Multiple AVC Profile for each SSID

Hello,
I know there is limitation on the number of ACLs in each AVC profile, but is there a way to build multiple profiles and link it to the same SSID?
thanks,

Hi Sandeep,
thanks for your reply, I think Cisco should consider allowing provisioning multiple profile for each SSID as the number of applications that needs block are exceeding each profile..
I do have Guest SSID and I want to block everything using AVC, due to it's limitation, this cannot be achieved.
Thanks,

Similar Messages

How to get multiple output formats for each execution of the report?

Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
Thanks

In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

Create unique user profiles for each separate session

Hi,
How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
- SYSTEMAPP
- SYSTEMAPP.000
- SYSTEMAPP.001
- SYSTEMAPP.002 (etc...)
The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
Kindly advise.

Hi Susie,
Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
you browse the folders in the server, you'll be able to see this:
C:\Users\SYSTEMAPP
Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
server to create another unique user profile as below:
C:\Users\SYSTEMAPP.000
Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
C:\Users\SYSTEMAPP.001
C:\Users\SYSTEMAPP.002
C:\Users\SYSTEMAPP.003
Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
to this forum.
Kindly advise.

Design and Web Premium creates huge profile for each network user.

Just wondering how I can get around the Adobe Design and Web Premium creating a huge profile for each network user. When a new user logs in on the network a 6 GB Adobe Design and Web Premium folder is created in their profile. With dozens of students logging into each machine that equals dozens of 6GB folders.
Windows 7 environment.

Moved to Creative Suite Enterprise Deployment.

How do I set up a separate "sync" profile for each firefox profile?

I use separate Firefox Profiles for different purposes, each with it's own set of bookmarks. On XMarks, it is relatively simple to have different profiles, but can the same thing be done in Firefox sync? One account, multiple profiles.

hi gray001,
to have separated Libraries from iTunes for your wife and you, i would recommend that you create a new second windows user account
thats the easiest way to avoid mix up of itunes content
if you create a second windows user account - itunes is already installed and only needs to be configured for your wife

One profile for each agent ?

Hello,
We are currently upgrading from Sunopsis V3 to ODI 10.1.3.4.0.
With Sunopsis we use several agents (more than 10), but they all use the same Sunopsis user.
For ODI installation I would like to add some security, for example each agent would use a specific ODI user, and this user could access only some servers.
This way, the agent from application X could not execute a scenario that accesses to servers from application Y.
Is this possible ?
What's the best way of doing this ?
Thank you
Nicolas

Hi Cezar,
Thank you for your answer.
In fact I tried to do the same thing, but with servers (because i think it would be easier to maintain).
I created one user with 2 profiles : "OPERATOR" and "CONNECT NG SRV" (a non generic profile for the "data server" object.)
But I didn't manage to add data servers to this user (the drag & drop does'nt work).
So I think I'm going to follow your advice...
(the disadvantage is that it's necessary to add each new version of one scenario to the user)
Thank you
Nicolas

How can I launch firefox on different displays simultaneously without creating profiles for each of them

On my solaris server, there is an application which, in order to display some information, opens the browser. The server can be accessed thorugh X windows by various users. The issue is that whn firefox is open on one display, it fails to open on another display.
The resolution for this problem as suggested by a lot of users on various forums is to create different profiles for various firefox instances. However, everytime my application will launch firefox, i will have to invoke it with -P option which will pop up the profile manager. I do not wish to show the pop up for creating profiles:(. Is there some way to allow multilple instances of firefox to run on different displays?

when you lock the preferences with the mozilla.cfg file in the firefox program folder as it's described in the mozillazine kb article above, it should apply for all users...

Updating multiple bank details for each vendor, through LSMW

Hi,
We need to do a massive update on our vendors bank details, and I'm trying to do it via LSMW. I have two problems.
Each vendor may have several bank accounts. In XK02 they appear in a list, and in LSMW the bank detail fields are inside arrays (for example the bank key on first line would be LFBK-BANKL(0)), but I don't know on what lines are stored the banks I want to update. Is it possible to determine the index n° of the array (line number) just by reading the table LFBK ? I can't go into XK03 for every vendor to check at which line the bank details are stored.
Second, I don't know how to update a different line each time with a single batch input recording. When I record a LSMW batch input, I have to chose a specific field to update, which includes the line n°. How can I specify the line n° as a variable part of the data? Or alternatively, I could record the batch input to update enough lines for each vendor (say 5) and only provide data for the the lines to be updated, but I assume the lines without data would get deleted when the batch is run?
Please help.

