px 7px;
#efms th
font-size:1.1em;
text-align:left;
padding-top:5px;
padding-bottom:4px;
background-color:#A7C942;
color:#ffffff;
#efms tr.alt td
color:#000000;
background-color:#EAF2D3;
</style>
<link rel="stylesheet" type="text/css" media="all" href="jsDatePick_ltr.min.css" />
<script type="text/javascript" src="jsDatePick.min.1.3.js"></script>
<script type="text/javascript">
window.onload = function(){
new JsDatePick({
useMode:2,
target:"date_of_problem",
dateFormat:"%Y-%m-%d"
new JsDatePick({
useMode:2,
target:"closed_date",
dateFormat:"%Y-%m-%d"
function checkEmpty() {
var date_of_problem = document.save_entries.date_of_problem.value;
var hour_of_problem = document.save_entries.hour_of_problem.value;
var min_of_problem = document.save_entries.min_of_problem.value;
var reported_to = document.save_entries.reported_to.value;
var problem_description = document.save_entries.problem_description.value;
var close = document.save_entries.close.value;
var closed_date = document.save_entries.closed_date.value;
var closed_hour = document.save_entries.closed_hour.value;
var closed_min = document.save_entries.closed_min.value;
var ok = "true";
var why = "";
var ok2 = "true";
var tmp1 = date_of_problem.split("-");
var date1 = new Date(tmp1[0], tmp1[1], tmp1[2], hour_of_problem, min_of_problem);
var tmp2 = closed_date.split("-");
var date2 = new Date(tmp2[0], tmp2[1], tmp2[2], closed_hour, closed_min);
if (date_of_problem.length == 0) {
ok = "false";
why += "Date of problem is empty\n";
if (reported_to.length == 0) {
ok = "false";
why += "Reported to is empty\n";
if (problem_description.length == 0) {
ok = "false";
why += "Problem description is empty\n";
if (closed_date.length == 0 && close == "Yes") {
ok = "false";
why += "Closed date is empty\n";
if (date2 < date1) {
ok = "false";
why +="Closed date cannot be earlier than problem date\n";
if (ok == "true") {
return true;
else {
alert(why);
return false;
</script>
</head>
<body>
<?php
session_start();
if (!isset($_SESSION['pending_user'])){
header("location:main_login.php");
if ($_GET['entry'] == "" || $_GET['entry'] == NULL)
header("location:view_entries.php");
$id = $_GET['entry'];
function get_entry($id) {
$mysql_host = "localhost";
$mysql_user = "portal";
$mysql_pass = "portal";
$db_name = "pending_issues";
$entries_table = "entries";
mysql_connect("$mysql_host", "$mysql_user", "$mysql_pass") or die("cannot connect to DB" . mysql_error());
mysql_select_db("$db_name")or die("cannot select DB" . mysql_error());
mysql_query("set names 'utf8'")or die("fook!" . mysql_error());
$entry_query = "SELECT * FROM $entries_table WHERE id='$id'";
$entry_data = mysql_query($entry_query) or die("Cannot execute query");
$entry_row = mysql_fetch_array($entry_data) or die("Cannot fetch row");
$date_of_problem = $entry_row['date_of_problem'];
$time_of_problem = $entry_row['time_of_problem'];
$hour_of_problem = strtok($time_of_problem, ":");
$min_of_problem = strtok(":");
$resp_technician =$entry_row['resp_technician'];
$reported_to = $entry_row['reported_to'];
$description = $entry_row['problem_description'];
$closed_date = $entry_row['closed_date'];
$closed_time = $entry_row['closed_time'];
$closed_hour = strtok($closed_time, ":");
$closed_min = strtok(":");
$closed_by = $_SESSION['pending_user'];
echo '<h2><font color="#A7C942">Welcome, ' . $_SESSION['pending_user'] . '</font></h2>';
echo '<table id="efms">';
echo '<tr class="alt">';
echo '<td>';
echo '<br><a href=index.php>Home</a><br><br>';
echo '</td>';
echo '<td>';
echo '<br><a href=view_entries.php>View entries</a><br><br>';
echo '</td>';
echo '<td>';
echo '<a align="center" href="logout.php">Log out</a><br>';
echo '</td>';
echo '</tr>';
echo '</table>';
echo '<br>';
echo '<form name="save_entries" action="save_entries.php" method="post" onSubmit="return checkEmpty();"';
