Multiple column selection in OBIEE 11g

I have multiple checkboxes each checkbox represent one of measure of my fact table
Now user wants to select the multiple check boxes to generate a dashboard report on the basis of these selected check boxes.
Report only show the selected measures how I can do that in OBIEE 11.1.1.5
Actually I want to generate graph on the basis of selected measures.
I have created all columns in my report but I show the data only for selected columns when I draw the graph
All columns’ legend are shown I want to exclude all columns that are not selected so that their legends are also not shown in graph.
How I can do that.

user13559093 wrote:
Hi david,
I read your post, the one thing i couldn't understand is about dummy column and hiding.
you told i can a new column and hide that column, but still i could't figured it out.
so, if possible can you explain me in more detail.
your help is appreciated.
Thanks,
Rahul@Amith, Venkat's blog is not what the user is looking for. It doesn't apply.
Rahul, did you try what I asked? What specific part of what step did you not know what to do. My steps were detailed so I'm not sure what to "explain" unless you tell me exactly what you didn't get. If you didn't do anything and just want me to explain it again, then I say, do it first. The step-by-step instructions can be followed without "knowing what it's going to do," but when you do it, you'll see what I mean.
Remember, this is a free forum. You are not paying me to help you so you need to show that you are doing your homework by testing what I say to do. So go back and read the post again and actually do the steps. If you don't know how to do a specifc step, then ask about that.
This method will solve your requirement, put effort into applying it.

Similar Messages

  • Is It Possible to create multiple tab report in OBIEE 11g?

    Is It Possible to create multiple tab report in OBIEE 11g?

    Triple post even! Multiple tabs in a single OBIEE  &  https://forums.oracle.com/thread/2560266
    Stick to one post!

  • Multiple column selection in ssrs report

    Hi all
    I am developing one report 
    which would be based on column selection combo
    what i want to achieve...
    i will use Store procedure
    and in my report i want multi select parameter called @Column_To_Select
    i want available values for combobox as total column names which is return by store procedure
    and when i select column1 is should only display column1 from tablix
    can one help how can i get column names from store procedure 
    Dilip Patil..

    You cant alter dataset like this. metadata has to be constant for SSRS report to work properly.
    I think your requirement should be implemented as follows. Always bring all columns from query inside dataset. Then in your report container (tablix/matrix) set an expression for columns visibility property to show only when select parameter value has the
    column name.
    The expression would be like below for hidden property each column
    =IIF(InStr("," & Join(Parameters!Columnnames.Value,",") & ",",",ColumnName,")>0,False,True)
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Multiple hierarchy selection option - OBIEE Answers

    Hi,
    I have created an alternate drill path. I want the user to choose - which hierarchy the user wants to drill to
    eg:
    Total
    --------------------------Country
    ---------------------------------------Region
    ------------------------------------------------District
    ------------------------------------------------------Customer
    ---------------------------------------Zone
    ------------------------------------------------State
    ------------------------------------------------------Customer
    On the report, when the user clicks on the column Country, i want the user to show the option drill to either Region / State. Is that possible?? What properties do i need to set?
    Thanks in adv
    Regards,
    Snagzarkar
    Edited by: 794003 on Sep 9, 2010 10:54 PM

    Well, multiple hierarchy drills are not available in 10g, but I think they are in 11g. But what you can do is create two child reports, one for Region and one for State. Set up Value Interaction>Navigation and put both reports in the paths. When the user clicks on the value in the parent report, a menu will pop up showing Region and State (assuming that is what you name your child reports).
    The user can then choose his path and report.

  • How to add two columns in criteria(OBIEE 11g)

    Hi,
    I am trying to add two columns in a criteria in obiee
    *"Fact - OLB Processed Invoices"."Invoice Amount - Functional Currency"__"Fact - OLB Processed Invoices"."AR Tax Amount - Invoice Currency"
    but the problem is :-
    The first column have 500000000 and the second column contains NULL values the actual table. I think this might be the problem when I am trying to add them it is giving no output.
    just a blank box.
    Can any one tell me how can we add columns in this condition.
    Thank to one and all.

