Multiple data blocks on the same canvas

Forms newbie question:
Is it possible to have 2 data blocks with two different sets of transactional triggers (ON-UPDATE, ON-LOCK, etc.) on the same canvas?
I've got an example where i've got two data blocks (one sourced from a view, and one that is a CTL block) on the same canvas. The block sourced from the view is working fine. When I make updates, they are reflected, etc. But, i've got one field in the control block that I need to update from as well, and I can't seem to get it (or any of the CTL block items) to show up as "updateable", regardless of the set_item_property....theyre always grayed out.
Do i need to take the user to a new canvas to be able to utilize the update of the ctl field?

A second canvas is not needed. Normally, control-block items are always updateable, so there is something going on in your form to prevent it.
> I can't seem to get it (or any of the CTL block items) to show up as "updateable",
regardless of the set_item_property....theyre always grayed out.
What... Is there code someplace in the form that sets them to Enabled, false? If that is the case, then to get them working again, besides setting Enabled to true, you also must set Updateable and Navigable to Property_True. (This is documented at the end of the on-line help on Set_Item_Property.)

Similar Messages

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

Multiple master blocks populating the same detail blocks

Hey guys. Im doing something a little weirder than I usually do but I can't get it to work correctly and im wondering if any of you have accomplished this before.
I have a call center application which processes applications by either the application or by follow up. The application and follow up are each a block by themselves located on a separate pages on a tab canvas. Both these blocks are master blocks to the detail blocks which would be user_phones, user_addresses, user_bank_accounts, etc. The idea is I can use either page of the tabs and flip through either the follow up, or application master block and have it populate the user tables according to the user_id found on the master blocks. I figured I could use a when-new-block-instance trigger to switch off which block fires the on-populate-details trigger.
The problem is.... complicated. If I go to the follow up block and execute query, it brings back the right information on the detail block. The strange thing is it seems like when I move the cursor to a different record on the same block, forms is almost setting a SET_BLOCK_PROPERTY DEFAULT_WHERE action. This is un-noticeable until i go to the other master detail block. When I start using the applications block, it seems like all the detail records actually MATCH the user_id that the cursor was on in the follow up block...
phew! thats a lot of description for such a strange problem..
Anyways. Anyone encountered this before? Has anyone ever built a two master block form to populate the same detail block? Is it possible? I haven't found a thread in the forum about this subject..
Any help would be great. Thanks in advance :)

Having one detail block for two master blocks was never a use case that we considered for Forms. It sounds like you are trying to make a many-to-many relationship work with two master blocks. I suggest you think about having an intermediate block (hidden or not) that drives the detail block and make each master block drive that intermediate block instead of driving the detail block directly.

SharePoint 2013 List - Multiple Data Types in the Same List

In the same SharePoint 2013 list in Data Sheet View, I want to have one column where my end users enter inputs for KPIs. There are 3 groups of KPIs (A, B and C) and they each have different data types (A-string, B-decimal, C-percentage) and I want to be
able to base their input options off of the KPI type
Does anyone have any suggestions on how I can leverage my parent-child relationships so when an end user...
1. Picks KPI type A, they can select from a choice filed (Green, Yellow, Red)
2. Picks KPI Type B, they can enter a decimal (-1.000 to 2.000)
3. Picks KPI Type C, they can enter a percentage (-100.00% to 100.00%
I'm using if I want to keep this in one list, one column and in data sheet view that the out of the box solutions won't meet my requirements. I was looking at some solutions from Bamboo (Lookup Selector Column) but don't think that applies here.
Thanks!
Johnny

Hi Johnny, you can accomplish this using cascading lookups in InfoPath if that program is available to you. Otherwise, if you want a 3rd party product, we use the Kwiz cascading lookup and it's worked wonders for us:
http://www.kwizcom.com/sharepoint-add-ons/sharepoint-cascading-lookup-plus/overview/
Note: I have no relationship with Kwiz, just vouching for the product.
cameron rautmann

