Multiple entries in TEVEN for one time event created by HR-PDC

Hi experts,
we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
Except the field PDSNR all the other fields contain exactly the same values.
I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
The first place where I can identify the problem with the duplicate records is the table TEVEN.
No records are left in the interface table CC1TEV.
I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
Has anyone else experienced this strange behaviour or knows what I could further investigate?
Many thanks for your replies in advance and best regards
Günter

Hi Carlos,
thanks for your fast reply.
It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
But do you know whether there is any possibility to find out how it comes to these repeated postings?
I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
Could you please let me know your thoughts about that?
Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
Thanks and best regards
Günter

Similar Messages

  • Learning Admin Learning History One time Event

    Hi
    at learning admin resp. when we search for enrollment subscription in learning history, the last entry is One time event, there is no create button with that. What is the use of this? Where do I create such one time events?
    Regards
    Vikas

    As Anders said, One Time Events are no longer used - that's why there's no 'Add' button. If you had been using OLM for a long time (back when it was OTA) you may have used One Time Events as they used to be something you could use. This region of the page is only for customers that previously used One Time Events. If your organisation does not use these, I would recommend you personalise off that region if possible.

  • PAN number for one time vendor

    Hi,
    At the time of transaction against one time vendor with deduction of tds at the time of document saving
    system are giving error "PAN number not available'"
    Can any body infm me where we should update the PAN number for one time vendor as if we update the PAN number in one time venodr cin tab then for every one time vendor system is showing the same number ,
    So pl suggest where we should maintain PAN number of one time vendor
    I am in ECC6
    Regards
    Vijay

    Hi,
    In the Creation of Vendor master data, CIN Tab shows onthe menu bar ther you will assign the PAN number .
    If the TAB is not shown , assigned in the t code OMT3E select user screen reference and select New Entries and maintain the user and the counry.
    May I hope this will helpfull
    Regards,
    Kanike

  • Name and city not defined in FB60 for one time account

    Hello Guru's ,
    We are on SAP ECC 6.0 and I have defined a one time vendor in the standard account group CPD One-time vend.(int.no.assgnmt).
    In the screen layout for that account group I have the address details for name1 and postal code, city defined as optional entry. In the master data of the one time vendor I have however created an address so the address details like Name1 and City are filled.
    When I use MIRO for creating an invoice the address details are filled for the one time vendor, but when I use FB60 it prompts the following message: 'Enter a name and city for one time postings'.
    Why are the address details not filled in transaction FB60 while the have been filled in MIRO ? And why can I not post the Invoice as I have defined the name and address as optional entry in OBD3 ?
    Thanks as ever for your reply's

    Yes I understand that. The problem is however that we have invoice scanning and when the invoice is scanned it comes into the rework fase where we enter the one Time vendor. In a normal situation the invoice wille be created and parked (status completion) after which AP clerks can either enter a Purchase order or not. With the One Time vendor I don't get an invoice document as it prompting for the Name and City. Becaue of that I entered the name and city in the vendor master data and set them to optional in OBD3. Nonetheless it still gives me the error. Also in transaction FB60. So if it doesn't work with making fields optional in the vndor accoutn group and entering the requested data in the vendor master data I probably must set the error message some where into a waring ? Funny thing is that it does work for the MIRO transaction as I am not getting the error there.
    Thanks
    Edited by: Antoinette Stork on Jun 19, 2009 2:46 PM

  • Block Purchaisng screen for one time vendor acount group

    Hi Experts,
    Hope everyone is doing good.
    How can we block purchasing screen for one time Vendor account group.
    User requirement:
    He wanted to maintain only Accounting data for one time vendor but not purchasing data.Though I have suppressed all the Purchasing related fields in Screen layout for Vendor account group but still at the time of creation of one time vendor "create Vendor:purchasing screen is coming"
    Is there any option to suppress/Skip  this screen "Create Vendor:Purchasing Data" ?
    Regards,
    Uzair

    - Account group is just one of the four factors influencing the field status. (If all the fields are suppressed in a screen the screen will not appear during the creation of the VMR).
    - Company Code, Transaction Used and Purchasing Organization are otehr influencing factors.
    - Since the field status depend on several influencing factors, Link rules are necessary which determine the instance of the field status if different influencing factors have different effects.
    - Hide has priority 1, Display 2, Mandatory 3, Optional entry 4
    - Say for e.g. you want a field to be suppresses due to account group but a mandatory entry due to purchasing organization. Instance hide has the highest priority. If a field was suppresses by account group what was specified by purchasing organization becomes irrelevant.
    - Display overrides Required & Optional Entry
    - Required entry overrides Optional entry

  • International version for one-time vendor

    Dear all,
    is it possible to bring out the international version screen when booking the one-time vendor invoice?
    Thanks and regards

