Multiple field population bound to xml

Does anyone know how to populate multiple fields from data binding, most of all of these forms and how to only populate one field of data i am losing the connection when it comes to connecting the second, third, etc fields to the data of the xml?

Well that is just it, i have only one Data Connection it loaded a 6 column xml, basically when you choose the EMPLOYEEID on change event i need it to populate the 5 other fields
EMPLOYEENAME
JOBTITLE
DEPARTMENTNAME
DEPARTMENTNUMBER
DATEOFEMPLOYMENT
with the script i have i can only make it populate the EMPLOYEENAME and i am guessing because my script on carries to one bound item, i need help knowing how to tell it to change the other 5 too.!!! i have googled and tried a 100+ scripts all only work for the first field.
This is what i have for the one field.
in EMPLOYEEID field on change i have
EMPLOYEENAME.rawValue = this.boundItem(xfa.event.newText); which of course i only binding one field how can i bind all the fields, or i have tried this one which is all manual data fill in, how do i tell the things in ""'s to look at the data connection???? my xml, what am i missing as far as connecting the fields to change on employeeid.
var EMPLOYEEID = xfa.event.newText;
if (EMPLOYEEID == "0029904");
EMPLOYEENAME.rawValue = "ADDILIA ROBBINS";
DEPARTMENTNAME.rawValue = "Department Of Public Safety";
DEPARTMENTNUMBER.rawValue = "130";
JOBTITLE.rawValue = "POLICE RECORDS TECH I";
DATEOFEMPLOYMENT.rawValue = "2013-04-29";
The fields are bound to the right columns in the xml but i cant get them to change when i select the primary employeeid.???
HELP PLEASE.

Similar Messages

Bind multiple fields to one node in data view

I have a need to have an interactive form where data from a single data source is displayed in multiple fields on the form. In addition these fields are open for input. I have bound the multiple fields on the form to one node in the data view. The data is being displayed in the multiple fields. This form is being routed thru workflow so various agents are updating the form. The problem that I am having is that the form only seems to allow input in the first field on the form but not the other fields that are tied to the same data source. For example, field A and field B are bound to node SUMMARY. I can add/change/delete data in field A but not in field B. After I have done some entry in field A, I can then sometimes make changes in field B. We have a requirement that field A be enabled for agent #1 but field B is invisible. Later in the workflow, agent #2 needs to make final changes on a "summary" page so agent #2 had field B enabled.
Does anyone have any idea how to correct this data entry issue so that data can be entered into either field that is tied to a single node?

Having multiple fields in the backend is not an option. I will not go into the business reason in detail but the last page of the form contains a final version of data pulled from various locations on the form where the data on the other pages was input by multiple agents in the process flow. The last agent in the workflow needs to put the "finishing touches" to the data and should not have to search all over in the form to find the appropriate data fields.
I have found 2 possible solutions and would like to know if anyone can recommend one over the other.
First solution - bind multiple fields on the form to one node in the data view. This seems to work correctly on the form and data can be entered into either field, with the data being passed back to the webdynpro context in the one node in the data view (corresponding node in WD context).
Second solution - the node/attribue in the WD context must have the same name as a DDIC element. The node in the data view must have this same name. The field names on the form must also have the same name. Define the binding for the field names as Global. I have not validated that the data is passed back to the WD.

Bind repeating data to multiple fields

I am a livecycle numpty and I need some help! I am developing a readonly report. This report is using sample xml for databinding. Within the xml I have a repeating group - example:
<group>
 <groupItem>
 <addres>parp</address>
 </groupItem>
 <groupItem>
 <addres>parp</address>
In my report I have two sections that need to reference this repeating data. One section works and the other doesn't. I've read that you can't bind repeating data to multiple fields. How do I get around around this? I can't seem to get the global binding to work (is this purely for user entered data???)
Please help!
Cheers,
Rich

one way to do this is, in the Initialize event of the field in second repeating section, assign the rawValue from the first repeating section..
For example..
initialize event of Field2..
 Field2.rawValue = Field1.rawValue;
Other way is to read the XML tags and assign the value to the fields..
You need to loop thru the group element and read each group item value and assign the value to the field..
Field2.rawValue = xfa.resolveNode("$record.group.groupItem").value; //this command will only read the first occurance of the groupItem value.
Thanks
Srini

