Multimode transport for procurement
Hi friends. I am a MM consultant. I need your opinion on the folowing issue.
The client requirement is as follows.
1. They procure coals and ore from mines and ports. For this the Transport of raw material is a significant process in their business. The transport is arranged by the client (and not by their vendor).
2. Often multimode transport is used..like sea, then rail, then road.
3. Separate full fledged PO need to be given to the transporters.
4. Service tax and other relevant taxes are applicable on the transport activities.
5. All these transport cost need to be inventorised (to load on the material procured).
6. A number of other requirements exist due to which I am not willing to use Delivery condition (like FRB1) in main PO and use transporter number for this condition to map this scenario.
I am thinking of using the transportation module to map the scenario. That means
PO -> Inbound delivery -> Shipping -> GR w.r.t. the inbound delivery
My question is
1. Will the cost of transportation be loaded on the material if I use the above cycle?
2. Can I use the above cycle if WM (or lean WM) is not implemented?
Thanks in advance.
You can implement transportation module without WM.
1)Maintain routes in the configuration.
2)Create a delivery document and aginst a delivery document create a shipment document.
3)Create a service PO with value limit on the frieght vendor.Mention all the suitable conditions on it.maintain delivery date in month in the service PO.this way u can use 1 service PO for entire month.
4) Create a shipment cost document against shipment document .
5) here you can specify transportation cost in the condition tab.
6)Check indicator "transfer" to transfer the cost
7) Once the cost is transferred a service entry sheet will be created automatically.
8)Do invoice by MIRO against service PO to pay to the transporter
Similar Messages
-
Transportation chain / multimode transport
Dear All,
1) I got lots of documents for Transportation chain / multimode transport but not able to configure it. Could you please share me the steps involves and brief about configuring Multimode transport such as how many shipment document types / shipment cost document types needs to define etc.
2) In Shipment cost and Item category definition we assign the cost type such as Shipment header, shipment leg etc. Why do we assign this? What will be effect if I maitain each and every option
3) In the configuration Define Shipment cost relevancy to shipment type, we can select the check box Header, Leg, Loading point etc. why we use this setting? What will be the effects
Please let me know on above points
Thanks & Regards
Rahul Mirashi1) One Shipment Document Type and One Shipment Cost type is enough
2) In IMG path Define Transportation Connection Points, you have to define whether a shipment is related to Load Transfer, Border crossing etc., This Transportation Connection Point should be assigned in the next IMG Define Routes and Stages. Based on this, when you create a shipment document via VT01N, multiple line items would flow under the tab "Stages". Ideally, this would be applicable in case of exports shipment where you would have stages like Plant to Port, Port to importing country's port, customer destination and for each of these, you have to key in different vendor codes.
3) Based on the tick only, when you create shipment cost, the respective amount will be calculated. For example, if you not checked any of the boxes here and while you create shipment cost in VI01, once you tick the box Transfer, system will throw an error.
On your query,
What will be effect if I maitain each and every option
I request you to make a test on your own and update your findings.
thanks
G. Lakshmipathi -
Can we have multiple transports for the same object.
Hi guys,
Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
ThanksIts not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly -
Transport for System Copy from RSA1 in BW 3.5
Hi Guys,
I am not able to create transport for Source system objects for system copy in RSA1.
I have copied the production system(BWP) to sandbox(BWQ) and want to connect to same source system.
According to note 886102 when creating transport for Source system objects I am getting following error.
You cannot use request BWQK900020
Object ISIP ZPAK_5FKMUFOSQPPRNYYDZV1U6A7W0 could not be saved to order
BWQK900020
This is stand alone system but for transports I have created virtual system. Before creating virtual system I am able to create transports. But now after creating virtual systems I am not able to get pass above errors.
Any help would be appreciated also with points.
regards,
SantoshHi,
Check the notes 140276 and 325470 to chart out a plan of action.
BR/
Mathew. -
How to create a transport for sapscript translations
Hello,
does someone knows how to create a transport for sapscript translations which can then be released to the other system via SE10?
In 4.6C when I changed a translation for a sapscript form it created automatically a transport.
Now in 6.0 it wont!
Kind regards
Wolfi.Hi,
Go through the help.
http://help.sap.com/saphelp_nw04s/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/assigning%2ba%2btransport%2brequest%2bfor%2bthe%2btranslations%2bin%2bsmart%2bforms
in the above example you have to select FORM instead Smartform.
