Multiple Flash Changers

Hi All, I have a flash image changer built in to an allwebco
template. works fine, however I have created duplicates of the
index as it is the best page and I want to have different photo
changes on each page. I am told that I need to have multiple image
changers which is logical and I have Adobe CS3 but am stuck as I
need to know how to create and link to each to each new page. Any
ideas thanks in advance.

Hi Supriya
I had created two separate views with flash islands. Then created a single view and embedded those two using two viewcontainerui elements. Eventhough I had rebuilt the project and deployed, it did not show me the second one.
Finally I renamed the second swf file, rebuild the project and it was working fine.
Regards
Vidyadhar

Similar Messages

Multiple flash galleries in catalyst

similar version of a question I posted earlier...
I'm using flashcatalyst and importing slideshowpro lightroom galleries (swf files that call xml files). is there a way to have flash catalyst look not just in the root directory for an SWF's xml files? I can't put multiple galleries in one catalyst file, because I can't seem to get it to look for XML files within directories.
either that, or I'd take any solution toward the end of having multiple flash galleries in a single flash site.
thanks,
aemilia

Chris, first of all, thank you so much for replying! Thank you thank you.
Yes, there is a slideshowpro.swf, and a params.xml and images.xml it seems that slideshowpro.swf wants to look in the directory of the html file, not the relative path of the swf, for the xml files. I had a long chat with slideshowpro support about this, and we tried changing the base param within the HTML file, but it didn't inherit itself all the way to the slideshow pro swf. But I digress...
I actually tried almost the same thing already, but not exactly. Tell me if this make sense:
I built the fancy swf in flash catalyst, and imported the swf in flash catalyst. (I didn't wait until flash builder). Then, knowing what little I know about flash builder, I opened the FXP there, and imported the separate folders into the project structure in the left column (I added assets/images/gallery-headshots/slideshowpro.swf, assets/images/gallery-editorial/slideshowpro.swf).
Then, I clicked on the swf in the state I was focusing on, and changed the "source" field in the right column to the *new* location of the swf within the file structure I imported. I did this simply because I didn't know enough about flash builder to import and place an swf asset myself. This didn't work, unfortunately.
Does that make any sense?
Thanks again,
Aemilia

Multiple flash files change when a button click using javascript function

hi.. am new in flsh...
i want to multiple flash files change when a button click using a javascript

<script>
var count=0;
function mafunct(newSrc){
    alert("hi");
var path="a"+count+".swf";
flash+='<OBJECT CLASSID="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" CODEBASE="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" WIDTH="100%" HEIGHT="100%">';
    flash+='<PARAM NAME=movie VALUE="'+path+'">';
    flash+='<PARAM NAME="PLAY" VALUE="false">';
    flash+='<PARAM NAME="LOOP" VALUE="false">';
    flash+='<PARAM NAME="QUALITY" VALUE="high">';
    flash+='<PARAM NAME="SCALE" VALUE="SHOWALL">';
    flash+='<EMBED NAME="testmovie" SRC="Menu.swf" WIDTH="100%" HEIGHT="100%"PLAY="false" LOOP="false" QUALITY="high" SCALE="SHOWALL"swLiveConnect="true"PLUGINSPAGE="http://www.macromedia.com/go/flashplayer/">';
    flash+='</EMBED>';
    flash+='</OBJECT>';
count++;
alert(path+"aa");
</script>
<button onclick="mafunct()">next</button>

Multiple Flash player in One WebPage.

hi,
I tried to test Smart Seeking with multiple flash player in One WebPage.
So, Only one player is started and the others is buffering.
What's problem ?
I changed properties like 'MaxIOThread', 'MaxConnection'. but it's useless.
Please advice to me.
Thanks,

