Multiple exception branches in a single block?

whats the use of making multiple exception branches in a single block inside BPM

hi all, thanks but pls clarify
if i have a block , i can define one exception(in the blocks attributes), and then how can i select multiple exceptions for each of my exception branches...
case: suppose block1 has exception as myError,
it has two exception branches, if i select myError for one branch, i cant select anything for the second exception branch....(the drop down list doesnt show anything)
null

Similar Messages

How can I create multiple front panels for a single block diagram?

Hello,
I have developed a VI with multiple controls and indicators that needs to run on computers with screen resolutions ranging from 800x600 to 1680x1050. The problem I'm having is that the front panel does not properly scale for this range of resolutions by checking the options in the "VI properties" option. Is there a way to create multiple front panels of various sizes for my block diagram and programmatically select the appropriate front panel based on the screen resolution?
Solved!
Go to Solution.

See the attached Zip file.
I have two different front panels. Open either one and run it. They both call MainCode.vi which takes the references passed to it and register for events. From there, it does all the work of the code you would have put in your front panel .vi.
This way each front panel can be laid out however you want for each screen resolution.
Attachments:
MainCode.zip ‏22 KB

Bpm exception branch not triggerd

Hello,
I have defined an exception + corresponding exception branch in my bpm block.
In my bpm processing steps I have assigned the above mentioned exception as system exception.
My problem is that if one of my processing steps fails, the exception seems not to be triggered.
For example I have a mapping step that fails, but the bpm simply continues the next processing step instead of jumping to the exception branch.
I seem to be missing something, any ideas?
Thanks
Matthias
P.S.: We are on PI 7.11 patch level 6.

1) Open your BPM in ESR and do a check on it...press F7...check if you get any warning messages.
2) Try to delete the BPM instances from SWWL transaction and then again test
3) there is a note for this problem (1086654) but it is limited till PI7.1
I have defined an exception + corresponding exception branch in my bpm block.
You should have included the Exception handler in the Exception Branch, Transformation Step.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 9, 2010 9:15 AM

Exception branch in a block without cancelling the process

Hi all.
I have an integration process with a Block where I process a multiline message interface. Inside the block, exception branch for controlling errors is used. When exception is thrown, the process of the pendant elements in the block is canceled. Is any way possible so that the pendant messages in the block can be processed after the error?
Thanks,
Gari.

Hi Gari,
yes, put 2 blocks in boxes. Outside block is multiline (looping) inside block is processing a single message using the exception branch. Dont stop the process at exception.
Regards,
Udo
Message was edited by:
Udo Martens

How to get details about Exception catched in Exception branch of the Block

Hello Experts,
Is it possible to get details about Exception catched in Exception branch of the Block in Integration Process (BPM)?
In the Exception branch System Error is catched, but from time to time different type of System Errors are happening during sync call to WebService - Connection Timeout, Connection Refused, UnknownHost, etc.
So the task is somehow to map the type of System Error to the response. I was trying to create a mapping using as source the message which is coming from the Adapter after the sync call, but the mapping is failing with "No Source Payload" error.
Maybe the description is somewhere in Header or Dynamic configuration?
Or it is possible to access it somehow with JAVA-maping?
Thanks for your help!

Hey,
the message from the exception can be utilized by using alerts(in order to mail,sms r fax). but otherwise its not possible using mappings or container.
check this link for alert configuration.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step

Hi, exception branch of a block

If I define a exception branch for a block such as DB error. Do I need to send DB error message to the Integration process to stop it when error occurs?
I'm not sure about how the exception here works.
Thanks, guys.

Hey,
I'm not sure about how the exception here works
Nice thread on BPM exception handling..
check this..
Re: Exception Handling
Thanks,
Vijaya

Which messages of soap call processes the block exception branch?

Hi guys!
I'm testing a scenario, where I use BPM, have a block, sync web service call inside and have exception branch, which sends original message to the dest system. I'm a little bit confused, cos' I'm not sure, which error messages does exception branch process. Is it only system error? Or is it also application error - means: fault message is returned..
Thanx, Olian!

