Multiple daily run outputs

I've configured /etc/defaults/periodic.conf to email the results of the daily, weekly, and monthly stuff to me.
Problem is, sometimes I get 2 daily run outputs.
1 always at 3:14 (which is too early) and the other at the regularly scheduled time of 3:15.
The periodic.conf file is unchanged except for my user name in the "*_output" fields.
Any ideas as to why this is happening?

WHEW!!! OK, you asked for it...
[charles@larry:~]$ cat /var/log/daily.out
Tue Sep 27 03:15:04 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 15987424 61776208 21% /
DUMP: WARNING: no file `/etc/dumpdates', making an empty one
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 26974 0 26974 0 0
lo0 16384 127 localhost 26974 - 26974 - -
lo0 16384 localhost ::1 26974 - 26974 - -
lo0 16384 localhost fe80::1 26974 - 26974 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 4045856 0 1067411 0 0
en0 1500 larry-local fe80::211:24ff:fe 4045856 - 1067411 - -
en0 1500 192.168.254 192.168.254.3 4045856 - 1067411 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Sep 28 03:15:00 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 16010484 61753148 21% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 53012 0 53012 0 0
lo0 16384 127 localhost 53012 - 53012 - -
lo0 16384 localhost ::1 53012 - 53012 - -
lo0 16384 localhost fe80::1 53012 - 53012 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 5499969 0 2397450 0 0
en0 1500 larry.local fe80::211:24ff:fe 5499969 - 2397450 - -
en0 1500 192.168.254 192.168.254.3 5499969 - 2397450 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Sep 29 03:14:58 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 29878744 47884888 38% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 8154 0 8154 0 0
lo0 16384 localhost ::1 8154 - 8154 - -
lo0 16384 localhost fe80::1 8154 - 8154 - -
lo0 16384 127 localhost 8154 - 8154 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 122706 0 83560 0 0
en0 1500 larry.local fe80::211:24ff:fe 122706 - 83560 - -
en0 1500 192.168.254 192.168.254.3 122706 - 83560 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Sep 30 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20040016 57723616 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 18918 0 18918 0 0
lo0 16384 localhost ::1 18918 - 18918 - -
lo0 16384 localhost fe80::1 18918 - 18918 - -
lo0 16384 127 localhost 18918 - 18918 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 136995 0 94955 0 0
en0 1500 larry.local fe80::211:24ff:fe 136995 - 94955 - -
en0 1500 192.168.254 192.168.254.3 136995 - 94955 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Oct 1 03:15:04 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20319648 57443984 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 10605 0 10605 0 0
lo0 16384 localhost ::1 10605 - 10605 - -
lo0 16384 localhost fe80::1 10605 - 10605 - -
lo0 16384 127 localhost 10605 - 10605 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 3648686 0 6497839 0 0
en0 1500 larry.local fe80::211:24ff:fe 3648686 - 6497839 - -
en0 1500 192.168.254 192.168.254.3 3648686 - 6497839 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Oct 2 03:14:56 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 17813884 59949748 23% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 21055 0 21055 0 0
lo0 16384 localhost ::1 21055 - 21055 - -
lo0 16384 localhost fe80::1 21055 - 21055 - -
lo0 16384 127 localhost 21055 - 21055 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 1825189 0 2229538 0 0
en0 1500 larry.local fe80::211:24ff:fe 1825189 - 2229538 - -
en0 1500 192.168.254 192.168.254.3 1825189 - 2229538 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Oct 3 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 16402432 61361200 21% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 50873 0 50873 0 0
lo0 16384 localhost ::1 50873 - 50873 - -
lo0 16384 localhost fe80::1 50873 - 50873 - -
lo0 16384 127 localhost 50873 - 50873 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 2756104 0 2777576 0 0
en0 1500 larry.local fe80::211:24ff:fe 2756104 - 2777576 - -
en0 1500 192.168.254 192.168.254.3 2756104 - 2777576 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Oct 4 03:15:01 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 16488896 61274736 21% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 19329 0 19329 0 0
lo0 16384 127 localhost 19329 - 19329 - -
lo0 16384 localhost ::1 19329 - 19329 - -
lo0 16384 localhost fe80::1 19329 - 19329 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 470303 0 302382 0 0
en0 1500 larry.local fe80::211:24ff:fe 470303 - 302382 - -
en0 1500 192.168.254 192.168.254.3 470303 - 302382 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Oct 5 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 16500540 61263092 21% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 43683 0 43683 0 0