echo '<table id="efms">';
echo '<tr>';
echo '<th>';
echo 'Problem date';
echo '</th>';
echo '<td>';
echo '<input id="date_of_problem" name="date_of_problem" type="text" value="' . $date_of_problem . '">';
echo '<input type="hidden" name="entry" value="' . $id . '">';
echo '</td>';
echo '</tr>';
echo '<tr>';
echo '<th>';
echo 'Problem time';
echo '</th>';
echo '<td>';
//echo '<input name="time\_of\_problem" type="text" value="' . $time_of_problem . '">';
echo_hour($hour_of_problem, "hour_of_problem");
echo ":";
echo_min($min_of_problem, "min_of_problem");
echo '</td>';
echo '</tr>';
echo_reported_to($reported_to);
echo '<tr>';
echo '<th>';
echo 'Problem description';
echo '</th>';
echo '<td>';
echo '<textarea name="problem_description" rows="5" cols="40">' . $description . '</textarea>';
echo '</td>';
echo '</tr>';
echo '<tr>';
echo '<th>';
echo 'Closed date';
echo '</th>';
echo '<td>';
echo '<input name="closed_date" id="closed_date" type="text" value="' . $closed_date . '"> ';
echo 'Close case? ';
echo '<select name="close">';
echo '<option>Yes</option>';
echo '<option>No</option>';
echo '</select>';
echo '</td>';
echo '</tr>';
echo '<tr>';
echo '<th>';
echo 'Closed time';
echo '</th>';
echo '<td>';
echo_hour($closed_hour, "closed_hour");
echo ":";
echo_min($closed_min, "closed_min");
echo '</td>';
echo '</tr>';
//~ echo '<tr>';
//~ echo '<th>';
//~ echo 'Closed by';
//~ echo '</th>';
//~ echo '<td>';
//~ echo '<input id="resolve_date" name="resolve_date" type="text" value="' . $closed_by . '">';
//~ echo '</td>';
//~ echo '</tr>';
echo '<tr>';
echo '<th>';
echo 'Submit';
echo '</th>';
echo '<td>';
echo '<input name ="submit" type="submit">';
echo '</td>';
echo '</tr>';
echo '</table>';
echo '</form>';
mysql_close();
function echo_hour($hour, $name) {
echo '<select name="' . $name . '">';
for ($i = 0; $i < 24; $i++) {
if ($i < 10)
$temp_hour = "0" . $i;
else
$temp_hour = $i;
if ($hour != $temp_hour)
echo '<option>' . $temp_hour . '</option>';
if ($hour == $temp_hour)
echo '<option selected>' . $temp_hour . '</option>';
echo '</select>';
function echo_min($min, $name) {
echo '<select name="' . $name . '">';
for ($i = 0; $i < 60; $i++) {
if ($i < 10)
$temp_min = "0" . $i;
else
$temp_min = $i;
if ($min != $temp_min)
echo '<option>' . $temp_min . '</option>';
if ($min == $temp_min)
echo '<option selected>' . $temp_min . '</option>';
echo '</select>';
function echo_reported_to($reported_to) {
echo '<tr>';
echo '<th>';
echo 'Reported to';
echo '</th>';
echo '<td>';
//echo '<select name="reported_to" value="' . $reported_to . '">';
echo '<select name="reported_to">';
if ($reported_to == "IT") {
echo '<option selected>IT</option>';
echo '<option>NetEng</option>';
echo '<option>VTT</option>';
echo '<option>NOC</option>';
if ($reported_to == "NetEng") {
echo '<option>IT</option>';
echo '<option selected>NetEng</option>';
echo '<option>VTT</option>';
echo '<option>NOC</option>';
if ($reported_to == "VTT") {
echo '<option>IT</option>';
echo '<option>NetEng</option>';
echo '<option selected>VTT</option>';
echo '<option>NOC</option>';
if ($reported_to == "NOC") {
echo '<option>IT</option>';
echo '<option>NetEng</option>';
echo '<option>VTT</option>';
echo '<option selected>NOC</option>';
echo '</select>';
echo '</td>';
echo '</tr>';
get_entry($id);
?>
</body>
</html>
</nowiki></pre>
<br />
The problem is for the table in line 188.
it should look like this:
http://img571.imageshack.us/img571/5183/shouldlooklike.png
but instead it looks like this:
http://img860.imageshack.us/img860/323/lookslikethis.png
The same problem appears in IE.
Thank you,Please do not consider my previous post as I found out that it was a coding error, a forgotten ">"
Thank you. -
Problem with css processing in Firefox8 on Win7.