ok, If I send 0 as parameter, I get exception:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <SOAP-ENV:Body>
      <SOAP-ENV:Fault>
         <faultcode>SOAP-ENV:Client</faultcode>
         <faultstring>Division by zero</faultstring>
         <detail>
            <ns1:div_test.CalcException xmlns:ns1="urn:CalculatorWsd/CalculatorVi" xmlns:pns="urn:test">
               <pns:message>Division by zero</pns:message>
            </ns1:div_test.CalcException>
         </detail>
      </SOAP-ENV:Fault>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
But When I send one string parameter, I get
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <SOAP-ENV:Body>
      <SOAP-ENV:Fault>
         <faultcode>SOAP-ENV:Client</faultcode>
         <faultstring>Deserializing fails. Nested message: XML Deserialization Error. Can not create instance of [java.lang.Integer] with parameter [ee]..</faultstring>
         <detail>
            <ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException xmlns:ns1="http://sap-j2ee-engine/error">Deserializing fails. Nested message: XML Deserialization Error. Can not create instance of [java.lang.Integer] with parameter [ee]..</ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException>
         </detail>
      </SOAP-ENV:Fault>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
So, these are two possible exceptions... How to get them? Both are two different message types
OR: hot to get detail text to send it to receiver? What steps need to be in the exception branch?
O.
Olian.

Multiple DataBase Connection in a Single Form

hi all
Is it Possible to have Multiple Database Connection With a Single Form
Block a : Retriving data from a database Service a/Schema A.
Block b : Retriving data from a Remote Database Service b / Schema B.
If yes how to do this.
regards
jai
email:[email protected]

Sure you can access a database this way,
but can you base a block on this database connect? No you can't.
Frank

Multiple PO's for a single PR reg

Hi,
The system incorrectly allows multiple PO's for a single PR.Then,I configured message no 00 06 076 & 400 as a error message and system is not allowing mutiple PO's for single PR and if PO Qty is greater than PR it's not allowing and it's ok.
Now the issue is If PR qty is 2 and as per requirement 1 qty for one vendor and one more qty for some other vendor and two PO's are to be created and the system is not allowing and throwing error message.
Can you pl.throw some light on this issue.

Hi
It is not incorrect to have multiple POs for single vendor as we might have different vendors for the same item. Secondly the message setting what you have on 00/06/076/Materials of requisition & item & alr. ordered in full- E is used to stop POs being created from the PR once PR quanitity gets consumed.
Now i do not think system will ever stop you from allowing to create multiple POs for a PR if you are distributing the Quantities between different vendors.
By setting the message 00/06/400/Materials/services for requisition & & already ordered with & & to E mode you are blocking the PO creation with altaernate vendors change it to warning mode.
Regards
Edited by: samuel mendis on May 8, 2009 8:42 AM

How to handle multiple exception types in JSF 2?

I'm trying to handle multiple exception types in JSF2, including a default error page for any unexpected exception types. The problems I'm having are:
1) ViewExpiredException is handled only when no generic exception handler is specified
2) "Regular" exceptions like NullPointerException are never handled
My managed bean:
@Named
@SessionScoped
public class MyController implements Serializable {
/* A method that does nothing */
public void doNothing() {
    //do nothing
/* Generate a null pointer exception on purpose */
public void generateNpe() throws NullPointerException {
    Object x = null;
    x.toString();
My test page to generate the exception:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core">
<h:head>
    <title>Test page</title>
</h:head>
<h:body>
    <h:form>
        <h:commandButton id="button1" value="do nothing" action="#{myController.doNothing}" />
        <h:commandButton id="button2" value="generate NPE" action="#{myController.generateNpe}" />
    </h:form>
</h:body>
</html>
My web.xml:

<error-page>
    <exception-type>java.lang.NullPointerException</exception-type>
    <location>/error/error003.jsf</location>
</error-page>

<error-page>
    <exception-type>javax.faces.application.ViewExpiredException</exception-type>
    <location>/error/error002.jsf</location>
</error-page>

<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/error/error001.jsf</location>
</error-page>My questions are as follows:
1) How can we handle "regular" java exceptions like NPE?
2) How can we define a catch-all for unexpected exception types, while still respecting specific exception handlers for VEE, etc?
Thanks,
Benjamin

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

How can we handle Exception Branch in BPM effectively

Hi,
I want to capture errors occurred in PM during runtime by using special "Exception Branch".
For example If i define exception branch for one black then any step within that block thrown error then automatically it calls that corresponding exception branch within that block. Now i want to identify which step within that block has thrown error and what is the error.How can i achieve this?
Thanks and Regards,
Sudhakara

Hi Sudhakara,
Generally we use control step to raise an exception, Please go through this link for better understanding:
http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm
Also,
Exception Handling:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
I hope it helps,
Thanks & Regards,
Varun Joshi