lo0 16384 127 localhost 43683 - 43683 - -
lo0 16384 localhost ::1 43683 - 43683 - -
lo0 16384 localhost fe80::1 43683 - 43683 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 2245796 0 2297213 0 0
en0 1500 larry.local fe80::211:24ff:fe 2245796 - 2297213 - -
en0 1500 192.168.254 192.168.254.3 2245796 - 2297213 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Oct 6 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 17053400 60710232 22% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 63971 0 63971 0 0
lo0 16384 127 localhost 63971 - 63971 - -
lo0 16384 localhost ::1 63971 - 63971 - -
lo0 16384 localhost fe80::1 63971 - 63971 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 2775504 0 2662553 0 0
en0 1500 larry.local fe80::211:24ff:fe 2775504 - 2662553 - -
en0 1500 192.168.254 192.168.254.3 2775504 - 2662553 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Oct 7 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 22667484 55096148 29% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 87309 0 87309 0 0
lo0 16384 127 localhost 87309 - 87309 - -
lo0 16384 localhost ::1 87309 - 87309 - -
lo0 16384 localhost fe80::1 87309 - 87309 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 5659265 0 4495181 0 0
en0 1500 larry.local fe80::211:24ff:fe 5659265 - 4495181 - -
en0 1500 192.168.254 192.168.254.3 5659265 - 4495181 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Oct 8 03:14:54 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19158916 58604716 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 102217 0 102217 0 0
lo0 16384 127 localhost 102217 - 102217 - -
lo0 16384 localhost ::1 102217 - 102217 - -
lo0 16384 localhost fe80::1 102217 - 102217 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 5695701 0 4540012 0 0
en0 1500 larry.local fe80::211:24ff:fe 5695701 - 4540012 - -
en0 1500 192.168.254 192.168.254.3 5695701 - 4540012 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Oct 9 03:15:06 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 18662044 59101588 24% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 9627 0 9627 0 0
lo0 16384 localhost ::1 9627 - 9627 - -
lo0 16384 localhost fe80::1 9627 - 9627 - -
lo0 16384 127 localhost 9627 - 9627 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 12291 0 11790 0 0
en0 1500 larry.local fe80::211:24ff:fe 12291 - 11790 - -
en0 1500 192.168.254 192.168.254.3 12291 - 11790 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Oct 10 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20691252 57072380 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 102817 0 102817 0 0
lo0 16384 localhost ::1 102817 - 102817 - -
lo0 16384 localhost fe80::1 102817 - 102817 - -
lo0 16384 127 localhost 102817 - 102817 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 2560006 0 1772933 0 0
en0 1500 larry.local fe80::211:24ff:fe 2560006 - 1772933 - -
en0 1500 192.168.254 192.168.254.3 2560006 - 1772933 - -
en0 1500 (16)00:00:ff:3d:d8 2560006 0 1772933 0 0
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Oct 11 03:15:03 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20126788 57636844 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 4847 0 4847 0 0
lo0 16384 127 localhost 4847 - 4847 - -
lo0 16384 localhost ::1 4847 - 4847 - -
lo0 16384 localhost fe80::1 4847 - 4847 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 138010 0 73264 0 0
en0 1500 larry.local fe80::211:24ff:fe 138010 - 73264 - -
en0 1500 (16)00:00:ff:4e:4c 138010 0 73264 0 0
en0 1500 192.168.254 192.168.254.3 138010 - 73264 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Oct 12 03:14:52 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19960456 57803176 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 26533 0 26533 0 0
lo0 16384 127 localhost 26533 - 26533 - -
lo0 16384 localhost ::1 26533 - 26533 - -
lo0 16384 localhost fe80::1 26533 - 26533 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 525594 0 291500 0 0
en0 1500 larry.local fe80::211:24ff:fe 525594 - 291500 - -
en0 1500 (16)00:00:ff:23:e5 525594 0 291500 0 0
en0 1500 192.168.254 192.168.254.3 525594 - 291500 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Oct 13 03:14:59 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 33477940 44285692 43% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 6820 0 6820 0 0
lo0 16384 127 localhost 6820 - 6820 - -
lo0 16384 localhost ::1 6820 - 6820 - -
lo0 16384 localhost fe80::1 6820 - 6820 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 19603 0 20088 0 0
en0 1500 (16)00:00:ff:58:4b 19603 0 20088 0 0
en0 1500 larry.local fe80::211:24ff:fe 19603 - 20088 - -
en0 1500 192.168.254 192.168.254.3 19603 - 20088 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Oct 14 03:15:06 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 33774384 43989248 43% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 3706 0 3706 0 0
lo0 16384 127 localhost 3706 - 3706 - -