Hi guys. I have a problem with css processing in Firefox8 on Win7. I need to make div which width and left css properties should be dynamically changed. Inside this div i have an swf object. When i change width and left css styles for my div, it jumps on the page, but other browsers render that well. What can you suggest to fix this problem? Thanks
A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25 -
Using templates with css in mx
Hi,
I'm sure I'm being stupid but it's driving me insane - I'm
weaning myself off table based layout and using css (for the first
time) in mx. I'm (finally) happy with my stylesheet and how it's
all looking but can't seem to use css with a template - when I save
the page as a template and preview the style sheet does not seem to
be attached.
Any help MUCH appreciated,
Katy> Good to know about mx as I was thinking about upgrading
to 8 - does it
> make
> like easier with css?
Very definitely!
Good grief - your stylesheet is ... big. Usually so many
custom classes
mean that the stylesheet is WAY overengineered.....
I'll take a look though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"katyoj" <[email protected]> wrote in
message
news:[email protected]...
> Thanks -
>
> I've uploaded it here :
>
>
>
http://kateortonjohnson.bulldoghome.com/pages/kateortonjohnson_bulldoghome_com/i
> ndex.html
> & have attached the style sheet to the message
>
> Good to know about mx as I was thinking about upgrading
to 8 - does it
> make
> like easier with css?
>
> Anyway thanks again
>
> Kate
>
> /* CSS Document */
>
> BODY {
> margin:0px;
> padding:0px;
> font-family: arial, helvetica, sans-serif;
> font-size: 11px;
> color: #000;
> background: #FFF;
> }
>
> /* Link properties */
>
> A:link {
> color: #333;
> text-decoration: none;
>
> }
>
> A:visited {
> color: #913c87;
> text-decoration: none;
>
> }
>
> A:active {
> color: #913c87;
> text-decoration: none;
>
> }
>
> A:hover {
> color: #913c87;
> text-decoration: none;
>
> }
>
> /* Main text headings */
>
> h1
> {font-family: tahoma, Arial, Helvetica, sans-serif;
> font-size:11px;
> color:#333;
> text-decoration:none;
> font-weight:bold;
> margin:3px 5px 5px 3px;}
>
> h2
> {font-family: tahoma, Arial, Helvetica,
sans-serif;font-size:11px;
> color:#154669;
> text-decoration:none;
> font-weight:bold;
> margin:0px 5px 5px 3px;
> padding:5px 0px 0px 5px;}
>
> h3
> {font-family: tahoma, Arial, Helvetica, sans-serif;
> font-size:11px;
> color:#525E6A;
> text-decoration:none;
> font-weight:bold;
> margin:5px 5px 5px 3px;
> text-align:right;
> }
>
> /* Footer text */
>
> .footertext {
> font-family: tahoma, Arial, Helvetica, sans-serif;
> margin:0px;padding:15px 0px 5px 0px;
> font-size:10px;
> color:#666;
> }
>
> /* Titles */
>
> .t3 {
> font-family:tahoma, Arial, Helvetica, sans-serif;
> font-size:20px;
> color:#154669;
> text-decoration:none;
> font-weight:bold;
> }
> .t2 {
> font-family: tahoma, Arial, Helvetica, sans-serif;
> font-size:14px;
> color:#96968A;
> text-decoration:none;
> font-weight:bold;
> }
>
> /* Main body */
>
> .maincontent {
> border-top-style
otted;
> border-top-width:1px;
> border-top-color:#989898;
> margin:3px 10px 30px 0px;
> padding:0px 10px 5px 10px;
> font-family: arial, helvetica, sans-serif;
> font-size: 11px;
> color:#333;
>
> } .maincontent img {float:left;margin:5px 5px 5px 0px;}
>
> .maincontent2 {
> border-top-style
otted;
> border-top-width:1px;
> border-top-color:#989898;
> margin:3px 220px 0px 0px;
> padding:0px 10px 5px 10px;
> font-family: arial, helvetica, sans-serif;
> font-size: 11px;
> color:#333;
> }
>
> .maincontent2 img {float:right;margin:5px 0px 5px 5px;}
>
> .lwrap {
> width:182px;
> margin-top:15px;
> margin-bottom:0px;
> margin-right:auto;
> margin-left:auto;
> padding:0px;
> }
>
>
> /* Left content */
>
> .lcontent {
> border-left-style:solid;
> border-left-color:#C5C5C5;
> border-left-width:5px;
> width:172px;
> margin:0px 0px 0px 0px;
> font-family: Arial, Helvetica,
sans-serif;font-size:11px;
> color:#666666;
> text-decoration:none;
> text-align:left;
> font-weight:normal;
> padding:5px 3px 10px 5px;