Thanks,
Sree.
Edited by: t sree on Oct 28, 2008 10:59 AM -
Microsoft Transporter for Lotus Domino
Hi,
Is there any way that the Microsoft Transporter for Lotus Domino can migrate the Domino nsf files to a PST file?
Although there is the Exchange and Sharepoint infrastructure in place, those servers are not directly available to myself and therefore unable to migrate directly to them.
ThanksNo, not to my knowledge.
We used Kernel for Lotus Notes to Outlook:
http://www.nucleustechnologies.com/lotus-notes-to-outlook.html?gclid=CNXqrYaf1KQCFVM33godtVMyRA
Regards
Pano
Pano Boschung, PageUp AG -
Material Block For Procurement
Hi Experts,
Here we have one requirement to block material for procurement only.
Stock at Plant should be process in normal for issue and consumption .
In MRP 1 view i tried with Plant-sp.matl status as 01 but it block the material for procurement as well warehose movements too.
It is very urgent.
Thanks in advance
Chetan MistryDear Vishal,
There is only three types are there as below
01 Blocked for procment/whse
02 Blocked for task list/BOM
99 Complete Block
How can i config new option for material block for payment only.
Thanks
Chetan Mistry -
Problem configuring Email transport for business service
Hi,
I'm trying to configure an email transport for an outgoing business service and the General Configuration page is showing the error:
[WliSbTransports:381030]Neither SMTP nor mail session exists
and consequently the Email Transport configuration page has both the SMTP Server and Maill Session pull downs greyed out.
I presume there is some external configuration required so that OSB can discover the SMTP service but I can't find any reference to this. Can someone help?
regardsBlog at http://blogs.oracle.com/christomkins/2007/12/sending_an_email_from_oracle_s.html by Chris Tomkins should help. Did you configure SMTP server in OSB?
Cheers
Manoj -
Capture of bids for procurement and workflow in SRM
Dear Gurus,
I am new to SAP. I would like to ask which functionality in SRM can do the following:
1. Capture bids for procurement
2. Use workflow to automate the evaluation and approval of the bids received (Matching bid price against budgeted cost)
3. Use workflow to support the automatic routing of all submissions and evaluations for approvals in respect of u201CApproval to Negotiateu201D and u201CApproval to Awardu201D.
4. Segregate bids that meet or are lower than the budgeted cost from those that are in excess, marking the latter in different colour
5. Capture of all data, especially from the lowest bidderHi,
All the functionalities are there in the SAP Bidding Engine(Strategic sourcing)
Regards
Ganesh -
Suggest the Best Practice for Procurement of Commodities like crude, copper
Dear Gurus,
Please suggest the best practice for following business Process.
My client is having the procurement need for a comodity whose prices are fluctuating. Say Crude Oil . The prices are changing every day. Now The client would like to pay to vendor on day of good receipt. But it may be possible that the price on GR day is much higher. How to control these kind of procurement. Presently I have activated the price variance through invoice posting but this is not working.
Can you suggest best practice for procurement of comodities.
Thank you for your consistant support.
Regards
Vinod Kakade
Edited by: vinodkakade on Jul 14, 2011 2:34 PMHi Vinod,
Would you know the price by the time the GR is to happen, in this case you can ask the vendor to send the confirmations, just prior to that with the correct price.
Please refer this link
Change in PO Price after goods receipts and goods issue
though the thread is marked unanswered.
Regards
Shailesh -
Same vendor for Procurement and Services
Hi,
How to use the same vendor code for Both Procurement and External Services, to trigger different pricing procedures.
Please suggest.
Thanks in advance,
njs.Hi,
Pricing procedure for Procurement depends on :
1. Schema Groups: Vendor
2. Schema Groups for Purchasing Organizations
System will look for the combination for both the schema group.
Pricing procedure for External service depends on :
1. Document category -- e.g. - RFQ , Pr or PO
2. Document type --- NB , UB
Regards,
Shailesh -
How to retire/archive/status a released workbench transport for an OSS note
My Question: Is there a best practice for the "retiring" or "archiving" or "statusing" of released workbench transports for OSS notes that have been imported into the quality environment, but should never be imported into the production environment?