lo0 16384 localhost ::1 3706 - 3706 - -
lo0 16384 localhost fe80::1 3706 - 3706 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 551476 0 317143 0 0
en0 1500 larry.local fe80::211:24ff:fe 551476 - 317143 - -
en0 1500 (16)00:00:ff:d8:83 551476 0 317143 0 0
en0 1500 192.168.254 192.168.254.3 551476 - 317143 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Oct 15 03:15:01 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21273072 56490560 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 8358 0 8358 0 0
lo0 16384 127 localhost 8358 - 8358 - -
lo0 16384 localhost ::1 8358 - 8358 - -
lo0 16384 localhost fe80::1 8358 - 8358 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 553624 0 3125410 0 0
en0 1500 (16)00:00:ff:d0:df 553624 0 3125410 0 0
en0 1500 larry.local fe80::211:24ff:fe 553624 - 3125410 - -
en0 1500 192.168.254 192.168.254.3 553624 - 3125410 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Oct 16 03:14:52 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 22020832 55742800 28% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 27736 0 27736 0 0
lo0 16384 127 localhost 27736 - 27736 - -
lo0 16384 localhost ::1 27736 - 27736 - -
lo0 16384 localhost fe80::1 27736 - 27736 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 2431612 0 9048043 0 0
en0 1500 (16)00:00:ff:d0:df 2431612 0 9048043 0 0
en0 1500 larry.local fe80::211:24ff:fe 2431612 - 9048043 - -
en0 1500 192.168.254 192.168.254.3 2431612 - 9048043 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Oct 17 03:14:56 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21270112 56493520 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 13600 0 13600 0 0
lo0 16384 127 localhost 13600 - 13600 - -
lo0 16384 localhost ::1 13600 - 13600 - -
lo0 16384 localhost fe80::1 13600 - 13600 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 7599 0 11290 0 0
en0 1500 (16)00:00:ff:e2:0f 7599 0 11290 0 0
en0 1500 larry.local fe80::211:24ff:fe 7599 - 11290 - -
en0 1500 192.168.254 192.168.254.3 7599 - 11290 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Oct 18 03:15:00 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21281684 56481948 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 23608 0 23608 0 0
lo0 16384 127 localhost 23608 - 23608 - -
lo0 16384 localhost ::1 23608 - 23608 - -
lo0 16384 localhost fe80::1 23608 - 23608 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 43636 0 38846 0 0
en0 1500 (16)00:00:ff:63:68 43636 0 38846 0 0
en0 1500 larry.local fe80::211:24ff:fe 43636 - 38846 - -
en0 1500 192.168.254 192.168.254.3 43636 - 38846 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Oct 19 03:14:59 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20965720 56797912 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 7174 0 7174 0 0
lo0 16384 127 localhost 7174 - 7174 - -
lo0 16384 localhost ::1 7174 - 7174 - -
lo0 16384 localhost fe80::1 7174 - 7174 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 5304 0 7377 0 0
en0 1500 larry.local fe80::211:24ff:fe 5304 - 7377 - -
en0 1500 192.168.254 192.168.254.3 5304 - 7377 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Oct 20 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21027680 56735952 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 28141 0 28141 0 0
lo0 16384 127 localhost 28141 - 28141 - -
lo0 16384 localhost ::1 28141 - 28141 - -
lo0 16384 localhost fe80::1 28141 - 28141 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 40222 0 44745 0 0
en0 1500 larry.local fe80::211:24ff:fe 40222 - 44745 - -
en0 1500 192.168.254 192.168.254.3 40222 - 44745 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Oct 21 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21024288 56739344 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 41680 0 41680 0 0
lo0 16384 127 localhost 41680 - 41680 - -
lo0 16384 localhost ::1 41680 - 41680 - -
lo0 16384 localhost fe80::1 41680 - 41680 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 62062 0 69422 0 0
en0 1500 larry.local fe80::211:24ff:fe 62062 - 69422 - -
en0 1500 192.168.254 192.168.254.3 62062 - 69422 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Oct 22 03:14:54 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21042792 56720840 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 56966 0 56966 0 0
lo0 16384 127 localhost 56966 - 56966 - -
lo0 16384 localhost ::1 56966 - 56966 - -
lo0 16384 localhost fe80::1 56966 - 56966 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 243894 0 435280 0 0
en0 1500 larry.local fe80::211:24ff:fe 243894 - 435280 - -
en0 1500 192.168.254 192.168.254.3 243894 - 435280 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Oct 23 03:14:56 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21109624 56654008 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 21136 0 21136 0 0
lo0 16384 127 localhost 21136 - 21136 - -
lo0 16384 localhost ::1 21136 - 21136 - -