> background-color: #EEE;
> }
>
> .leftshadow {
> width:182px;
> height:6px;
> padding:0px;
> margin-top:0px;
>
> }
> .leftshadow img {padding:0px;margin:0px;float:right;}
>
> .separator {
> border-top-width:1px;
> border-top-style
otted;
> border-top-color:#989898;
> margin-right:5px;
> margin-left:5px;
> margin-top:10px;
> }
>
> /* News boxes */
>
> .newsheader{
> background-image:url(images/left_subh.gif);
> background-position:top;
> background-repeat:no-repeat;
> width:182px;
> margin-left:auto; margin-right:auto;
margin-top:15px;margin-bottom:0px;
> height:17px;
> text-align:right;
> padding:1px 5px 0px 0px;
> font-family: tahoma, Arial, Helvetica,
sans-serif;font-size:10px;
> color:#333;
> font-weight:bold;
> }
> .newscell{
> background-color:#EEE;
> width:182px;
> margin-left:auto; margin-right:auto;
margin-top:-1px;margin-bottom:0px;
> min-height:30px;
> font-family: Arial, Helvetica, sans-serif;
> font-size:11px;
> color:#666;
>
> }
>
> .newscell p {padding:5px 5px 15px 10px;margin-top:0px;}
>
> /* Right content */
>
> .rcontent {
> background-color:#EEE;
> width:168px;
> margin-left:auto;
> margin-right:auto;
> border-left-style:solid;
> border-left-width:5px;
> border-left-color:#C5C5C5;
> min-height:30px;
> margin-top:18px; margin-bottom:0px;
> font-family: tahoma, Arial, Helvetica, sans-serif;
> font-size:10px;
> color:#666;
> padding:5px 3px 10px 5px;
> text-align: left;
> }
>
> .rightshadow {
> text-align:right;
> width:168px;
> height:7px;
> padding:0px;
> margin-top:0px;
> margin-bottom:15px;
> float:right;
> }
> .rightshadow img {padding:0px;margin:0px;float:right;}
>
> /* Bullet list */
>
> ul {
> list-style-image:url(images/bullet.gif);
> list-style-type:none;
> }
>
> p img {margin-left:5px;}
>
>
> #wrap{
> margin:0px;
> padding:0px;
> width:100%;
> }
>
> /* Header section */
>
> #header{
>
> background:#EEE;
> margin:0px 0px 0px 0px;
> font-size: 11px;
> font-family : Verdana, Arial, Helvetica, sans-serif;
> color : #000000;
> border-bottom: solid #C5C5C5;
> }
>
> /* Top navigation */
>
> #topnav ul
> {
> padding-left: 0;
> margin-left: 5px;
> margin:0px 0px 0px 0px;
> background-color: #913c87;
> color: White;
> float: left;
> width: 100%;
> font-family: arial, helvetica, sans-serif;
> font-size: 11px;
> font-weight: bold;
> height: 18px;
> }
>
> #topnav ul li { display: inline; }
>
> #topnav ul li a
> {
> padding: 0.2em 1em;
> background-color: #913c87;
> color: White;
> text-decoration: none;
> float: left;
> border-right: 1px solid #EEE;
> }
>
> #topnav ul li a:hover
> {
> background-color: #C5C5C5;
> color: #fff;
> }
>
>
> /* Left positioning */
>
> #left {
> width:191px;
> margin:0px 0px 10px 0px;
> padding:0px 0px 20px 0px;
> background-color:#EBE8DE;
> border-right-width:3px;
> border-bottom-width:3px;
> border-left-width:5px;
> border-top-width:0px;
> border-style:solid;
> border-right-color:#EFEEEE;
> border-bottom-color:#EFEEEE;
> border-left-color:#fff;
> float:left;
> min-height:15px;}
>
> /* Right positioning */
>
> #right {
> margin-left:196px;
> background-color:#fff;
> min-height:30px;
> text-align:left;
> padding:10px 10px 15px 15px;
> min-width:560px;
>
> }
>
> /* Footer positioning */
>
> #footer {
> background-image:url(images/footer2.gif);
> height:55px;
> margin:0px 0px 0px 0px;padding:0px;
> width:100%;
> min-width:760px;
> overflow:hidden;
> clear:both;
> }
>
> #footer img {padding:0px;margin:0px;float:left;}
>
> #footer a {
> text-decoration:none;}
>
> /* Right positioning */
>
> #rightcol {
> width:180px;
> float:right;
> min-height:30px;
> background-color:#fff;
> margin:0px 0px 0px 20px;
> padding:0px;
> text-align:center;
> }
> /** BOX3 */
>
> #box3 {
> clear: both;
> margin-top: 20px;
> padding: 10px 0px;
> }
>
> #box3A {
> float: left;
> width: 200px;
> padding: 0px 13px 0px 43px;
> background: url(/csstemplatetts/images/homepage20.gif)
repeat-y right
> top;
> }
>
> #box3B {
> float: left;
> width: 200px;
> padding: 0px 50px 0px 11px;
> }
>
> #stretch {width:760px;height:1px;clear:both;margin:0px
0px 10px
> 0px;padding:0px;}
> -