    Try IFNULL(expr, value)
    for other column
    "Fact - OLB Processed Invoices"."Invoice Amount - Functional Currency"+IFNULL("Fact - OLB Processed Invoices"."AR Tax Amount - Invoice Currency",0)
    Edited by: Srini VEERAVALLI on Mar 20, 2013 10:02 AM

  • Column specific filter Obiee 11g

    Hi all,
    I am trying to filter a column from edit formula tab. It is not a measure column. I am getting an error
    "the filter function requires at least one measure attribute in its first argument. select a measure or deselect all text to insert a new filter expression".
    Please help me out from this issue...
    Thanks

    Aswin,
    If you are trying to filter a column by a predicate the best way to do that is to use the standard column filter.
    You access that by clicking the little icon to the right of the column in the criteria tab and then select filter.
    The other filter is there for filtering an expression. If you need help in using the filter expression within the Edit Formula tab then click the help button on that tab to see more detailed information on how to use the arguments of that function.
    Please award points is this is helpful or the correct answer.

  • Multiple Column selection in single selection

    I have made an report using Pivot table
    I have 6 Dim & 1 fact
    out of this I have placed 3 Dim in Pages tab of pivot table so that it will work like Prompt
    Now the user wants to swap the tables dynamically
    I have Column selector for this purpose but user has to select 6 tables which is not acceptable
    can I achive this with only one selection
    Hope I am clear on requirement
    Thanks & Regards
    Sameer

    Can you try the same using view selector, pull all columns in criteria based on the view use those columns per view.
    Pls mark if helps

  • Hiding a report based on Action Link on report column values in OBIEE 11g

    Hi All,
    I have two Daashboard pages. In Page1, I have Report1.
    In  Page2, I have Report 2  and Report 3  in different sections.
    My requirement is, to create Action Link on two columns in Report1. Column1 should be navigated to Report2  in Dashboard Page2 and Column2 should be navigated to Report3 in the same Dashboard Page.
    Is it possible to use variables to hide Report2 when we click on Column1 and Report3 when we click on Column2.
    If yes, how to achieve this requirement?
    Please help me out.
    Thanks in Advance.

    Please see the following thread - I just implemented exactly what you are looking for. The bad thing is that it does require adding an additional column to all of your reports.
    https://community.oracle.com/thread/2483725
    Thanks,
    ~KKT~

  • Issue Action links,Column sorting in OBIEE(11g) 11.1.1.7.0

    Hello everyone,
    I want to provide the feature column sorting to my users but i dont want to provide any feature to users when they click on right mouse button.When we click on right mouse in action link column value it is giving the "action links","include/exclude columns" options etc.
    I disabled the do not display the action link report name in the column properties.
    Also disable the  include/exclude columns options in the interaction XYZ properties of the view.
    But still i am not able to understand why these links are coming when i run the report from the dashboard.
    Please help me out here.
    thanks,
    prassu

    Hi Timo,
    I am using data control web services to get these attributes on to the jspx page. The table has the value property which is binding to the iterator( #{bindings.SUMMARY_LINES_ITEM.collectionModel}).
    The table has various coulmns like order no, status, request and so on..where Order no and status are converted to a cmd link which navigates to another page on a query.
    I don't understand how setting sorting to true in one of the columns can make it not found in the iterator! And I get the errors only if sorting is done first before querying(clicking on one of the values in a column to navigate to another page).
    Thanks,
    Sue

  • Serial Number Column in analysis - obiee 11g

    Hi,
    How can I create a colum for Serial Number based on the rows(It should give 1,2,3,4...n no of rows) which generated in the report. Do I need to create a logical column in Admin tool..? or need to do something else..?
    Thanks

    @Aravind.
    i did the same but if there is any filter apllied in the report because of it some records are getting filtered in that case s.no will not be (1,2,4,6,7,8) in serial how to overcome this scenario???
    Thanks In Advance

  • Format with multiple column

    Post Author: vman
    CA Forum: General
    I am working a report that has had the details section format with multiple columns selected.  I want to change the report and remove the check box, but it is grayed out.  How can I get the report details section back to default without the detail size constraints?