lo0 16384 localhost fe80::1 21136 - 21136 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 135994 0 108602 0 0
en0 1500 larry.local fe80::211:24ff:fe 135994 - 108602 - -
en0 1500 192.168.254 192.168.254.3 135994 - 108602 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Oct 24 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21223596 56540036 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 37148 0 37148 0 0
lo0 16384 127 localhost 37148 - 37148 - -
lo0 16384 localhost ::1 37148 - 37148 - -
lo0 16384 localhost fe80::1 37148 - 37148 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 809614 0 725247 0 0
en0 1500 larry.local fe80::211:24ff:fe 809614 - 725247 - -
en0 1500 192.168.254 192.168.254.3 809614 - 725247 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Oct 25 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21218116 56545516 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 51380 0 51380 0 0
lo0 16384 127 localhost 51380 - 51380 - -
lo0 16384 localhost ::1 51380 - 51380 - -
lo0 16384 localhost fe80::1 51380 - 51380 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 828816 0 742589 0 0
en0 1500 larry.local fe80::211:24ff:fe 828816 - 742589 - -
en0 1500 192.168.254 192.168.254.3 828816 - 742589 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Oct 26 03:14:58 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21649632 56114000 28% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 6179 0 6179 0 0
lo0 16384 127 localhost 6179 - 6179 - -
lo0 16384 localhost ::1 6179 - 6179 - -
lo0 16384 localhost fe80::1 6179 - 6179 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 311286 0 344645 0 0
en0 1500 larry.local fe80::211:24ff:fe 311286 - 344645 - -
en0 1500 192.168.254 192.168.254.3 311286 - 344645 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Oct 27 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21651088 56112544 28% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 12835 0 12835 0 0
lo0 16384 127 localhost 12835 - 12835 - -
lo0 16384 localhost ::1 12835 - 12835 - -
lo0 16384 localhost fe80::1 12835 - 12835 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 319300 0 352700 0 0
en0 1500 larry.local fe80::211:24ff:fe 319300 - 352700 - -
en0 1500 192.168.254 192.168.254.3 319300 - 352700 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Oct 28 03:14:53 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21659512 56104120 28% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 22729 0 22729 0 0
lo0 16384 127 localhost 22729 - 22729 - -
lo0 16384 localhost ::1 22729 - 22729 - -
lo0 16384 localhost fe80::1 22729 - 22729 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 335138 0 366351 0 0
en0 1500 larry.local fe80::211:24ff:fe 335138 - 366351 - -
en0 1500 192.168.254 192.168.254.3 335138 - 366351 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Oct 29 03:14:54 CDT 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20532436 57231196 26% /
/dev/disk1 7822056 7822056 0 100% /Volumes/HOUSEOFWAX
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 41321 0 41321 0 0
lo0 16384 127 localhost 41321 - 41321 - -
lo0 16384 localhost ::1 41321 - 41321 - -
lo0 16384 localhost fe80::1 41321 - 41321 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 1706861 0 7697473 0 0
en0 1500 larry.local fe80::211:24ff:fe 1706861 - 7697473 - -
en0 1500 192.168.254 192.168.254.3 1706861 - 7697473 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Oct 30 03:15:02 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20685528 57078104 27% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 15225 0 15225 0 0
lo0 16384 127 localhost 15225 - 15225 - -
lo0 16384 localhost ::1 15225 - 15225 - -
lo0 16384 localhost fe80::1 15225 - 15225 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 14091372 0 14695777 0 0
en0 1500 larry.local fe80::211:24ff:fe 14091372 - 14695777 - -
en0 1500 192.168.254 192.168.254.3 14091372 - 14695777 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Oct 31 03:20:29 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19127772 58635860 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 9161 0 9161 0 0
lo0 16384 127 localhost 9161 - 9161 - -
lo0 16384 localhost ::1 9161 - 9161 - -
lo0 16384 localhost fe80::1 9161 - 9161 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 8855 0 8825 0 0
en0 1500 larry.local fe80::211:24ff:fe 8855 - 8825 - -
en0 1500 192.168.254 192.168.254.3 8855 - 8825 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Nov 1 03:14:56 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19235196 58528436 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 115790 0 115790 0 0
lo0 16384 127 localhost 115790 - 115790 - -
lo0 16384 localhost ::1 115790 - 115790 - -
lo0 16384 localhost fe80::1 115790 - 115790 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 65671 0 64031 0 0