PowerShell using start job to run multiple code blocks at the same time

I will be working with many 1000’s of names in a list preforming multiple function on each name for test labs.
I notice when it is running the functions on each name I am using almost no CPU or memory. That led me to research can I run multiple threads at once in a PowerShell program. That lead me to articles suggesting start-job would do just want I am looking
for.
As a test I put this together. It is a simple action as an exercise to see if this is indeed the best approach. However it appears to me as if it is still only running the actions on one name at a time.
Is there a way to run multiple blocks of code at once?
Thanks
Start-Job {
$csv1 = (Import-Csv "C:\Copy AD to test Lab\data\Usergroups1.csv").username
foreach ($name1 in $csv1) { Write-Output "Job1 $name1"}
Start-Job {
$csv2 = (Import-Csv "C:\Copy AD to test Lab\data\Usergroups2.csv").username
foreach ($name2 in $csv2) { Write-Output " Job2 $name2"}
Get-Job | Receive-Job
Lishron

You say your testing shows that you are using very little cpu or memory in processing each name, which suggests that processing a single name is a relatively trivial task.
You need to understand that using a background job is going to spin up another instance of powershell, and if you're going to do that per name what used to require a relatively insignificant amount of memory is going to take around 60 MB.
Background jobs are not really well suited for multi-threading short-running, trivial tasks. The overhead of setting up and tearing down the job session can be more than the task itself.
Background jobs are good for long-running tasks. For multi-threading short, trivial tasks runspaces or a workflow would probably be a better choice.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How to prevent multiple users from updating the same data in coherence

Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
Thanks

I have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.

How do i set up multiple iCloud accounts on the same mac?

how do i set up multiple iCloud accounts on the same mac?

Interesting - I was sure I'd seen a note somewhere that it was only Mail, but this article:
http://support.apple.com/kb/ts4020
does say
Your secondary iCloud accounts can be set up and viewed in Settings > Mail, Contacts, Calendars on your iOS device, or Apple () menu > System Preferences > Mail, Contacts, Calendars on OS X Lion. You may choose to do this if you have a second iCloud account and need to access its Mail, Contacts, or Calendar data.
Note: While you can configure multiple iCloud Mail accounts in iOS, Push mail will only work for the primary iCloud account in iOS. Secondary account(s) will check for mail based on the settings in Settings > Mail, Contacts, Calendars > Fetch New Data.
It's not something I can test - I suppose the second account's data gets added to the lists in iCal and Address Book?

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V G R I D
IF o_grid_container IS INITIAL.
 CREATE OBJECT o_grid_container
 EXPORTING
 container_name = 'CCONTAINER1'.
 CREATE OBJECT o_grid
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid_container.
FOR first A L V G R I D
 PERFORM set_grid_field_catalog
 CHANGING i_grid_fcat.
 PERFORM modify_grid_fcat_predisplay
 CHANGING i_grid_fcat.
 PERFORM set_grid_layout_set
 CHANGING struct_grid_lset.
 PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
 SORT i_grid_outs BY year month.
 CALL METHOD o_grid->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid_lset
 CHANGING
 it_outtab = i_grid_outs[]
 it_fieldcatalog = i_grid_fcat[]
 it_sort = i_sort_fcat. " Period
ENDIF.
IF o_grid1_container IS INITIAL.
 CREATE OBJECT o_grid1_container
 EXPORTING
 container_name = 'CCONTAINER2'.
 CREATE OBJECT o_grid1
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid1_container.
* FOR SECOND ALV GRID
 PERFORM set_grid1_field_catalog
 CHANGING i_grid1_fcat.
 PERFORM modify_grid1_fcat_predisplay
 CHANGING i_grid1_fcat.
 PERFORM set_grid1_layout_set
 CHANGING struct_grid1_lset.
 PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
 SORT i_grid1_outs BY year month.
 CALL METHOD o_grid1->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid1_lset
 CHANGING
 it_outtab = i_grid1_outs[]
 it_fieldcatalog = i_grid1_fcat[]
 it_sort = i_sort_fcat1. " Period
ENDIF.
IF o_grid2_container IS INITIAL.
 CREATE OBJECT o_grid2_container
 EXPORTING
 container_name = 'CCONTAINER3'.
 CREATE OBJECT o_grid2
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid2_container.
FOR THIRD ALV GRID
 PERFORM set_grid2_field_catalog
 CHANGING i_grid2_fcat.
 PERFORM modify_grid2_fcat_predisplay
 CHANGING i_grid2_fcat.
 PERFORM set_grid2_layout_set
 CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
 SORT i_grid2_outs BY year month.
 PERFORM sort_outtable2 CHANGING i_sort_fcat2.
 CALL METHOD o_grid2->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid2_lset
 CHANGING
 it_outtab = i_grid2_outs[]
 it_fieldcatalog = i_grid2_fcat[]
 it_sort = i_sort_fcat2. " Period
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
 IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
 WHEN 'BACK' OR 'END' OR 'CANC'.
 PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
 text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
 Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

Multiple MIDI takes on the same track - can only find one in the editor?