    Hi Tao,
    I am facing the same problem. I maintain the international address versions for TW (language ZF - Chinese tranditional). It works just fine for regulat vendors, however when it comes to a one-time vendor (account group CPD), I can only enter either the English or the Chinese name in the one-time vendor screen, during the invoice entry.
    I checked the international version is maintained in FK02 of the one-time vendor. Where and how do I enter the vendor name in EN anf ZF in the same document?
    I also am struggling with the account holder field, which is unavailable for one-time vendor.
    Please advise.
    Thank you,
    Inna

  • Sysresv returns multiple shared memory IDs for one database

    Shared Memory:
    ID KEY
    8 0x00000000
    9 0x00000000
    10 0x00000000
    13 0x00000000
    14 0xae2ae9d0
    Please see this 'sysresv' output. It returns multiple shared memory IDs for one database (althouth all are 0s except one). Why is this? Does it matter? It seems not eating up memory. Stop and start database didn't help.

    * System Configuration
    swap files
    swapfile dev swaplo blocks free
    /dev/md/dsk/d101 85,101 16 201342320 201342320
    * Tunable Parameters
    2055864320 maximum memory allowed in buffer cache (bufhwm)
    30000 maximum number of processes (v.v_proc)
    99 maximum global priority in sys class (MAXCLSYSPRI)
    29995 maximum processes per user id (v.v_maxup)
    30 auto update time limit in seconds (NAUTOUP)
    25 page stealing low water mark (GPGSLO)
    1 fsflush run rate (FSFLUSHR)
    25 minimum resident memory for avoiding deadlock (MINARMEM)
    25 minimum swapable memory for avoiding deadlock (MINASMEM)
    CO4P:/opt/oracle:>ipcs -ma
    IPC status from <running system> as of Monday, April 21, 2008 2:50:10 PM PDT
    T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
    Shared Memory:
    m 14 0xae2ae9d0 rw-r--- oracle dba oracle dba 481 24576 20322 25104 14:50:10 14:50:10 11:24:46
    m 13 0 rw-r--- oracle dba oracle dba 481 2030043136 20322 25104 14:50:10 14:50:08 11:24:43
    m 10 0 rw-r--- oracle dba oracle dba 481 2030043136 20322 25104 14:50:10 14:50:08 11:24:40
    m 9 0 rw-r--- oracle dba oracle dba 481 2013265920 20322 25104 14:50:10 14:50:08 11:24:37
    m 8 0 rw-r--- oracle dba oracle dba 481 2063597568 20322 25104 14:50:10 14:50:08 11:24:34
    m 0 0xcace --rw-rw-rw-     root     root     root     root      0          2  2344  2344 14:49:57 14:49:57  9:35:43                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Need way to add multiple entries in PPOMA_BBP for Buyer reference

    We are looking at populating Positions in Organizational Responsibility for a given Purchasing group so that they appear at the top of all buyers.  We have 100s of positions that need to be defined for a single buyer, is there an CATT script or tool to populate these entries.  PResently this is done within PPOMA_BBP and only 3 blank entries are visible at one time.  Please help!!!
    SRM 4.0 EBP 5.0
    Thanks
    Bill Olliver

    The issue we have is our org structure spans companies in Europe, of which they have different buyers, assigning the buyers by org structure will not suffice as the users in Austria don't buy from the buyer in Italy for example.  We have had ZERO luck defining a way to default a buyer for the user, we are not using commodity codes /product category, so even if we gave everyone in Europe the 9 buyers, the system resets to the top buyer in the list if the category changes. Is there anything we can do to just allow the user to select a buyer for the default and allow that to be it going forward, regardless of product category changes??
    If not, then I am assigning the positions of the employees directly into the buyer responsible, this way they will have that buyer at the top.  Hence a means to perform this faster.
    thanks

  • Diable postal code for one time customer

    Hello
    I want to disable postal codes in sales order for  one-time customer. Normally it is required to input the postal code in sales order.
    How to disable it?
    May

    Go to IMG, Financial accounting, Accounts receivable and accounts payable, Customer accounts, Master records, Preparations for Creating Customer Master Records, Define account groups with screen layout (customers).
    Select one time customer account: CPDA (or CPD whichever is applicable)
    Select Group: Address
    select postal code and choose the appropriate entry like suppress / display

  • Purchasing report for one time vendor

    Hi,
    I am using ECC 6.0
    What standard report is available to display purchase order, GR and invoice belonging to one time vendor (CPD account group) ?
    Thanks for your help.
    Kind regards,
    Yann

    Special GL transactions (like down payments) are not allowed for one-time vendors.  Please refer to the following SAP Note.
    https://service.sap.com/sap/support/notes/19638

  • Dunning letters for one-time customer

    Hi,
    I have looked through the program of SAPF150V which F150 will execute the dunning and placed the customer data in MHNK.
    My issue is the customer address are drawn from master table, which one-time customer (customer id is shared by several customer, hence the address would be differently stored in SAP) may have problem since the address is not stored in the standard SAP master table.
    Apart from changing the calling program, is that anyway to do the configuration in order to cater the one-time customer dunning process?
    Thank you in advance for advice.