en0 1500 larry.local fe80::211:24ff:fe 65671 - 64031 - -
en0 1500 192.168.254 192.168.254.3 65671 - 64031 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Nov 2 03:14:57 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19674780 58088852 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 14035 0 14035 0 0
lo0 16384 127 localhost 14035 - 14035 - -
lo0 16384 localhost ::1 14035 - 14035 - -
lo0 16384 localhost fe80::1 14035 - 14035 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 3495807 0 246542 0 0
en0 1500 larry.local fe80::211:24ff:fe 3495807 - 246542 - -
en0 1500 24.176.112/21 24-176-113-173. 3495807 - 246542 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Nov 3 03:14:53 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20140296 57623336 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 27403 0 27403 0 0
lo0 16384 127 localhost 27403 - 27403 - -
lo0 16384 localhost ::1 27403 - 27403 - -
lo0 16384 localhost fe80::1 27403 - 27403 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 7455207 0 414054 0 0
en0 1500 larry.local fe80::211:24ff:fe 7455207 - 414054 - -
en0 1500 24.176.112/21 24-176-113-173. 7455207 - 414054 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Fri Nov 4 03:14:53 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20132452 57631180 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 43536 0 43536 0 0
lo0 16384 127 localhost 43536 - 43536 - -
lo0 16384 localhost ::1 43536 - 43536 - -
lo0 16384 localhost fe80::1 43536 - 43536 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 10954170 0 431935 0 0
en0 1500 larry.local fe80::211:24ff:fe 10954170 - 431935 - -
en0 1500 24.176.112/21 24-176-113-173. 10954170 - 431935 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sat Nov 5 03:15:05 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 21813620 55950012 28% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 14367 0 14367 0 0
lo0 16384 127 localhost 14367 - 14367 - -
lo0 16384 localhost ::1 14367 - 14367 - -
lo0 16384 localhost fe80::1 14367 - 14367 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 492686 0 454443 0 0
en0 1500 larry.local fe80::211:24ff:fe 492686 - 454443 - -
en0 1500 192.168.254 192.168.254.3 492686 - 454443 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Sun Nov 6 03:15:03 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 22718716 55044916 29% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 14129 0 14129 0 0
lo0 16384 127 localhost 14129 - 14129 - -
lo0 16384 localhost ::1 14129 - 14129 - -
lo0 16384 localhost fe80::1 14129 - 14129 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 71121 0 73806 0 0
en0 1500 larry.local fe80::211:24ff:fe 71121 - 73806 - -
en0 1500 192.168.254 192.168.254.3 71121 - 73806 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Mon Nov 7 03:14:53 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 20019400 57744232 26% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 30943 0 30943 0 0
lo0 16384 127 localhost 30943 - 30943 - -
lo0 16384 localhost ::1 30943 - 30943 - -
lo0 16384 localhost fe80::1 30943 - 30943 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 800173 0 2123247 0 0
en0 1500 larry.local fe80::211:24ff:fe 800173 - 2123247 - -
en0 1500 192.168.254 192.168.254.3 800173 - 2123247 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Tue Nov 8 03:14:58 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19816996 57946636 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 4604 0 4604 0 0
lo0 16384 127 localhost 4604 - 4604 - -
lo0 16384 localhost ::1 4604 - 4604 - -
lo0 16384 localhost fe80::1 4604 - 4604 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 3138 0 3229 0 0
en0 1500 larry.local fe80::211:24ff:fe 3138 - 3229 - -
en0 1500 192.168.254 192.168.254.3 3138 - 3229 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Wed Nov 9 03:14:52 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 78019632 19819912 57943720 25% /
Last dump(s) done (Dump '>' file systems):
mail:
postqueue: warning: Mail system is down -- accessing queue directly
Mail queue is empty
network:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 16384 <Link#1> 11982 0 11982 0 0
lo0 16384 127 localhost 11982 - 11982 - -
lo0 16384 localhost ::1 11982 - 11982 - -
lo0 16384 localhost fe80::1 11982 - 11982 - -
gif0* 1280 <Link#2> 0 0 0 0 0
stf0* 1280 <Link#3> 0 0 0 0 0
en0 1500 <Link#4> 00:11:24:7e:6d:62 10111 0 10560 0 0
en0 1500 larry.local fe80::211:24ff:fe 10111 - 10560 - -
en0 1500 192.168.254 192.168.254.3 10111 - 10560 - -
fw0 4078 <Link#5> 00:11:24:ff:fe:7e:6d:62 0 0 0 0 0
ruptime: no hosts in /var/rwho.
Rotating log files: system.log
Thu Nov 10 03:14:53 CST 2005
Removing old log files:
Removing scratch and junk files:
Removing scratch fax files
msgs: /var/msgs/bounds: No such file or directory
Backing up NetInfo data
Checking subsystem status:
disks:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/disk0s3 780