Dear John;
You may create your LSMW with a vendor which has n banks (say 5). You will write 5 rows of bank info. LSMW will create new field names for these areas. 01-02...
LFBK-BANKS(01)                 TR
LFBK-BANKS(02)                 tr
LFBK-BANKL(01)                 0067-00002
LFBK-BANKL(02)                 0067-00003
LFBK-BANKN(01)                 1234
LFBK-BANKN(02)                 1235
you will prepare your excel for this purposes after then.
I hope it will help.
BR.
Aydın

Calculate Days between same date field in multiple records, looping for each record

Be patient as I am a newbie to Sql Server (using 2008 R2) and SSIS. I have looked at multiple solutions in this and many other forums before submitting the question.
I am looking at records to identify the number of days between two dates. We review drug information. A member uses drug A (Code identifies this called GPI) and has refills throughout time. The goal is to calculate the days between Refill
1 and refill 2, then refill 2 to refill 3, etc. When that member record set is complete, we move to the next member record set.
The basic data would be as follows. Each record shown below would be a separate record in a single table :
Member
Drug Code
DateService
Days Between
1
A
3/1/2012
0
1
A
3/27/2012
27
1
A
4/21/2012
26
1
A
6/15/2012
56
1
F
2/25/2012
0
1
F
3/20/2012
25
1
F
4/17/2012
29
1
F
8/1/2012
107
5
B
2/15/2012
0
5
B
3/10/2012
25
5
B
4/10/2012
32
5
B
6/28/2012
80
5
B
7/10/2012
13
5
B
8/20/2012
42
The days between is the value I am looking to calculate. The First record for the grouping of Member and Drug Code will be zero ( 0 ) as there is no preceding date to calculate against. The process would then loop through the records at the grouping
(Member and Drug Code) until those records are calculated. It would then move on to the next group of Member/Drug records.
Any assistance would be greatly appreciated. Any clarification I can provide, I would be more than happpy too. Thank you in advance!

TSQL- Finding the difference in days of multiple records in SQL ServerWITH OrderDates AS (
SELECT
ROW_NUMBER() OVER (ORDER BY OrderDate DESC) AS RowNumber,
OrderDate
FROM OrdersTable
WHERE SKU = 'AA0000'
SELECT
AVG(DATEDIFF(DD, O2.OrderDate, O1.OrderDate)) AS AverageFrequency
FROM OrderDates O1
LEFT JOIN OrderDates O2
ON O2.RowNumber = O1.RowNumber + 1
Fabio Bilicki

ASA and ACS 5 multiple VPN profiles for one user

Hi there
I have a question about ACS 5.3 and ASA VPN profile authorization. I am not sure if it is possible to allow one single user for a set of VPN profiles on ASA, let's make an example:
ACS 5.3 group hierarchy:
- VPN users global
-- VPN users A
-- VPN users B
ASA VPN profiles:
- VPN profile A
- VPN profile B
- VPN profile Z
VPN authorizations:
1. VPN users global should have access to VPN profiles A, B and Z (here we create an authorization profile with no class an no lock attributes, so the group is allowed for all VPN profiles)
2. VPN users A should have access to VPN profile A (here we create a authorization profile with class and lock attributes for profile A)
3. VPN users B should have access to VPN profiles B and Z (is this possible and how does the authorization profile have to look like?)
Thanks a lot in advance and best regards
Dominic