right!
here is my source.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<htm style="width:100%;height:1000"l>
<head>
<title>Smart Seeking</title>
<script type="text/javascript">
var flashid = 0;
function flashWrite(url,w,h,id,bg,vars,win){
var flashStr=
"<object classid='clsid:d27cdb6e-ae6d-11cf-96b8-444553540000' codebase='http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0' width='"+w+"' height='"+h+"' id='"+id+"' name='"+id+"' align='middle'>"+
"<param name='allowScriptAccess' value='always' />"+
"<param name='allowFullScreen' value='true' />"+
"<param name='movie' value='"+url+"' />"+
"<param name='FlashVars' value='"+vars+"' />"+
"<param name='wmode' value='"+win+"' />"+
"<param name='menu' value='false' />"+
"<param name='scaleMode' value='noScale' />"+
"<param name='showMenu' value='false' />"+
"<param name='align' value='CT' />"+
"<param name='quality' value='high' />"+
"<param name='bgcolor' value='"+bg+"' />"+
"<embed src='"+url+"' FlashVars='"+vars+"' wmode='"+win+"' menu='false' quality='high' bgcolor='"+bg+"' width='"+w+"' height='"+h+"' name='"+id+"' id='"+id+"' align='middle' allowScriptAccess='always' type='application/x-shockwave-flash' pluginspage='http://www.macromedia.com/go/getflashplayer' />"+
"</object>";
document.write(flashStr);
</script>
</head>
<body style="width:100%;height:1000">
<script type="text/javascript">
flashWrite('TestPlayer.swf','100%','1000','swf','','css=assets/css/NasmoPlayerStyle.css&c onfigURL: config/config.xml&filepath :2010-05-12/sion1219_20100512210001.asf','transparent');
</script>
</body>
</html>

Multiple flash install/uninstall process spawning

Has anyone else had the problem of multiple Flash installer/uninstaller processes running that cannot be killed?
Image Name PID Session Name Session# Mem Usage Status
FlashUtil32_11_6_602_171_ActiveX.exe 3884 Console 1 8,012 K Running
Removing, reinstalling , updating flash didnt fix the issue.

I found my own fix.
Go to :-
C:\Windows\System32\Macromed\Flash
C:\Windows\SysWOW64\Macromed\Flash
Rename the file extension on " FlashUtil32_*Adobe Version*ActiveX " from .exe to .txt
I tired this on two different machines running different versions of Flash ,one on 12.*** and one on 11.***
It worked on both.

Use of Multiple partition in multiple flash regions

I have a Windows Embedded Compact 2013 device with NAND flash. I want to have multiple Flash file systems in different flash regions. How can I configure multiple files systems in different flash regions? How should the regions look like so that they can
be mounted automatically. It works fine for one file system, but I am not able to mount a second file system in a different region automatically.
Regards
Norbert

I have changed my configuration. now I have two instances of my NAND driver and try to mount them, but the second Partition always failed to format with error 87 (invalid Parameter). Here is my Registry configuration:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash]
        "DriverPath"="Drivers\\BuiltIn\\NAND"
        "Order"=dword:0
        "BootPhase"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash]
   "PartitionDriver"="flashpart.dll"
"MountAsBootable"=dword:1
"AutoPart"=dword:1
   "EnableCache"=dword:0
   "DriverPath"="Drivers\\BuiltIn\\NAND"
   "Name"="NAND"
   "AutoFormat"=dword:1
   "Flags"=dword:1000
   "LoadFlags"=dword:1
   "BootPhase"=dword:0          ; Make NAND available in BootPhase1, to load the persisted registry
   "DefaultFileSystem"="FATFS"
   "FormatTFAT"=dword:1
   "CheckForFormat"=dword:1     ; Ask the OAL if we should format on boot (i.e. cold reset)
"Dll"="exfat.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\PART00]
   "Folder"="Flash"
"AutoMount"=dword:1
"AutoFormat"=dword:1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NAND]
"Flags"=dword:1000
    "Profile"="MSFlash"
    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
    "Order"=dword:0
    "FriendlyName"="TI NAND FLASH Driver"
    "Dll"="flashmdd.dll"
    "FlashPddDll"="BSP_nand.dll"
    "Prefix"="DSK"
    "MemBase"=multi_sz:"50000000","08000000"
    "MemLen"=multi_sz:"00001000","00001000"
    "Prefetch"=dword:1
   "Index"=dword:1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NAND2]
    "Profile"="HDProfile"
    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
    "Order"=dword:1
    "FriendlyName"="TI NAND FLASH Driver2"
    "Dll"="flashmdd.dll"
    "FlashPddDll"="BSP_nand.dll"
    "Prefix"="DSK"
    "MemBase"=multi_sz:"50000000","08000000"
    "MemLen"=multi_sz:"00001000","00001000"
    "Prefetch"=dword:1
   "Index"=dword:2
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
"MountAsBootable"=dword:0
   "AutoPart"=dword:1
   "AutoFormat"=dword:1
    "EnableCache"=dword:0
    "DriverPath"="Drivers\\BuiltIn\\NAND2"
    "Name"="NAND2"
    "PartitionDriver"="flashpart.dll"
    "DefaultFileSystem"="FATFS"
   "FormatExfat"=dword:0
    "FormatTFAT"=dword:0
   "Dll"="exfat.dll"
   "CheckForFormat"=dword:1
   "FullFormat"=dword:1
   "SecureWipe"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\PART00]
   "Folder"="SysLog"
"AutoMount"=dword:1
"AutoFormat"=dword:1
Any Idea?

