Multiple entries in container

Hi all,
How do I pass multiple itab values into the Event container --> WF container ?
I have created a multiline container element with import parameter and expression: Append Table...but it is not working...
Any ideas anyone?
cheers
john

Hi John,
If I get you right, you need to pass a multiline parameter from Event container to workflow container.
For this check in the BO if the attribute to be passed is declared as multiline. Also if the values are getting properly populated in the same.
In the workflow container create a container element as an import export type with multiline selected.In the binding between the event container and the workflow container in basic data, bind the BO attribute to the workflow container element.
Hope this helps!
Regards,
Saumya

Similar Messages

Variant Configurator - Syntax for "contains" on multiple entry option ch.

I'm new to SAP, the VC and this forum so please direct me to the correct spot to pose my question.
I'm trying to write the syntax around a multiple entry charachteristic. It doesn't like '=' or ' IN ('x','y','z') ' because of the possibility of multiple picks.
Any thoughts?
Thanks,

Hi,
Please refer to the following section.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm
Thanks,

URGENT : How to save multiple entries in a T list at one go

If I have a T list that contains the colours availiable at a paint shop (just an example), e.g. white, green, red. I want to save the multiple entries in the t-list at any moment to the database column at one go. how can i do it.
Also the table doesn't contain a column for the colour_code, but instead it has the shop_id and the colour_id corresponding to that shop_id. So i need to insert into the database the colour_id for a particular colour_code as the t-list is just a control item in the data block.
Please help.
Abhishek.

if you use multi-selection Tlist item or create your own Tlist looking form, then you may loop thru these multi-selections and add your logic into this loop.

Multiple entries in TEVEN for one time event created by HR-PDC

Hi experts,
we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
Except the field PDSNR all the other fields contain exactly the same values.
I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
The first place where I can identify the problem with the duplicate records is the table TEVEN.
No records are left in the interface table CC1TEV.
I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
Has anyone else experienced this strange behaviour or knows what I could further investigate?
Many thanks for your replies in advance and best regards
Günter

Hi Carlos,
thanks for your fast reply.
It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
But do you know whether there is any possibility to find out how it comes to these repeated postings?
I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
Could you please let me know your thoughts about that?
Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
Thanks and best regards
Günter

How to Add multiple entry to the group policy security filtering

How to Add multiple entry to the group policy security filtering
Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

Hi
Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
Try right clicking on the policy and then edit
Then in Editor Right click on the name of the policy and Properties
Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
the correct option also "From this Location" is set to your entire directory not the local server.
Update us with the above.
Thanks

How to find multiple entries in the Directory

Hi,
my directory contains lot of multiple entires and I want to find out is there a easier method by a script or command to find out all the mutiple entries in the directory.
Thanks!!
Message was edited by:
Sun_One@TCS
Message was edited by:
Sun_One@TCS

Are you talking about entries that have been renamed because of a Replication Naming conflict (like the entry was added on 2 masters at the same time) ?
If so, please check the Administration Guide, Replication section.
<http://docs.sun.com/app/docs/doc/819-0995/6n3cq3av8?a=view#gdquf>
If you were talking about something else, please be more explicit. Directory Server does not allow you to create multiple entries with the same name. DNs are unique.
Regards,
Ludovic

