Multiple equipment in one Order / Functional location?
Hi,
i assigned the more than equipment in one functional location and When we entered the order we wanna add more than equipment.
is that possible? Order screen should be as follow;
Not possible,
Instead you can have an Enhancement tab to list the Extra Equipments or All Equipments by using User-Exit IWO10018. (Refer this to know how to do?).
Another option as mentioned by Sebastian Lenartowicz is to have all your Equipments as Objects in the Objects tab of the Order.
Jogeswara Rao K
Similar Messages
-
How do I create multiple prints in one order?
I am attempting to order multiple prints but as I order one picture the system immediately send (uploads) the order. I wish to include multiple pictures in one order.
What is the process?You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
Have you tried putting them in a folder and then try to upload the folder? -
Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?
Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai -
Updating Order Functional location data for equipment
We have scenarios where we keep de-installing equipments from one FL to another . We have mapped standing orders in equipment . The FL in standing order of this equipment doesn't change automatically . We have to manually do this (rightclick---update refrence object).
Is there any way we can update order's FL directly when we change equipment's FL in equipment.
NPBUSER EXIT : IEQM0003
FM-EXIT_SAPMIEQ0_001
Transaction code=IE02
Logic
Before equipment update (save)
1. Find value in standing order field. (EQUZ(put equipment number in EQUNR field) get ILOAN value put it in ILOA field and get DAUFN (standing order) )
a. If standing order value data found
i. Find functional location of the equipment (EQUZ (Table-input field EQUNR-fetch ILOAN) table (input field ILOAN to table ILOA output TPLNR) (A)
ii. Find the functional location of the order AFHI(Table)u2014(EQUNR is inut) u2013output ILOAN numberInput ILOAN in ILOA get TPLNR (B)
1. If A=B matching with that of FL of equipment being updated
a. u2013No action
b. Save equipment changes
2. If not matching A <> B
a. Save equipment
b. Update orderu2019s FL with that of equipmentu2019s FL through BDC (input order number DAUFN)
b. If standing order value not found
i. Do not take any action
ii. Save equipment changes
I can't update tables directly . I don't think any BAPI's exist to update objects in order . I can not execute a BDC from user exit . Now How to automate this ?
NPB
NPB -
Equipment list in a functional location
Hi,
My scenario is as follow:
I have a functional location with a equipment list. I have to create a maintenance plan that affects to all the equipments.
All the equipments have to be controlled with the same parameters.
How can I act?
Could I create an unique maintenance plan to the functional location or could I have to create a maintenance plan for ech equipment?
How can I check that all the equipments are controlled?
Best regardshi
it depends on your requirement only for example if you cost analysis is based on FL only ,then create one maintenance plan for that FL and attach the equipments in the object list ,hence once the call object is generated you can see the list of the equipment for maintenance activities,the cost incurred will be reflected to the FL
OR other thing is if all the equipments are to be maintained at regular interval with same parameter then create a maintenance plan with several maintenance item,in which system will create a call object for each maintenance item,drawaback is if you change any parameter ,then it will affect all the maintenance item attached to it
simple one is create maintenance plan for each equipment
regards
thyagarajan -
MAM25 Equipment (de) installation to functional location
Hi Guru's,
We are trying to uninstall an equipment from a functional location and then reinstall the same equipment to another functional location, however this does not always work for us.(mam25_030)
It seems to work, when the uninstall happens before the installation. It fails when installation happens before the uninstall. This is however dependend on the order on which the syncBO's are being handled, or so it seems.
- Floc with synckey 1 - uninstall equipment
- Floc with synckey 2 - install equipment
this works
But if the order is this:
- Floc with synckey 2 - uninstall equipment
- Floc with synckey 1 - install equipment
Has anyone come across this feature, and/or has a solution for this. Is there a way to influence the order of the syncBO's?
Thanks,
Karst
ps. Running on MAM25 SP15This can be achieved but obviously the equipment hierarchy would be disturbed because the equipment can either be installed on a functional location or a superior equipment not both the two. What you can do is the functional location for the superior equipment is to be extended so as to cover the subordinate equipments and obviously there would not be any direct link between the equipment and the superior equipment.