Dreamweaver and multiple flash files (xml)

I am trying to add multiple flash image galleries on my
website...most of these have xml files (usually named the same,
"images.xml"). My problem is that I tried to put each gallery in
its own folder to keep things organized; however, while the swf
seems to work when you click to test it, it is not working on the
webpage.
My original flash gallery that has the xml file and swf file
on the root of the site work fine. I guess if I had different named
xml files it may work but I cannot figure out how to change that
either. Please help!

Here's a site with four flash slideshows... check their code
and you will
see four separate xml files and images for each slideshow in
in their own
separate folder
"jl25" <[email protected]> wrote in message
news:gmnb2p$1cu$[email protected]..
>I am trying to add multiple flash image galleries on my
website...most of
>these
> have xml files (usually named the same, "images.xml").
My problem is that
> I
> tried to put each gallery in its own folder to keep
things organized;
> however,
> while the swf seems to work when you click to test it,
it is not working
> on the
> webpage.
>
> My original flash gallery that has the xml file and swf
file on the root
> of
> the site work fine. I guess if I had different named xml
files it may work
> but
> I cannot figure out how to change that either. Please
help!
>

How can I combine multiple flash banners

I have multiple flash banners for specific product pages and
would like to combine them to play in order for the main product
page. What is the easiest way to do this?

you could put them in a MC on the timeline and call to a
frame label of the banner that cooresponds with the current page.
Or you could go more dynamic, list the banners Linkage ids in an
array and use attachMovie, or use the MovieClipLoader class and
load them as external swfs.
easiest? if your new to scripting and if you don't mind the
extra space in the file, go timeline.

How to best pass multiple flash vars in adobe-generated HTML?

I need to pass multiple flash vars into my swf -- I see multiple places in the adobe-generated HTML in which to put the flash vars. While I can do this successfuly for one flash var, I can't for more than one (I'm using something like this at the moment, which works, but cannot be extended URL=http://promotions-ea.yoyodyne.com/VideoFun.swf?XML_URL=http://promotions-ea.yoyodyne.com-h otspot/xml/whatever.xml)
Someone suggested
flashVars = {}
flashVars.XML_URL = "abc.xml";
flashVars.AB_CD = "whatever"
But I don't see how to put that into the adobe HTML.
Any help much appreciated.

Someone suggested using a JS array because that is how SWFObject would use it - and that's what you should use to embed your flash.Google SWFObject. Much better, much simpler.

Play multiple flash animation

Hi, i would like to randomly play multiple swf files one
after one, like slideshow of swf files
here is what i want:
- load multiple external swf file from a main swf.
- a swf play and when is finish the next one play, i mean the
next one have to wait that the first one is finishing play before
playing.
- if its possible, preload the swf file, so the user do not
have to wait that all swf file have to load, i mean loading the
first swf file, play it and preload the next one during the first
one playing.
- do all this randomly
the code i attach serve to play one external files, i didnt
know how to play multiple one.
im not sure if the adobe interface attach code correctly, so
i pasted here:
import flash.display.*;
import flash.net.URLRequest;
var rect:Shape = new Shape();
rect.graphics.beginFill(0xFFFFFF);
rect.graphics.drawRect(0, 0, 500, 120);
rect.graphics.endFill();
addChild(rect);
var ldr:Loader = new Loader();
ldr.mask = rect;
var url:String = "
http://swffile.swf";
var urlReq:URLRequest = new URLRequest(url);
ldr.load(urlReq);
addChild(ldr);
thanks

You could add the swf's to the library, give them a class
name and then reference them from the library in flash.
If you use flex you can embed the swf's at compile time using
[Embed(source='assets/scenes/home.swf')]
public static var home:Class;
and create an instance of the class when you would like to
use it.
var instance = new home();

How to sync multiple flash players on multiple networked computers

I want to play, stop or start simultaneously the same flash
movie (presentation) installed on multiple computers connected to a
LAN. Do you have any idea how to do this?