Multiple entries per line on MTRs

Hello,
Can anyone tell me what the multiple line items are when running an MTR? I previously though that the "extra" line entries were the various paths that an ICMP packet may take to the destination, but I have observed that the last hop will occassionally contain multiple entries, as well. This is confusing me in my newbness. Can anyone help provide some insight into this?
Thanks,
Kevin
Sample MTR (IPs have been changed to protect the innocent).
1. 10.16.224.1                                                                                                                            0.0%    69    0.3   0.3
2. 10.7.255.8                                                                                                                              0.0%    69    0.3   0.4
3. 10.7.127.135                                                                                                                            0.0%    69    0.4   0.7
4. 10.11.62.2                                                                                                                             0.0%    69    0.7   2.2
5. 10.15.107.128                                                                                                                          0.0%    69    1.4   8.1
6. 10.15.96.113                                                                                                                           0.0%    68   46.4 37.2
    10.15.101.150
    10.15.105.18
7. 10.15.101.154                                                                                                                          0.0%    68   90.4 66.9
    10.15.96.120
    10.15.96.54
    10.15.100.67
8. 10.15.100.136                                                                                                                          0.0%    68   84.5 94.4
    10.15.108.119
    10.15.101.152
    10.15.108.2
    10.15.96.110
    10.15.108.117
    10.15.101.144
    10.15.96.80
9. 10.15.102.114                                                                                                                          0.0%    68   78.8 88.7
    10.15.96.217
    10.15.108.117
    10.15.96.219
    10.15.108.115
    10.15.96.223
    10.15.96.221
    10.15.108.0
10. 10.73.188.43                                                                                                                            0.0%    68   85.0 86.4
    10.15.96.217
    10.15.96.221

Hello,Can
anyone tell me what the multiple line items are when running an MTR? I
previously though that the "extra" line entries were the various paths
that an ICMP packet may take to the destination, but I have observed
that the last hop will occassionally contain multiple entries, as well.
This is confusing me in my newbness. Can anyone help provide some
insight into this?Thanks,KevinSample MTR (IPs have been changed to protect the innocent).
1.
10.16.224.1
0.0%    69    0.3   0.3
2.
10.7.255.8
0.0%    69    0.3   0.4
3.
10.7.127.135
0.0%    69    0.4   0.7
4.
10.11.62.2
0.0%    69    0.7   2.2
5.
10.15.107.128
0.0%    69    1.4   8.1
6.
10.15.96.113
0.0%    68   46.4 37.2
    10.15.101.150
    10.15.105.18
7.
10.15.101.154
0.0%    68   90.4 66.9
    10.15.96.120
    10.15.96.54
    10.15.100.67
8.
10.15.100.136
0.0%    68   84.5 94.4
    10.15.108.119
    10.15.101.152
    10.15.108.2
    10.15.96.110
    10.15.108.117
    10.15.101.144
    10.15.96.80
9.
10.15.102.114
0.0%    68   78.8 88.7
    10.15.96.217
    10.15.108.117
    10.15.96.219
    10.15.108.115
    10.15.96.223
    10.15.96.221
    10.15.108.0
10.
10.73.188.43
0.0%    68   85.0 86.4
    10.15.96.217
    10.15.96.221
Hi Kevin,
If you see how to read MTR output just check the below example which has the heading
          ACME (0.0.0.0)                                                Sun May 4 20:08:00 2008
Keys: Help   Display mode   Restart statistics   Order of fields   quit
                                                        Packets                                                                        Pings
Host                                              Loss%                                                     Snt   Last   Avg Best Wrst StDev
1. 192.168.2.1                              0.0%                                                        24    1.9   2.1   1.1 13.8   2.6
2. 192.168.1.1                              0.0%                                                        24    2.8   2.4   1.9   3.2   0.4
3. 194.19.98.129                          95.7%                                                     24   22.4 22.4 22.4 22.4   0.0
4. 195.204.200.13                        4.2%                                                       24   29.4 24.3 16.6 36.2   5.2
5. 194.19.81.37                             0.0%                                                       24   36.5 32.1 19.3 48.7   6.7
The above output shows the packet loss occured while the device coming in between to destination with ping responce of last,latest and avg fromwhere we can come to conclusion where is the problematic area like if you see the above output router at 194.19.98.129 is having haigh packet loss,it can be problem with routing protocol, if the lag is a bad route, cached arp, or bad routing tables.
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Multiple Entries in Single Field (seperate data...?)