Equipment: Recorder installed on FLoc: Plant-Recorder
Equipment: Sensor installed on Floc:Plant-Recorder-Sensor
that is how you can achieve it but the relationship between the equipment and superior equipment is to be compromised.
Regards.. -
Standing order - Functional Location
Hi guys,
I have very simple question. What is a standing order for a functional location?
I currently have a requirement to automatically perform a goods issue movement 261(GI for order) and we are doing it by creating a characteristic field in the functional location.
We have a development that when a fuel consumption is done, the posting goes to the order it has saved as a characteristic.
However I went into the IH01 transaction and saw this Standing order field, and well if this field can work as an open order associated with a functional location then we wouldn't have any need for this development.
What is a standing order? Can we assign a standing order to a functional location so that it always posts material costs related to that functional location to it?
Thanks and best regards!
FernandoFernando,
Its basically a Order to continuously collect costs for on-going work, instead of creating a separate work order for each activity.Its often used in Fleet process to collect fuel consumption costs, when there is a need to know , at any point of time the total fuel consumption cost by vehicle/location.
The standing order field in the FL or Equipment is generally used when you want to default the settlement rule for the order with this value(Auto generate), when this object is associated to the order.
You could use this field for identification of fuel consumption costs for the vehicle , just be sure that for other maintenance orders for this object the standing order is not provided as default value in settlement rule by accident.
Regards
Narasimhan -
Equipment Not Allowed at Functional Location ( Inst. at FunLoc is selected)
Hi All,
I have configure Structure Indicator like XXXX-XXXXXXXXXXXXXX. Now I have maintain functional location label like
e.g ABCD-EFG XYZ ( there is a space between G and X) .
I have already allowed installation of all equipment category to functional locations at configuration. But still system gives me an error like Installing equipment is not allowed at functional location ABCD-EFG XYZ (MSG NO IA0002).
Now if I select ABCD system is allowing to install equipment at ABCD.
If space is a special character and i have not maintained S , then why system has created that label, it must throw an error while creating that label.
Please suggest.
Regards,
Anish AhyaEquipments can be installed at functional location if the following changes have been made
1. Configuration for equipment category installation (Already done in your case)
2. In the functional location master data in structure tab "equipment installation allowed" should be activated.
Please allow the equipment installation from functional location master data .
Regards,
Tehisn -
Assign equipment from hierarchy to functional location
Hi all,
I'm new to PM so the question might be a bit stupid. But I have got a hierarchy for a piece of equipment. The highest level is a recorder. The lower levels are sensors that i need to calibrate. I now want to assign the sensors (lower level) to functional locations. It can be possible that each lower level is assigned to another functional location. Is this possible? I now get the error message that the piece of equipment is assigned to a hierarchy.
Thanks for your helpThis can be achieved but obviously the equipment hierarchy would be disturbed because the equipment can either be installed on a functional location or a superior equipment not both the two. What you can do is the functional location for the superior equipment is to be extended so as to cover the subordinate equipments and obviously there would not be any direct link between the equipment and the superior equipment.
Equipment: Recorder installed on FLoc: Plant-Recorder
Equipment: Sensor installed on Floc:Plant-Recorder-Sensor
that is how you can achieve it but the relationship between the equipment and superior equipment is to be compromised.
Regards.. -
Multiple tasklist at one order
Hi every one i have a query that can we assign more than one task list to an order (equipment and general task lists). so that we can add operation of both task list simultaneously.
Regards
Abhishek
Edited by: abhishek sinha on Sep 16, 2009 2:28 PMHi,
In the operation tab Go to EXTRA -> Task List selection ..
select for general task list first search for required task list and select ,the task list operation will copied in the operation tab.
Do the same thing for the reference object .
System will give you a msg saying to delete the previous operation or not. select no.
DP -
Multiple Payors for One Order Line item. Is it possible?
Hello SD Gurus
I am trying to see if SAP allows inputting multiple payors for each sales order line item? We have a requirements, where the net value at the line item level will be split up in 1 to 4 payors and then we need to generate the invoices seperately for each of the payors based upon the dollar amount allocated.
If you have come across such scenario please let me know to accomodate such requirements.