    Hi,
    The only difference in the process of dunning for one time customer and normal customer is that, the dunning frequency for one-time accounts is not checked in the master record but for each individual document.
    Apart from this, there is no specific configuration as such for dunning of one time customer.
    You can refer the below link:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/01/a9c58a455711d182b40000e829fbfe/frameset.htm
    Regards,
    Kiron Kumar T.

  • VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)

    Dear Colleagues.
    Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
    All help greatly appreciated,
    PAPJ1
    Error Log
                 0010056707 000000 Document 0010056707 saved (no accounting document generated)
                 0010056707 000000 Enter a name and city for one-time account postings
                Technical data
                    Tech. data details
                     Client
                     Group Number
                     Sales Document Number                  0010056707
                     Item Number of the SD Document         000000
                     Schedule Line Number                   0266
                     Counter in Control Tables              00
                     Message Identification                 F5
                     System Message Number                  266
                     Output Type                            E
                     Message Variable 01
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type

    Hi.
    The system logic is the following:
    In the master record of your one-time account, there is a field called
    'Reference account group'. The field status settings of the account
    group entered here are relevant for the one time vendor screen.
    Please note that even if the fields are changed from mandatory to
    optional if the NAME and CITY of the One Time Vendor is not filled, the
    system will still prompt the Error Message F5266.
    If you do not enter the name and city you will receive error F5266.
    The system logic here is to make sure that the name and the city being
    keyed-in properly for the Executive Information System reportings.
    Please note that it is hard-coded in the system.
    Check the following notes
    604312
    587806
    548834
    513748
    512360
    Also if you are using any bapi to post the document, you can  resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • Enter a name and city for one-time account posting is the message i get

    Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

    Hi,
    I didnt understand what u mean by "when i am trying to post a onetime vendor".
    Pl. specify whether you are:
    -Creating a OTV
    -Creating a PO for a OTV
    or
    doing any other transaction
    Regards,
    Prithviraj

  • How to create a sales order for one-time customer

    Hi all,
    I have a requirement where in creating a sales order, I have to add the tax code for one-time customer. This is not the tax jurisdiction but it is a text field that you can see in Further attributes and it will store in VBPA3 table.
    My plan was create sales order first using SD_SALESDOCUMENT_CREATE or BAPI_SALESORDER_CREATEFROMDAT2. Then I used BDC of va02 for changing the salesdoc. But the problem is, we can't proceed because there's a message "TAX HAVE REDETERMINED"  that it doesn't included in recording a transaction.
    Another one is, instead of calling the standard bapi, I used BDC for VA01. Again, upon recording there was anothe message popped up "FREIGHT REDETERMINED". And it's not in the recording so we can't proceed.
    Would you know what field is for the tax code when I use SD_SALESDOCUMENT_CREATE or any standard bapi? Is there other way aside from calling a standard bapi or bdc?
    Points will be given..Thanks!

    Good afternoon Bella,
    We are in a project that exactly need this solution. Could yoy please explain me how you solve the issue ?
    Kind regards

  • F-32 for one time customer code

    Hi,
    This is related with F-32 cusomer open item processing. It involves some of these document type....billing type RV , DA i.e. credit memo and many other. After processing open item if debit credit matches with differnce zero system easily post the clearing doc. But when there is difference system passes one document for balance amount. like if more of RV billing doc it will show receivable or vice cersa more of DA type doc it will show advance received right?
    Normally System automatically post document for this differnce figure. Document type AB i.e. now my customer will have open item with AB document type till next clearing. However in case of one time customer sytem simulates the documet. Pass first line item with document type AB for differntial amount but shows error 'correct first line litem before posting. '
    When i open that line item, it shows business partner data i.e. customer adress is blank and if you filled up that system allows to post.
    As per my analysis when i tried to do F-32 for other than one time customer code system flows this address (If more of RV
    balance then from RB Billing Type or advance received i.e. more of DA type then that corrosponding document.) But in case of one time customer code we do not maintain master and therefore systm can not find out that adress deatils and ask for it before posting docuemnt. This is as per logic and correctly understandable.
    But i want to know is there any other way or config through which system can automatically pick that adress data in case of AB document type for one time customer code?
    Kindly note that it happens only with one time customer code and all other customer codes are doing perfect.
    Kindly share your views.
    Regtards,
    Aks
    Edited by: Akshatavyas on Nov 24, 2011 12:04 PM

    Hi,
    Thanks for your response.
    But tell me one thing even adjustment document posting (doc type AB) system consider it as second transaction?
    I feel one thing strange that my users never found such problem earlier.
    I told them to find out any such scenario where system posted AB document for one time customer code.
    If not then being this is first time case can be accept.
    Secondly if volume is less then i don't think any abap development is required.
    Bcaz anywez we can manually enter those customer address data for AB document type.
    Regards,
    AKS

Maybe you are looking for