For example an OSS note is applied and imported into QS1, but then a CRT Hotpack is applied as an entire patch upgrade, so that the prior individual transport is no longer needed. Best Business practice indicates to not delete a released transport, but unless there is a way to permanently segregate them from the remaining legitimately viable transports, there is always a risk that the "stale" code could inadvertently slip through thus overwriting good code.Hello.
Well, you have confirmed what I suspected when I read the descriptions - wrong forum.
I chuckled and couldn't stop a broad smile from creeping across my face when I read your response though: "the old BASIS type questions". I knew we were a bit behind the times here; you have definitely confirmed this suspicion.
Thank you again. I'll try another search of the OSS notes or put in a customer message just for the heck of it. -
How to create a transport for SAPscript form
Hi Gurus,
Good day!
I would like seek an expertise from you guys on how i'll be able to create a transport for the SAPscript form. The form has already been copied from the other boxes by running the program RSTXSCRP.
Appreciate your help. Thanks in advance!
Cheers,
Virgiliohi,
First u create the driver program of the sapscript...ok..
then go to the SE93 and create the T_code of that driver program..
Hope This helps
Regards
RItesh J -
Hello,
Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test.
ThanksI think you must have created this object as a Local Object. You need to do 2 things here :
Reassign the Development Class to a Z Dev Class.
Use trx code SE38. On the first screen, specify the program name & click on Goto-->Object Directory Entry.
You will get a popup here, change the Dev Class to whatever you have on your side, this will prompt you for a Workbench Transport request. Follow up with Basis to get it to Test. -
Lot Size Planning for Procurement
Hi guys
In our company we work with minimum lot sizes for procurement, and we need to configure minimum lot sizes for procurement in the SNP optimization run. It´s posible to do it in SNP, pls can someone tell me how to configure this in SNP?
DavidHi David,
I am glad to hear that.
Regarding your performance issue: it is very usual to have long runtime when using discrete model.
The complexity of this model is much higher than a linear problem; so the optimiser takes time to find THE optimal solution.
However there is a lot you can do to make it better:
1. Split your model: instead of running 1 big optimiser, run serveral smaller one in parallel.Ensure your model are all independant (e.g. no common product or resource)
2. Use decomposition: (product/ time/resource; based on your scenari) to simplify the porblem, hence speeding the solution.
3. Set a maximum time
You do not have to wait for THE optimal solution. The optimiser can sometime very quickly find a very good solution; the last hours are spent "fine tuning" it. Potentially, you might not be able to see the difference between a 4h job and the 15H one).
Hence SAP advises to set a maximum runtime when working with discrete model.
The question is how to define this maximum time to optimise the ratio solution quality / runtime.
Answer: test it, check the result. Be aware that perfomrance testing for the optimiser can take a while.
4. fine tune you optimiser setting
There is a couple a finetuning that can be done to improve performance, especially for discrete model.
I will not be able to help you woth that.
As far as I am aware only the SAP optimiser team has the expertise to help here.
I strongly recommand to contact them; their help is often invaluable. They will also help you to define the 3 first points.
I hope this will help you.
Thanks and Regards
Julien
Maybe you are looking for
-
Our school has four eMacs. One of them, a 1GHz, 10.3.9 Panther, 256 MB RAM, and out of warranty, has started to have a display problem. The display is showing negative colours, like white shows as black, blue shows as orange etc. This only affects ou
-
How GIF format is supported in XMP toolkit
Hi all, I'm new to XMP and I'm using the XMP toolkit since some weeks. I was easily managing JPEG, TIFF, PNG and PDF, but I have problems with GIF format. Documentation declares it is supported, but I didn't find BlueSquare.gif between the samples. T
-
Authentification from tow LDAP in webcenter spaces
My customer need to open authentification in webcenter spaces for all his employees and for his partners which are saved on tow different LDAP directory. How can i do to allow authentification from this tow LDAP directory? Regards. CMN
-
HI, I have insrtalle CLOUD this morning on my leopard (latest version) then after icloud has been installed I have downloaded lion from internet and installed it: sice preference system is quitting and impossible to retrieve my emails... What should
-
Is it possible to have each rows of a cross-tab be a hyperlink poiting to another report and how to accomplish that? My cross-tab rows represent categories, and I have another report for sub-categories (with category name as parameter), I'd like to b