Hi Dominic,
first of all, let's clarify that on the ASA you have tunnel-groups (named connection profiles in ASDM) and group-policies. These often, but not always, have a one-to-one mapping.
The Tunnel-Group (TG) is either selected by the user (either from a drop down list or by entering a specifiv group-url), or automatically selected by a certificate map (i.e. based on a certain field in the user cert, the user is mapped to one TG or another). The TG mainly specifies what kind of authentication is used.
The Group-Policy (GP) by default is the one specified in the TG, but it can be overridden by e.g. Radius.
So from the ASA's standpoint itself your posibilities are rather limited: the ASA will just apply whatever group-policy you push from Radius (in IETF attribute 25 aka "Class"), and in addition it will deny access to a user if the TG he selected does not match the value of the group-lock attribute. Group-lock can only contain one TG name, so you cannot do something like "allow both B and Z".
In other words you can not achieve your goal if the Radius server has a "static" set of attributes per user.
However, as of ASA 8.4.3 the ASA now sends 2 vendor-specific attributes in the Access-Request:
vendor ID = 3076, attribute 146 is "Tunnel Group Name" (string).
vendor ID = 3076, attribute 150 is "Client Type" (integer)
0 = No Client specified 1 = Cisco VPN Client (IKEv1) 2 = AnyConnect Client SSL VPN 3 = Clientless SSL VPN 4 = Cut-Through-Proxy 5 = L2TP/IPsec SSL VPN 6 = AnyConnect Client IPsec VPN (IKEv2)
So if you can configure the Radius server to "dynamically" permit/deny access based on the TG attribute I suppose you could achieve what you want.
If/how ACS can do this, I personally don't know; I suggest you ask in the AAA forum if you need help with that part.
hth
Herbert

S.Cart creates Split PO, One S.Cart creates multiple PO's for each SC item

Hi there
SRM 5 SP04 SRM-ECC........we have 2 Situations
first My S.Cart has Only 1 line item. (Not Ext Req) the System creates 2 PO's (PO xxxx412, PO xxxx388) for the same item. Both PO were "ordered". When I look in the "Display Changes" on the S.Cart the two PO were created on same day 9:39am and 9.43am by the system....strange.......mmmmm.....
WF is set for items that have a $>20,000 the total value is under that....so...whats going on
Second glitch S.Cart has 7 items it creates 7 POs. line items they are all low value items. nothing unique with shipto addresses or S.Locations.
cheers
tim

Hi
Please go through this Release independent SAP Consulting Note as well ->
Note 861889 - Limitations on limit and service PO's in case of ECS
Related links ->
Re: Deletion Service Line Item "Correct Purchase order or place on hold"
Re: shopping cart created 2 PO's fro same vendor and Org data...plz advice
Re: Cannot group multiple limit items in single local PO (ECS)
Hope this will definitely help.
Do let me know.
Regards
- Atul

Sharepoint 2013 ADFS Integration duplicates User Profiles for each Authentication Type

Hello everyone
i am building up a sharepoint farm which is hosting some of our corporate web sites. before integration Adfs and using SAML-Based Authentication every user had a single User Profile and were happy.
when i integrated adfs 3.0 and sharepoint 2013 SP1 i found whoun a user logs into sharepoint by using trusted identity token issuer (adfs 3.0) they get redirected to a new profile which is totally different from their old Profile. what is the problem ?

The problem is that SharePoint does not support Multilogon accounts. I asked for that here -
http://sharepoint.uservoice.com/forums/282887-customer-feedback-for-sharepoint-server/suggestions/7085002-multilogon-accounts
If you're just moving to ADFS only, then you can migrate users with Convert-SPWebApplication -
https://technet.microsoft.com/en-us/library/jj219696(v=office.15).aspx or with a script provided here:
http://blogs.msdn.com/b/sambetts/archive/2014/09/03/how-to-migrate-sharepoint-users-to-adfs.aspx (uses Move-SPUser).

Message output(IDoc) from MIGO creates multiple idocs repeats for each line

Hi Experts,
We want to send one idoc message thru MIGO output message control upon posting at HEADER level regardless of how many line items are there on the Purchase Order.
Using MIGO we are doing a 101 goods receipt on a PO with 3 line items and we are getting 3 idocs created with the same information form the message output control(basically it is at item level).
I don't know if this is how standard SAP designed the MM message output control.
From MIGO or MB03 there is no option to display the messages at the header level because you have to go thru the line item details to see the messages
I have also tried the collective slip option on MIGO and it did not work(help suggests that it will combine everything in one output)
Can you please let me know if there is a config or development that needs to made on controling the message output at the header level from MIGO.
Thanks for all your help
Shraj

Hi Sri hari Raju.
Did you solve this problem?
Can you tell me how?
Thanks

How to create multiple backup profiles for 2 disks?