It has to do with networking. Go to your computer
administrator and tell them what you want, they will link all the
computers to one and you can have full control. Alternativly just
put it up via a projector!

DVD from multiple flash files shows "loading" across 8/600 swf files

I got tossed into the middle of editing a training dvd that is composed of several swf files. I've made minor edits to content (spelling, grammer, etc), when I re-burn the dvd there are 8 files that display "loading" in blue upon opening (all files do this throughout the dvd) but with these particular files it never goes away. It remains on the screen and visible underneath or behind the text. Nearly 2 months ago, a round of edits was necessary and these same 8 files behaved normally. Three of the eight files were not edited in either round, were fine on the last burn, and are now displaying the "loading" constantly. Would anyone have any suggestions to fix this?

The DVD is throwing a bit of a twist into it. I'm assuming you mean data DVD first off and this is all executable projector based content?
The best thing you can do to start is play the content in the Flash IDE so the debugger has a chance to show you any errors. Load the project and then run the debugger (CTRL/CMD + SHIFT + ENTER) and let us know if you see any errors show up. Chances are you're hitting a snag and it's no longer running code properly.

Best way to work with multiple Flash objects?

I am making an application that is going to need to use several custom MovieClip-based classes from Flash. I'm not sure if I'm using the terminology right. What I have is a Flash file with movie clips, each clip has a class with properties and methods. Many of the methods control what happens in the clip.
For example, if there was a clip "Person" with walking and sitting animation, there are methods "sit" and "walk" which would play the appropriate parts. I need to add dynamically several "Person" clip/objects to the Flex app, and command them to walk or sit when needed.
What's the best workflow for this? How do I save the clips? Or is is best just to do the whole thing in Flash?

Have you looked into using the Flex Component Kit for Flash?
http://blog.flexexamples.com/2007/09/02/installing-the-flex-component-kit-for-fl ash-cs3/
http://opensource.adobe.com/wiki/display/flexsdk/Flex+Component+Kit+for+Flash
http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-fla sh-cs4/
If you want to use components for Flex 4 using Flash CS4+ you will probably want to use the latest MXP file here:
http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/frameworks/flash-integ ration/

Help with multiple flash movies in same website

I'm trying to create a website in dreamweaver. I created the
artwork in fireworks. a slice of it i exported to flash to create
rolling clouds over the background. i also want in the same swf
file a screen for my main content. ( I used a scrollPane component
that works nice. But for each button on my web menu (home,
schedule, ect...), I want to be able to put new content in my
scrollPane. My buttons don't reside in my flash movie. Do I need to
create a new movie for each web page?
I'm not sure how to procede.
Can anybody help?
brad

It seems that when you import an external flash movie into
Captivate 1, the full path is...
"_level0.slide0__image_mc.s0_i9_swf_mc.m_swf_mc"
...this was the start of the solution for my problem so I
thought it best to post in case it helps out anyone else.
BTW - The slide number changes (obviously) and so does the
'i' reference depending on the attributes you have given to your
imported movies.

Multiple Flash Videos on 1 Page

Hi All
If i were to put 4 flash videos into a page, by using the
'import flash video' function in DW CS3 - will they all load at the
same time, or only load when the user clicks play?
Many Thanks
JP

Im not sure I understand, however I have a page up with 2
flash movies, but
I timed them by extending the first frame on the one to not
start any motion
until the first one is coming to an end.
So they both in essence start at once, but the one on top
plays out, as it
is coming to an end, the one in the body begins to move...
http://www.unitexservices.com
Dont know if that helps you or not.
Gary
"thewakeplace.com" <[email protected]> wrote
in message
news:g45nrn$3ee$[email protected]..
>I have a bank of videos that i want to put onto the site.
>
> Originally, i was going to do an XML list through a
flash player. But i
> don't
> have the flash server, and i don't know enough of flash
to do it another
> way
> (and i can't find a tutorial).
>
> So i have 20+ videos that are Quicktime and im HD, that
i have converted
> into
> flash, as it adds a nice lat compression to make them
smaller. From there
> i
> want to fit around 4 to 5 videos on a page one after
each other (kind of
> like
> vimeo.com).
>
> So what i need to know is if i put 5 videos on a page,
when the user goes
> onto
> that page, will they all start to play and will the page
start to stream 5
> vids
> at once.
> OR - will they only stream WHEN the user clicks the play
button on each
> one?
>
> Does that make more sense?
>
>
>

Multiple Flash Changers

Similar Messages

Maybe you are looking for