Similar Messages

Multiple inputs and outputs using DAQmx VIs

Hello,
I am fairly new with the LabView programming language. I have a few training books that I have been reading, and I have been following online tutorials and reading the forums. However, I have come to a problem where I don’t see a clear solution. I am using LabView 2009 (9.0f3) and DAQmx VIs.
I am using a NI 9172 chassis PLC, with two 9201 AI cards, 9217 AI RTD card, 9472 DO card, 9263 AO card, and two 9237 AI Bridge cards.
I am reading eight analog inputs with the 9201 cards, two analog RTD inputs with the 9217 card, three digital outputs with the 9472 card, three analog outputs with the 9263, and eight analog inputs with the 9237 cards.
I wrote a simple program to test one digital output task, two of the analog output tasks, and a single analog input task. I put all of them in the same while loop, and it worked perfectly. However, when I add analog input tasks to the same loop, I get an error 200022. So I tested each sensor individually by changing the channel before each run. I searched error 200022 and found that this is because I cannot start another analog input task until the previous one ends. With this said, I don’t know how to acquire an analog voltage in the same task as an analog RTD voltage. Both inputs take different constants in the start task DAQmx icon.
Attached is my test program. It is titled “Test All”. This is the program I used to test the various sensors. I tested the input sensors one at a time, and it worked fine. A few tasks are written just to test functionality, and will be added to later. The data is only displayed on the screen. I will add triggers and data write to disk functions later. This program works now, but if I add more analog inputs, it will generate the 200022 error.
Can someone show me how to correctly write the code for multiple inputs and outputs using DAQmx? All training materials and tutorials I can find all show a single input or single output, not multiples of each. Thanks for looking.
-Randy
Attachments:
TestAll-NI.vi ‏32 KB

Hi RandyC,
The Knowledge Base article Using Different Types of DAQmx Global Channels in the Same Task goes into a little more depth of what Bryan is talking about, and it also includes some example code to help show what to do.
Hope that helps,

Launchd .plist breaks when periodic daily runs

Why does my launchd .plist break when periodic daily runs?
I wrote a script basically like this
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>MacPeter.thingy</string>
<key>Program</key>
<string>/usr/local/sbin/my_script</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/sbin/my_script</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/var/log/myotherlog.log</string>
<key>UserName</key>
<string>root</string>
<key>WatchPaths</key>
<array>
<string>/var/log/my_log.log</string>
</array>
</dict>
</plist>
I had to do some of this at the command line with sudo to get this .plist file into /Library/LaunchAgents and launch it. The idea is that watches the log file
my_log.log (which I have created) and when there is activity on this log file it runs my_script, outputting the results to myotherlog.log.
In order to avoid my_log simply growing unmanageably I also modified the /etc/daily file to add my_log to the list of logs which are rotated daily at 3:15 a.m. At 3.15, periodic daily runs, it moves and gzips my_log.log to my_log.log.0.gz and it creates a fresh my_log.log using touch.
At this point my .plist remains loaded but stops working: it nolonger watches the new my_log.log.
As a workaround I have put the following lines in /etc/daily.local:
launchctl unload /Library/LaunchAgents/MacPeter.thingy.plist
launchctl load /Library/LaunchAgents/MacPeter.thingy.plist
This solves the problem. My question:
Is my workaround really necessary or am I missing some other point about
using launchd and .plist files?
G5 single processor Mac OS X (10.4)

Just as a quick guess, I would say that nothing actually breaks, you just need to keep in mind that if you roll the log you need to also reopen the file handle that points to the log file. If you don't reopen the file it will continue to look at the old, possible unlinked file pointer until the process is restarted.
Not having much to do with launchd I would assume that this is what is happening. You need to get it to reopen the log file after is it rolled.
Seeya...Q

Multiple daily updates are a nuisance: thinking of using Google Chrome, now.