How to print a html document in landscape mode with css
Hi ,
below is my code that i need to print in landscape mode by defualt with css. is there any way to do this
<html><head><style type="text/css">
table.automatic {table-layout:fixed; width:100%; border-collapse: collapse; word-wrap:break-word;}TR.head{font-family: verdana; font-size: 10pt; vertical-align: top ; color: #ffffff; background-color: black; font-weight: bold; }TR.data{font-family: verdana; font-size: 8pt; vertical-align: top}</style></head><body><table width="100%" border="0" cellspacing="0" cellpadding="4"><tbody><tr><td></td><td align="center"><font size="2" style="verdana"><b>EMERGENCY ICE Installs by Manager And Production Install Date Range</b></font><br><td></td><table width="100%" border="0" cellspacing="0" cellpadding="4"><thead><tr><td width="74%" align="center"><font size="1" style="verdana"><b>From:</b>09/01/07</font><font size="1" style="verdana"><b>  To:</b>01/08/08</font></td></tr></thead></table></td></tr></tbody></table><br></br>
<table border="1" class="automatic"><thead><tr class="head"><td width="8%">Manager</td><td width="5%">ICE # </td><td width="10%">Plan Prod Install Date</td><td width="10%">Doc Status</td><td width="10%">Doc Title</td><td width="7%">Owner</td><td width="5%">Risk Desc</td><td width="4%">AS/400</td><td width="4%">Unix</td><td width="4%">Win Srv</td><td width="4%">Win Dsk</td><td width="4%">Vax</td><td width="5%">Target Loc</td><td width="10%">No Chg Risk Desc</td><td width="15%">Brief Chg Desc</td></tr></thead><tbody>
<tr class="data"><td rowspan="12" width="5%">Randal Hockenberry</td><td width="8%">16926</td><td width="10%">Dec 31,2007</td><td width="10%">Pending Manager-Business Review</td><td width="10%">AUTO APPROVE</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="5%">TEST</td><td width="10%">TEST</td><td width="15%">TESTzxdcxvsrfdgdsgfdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff</td></tr>
<tr class="data"><td width="8%">16933</td><td width="10%">Dec 28,2007</td><td width="10%">Pending Non-QS Testing</td><td width="10%">SR</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="5%">XC</td><td width="10%">DFV</td><td width="15%">CX</td></tr>
<tr class="data"><td width="8%">16927</td><td width="10%">Dec 28,2007</td><td width="10%">Pending Risk Review</td><td width="10%">AUTO APPROVAL TEST</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="5%">AUTO</td><td width="10%">AUTO APPROVE</td><td width="15%">AUTO APPROVE</td></tr>
<tr class="data"><td width="8%">15926</td><td width="10%">Nov 27,2007</td><td width="10%">Pending Code Review</td><td width="10%">CM Install LEVEL 3 QS will test</td><td width="7%">Gary Zhong</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="4%">Y</td><td width="5%">pitt99</td><td width="10%">testing the app</td><td width="15%">CM Install LEVEL 3 QS will test</td></tr>
<tr class="data"><td width="8%">15712</td><td width="10%">Nov 22,2007</td><td width="10%">Rejected</td><td width="10%">Test Documentation Request</td><td width="7%">Autumn Priddy</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="5%">x</td><td width="10%">none</td><td width="15%">run-through for documentation purposes</td></tr>
<tr class="data"><td width="8%">16029</td><td width="10%">Nov 21,2007</td><td width="10%">Rejected</td><td width="10%">Contractor</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="5%">Windows</td><td width="10%">testing</td><td width="15%">Testing</td></tr>
<tr class="data"><td width="8%">16030</td><td width="10%">Nov 19,2007</td><td width="10%">Rejected</td><td width="10%">Contractor</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="5%">Windows</td><td width="10%">testing</td><td width="15%">Testing</td></tr>
<tr class="data"><td width="8%">15840</td><td width="10%">Nov 10,2007</td><td width="10%">Pending Follow Up Review</td><td width="10%">SMS Install LEVEL 3</td><td width="7%">Stephen Sciullo</td><td width="5%">Low</td><td width="4%">Y</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="5%">pitt88</td><td width="10%">system testing</td><td width="15%">SMS Install LEVEL 3</td></tr>