I have some mess of data and curious on if this can resolved simple from a query.
What I have, is multiple entries in a single cell. All the data is separated by pipes(|).
So, I have data similar to this in a table.(all made up of course :))..
Soda, coke|pepsi|dew|dtcoke,
Computer, dell|hp|gateway,
What I'm looking to do, is to turn these values into separate columns. So the final output would look
soda, coke
soda, pepsi
soda, dew
soda, dtcoke
computer, dell
computer, hp
computer, gateway
Any suggestions. And, sorry for the hefty examples. Figured more the better....
Edited by: Topher34 on Sep 5, 2008 9:20 AM

Hi,
Topher34 wrote:
With that, ...With what? There are a lot of queries in the thread to which C linked, not to mention links from there. If you need an explanation of any of them, post a copy.
I think this is what you want:
WITH cntr AS
 SELECT LEVEL AS n
 FROM dual
 CONNECT BY LEVEL <= 1 +
 ( SELECT MAX (REGEXP_COUNT (b_list, '[|]+'))
 FROM table_x
SELECT a
, b_list
, REGEXP_SUBSTR ( b_list
 , '[^|]+'
 , 1
 , n
 ) AS b
FROM table_x
JOIN cntr
ON n <= 1 + REGEXP_COUNT (b_list, '[|]+')
ORDER BY a
, n;In Oracle 11, this produces the following output from the sample data you posted (that is, the first two distinct columns):
A B_LIST B
Computer dell|hp|gateway dell
Computer dell|hp|gateway hp
Computer dell|hp|gateway gateway
Soda coke|pepsi|dew|dtcoke coke
Soda coke|pepsi|dew|dtcoke pepsi
Soda coke|pepsi|dew|dtcoke dew
Soda coke|pepsi|dew|dtcoke dtcokeREGEXP_COUNT is new in Oracle 11, but here's how to adapt it for Oracle 10:
The solution above finds the number of entries in b_list (entries delimited by one or more consecutive | characters) like this:
1 + REGEXP_COUNT (b_list, '[|]+')In Oracle 10, you can get the number of entries delimited by a single | character like this:
1 + LENGTH (b_list) - LENGTH (REPLACE (b_list, '|', NULL))The results will be the same if b_list does not contain consecutive | characters. Otherwise, you may want to test for NULL values in column b.
Edited by: Frank Kulash on Sep 30, 2008 3:32 PM
Originally posted with error.
In the Oracle 10 work-around, when this expression
1 + LENGTH (b_list) - LENGTH (REPLACE (b_list, '|', NULL))is used in sub-query cntr, it is to find the worst case across the whole table, so it should be the argument of MAX. Say
MAX (1 + LENGTH (b_list) - LENGTH (REPLACE (b_list, '|', NULL)))or
1 + MAX (LENGTH (b_list) - LENGTH (REPLACE (b_list, '|', NULL)))In the main query, it applies just to the single value in the current row, so you should not use MAX there.

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Can I combine multiple entries into a single statement?

I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.

Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work.

HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!

The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Multiple entries of the same topic in calendar

Hi, i am having trouble with my calendar, as in it displays multiple entries of 1 entry on the same day! eg. if i have one entry then it displays that same entry about 15-20 times on that same day in a list!!! can anyone help with this fault?

I'm having same problem but where there are duplicate calendar entries, one of the entries cannot be changed (doesn't have edit button)and the other entry can be changed. Needed to reschedule a doctor's appointment and wasn't able to delete b/c there isn't an edit button. So it stays there. Don't know which date is the new rescheduled date. I have iPhone 3g. Since iPhone4 my 3g is extremely slow too.

To delete multiple entries in table control in module pool

Hi,
Please help me out to know , how to delete multiple entries from table control when multiple lines in table control are selected.
Regards,
Irfan Hussain

hai,
you can do it inthis way.
in the PAI event.
loop at <table control name>
module del_itab.
endloop.
in the nodule,write the folowing code.
if <tablecontrol>-fieldname = 'X'.
delete <tablecontrol-itab>
endif.
cheers

Multiple entries in container

Similar Messages

Maybe you are looking for