UIX LOV: How to Design an LOV that provides lookup value to multiple field

Hi,
I've have an input form which has following fields.
1) Task Name1: (input lookup field. invokes LookupTask.uix)
2) Task Name2: (input lookup field. invokes LookupTask.uix)
3) Task Name3: (input lookup field. invokes LookupTask.uix)
4) TaskId1 (hidden form field. tied to field Task Name1)
5) TaskId2 (hidden form field. tied to field Task Name2)
6) TaskId3 (hidden form field. tied to field Task Name3)
the way I intend to have the LOV work is as follows:
The three Task Name input fields are populated by using the same LOV page LookupTask.uix. The user will select a task name from the LOV page.
When the user invokes the LoV against the TaskName1 field, and selects a value from the LoV and closes it, then it should transfer the task name from the LoV to the Task Name1 field and the corresponding task id to TaskId1 hidden field on the input page. If the LoV was invoked from the TaskName2 field, then the lookup values should be transferred to the TaskName2 and TaskId2 fields correspondingly.
I am able to make it work if there is just one pair of field, i.e. TaskName1 and TaskId1. I'm not able to make it work with multiple fields served by the LOV window.
any suggestions on making this work will be greatly appreciated.
thanks
Lalit Agarwal

Lalit -
Have you tried setting the onLovSelect attribute on the lovInput to a javascript callback function that populates the hidden form fields?
Matt Lee
UIX Team

Auto Suggest with multiple fields?

Hello,
I am planning on using the autosuggest on a project I'm
working on, and was surprised by the lack of support for multiple
fields. Correct me if I'm wrong, but right now you can only search
for the 'name' field or 'age' etc. I would like to be able to enter
some text in the textinput field, and it would search both 'name'
and 'username' in the dataset. Is this possible with the current
widget?
Thanks,
Maquelly

Hello Maquelly,
Indeed the Auto Suggest widget do not support filtering the
data against multiple fields simultaneously if the data is filtered
on the client side. I will add this as an enhancement request for
this brand new widget. We have only support for multiple fields to
be displayed in the suggestion list which is a spry:region, you can
insert the values of multiple fields concatenated through the
spryLsuggest tag buy we are not able to check multiple fields,
We have implemented also the ability to send the value typed
on the server and expect a new XML with the filtered data. This
method allow you to achieve your goak as you can control
completelly the filtering algorithm that sends the data back in
browser. We have some samples in the Spry 1.5 preview.
Regards,
Cristian MARIN

Multiple Field as a Part of the Single Search

WOW, Jheadstart is the way to go!!
Here is a quick question to expedite my learning process if you don't mind since my customer needs to see something in couple of weeks.
I created a single search screen from a group based on what has been generated by the Jheadstart Designer, but only one field is generated. Now, at this point, is there a way to have multiple field generated or I need to customize the generated JSP or UIX screen? Same things for the methods that are involved, will I need to customized certain Action Class methods to include to two attributes as a part of this search.
I thank you for your explanations and would greatly appreciate any sample codes available that you can refer to or explain.
Kamran

hi,Shalini.
Using Message directly, you can not achieve what you want easily.
Instead, i thought out one way, you can judge and check whether it can help you a little.
You don't use the Message manager directly, that means: don't display your message.
Now, you have one context attribute named "context_msg" which has type "String".
In addition, you have defined one Link-to-action UI element which is bound with the context attribute "context_msg".
When you get the message, use the following
message e001(ID) with <variable> into lw_msg.
or if you use Exception class
lw_msg = lo_exp->get_text( ).
Then you can set the context attribute "context_msg" with the "lw_msg".
Now, you can implement your action handler for the action of Link-to-action as you want, i.e. open another pop-up window.
I don't know whether it can fit your requirement or not.
Hope it can help you a little.
Best wishes.