    Post Author: rcoleman
    CA Forum: General
    Bearing in mind that I'm a relative newbie to the report writing/Crystal world...the only thing I can think of is that maybe the report was written using an older version of Crystal and this option wasn't available. Another possibility, if it's a sub-report, you might try making a copy of the sub-report saving it with the same name, deleting the old sub-report, replacing it with the copy you made. I know that has worked for me when I've had problems with the re-import when opening is greyed out.

  • OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

    OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

    Exclude:
    you Can exclude columns in either Table view or pivot table view by placing those columns in Excluded section but you will notice that it will appear in bi server parsed sql query.
    Not sure you were asking about runtime??
    would you please explain your question!!
    Thanks
    NK
    Edited by: DNK on May 8, 2013 9:48 PM

  • OBIEE 11g Unable to browse multiple value hierarchy for analysis.

    Hi All,
    We are using OBIEE 11g Value Hierarchy feature to display GL Segment Hierarchies.
    -     We have set the hierarchies to be Ragged and Skipped Levels in the RPD Business Model.
    -     We have dragged the hierarchies from Business Model to Presentation Layer.
    -     When selecting the hierarchies during Analysis, the first hierarchy that is browsed appears correctly. The next hierarchy when browsed just hangs.
    For example:
    Step 1: Browse Hierarchy1 (Block). The values show correctly.
    Step 2: Browse Hierarchy2 (Account). The hierarchy does not open with a blinking circle remaining forever.
    Alternatively;
    If we selected, Hierarchy 2(Account) first, the hierarchy shows correctly, but when selecting Hierarchy1 (Block) a blinking circle appears and remains for ever without opening the hierarchy.
    The nqquery.log shows correct result. My suspicion is that the issue is on the front end presentation services/javascript side.
    Is there any additional setup/configuration required to open multiple value hierarchies during analysis.
    Thanks and Regards,
    Sasi

    I have a pretty good guess at the hanging problem, unforntunitly i have no solutions yet.
    I having same type of issue, hangs when building filters on for 2nd or 3rd dim table.. I can see obiee fireing off the query to populate the dropdown by running
    select distinct on and joining to the fact table and dimensions that the users usually have selecte prior to start creatinng the filters.
    It is sort of like doing a intra dimension filter.. Sounds good but if user does not cut way down on number of fact rows by the time 2nd filtered column is selected the generated query to populate the drop down can run and run.
    OBI SE Once and discoverer dd not do this, at least not out of the box.

  • How to Hide a column in OBIEE 11g

    Hi,
    I am trying to hide a column of presantation layer table in OBIEE 11g. But it is not working.
    I am doing the follwoing.
    Open the permission tab of the column.
    Given no access to Everyone.
    Given No access the user/Application Role.
    When i go to web, the column is getting displayed in the table list. But, when i select the column and press the result button, it is not giving the result.
    It means, by doing the above steps it is restricting the data but visibility of column is already there.
    Same way it works for OBIEE 10g. Could you please let me know this feature has been removed from 11g or if it is still there then how we can achieved that.
    Thanks in Advance
    Niraj

    Hi Niraj,
    It's a bug in OBIEE 11.1.1.5.
    Bug 12352010: RESTRICTED COLUMNS SHOULD NOT SHOW IN SUBJECT AREA
    It is fixed in the version 11.1.1.6.
    Regards,
    Sandeep
    Edited by: Sandeep Saini on Mar 28, 2012 12:16 AM

  • Dynamically Aggregations Selection during runtime in OBIEE 11g

    Can anyone help me how to choose aggregations dynamically in OBIEE 11g while runtime.
    Say i have SUM and AVG as two aggregations, and depending on any one of selection my column total should vary.
    I acheived this using Variable prompt, but i want it as a drop down and just by toggling between the two my report should change with out using go / apply button.
    I tried and came to conclusion that these are static text and doesn't have any database value it can't be showed as dropdown.
    Thanks,
    Swathi

    shud be simple...Simply Create 2 Pivot Views for same Criteria in Single report and perform SUM and AVG for each. Now use View Selector to toggle between two Pivot to get SUM and AVG reports.

Maybe you are looking for