After making several passes on an instrument track w/drum sampler on it I opened the piano roll editor to edit the data only to find only one of the passes represented there. I could only find the other passes when I moved the current one out of the track temporarily. There must be a better way to do this, can anyone hip me to the right way to edit all the data in the multiple passes at the same time? I can hear all the data, I just can't see all of it.
I'm doing this so I only have to instantiate the Virtual Instrument once in the session, CPU is always at a premium these days. I have done the bulk of my work in recent years in ProTools but I have found Logic Express 8 to be far more efficient with CPU load on my core 2 duo Macbook. I suspect I'm just missing something but I cannot seem to figure it out. Help?

I appreciate your comments but my issue was in editing the already recorded tracks. If you can find in those pages where it shows how to view all the data from the already recorded multiple MIDI tracks at the same time in the piano roll window and be able to edit them I'd be much obliged if you would point those out to me. I double checked your recommendation after reading your first reply, the answer I needed was not there.
Evidently you can only select and view one region at a time no matter how many there are in the same track. I have searched the LE 8 pdf manual and also searched thru an Apple Logic Pro Training series book for version 7 JIC it had some additional insight into this particular issue and came up empty, that's why I was asking for additional insight on this panel. I always go to the documentation first - RTFM is first call for me.
I've already figured the workaround and I'll know better next time to allow Logic to create its own multiple take folders so as far as I'm concerned this case is closed. Thank you again for your input.

Multiple Executions Plans for the same SQL statement

Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.
Below is the awrsqrpt's output for your reference.
WORKLOAD REPOSITORY SQL Report
Snapshot Period Summary
DB Name         DB Id    Instance     Inst Num Release     RAC Host
TESTDB          2157605839 TESTDB1               1 10.2.0.3.0 YES testhost1
              Snap Id      Snap Time      Sessions Curs/Sess
Begin Snap:     32541 11-Oct-08 21:00:13       248     141.1
End Snap:     32542 11-Oct-08 21:15:06       245     143.4
   Elapsed:               14.88 (mins)
   DB Time:               12.18 (mins)
SQL Summary                            DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
                Elapsed
   SQL Id      Time (ms)
51szt7b736bmg     25,131
Module: SQL*Plus
UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
TEST_BATCH_DT = (:B1 )
SQL ID: 51szt7b736bmg                  DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> 1st Capture and Last Capture Snap IDs
   refer to Snapshot IDs witin the snapshot range
-> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...
    Plan Hash           Total Elapsed                 1st Capture   Last Capture
#   Value                    Time(ms)    Executions       Snap ID        Snap ID
1   2960830398                 25,131             1         32542          32542
2   3834848140                      0             0         32542          32542
Plan 1(PHV: 2960830398)
Plan Statistics                        DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                            25,131       25,130.7     3.4
CPU Time (ms)                                23,270       23,270.2     3.9
Executions                                        1            N/A     N/A
Buffer Gets                               2,626,166    2,626,166.0    14.6
Disk Reads                                      305          305.0     0.3
Parse Calls                                       1            1.0     0.0
Rows                                        371,735      371,735.0     N/A
User I/O Wait Time (ms)                         564            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
Execution Plan
| Id | Operation                    | Name            | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |                 |       |       | 1110 (100)|          |
|   1 | UPDATE                      | TEST            |       |       |            |          |
|   2 |   TABLE ACCESS FULL          | TEST            |   116K| 2740K| 1110   (2)| 00:00:14 |
|   3 |   TABLE ACCESS BY INDEX ROWID| ACCT            |     1 |    26 |     5   (0)| 00:00:01 |
|   4 |    INDEX RANGE SCAN          | ACCT_DT_ACC_IDX |     1 |       |     4   (0)| 00:00:01 |
Plan 2(PHV: 3834848140)
Plan Statistics                        DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                                 0            N/A     0.0
CPU Time (ms)                                     0            N/A     0.0
Executions                                        0            N/A     N/A
Buffer Gets                                       0            N/A     0.0
Disk Reads                                        0            N/A     0.0
Parse Calls                                       0            N/A     0.0
Rows                                              0            N/A     N/A
User I/O Wait Time (ms)                           0            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
Execution Plan
| Id | Operation                    | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |              |       |       |     2 (100)|          |
|   1 | UPDATE                      | TEST         |       |       |            |          |
|   2 |   TABLE ACCESS BY INDEX ROWID| TEST         |     1 |    28 |     2   (0)| 00:00:01 |
|   3 |    INDEX RANGE SCAN          | TEST_DT_IND |     1 |       |     1   (0)| 00:00:01 |
|   4 |   TABLE ACCESS BY INDEX ROWID| ACCT         |     1 |    26 |     4   (0)| 00:00:01 |
|   5 |    INDEX RANGE SCAN          | INDX_ACCT_DT |     1 |       |     3   (0)| 00:00:01 |
Full SQL Text
SQL ID       SQL Text
51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
              NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
             RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )Your input is highly appreciated.
Thanks for taking your time in answering my question.
Regards