Sending an Email with a cursor that returns multiple fields.

I was investigating about sending emails from apex, and I'd like to know if you can help me, I need to send an Email report with multiple fields, I m using this code :
DECLARE
CURSOR c1 is
select id,gk,creation_date,sr_count,issue_notes,sr_impacted,oldest_creation_date
from gk_report where id = (select max(id) from gk_report);
reg c1%ROWTYPE;
begin
IF (c1%ISOPEN = TRUE) THEN
CLOSE c1;
END IF;
OPEN c1;
FETCH c1 INTO reg;
CLOSE c1;
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => 'Hourly GK Log',
p_body_html =>
'GK: '||to_char(reg.gk)||' 
CREATION DATE: '||to_char(reg.CREATION_DATE,'DD-MON-YYYY HH24:MI:SS')||' 
SR COUNT: '||to_char(reg.SR_COUNT)||' 
ISSUE NOTES: '||to_char(reg.ISSUE_NOTES)||' 
SRs IMPACTED: '||to_char(reg.SR_IMPACTED)||' 
OLDEST CREATION DATE: '||to_char(reg.OLDEST_CREATION_DATE,'DD-MON-YYYY HH24:MI:SS'),
p_SUBJ => 'Hourly GK Log: ' || to_char(reg.CREATION_DATE,'DD-MON-YYYY HH24:MI:SS'),
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
end;
In this code there is a cursor that returns just one field, But what about if the cursor returns multiple fields, How can I insert a Loop into this code.?
Thanks,
Pablo.

Hi,
DECLARE
p_collection_name VARCHAR2(9000) := 'Report_collection';
begin
IF (apex_collection.collection_exists(p_collection_name => p_collection_name)) THEN
 apex_collection.delete_collection(p_collection_name => p_collection_name);
END IF;
apex_collection.create_collection_from_query(
 p_collection_name => 'Report_collection',
 p_query => 'SELECT DISTINCT AUD_SR AS SR, C.USER_NAME AS AUDITOR, F.ERROR_NAM , A.AUD_OBSERV AS AUDIT_OBS,D.FEEDBK_OBSERV AS FEEDBACK_OBS , E.ANALYSIS_OBS ,A.AUD_STATUS
FROM AUDIT_PROCESS A, MICC_AT_DATA B, MICC_AT_USER C, FEEDBACK_PROCESS D, MICC_AT_ANALISYS E, MICC_AT_ERROR F
WHERE B.DATA_MONTH = :P27_MONTH AND B.DATA_SR = A.AUD_SR AND C.ID = B.DATA_AUDITOR AND F.ERROR_ID = A.AUD_ERROR AND A.FEEDBACK_COD = D.FEEDBACK_COD AND D.FEEDBK_AGREE = 'N' AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR');
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => p_collection_name ,
p_body_html => '',
p_SUBJ => 'hi',
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
END;
Error
ORA-06550: line 18, column 176:
PLS-00103: Encountered the symbol " AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR" when expecting one of the following:
) , * & = - + < / > at in is mod remainder not rem
<> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
The symbol "," was substituted for " AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR" to continue.
1. DECLARE
2. p_collection_name VARCHAR2(9000) := 'Report_collection';
3. begin
I got out the 'N' quotes of the N :
DECLARE
p_collection_name VARCHAR2(9000) := 'Report_collection';
begin
IF (apex_collection.collection_exists(p_collection_name => p_collection_name)) THEN
 apex_collection.delete_collection(p_collection_name => p_collection_name);
END IF;
apex_collection.create_collection_from_query(
 p_collection_name => 'Report_collection',
 p_query => 'SELECT DISTINCT AUD_SR AS SR, C.USER_NAME AS AUDITOR, F.ERROR_NAM , A.AUD_OBSERV AS AUDIT_OBS,D.FEEDBK_OBSERV AS FEEDBACK_OBS , E.ANALYSIS_OBS ,A.AUD_STATUS
FROM AUDIT_PROCESS A, MICC_AT_DATA B, MICC_AT_USER C, FEEDBACK_PROCESS D, MICC_AT_ANALISYS E, MICC_AT_ERROR F
WHERE B.DATA_MONTH = :P27_MONTH AND B.DATA_SR = A.AUD_SR AND C.ID = B.DATA_AUDITOR AND F.ERROR_ID = A.AUD_ERROR AND A.FEEDBACK_COD = D.FEEDBACK_COD AND D.FEEDBK_AGREE = N AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR');
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => p_collection_name ,
p_body_html => '',
p_SUBJ => 'hi',
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
END;
Error : ORA-20104: create_collection_from_query Error:ORA-20104: create_collection_from_query ParseErr:ORA-00904: "N": invalid identifier
If you can help me would be great, and if you see another mistake please let me know i have not may reach out the solution about it.
Thanks,
Pablo.