Thanks much
JaiHi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai -
Multiple databases in one application with locations unknown
Hello everyone,
I am developing an application that uses several databases, one database for each user. The users, and the parameters for their database connections, are read from a configuration-file at runtime.
I would like to use JPA to access the databases. This is where the problem arises, because if I try to get an EntityManagerFactory, I have to specify a name; I just use <username>-pu. This causes a PersistenceException because "No Persistence provider for EntityManager named maarten-pu". Which is correct, because my persistence.xml contains no persistence units.
I cannot define all persistence units beforehand, because at that time the configuration-file is not yet read.
Does anyone know how to solve this problem?
Kind regards, and thanks in advance,
MaartenHello everyone,
I am developing an application that uses several databases, one database for each user. The users, and the parameters for their database connections, are read from a configuration-file at runtime.
I would like to use JPA to access the databases. This is where the problem arises, because if I try to get an EntityManagerFactory, I have to specify a name; I just use <username>-pu. This causes a PersistenceException because "No Persistence provider for EntityManager named maarten-pu". Which is correct, because my persistence.xml contains no persistence units.
I cannot define all persistence units beforehand, because at that time the configuration-file is not yet read.
Does anyone know how to solve this problem?
Kind regards, and thanks in advance,
Maarten -
PP Work Center ------ PM Functional Location, PM Equipment
Hi,
For a given PP Work Center , I want to have the table where details of PM Functional Location & PM Equipment are stored, in which the PP Work Center is used.
Thnx,
Shivaa.Hi Shivaa,
Go to T.Code : SARA and giving archive object : PM* + press F4 you will get the following
Try with the following tables:
PM_EQUI Equipment
PM_IBASE IBase
PM_IFLOT Functional Locations
PM_IMRG Measurement Documents
PM_MPLAN Maintenance Plans
PM_NET Object links, master data
PM_OBJLIST Serial Number History
PM_ORDER Service and Maintenance Or
PM_PLAN Routings
PM_QMEL Maintenance Notifications
From the above list click the suitable one and press database table tab. You will get all the relevant database tables.
Here you go...
If it is useful reward points
Thanks
Saravana
Edited by: K Saravana Kumar on Jul 30, 2008 8:25 PM
Edited by: K Saravana Kumar on Jul 30, 2008 8:26 PM -
Table Link between the Functional Location and work order
Hi Gurus,
I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
Thanks in advance
AnoopHi,
Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
-Paul -
ABC Indicator for Equipment & Functional Location Same or Different
Hi All,
We can find ABC indicators in both Equipment & Functional Location (FL) master data.
Q. Please tell me....whether these fields are different for Equipment & FL or same??
Problem is that I could see the same field name ABCKZ for both Equipment & FL in tables V_EQUI & ILOA respectively.
SundarHi Sunder
*The ABC indicator can be entered in equipment as well as functional locations.*
An indicator that is assigned by the procedure of ABC analysis.
The following ABC indicators are possible:
A - Important
B - Less important
C - Relatively unimportant
According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
Examples of use for ABC indicators are vendor master records, material master records, and master records of *technical objects.*
So ABC indicator is same for equipments and Functional LocationBUT value may be diferent
Regards
Jitender Suhag
Maybe you are looking for
-
Does any one know if iweb offers a feature to shrink the text box so it just fits around the text...I know how to do it manually but was wondering if there was an automated feature....I haven't found it or if iweb has a feature that allow you to lock
-
Problem with adding a new InfoProvider in Report Designer
Hey experts, I have a problem to add a new Infoprovider in Report Designer. I get the following message: Query consists variables. Please use a query view (variables are filled). Can anyone tell me what the problem is. Thanks in advance. Best Regards
-
What's the best way to save on a (sort-of) network?
We are a small town newspaper moving from paste-up to full pagination in InDesign. We have two ladies who design ads. We have an editor who writes copy and several others who type copy and do stuff like obits, etc. For the last zillion years every si
-
Hi there can anyone help me out. I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free, anyway I can find the router but no Internet connection?
-
More than 1 display for macbook pro
Is it possible, and if so how can you connect multiple(more than 1) displays to a new macbook pro 13"? It has to be able to run in bootcamp with windows aswell.