Oracle Lover3 wrote:
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.If you're using bind variables and you've histograms on your columns which can be created by default in 10g due to the "SIZE AUTO" default "method_opt" parameter of DBMS_STATS.GATHER__STATS it is quite normal that you get different execution plans for the same SQL statement. Depending on the values passed when the statement is hard parsed (this feature is called "bind variable peeking" and enabled by default since 9i) an execution plan is determined and re-used for all further executions of the same "shared" SQL statement.
If now your statement ages out of the shared pool or is invalidated due to some DDL or statistics gathering activity it will be re-parsed and again the values passed in that particular moment will determine the execution plan. If you have skewed data distribution and a histogram in place that reflects that skewness you might get different execution plans depending on the actual values used.
Since this "flip-flop" behaviour can sometimes be counter-productive if you're unlucky and the values used to hard parse the statement leading to a plan that is unsuitable for the majority of values used afterwards, 11g introduced the "adaptive" cursor sharing that attempts to detect such a situation and can automatically re-evaluate the execution plan of the statement.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Query from multiple data blocks

Hello professionals,
I having difficulty in finding solutions to query data from multiple data blocks. By the way I'm using Oracle Forms 10g
I have 4 data blocks and all items are database items
Below are the blocks,
1. student_main (columns : student_id, student_name, student_state)
2. subject_main (columns : subject_id, subject_desc, subject_student_id)
3. invoice_main (columns : invoice_no, invoice_amt, invoice_student_id)
4. receipt_main (columns : receipt_no, receipt_amt, receipt_invoice_ref)
The form will need to allow user to be able to query from any of the items/fields from the data blocks as listed above
For eg,
: if user query student_id then all related value items from table subject_main, invoice_main, receipt_main need to be displayed
: if user query invoice_no then all related value items from table student_main, subject_main, receipt_main need to be displayed
However the tricky part is that some student might have or might not have invoice / receipt data
I tried using relations but it didn't work both ways
I even create relations in every table (student_main to subject_main, subject_main to student_main, invoice_main to student_main, student_main to invoice_main and etc.) but it just make my running process hang
Need help on this matter
Thank you
Edited by: 990092 on Feb 25, 2013 12:15 AM

990092 wrote:
Hello professionals,
I having difficulty in finding solutions to query data from multiple data blocks. By the way I'm using Oracle Forms 10g
I have 4 data blocks and all items are database items
Below are the blocks,
1. student_main (columns : student_id, student_name, student_state)
2. subject_main (columns : subject_id, subject_desc, subject_student_id)
3. invoice_main (columns : invoice_no, invoice_amt, invoice_student_id)
4. receipt_main (columns : receipt_no, receipt_amt, receipt_invoice_ref)
The form will need to allow user to be able to query from any of the items/fields from the data blocks as listed above
For eg,
: if user query student_id then all related value items from table subject_main, invoice_main, receipt_main need to be displayed
: if user query invoice_no then all related value items from table student_main, subject_main, receipt_main need to be displayed
However the tricky part is that some student might have or might not have invoice / receipt data
I tried using relations but it didn't work both ways
I even create relations in every table (student_main to subject_main, subject_main to student_main, invoice_main to student_main, student_main to invoice_main and etc.) but it just make my running process hang
In general, relation will work. your relation creating was wrong, i think.
do as
1. student_main master to subject_main details
2. student_main master to invoice_main details
3. invoice_main master to receipt_main details
Hope this helps
Hamid