[Forum FAQ] How to use multiple field terminators in BULK INSERT or BCP command line

Introduction
Some people want to know if we can have multiple field terminators in BULK INSERT or BCP commands, and how to implement multiple field terminators in BULK INSERT or BCP commands.
Solution
For character data fields, optional terminating characters allow you to mark the end of each field in a data file with a field terminator, as well as the end of each row with a row terminator. If a terminator character occurs within the data, it is interpreted
as a terminator, not as data, and the data after that character is interpreted and belongs to the next field or record. I have done a test, if you use BULK INSERT or BCP commands and set the multiple field terminators, you can refer to the following command.
In Windows command line,
bcp <Databasename.schema.tablename> out “<path>” –c –t –r –T
For example, you can export data from the Department table with bcp command and use the comma and colon (,:) as one field terminator.
bcp AdventureWorks.HumanResources.Department out C:\myDepartment.txt -c -t ,: -r \n –T
The txt file as follows:
However, if you want to bcp by using multiple field terminators the same as the following command, which will still use the last terminator defined by default.
bcp AdventureWorks.HumanResources.Department in C:\myDepartment.txt -c -t , -r \n -t: –T
The txt file as follows:
When multiple field terminators means multiple fields, you use the below comma separated format,
column1,,column2,,,column3
In this occasion, you only separate 3 fields (column1, column2 and column3). In fact, after testing, there will be 6 fields here. That is the significance of a field terminator (comma in this case).
Meanwhile, using BULK INSERT to import the data of the data file into the SQL table, if you specify terminator for BULK import, you can only set multiple characters as one terminator in the BULK INSERT statement.
USE <testdatabase>;
GO
BULK INSERT <your table> FROM ‘<Path>’
WITH (
DATAFILETYPE = ' char/native/ widechar /widenative',
FIELDTERMINATOR = ' field_terminator',
For example, using BULK INSERT to import the data of C:\myDepartment.txt data file into the DepartmentTest table, the field terminator (,:) must be declared in the statement.
In SQL Server Management Studio Query Editor:
BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
WITH (
DATAFILETYPE = ‘char',
FIELDTERMINATOR = ‘,:’,
The new table contains like as follows:
We could not declare multiple field terminators (, and :) in the Query statement, as the following format, a duplicate error will occur.
In SQL Server Management Studio Query Editor:
BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
WITH (
DATAFILETYPE = ‘char',
FIELDTERMINATOR = ‘,’,
FIELDTERMINATOR = ‘:’
However, if you want to use a data file with fewer or more fields, we can implement via setting extra field length to 0 for fewer fields or omitting or skipping more fields during the bulk copy procedure.
More Information
For more information about filed terminators, you can review the following article.
http://technet.microsoft.com/en-us/library/aa196735(v=sql.80).aspx
http://social.technet.microsoft.com/Forums/en-US/d2fa4b1e-3bd4-4379-bc30-389202a99ae2/multiple-field-terminators-in-bulk-insert-or-bcp?forum=sqlgetsta
http://technet.microsoft.com/en-us/library/ms191485.aspx
http://technet.microsoft.com/en-us/library/aa173858(v=sql.80).aspx
http://technet.microsoft.com/en-us/library/aa173842(v=sql.80).aspx
Applies to
SQL Server 2012
SQL Server 2008R2
SQL Server 2005
SQL Server 2000
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do I move multiple fields from the end of the document to another section?