Before I screw this up, I wanted to check with others here to see if I'm correct with my plan to use 2 disks to create 2 different types of backups.
I have 1 external HDD that's always hooked up to my iMac. This HDD is for full machine backups. However, I have a WD Passport drive that I want to use to back up multimedia (i.e. iTunes and iPhoto libraries). The last time I plugged in this drive, it screwed everything up... probably because Time Machine kicked in before I could exclude the Passport drive from the backup and the other HDD was near full.
What I was thinking I need to do is:
1.) Turn Time Machine off
2.) Mount the Passport drive
3.) Go into Time Machine perferences and select Change Disk
4.) Go into Options and deselect everything except our iPhoto and iTunes libraries (yuck... there should be a way to just select what you want)
5.) Turn Time Machine back on
6.) Run the backup
7.) Go back and change the disk back to my regular backup disk
This is ugly and seems error prone. Is there a better way to do this? Perhaps just deselect my Passport drive and write an Automator task for this? I'd like to do incremental backups, so that doesn't seem like a good solution either.
Thanks

Curt,
Time Machine settings are machine-specific, not "backup-specific." In other words, any exclusions you make will persist across any backups you make.
If you wish to make backups of your iTunes and iPhoto libraries, it would be better to do so manually. When you connect a drive that you might use for this purpose, simply open the Time Machine preferences and place that drive in the excluded list; there's no need to turn Time Machine off beforehand (if you exclude the drive while a backup is in progress, Time Machine will recover nicely and restart the backup).
In making your "additional" backup, I recommend using optical media. Burn your music to audio CDs, which could be re-imported into iTunes. Do the same with your images, which you would naturally burn to CDs/DVDs according to event or subject, then file those disks in an organized fashion. This will help you to keep your images organized, and you will feel safe in deleting some content from iPhoto as your need for it approaches nil. This in turn will help in taking the load off both your startup disk space requirements and Time Machine requirements.
A second external drive could be used to store those libraries, too, but I would do this in addition to the method described above. Optical disks, while bringing their own vulnerabilities, are less prone to failure than hard drives. One might lose the data on a single CD/DVD due to damage, but the rest would be OK. Store everything on one hard drive, and every file is dependent on the vitality of that one device. Overall, optical media wins out on this score. Then, there is the important issue of organization. A single drive allow one to be sloppy; use of optical media encourages (perhaps even enforces) the use of some type of file organization.
Scott

Create multiple dynamic control for each splistitem

Hi ,
I using SharePoint 2010 , in that am creating a custom visual webpart, to show in my home page.
In that i need to show my custom list's listitems such as 'ID' and 'Title' as dynamically label controls in my page.
When ever a new item added in that list , it will dynamically created labels and displyed in my webpart as last item.
can any one help me ?
regards,
RK

Hello,
You can't directly get newly created item in webpart but you can use CAML query to get item from list and show in webpart. Use OrderBy in query to get item in ascending or descending order. Here is ref code:
using(SPSite Site = new SPSite(SPContext.Current.Site.Url))
Using(SPWeb Web = Site.OpenWeb())
SPList list = web.Lists["ListName"];
SPQuery query=new SPQuery ();
query.Query = "<OrderBy><FieldRef Name='ID' Ascending='FALSE'/></OrderBy>";
query.RowLimit = 1;//get only single item if you want all items then remove this line
SPListItemCollection items = list.GetItems(query);
if(items.Count > 0)
foreach(SPListItem item in items)
string ID = Convert.Tostring(item["ID"]);
string Title = Convert.Tostring(item["Title"]);
Later bind this code with gridview.
http://programmingshare-thienle.blogspot.sg/2012/02/using-spquery-to-return-sharepoint-list.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see Please remember to mark the replies as answers if they help and unmark them if they provide no help

Multiple AVC Profile for each SSID

Similar Messages

Maybe you are looking for