<tr class="data"><td width="8%">15719</td><td width="10%">Nov 08,2007</td><td width="10%">Pending Test Install</td><td width="10%">CM Install LEVEL 1 pitt3/col3</td><td width="7%">Stephen Sciullo</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="5%">pitt88</td><td width="10%">testing</td><td width="15%">testing</td></tr>
<tr class="data"><td width="8%">14815</td><td width="10%">Nov 03,2007</td><td width="10%">Rejected</td><td width="10%">test</td><td width="7%">Stephen Sciullo</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">Y</td><td width="4%">N</td><td width="5%">pitt2</td><td width="10%">test</td><td width="15%">test</td></tr>
<tr class="data"><td width="8%">14915</td><td width="10%">Nov 01,2007</td><td width="10%">Pending Follow Up Review</td><td width="10%">Contractor</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="5%">windows</td><td width="10%">test</td><td width="15%">Test</td></tr>
<tr class="data"><td width="8%">14816</td><td width="10%">Oct 31,2007;Nov 01,2007;Nov 02,2007</td><td width="10%">Production Install Complete</td><td width="10%">Contractor</td><td width="7%">Padma Chirumalla</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="4%">N</td><td width="5%">windows</td><td width="10%">test</td><td width="15%">test</td></tr>
<tr></tr>
<tr class="data"><td rowspan="1" width="5%">Linda Humm</td><td width="8%">16034</td><td width="10%">Dec 06,2007</td><td width="10%">Pending Production Install</td><td width="10%">CM Install LEVEL 1 pitt3/col3</td><td width="7%">Randal Hockenberry</td><td width="5%">Low</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">N</td><td width="4%">Y</td><td width="5%">pitt88</td><td width="10%">testing</td><td width="15%">testing</td></tr>
<tr></tr>
</tbody></table><body></html>
Thanks,Why are you asking a CSS question in a Java/JSP/JSTL forum? I would rather use a CSS forum for that. That HTML code is unnecessary too. Just post relevant code only, such as that CSS snippet.
Anyway, it may differ per web browser if this page rule will be picked up and it may also be a client side setting regarding printer settings. Nothing to do here. -
Chart color change with CSS in DS 1.3
Hi together,
Did somebody now a solution with CSS in the design studio 1.3, to change the color from the chart-bar or the chart-pie (like PrintScreen)? Or is this planned in the DS Version 1.4?
We found only a solution to change this setting for the chart. Not the color of the bar or pie.
We would like to set this in the CSS because it is a Style guide rule of the company.
Best Regards
GabrielDo you mean use CSS for your chart? See response from David Gyurasz Styling a chart in Design Studio
If not I recommend searching SCN for your answer - I searched "CSS color design studio chart" and 234 searches were found.
Maybe you are looking for
-
How to get the last seven days for out put of present day
Hi Experts, we developed one query for 3 years data 1.user enter the current date (21-03-2014) but out put value should be last seven days (21-03-2014 - 7) (last one week data only) 2.some times user will enter the (20-03-2014 ) but out put value sho
-
Error with running JAR files created with NetBeans
I have been having difficulty running the JAR files that NetBeans compiles. When I run my code from NetBeans, it always works just fine, but when I try to run the compiled JAR I get the following errors: Exception in thread "main" java.lang.Unsupport
-
PC constant disconnect and strange log entrys
A few weeks ago I upgraded my PC (new motherboard, psu, case) and ever since I have had problem with my USB wi fi modem. Now it will work for a few mins then kinda disconnect for a few seconds then come back when this happens all web pages stop loadi
-
OBIEE Facts at different levels.
Hi, I am bringing columns from three tables: Two facts and one Dimension table to create a OBIEE Report. The fact tables Workforce Event Fact and Employee Daily Snap Fact are at different levels, but both of them have proper joins with Dimension Empl
-
Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Plea