For some reason when I click Cntrl+V, it pastes the multiple fields at the end of my form rather than at the point of paste within the document.

Select all of the fields that you wish to copy then use Ctrl-C. Scroll to the part of the form where you want to paste the copied fields. Select the field that you want the paste to occur after (ie, the pasted fields will appear after/below the selected field) and use Ctrl-V.
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

Writing multiple arrays to a single xml file at seperate times without overwriting the previous file?

Hi my name is Dustin,
I am new to labview and teststand... I am trying to right multiple arrays of data to a single xml file. I can do this with a cluster but I have to create a variable for each of those arrays (21 arrays) and I was hoping to use the same variable for each array. Meaning I obtain my array of data write it to an xml file then replace that array in that variable with a new array and then call up my VI that writes that array to an xml file and write it to the same xml file underneath the first array without overwriting it. Attached is my VI I created to write an array to an xml file. Again I am wondering if there is a way to write multiple arrays to a single xml file at different times without overwriting the previous xml file.
Thanks
Solved!
Go to Solution.
Attachments:
Write_to_XML_File.vi ‏11 KB

Hi dlovell,
Check the attached example. I think it may help you.
Regards,
Nitz
(Give Kudos to Good Answers, Mark it as a Solution if your problem is Solved)
Attachments:
Write to XML.vi ‏17 KB

How can I create a search plugin for multiple fields

There are a number of sites that have search capabilities but they require entries into multiple fields.
One such site is for instance the IBM Employee directory.
(http://www.ibm.com/contact/employees/servlets/lookup)
On this site - in order to get usable results - I have to enter both First name and Last name of the employee I'm looking for.
I created a search plugin for the site, however I wasn't able to split the entered text into two parts and provide them as separate fields for the form.
Is there a way to do this?
Regards,
Imre

Hi,
This is excellent. Not search-plugin though but but this is as good as a search-plugin. (Even better, as I haven't seen any solution with the plugins for the problem.)
I didn't know that it was possible to use javascript as bookmark location.
Thanks,
Imre

List View Bound to XML Map Data

HI Have a list view that is bound to xml mapped data. It seems that on connection refresh that new data is not being updated into the SWF. My Binding is directly onto the cell ranges that are mapped into excel, so on updates the size of the maped table changes/rewrites over the old data.
When I refresh I am not picking up the newest data in the list view. Any thoughts on this on how I can fix.
Regards,
Mark

Thank you Ganesh, but I am not on Enterprise edition. I am successfully bringing in live xml data, however mapping more than one Query result from one xml file is giving my project some problems. Refreshing a list View I think is causing this issue. From within my project in design view I can Refresh the data.
When I publish the file to html/SWF when I refresh other components are refreshing but the list view and one other is not refreshing.....

How to open a pdf package in browser when multiple files are bound together.

Hi,
I have to open a pdf package in browser that contains multiple pdf files any suggestions will help me a lot.
Thanks.

It shows me a page says "Multiple files are bound together in this PDF package"

I have a PDF form that I want to pre-fill multiple fields with example text that disappears onFocus. Is there a way to do this?

Pretty much what my subject line says. My client wants example text in the fields of a PDF form that will disappear when the cursor enters the field. When I try this with show/hide layers, the layer becomes visible as soon as I enter form editing mode, and the action doesn't work properly. Any help? I was able to get it to work with a single field, but multiple fields with example text on multiple layers doesn't work for some reason.
Thanks for any help.

Hi Jeffrey ,
You need to use a custom Format script for the field.
Regards
Sukrit Dhingra

Multiple field population bound to xml

Similar Messages

Maybe you are looking for