I am receiving multiple daily updates for Firefox Browser. This is becoming a nuisance. Can there be one daily update? Frankly, I am considering using Google Chrome now.

Hi PAPPASAN44,
It looks like you are running 9.0.1 which is the latest version of Firefox. It came out a few days ago and there have been no updates since then. What makes you think that it is updating daily?
If you are seeing a message on [http://www.google.com/firefox/ this page] that you are out of date, you should take a look at [https://support.mozilla.com/en-US/questions/905310 the response from cor-el in this thread]. The page is just incorrect.
If you see the "Welcome to Firefox" or "Just updated Firefox" page every time you log in, you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
If that doesn't work:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
Hopefully this helps!

RE: How to have multiple application running under one server

          I have one server
          I have many application
          Question: Is it possible for me to have a weblogic properties file under each
          of this application.


If your question is whether you can run multiple instances of WebLogic
          (or multiple applications) on one server, the answer is yes. The only
          problem is, you must have a unique port for each of the servers to run
          on. I.e., they can not all run under port 80 which has obvious
          internet/network implications.
          This also means you have multiple weblogic.properties files etc. for
          each instance.
          We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
          multiple developers run their own instance on one box.
          Dano
          Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
          > No if you are running single instance of wls.
          >
          > Kumar.
          >
          > Sonny wrote:
          >
          > > I have one server
          > > I have many application
          > > Question: Is it possible for me to have a weblogic properties file under each
          > > of this application.

Multiple APP run's for same vendor

Dear Friends,
I would like to know whether it is possible to do multiple payment proposals for a vendor on same dates.
here is the scenario:
Each business area would like to creat and edit payment proposals for the same dates, for ex: Run date is 1.1.08, next payment date will be 02.01.08 and schedule the actul payment run on say 03.01.08.
The actual payment runs will be processed by different paying coc.ode on 03.1.08
so for a given vendor say we have 2 open items which are due for each business area. I tried giving Business area in free selections .
when I try to create a secong payment proposal system gives me the message saying no payment proposal found for the co.code Message nO.FZ349
Yes it does makes sense to this meesage in the sense system wants to check that no invoice is paid twice by mistake.
But my question is since I am restricting open items by Busines area in the selection parameters itself shouldnt that be considered by system.
Hope I am clear.
Please let me know your inputs on the same.
Points assured for useful replies.
Thanks,
Vamsi

Hi Chandra,
Thanks for your inputs.
When you say that same vendor can be paid more than 1 once in a given day by APP, I belive you meant that once paymnet run has been done we can create another APP process for the same vendor.
Yes I dont see any issues there.
I also have no doubt that we can create multiple payment runs for a given vendor for 2 different co.codes on the same day.
But the issue I have is a case of centralised payment for all regions which are represented by Business areas.
Each region will do business with the same pan india vendor and would like to create thier payment proposals. The payment runs for these proposals will be done by the head office.
while trying to the second payment proposal, thi sis the message:
"Vendor 54 222 is contained in proposal 24.01.2008 SB1; no editing"
Hope I am clear.
Thanks,
Vamsi

Multiple scripts running at the same time?

Is there a way to have multiple scripts successfully running at the same time?
At the moment if I start a second script while the first one is still running, the second one completes successfully but the first one stops. This seems to be because the first one is no longer the active document once the second one opens so can't continue.
Is there another way to script things like this so that multiple can run independently at the same time? You might ask why I'd want to run two at the same time and not just wait, but i've setup an asp.net web form front end and having problems if two people click the button around the same time.
I'm guessing this isn't going to be possible and i'm going to have to look for ways of doing this in asp.net instead and somehow queue the requests so you have to wait longer if the script is already running?
Thanks,
Andy

I'm
guessing this isn't going to be possible and i'm going to have to look
for ways of doing this in asp.net instead and somehow queue the requests
so you have to wait longer if the script is already running?
This is correct. The scripting interface to PS is single-threaded so you will need to queue up requests.

How do I create an xControl with multiple inputs and outputs?