Multiple connection pools in the same DB physical source

Hi, I have this situation in BI Admin:
A single DB with 2 physical schema and 2 Connection Pools with OCI 10/11g.
Clicking on any table I can see the data after selecting the right connection pool for that table.
I created a Business Model based upon tables from one of the 2 physical schemas and a corresponding presentation layer. It is consistent and I can view the related subject area in Answers, but when I select a Dimension column (CONVERGENZA_NEGOZIO.STATO) and the fact measure ( Convergenza_Fact.INCASSO ) in viewing results I get this error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT CONVERGENZA_NEGOZIO.STATO saw_0, Convergenza_Fact.INCASSO saw_1 FROM Convergenza ORDER BY saw_0
Is it caused by the multiple connection pools under the same DB?

Yes I think that's correct, but only if you're going to use the same user to connect to them.
If you have a single user you're using to connect to a database to read data which happens to be over more than one schema, you'd use one connection pool.
However if you have entirely separate schemas (eg. different applications) and need to use a different user for each then you would use one connection pool per schema. Also if you thought you might move one of the schemas to another physical database at some point in the future it might be prudent to use a separate connection pool from the outset.
If you're still getting the error that the table cannot be found and your users have full permissions then logically the table that's being looked for does not exist, or you have not qualified it. What I mean by that is if you are connecting as USER2 and SELECT * FROM TABLE_A then the database will assume that you mean USER2.TABLE_A. If you mean USER1.TABLE_A then you need to make sure the qualification is in there.
In the admin tool check your Physical layer is set up correctly with your Physical Tables residing in the correct Physical Schemas.

Multiple plants exist in the same invoice - Error

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
firstly try to search the forum. It was asked before already.
You may check SAP Note 1571695, maybe it's your case.
Regards

Multiple Plants in MIRO - Multiple plants exist in the same invoice

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
Please check SAP Note 1571695 - 8I820 error message in MIRO transaction for the same.
Summary
Symptom
In MIRO transaction, during invoice verification, system prompts an error message as "Multiple plants exist in the same invoice".
This error will be prompted in scenarios where service tax is applicable and multiple plants exists in the same invoice.
Other terms
Transaction MIRO , BADI J_1I_MM_SER_CAT_DETERMINE, 8I820, 820, multiple plants, plant, error, MR11, BAPI, FI.
Reason and Prerequisites
Program error.
Solution
Apply the code corrections present in the Note.
Regards,
Sandesh Sawant

9 i Forms Checkboxes on the same canvas

Hi Everyone,
I need to show exceptions as checkboxes on the same canvas where i found and displayed the exceptions.
I have four fields and base on two of those fields which is a range of #. A begin and end.
I take that range( Beg and end) and show a multiline scroll tab and based on whether those number exceptions are released or closed which decide if that # will appear on the line of the checkbox. My canvas looks like this field h,i,j,k,l and m are in my first block.
field AAAAA FIELD H FIELD I FIELD J
field Beg BBBBBBBBBB XXXXXXX XXXXXXX XXXXXX
field End CCCCCCCCCC FIELD K FIELD L FIELD M
field DDDDDDDDDD ___ XXXXXXXX XXXXXXX XXXXXXXXX
_____ XXXXXXXX XXXXXXXX XXXXXXXXX
FDE FD F F G _____ XXXXXXXX XXXXXXXX XXXXXXXXX
1 XXX R
2 XXX R
3 XXX R C
4 XXX
5 XXX R
NOTE:
FIELD E HAS TWO EXCEPTIONS
LINE 3 AND 4
FIELDS E,F AND G ARE IN A DIFFERENT BLOCK
FIELDS K , L AND M SHOWS THE EXCEPTIONS FROM FIELD E
Fields H,I, J,K, L,M SHOULD BE ON THE RIGHT SIDE. THEY SHIFTED to THE LEFT.
CAN THIS BE DONE?
Thanks in advance.
Kimosabe
Message was edited by:
user507506
Message was edited by:
user507506

Manveer-Singh
Please don't post in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I'm locking this 3 year old thread now.
db
edit You have earlier been advised not to post in old dead threads.
[http://forums.sun.com/thread.jspa?threadID=354443]
Continuing to ignore this advice will render your account liable to be blocked.
Edited by: Darryl.Burke

Multiple data blocks on the same canvas

Similar Messages

Maybe you are looking for