Splitting multiple IDoc XML files into single IDoc messages for R/3

Hi all. I have a problem splitting IDoc XML files coming in to XI. I currently have an interface that takes in single store sale IDoc transactions (type WPUBON01) in an IDoc XML file. I then have some complex graphical mapping on the IDoc before sending to R/3 via the IDoc adapter. This works fine. However, we now wish to include multiple sales in one file i.e. many WPUBON01 IDocs. I could use message splitting to do this BUT the mapping is so complex, I do not wish to have to change it to enable the processing of many IDocs in one file instead of just one.
What I want to do: have one mapping splitting a multiple IDoc XML file into single IDoc messages and then another taking these single messages as before and performing the mapping. I cannot find a way to do this in one interface; the main problem I'm having is getting XI to split the multiple IDocs into many single IDoc messages within XI itself. I'd be very grateful for any advice on the best way to do this.
Thankyou.
Stuart Richards (Halfords, UK)

Bhavesh,
Thanks again for a clear explanation... I'm moving forwards but still struggling. I've been on this all afternoon today (after a break on other things) and just cannot get my message to split properly (though the SOAP adapter problem I had earlier is now fixed!). If my initial IDoc XML file contains this format:
<WPUBON01><IDOC>....</IDOC>
<IDOC>....</IDOC>
<IDOC>....</IDOC></WPUBON01>
.. I'm not sure what the cardinaility on the first message mapping and interface mapping should be. I'd have thought the source interface would be 1 and the target would be 0..unbounded but this isn't working. I'm trying different things but I get different errors each time. Currently, I have the above cardinality in my first interface and I'm passing in the following data:
<WPUBON01><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832292</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160633</VORGZEIT><BONNUMMER>1001</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1001</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832293</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1002</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1002</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832294</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1003</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1003</ZUONR></E1WPB06></E1WPB01></IDOC></WPUBON01>
In the message monitor, I get a chequered flag. Great. However, I get the dreaded error 500 in the SOAP receiver comm channel:
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Exception caught by adapter framework: SOAP Error
Delivery of the message to the application using connection AFW failed, due to: SOAP Error.
Any ideas as to what this might be?! I'm getting there.... if I get a solution out of this, I promise to write the blog myself!
Cheers
Stuart

Step repeated in Exception branch requires exception handler, why?

I have a BPM Integration process with a sync send step calling a RFC. Any system errors and application errors are handled by an exception branch where I send an alert as then re-do the send step (so that it will fail but allow me to restart from that point after fixing the issue). The problem I am having is that in this send step, since it is mandatory to have an exception handler for application errors (defined fault message RFC.Exception), what do I enter for exception handler in this send step which is itself in an exception branch? I do not want to handle the exception this second time since I want this step to fail and process stops here to be able to restart manually later.

Hi,
I am not sure, how you will restart the step manually? Because once there is an error in the sync send, the message will turn to "Cancelled" status. You cannot restart this message.
Now, for the second send step in the exception block you will not be able to choose the same exception block in the exception handler field. But for some reason if this send also fails then you cannot restart the process manually - same reason i mentioned above. It will fail as you intended it to do so.
Regards,
Balaji.M

BPM not entering exception branch

Hi,
In BPM I have a timeout problem. I am calling asynchronously a JDBC receiver inside my BPM. This step is in a block. And I put there an exception and an exception branch. Now when my jdbc failes (in RWB I see the error) my bpm still continues without entering exception branch. After that I set the Acknowledgment in the sender step of the JDBC to Transport. This time it starts to wait and again doesn't enters the exception branch.
How can I get that the process enters the exception branch?
Thanks.

In the case of an asynchronous send step, the exception will only be triggered if an error occurs during the transfer to
the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
Your requirement is to catch an exception that may occur while sending to the DB from the Channel....and for this you have set Acknowledgement to Transport and used an Exception Branch.
Now in the Block enclosing your Send Step you have to first put a Deadline Branch....this deadline Branch will wait for the entire retry interval of your Channel.....in this Deadline Branch you have to put a Control Step which will Throw Exception
Now this exception will be caught by the Exception Branch....then in the Exception Branch have your Exception Handler.....this is how we design the BPM when we have to catch the exception from an Async Send step.
Be it Deadline Branch or Wait step....the minimum time-interval is 1 min!
Regards,
Abhishek.

Scripts/multiple queries in one CF Query block in Oracle

Greetings:
I am primarily an MS SQL programmer and I am wondering how to
run multiple query statements inside a single cfquery block. For
example, on MS SQL I can do multiple delete statements, or an
update and select within one cfquery block, but I get an error
whenever I try to do this on ORACLE. Is there a way to accomplish
this on ORACLE?
thanks!

Your best bet would be to use multiple CFQUERY tags within
CFTRANSACTION tags if you want them all to be handled in a "block"
or "session". Or, put all of your SQL statements in a PL/SQL stored
procedure.
Phil

Multiple exception branches in a single block?

Similar Messages

Maybe you are looking for