Hello,
i am trying to write a new Xcontrol Element. In the data model I can create data types using the cluster to create compound types, eg an int and an int array. But how do I create an xcontrol which has multiple data inputs and outputs?
Kind Regards

Limping_Twerp wrote:
Alright: I see: An xcontrol is either an input OR an output. How do I achieve an output? Secondly: So you are saying the only Elements that can have multiple inputs and outputs are VIs?
Can you take a few steps back and explain what you are actually trying to do. SubVIs and Xcontrols have nothing in common and it is not clear why you even try to compare them side by side (e.g. in terms of the number of connectors).
Your questions about input or output tell us that you seems to have some misconceptions about xcontrols. Xcontrols are like regular controls, except they have some built-in intelligence that you can program. Most front panel object can be either controls or indicators and the same is true for Xcontrol. You create an Xcontrol, and after placing it on the front panel you can decide if it should be a control (where the code reads the value) or an indicator (were the code writes values to it). When you define the xcontrol facade, you also need to program how the visuals change if it is changed from control to indicator or vice versa.
As a first step, you should opend the example finder and look at some xcontrol examples.
Again, what are you actually trying to do?
LabVIEW Champion . Do more with less code and in less time .

Why is my ipod so slow and laggy? i have lots of space on it, my history is deleted, i dont have multiple apps running! I have an iPod 4th Gen for about 2 years now and I don't know what to do.... Please help

why is my ipod so slow and laggy? i have lots of space on it, my history is deleted, i dont have multiple apps running! I have an iPod 4th Gen for about 2 years now and I don't know what to do.... Please help

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Multiple Adobe Forms Output in single Adobe Form

Hi Experts,
When we login to portal a list of applications will be available in a table, each record contains details of the application. when we click on first field of any record in that table it will display one adobe form. Under the table i have a button print, suppose if i select some 5 records in the table and when i click that print button then all the 5 adobe forms output should display as a single adobe form with page breaks. I mean after completion of first adobe form output, the next adobe form output should start in a fresh page. i could able to display single adobe form but the problem is with multiple adobe forms output in single form. Any inputs will be greatly appreciated.
Regards,
Venkat

Hi,
The only way to solved your issue is to change your forms and give it all necessary information in several table . Like this you can manage break page depending of content.
For example, you form interface contains one header structure and a table of item . If you want to have several form into one result , change the interface by passing an internal table of header information . Then in the layout you have to use the different table to get the result you want .
Unfortunately there is no solution actually with AdObe Forms in SAP to merge several PDF into one .
Hope this help you.
Regards

How can I remove the repetitive multiple daily updates from Mozilla

Hello
How can I remove the repetitive multiple daily updates from Mozilla?
Within a day, each day I get prompts as: Mozilla Firefox Update is ready to install at your computer.........then I do install and update it.......then after few minutes again it asks to update the same edition.........again after logging in back few hours later it prompts me again with the same request........IT IS VERY ANNOYING!
Thank You,
Gene

''the-edmeister [[#answer-683804|said]]''
<blockquote>
You could allow the update to proceed - that will stop Mozilla from asking if you want to update every time you launch Firefox, as is supposed to happen.
Any particular reason that you don't want Firefox 35.0.1 to be installed?
</blockquote>
Hi The EDmeister,
Thank you for your response.
Nevertheless, I have to repeat that I have ALREADY INSTALLED the Firefox 35.0.1 in my computer and ALLOWED IT TO PROCEED.
The same edition is prompting me back again, and again and again, within a day, each day. I get that annoying message at the top-right hand.
I do not want to see it every time, multiple times a day, that is the issue here, unresolved!
Best regards,
Gene

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Portlet will run/output when run as Admin, but not normal user

Anyone know why a portlet would run/output under admin privs, but will not run under a normal user's privs? This is a VB.NET portlet using the EDK. Anyone have any ideas?

Flash Player should be initially installed using an Admin account. Once installed however, it should work for all users. If it does not function, then I suspect you're running into a file/folder/registry permission issue. This FAQ can help repair these problems:
How do I fix Windows permission problems with Flash Player?

IPhone3 - can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?

Can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?
My situation - use home computer for music etc., boat computer for weather file downloads,officecomputer for email / pictures ...
Thank you

There is an App called Weathertrack, which pulls from the web GRIB files (weather information), that I would like to download onto the laptop we have on the boat, that runs some routing software (SeaTrack), that in turn integrates weather, tide, GPS etc to help with vessel navigation.
I can obviously do this from my home computer (this is the one that has the 1-1 sync relationship), but I don't want to empty the IPhone content whilst on the boat ...
If you can think of a way of making this happen, I would be very appreciative. Both PCs are windows based, home is Vista, boat is XP.
Kind regards

Multiple daily run outputs

Similar Messages

Maybe you are looking for