Multiple flat files appended, is file locked until all processed?

Hi All,
Have a scenario in place where we are collecting multiple flat files on ECC and using append mode on the receiver file adapter to create a single file for final output. We are only interested in submitting the output to it's target after all files sent to PI have been appended.
Does PI 7.0 lock the appended file until all files have been appended so I am sure I end up with a complete single file on output? If not, what are my options to ensure a completely appended file is output? Would it be a viable option to pass the appending file through another sender file adapter using 'msecs to wait before modification check'?
Thanks!
Don
Edited by: donald.meredith on Dec 1, 2011 2:31 PM

How many files are you collecting from ECC and appending at receiver side and how much time it is taking to complete the process?
if its possible to schedule your business to read data from FTP after completing append then no worries, else sometimes it creates trouble.
The option you mentioned is reliable one , but you ended up creating one more interface.
Regards,
Raj

Similar Messages

Reading in a txt file, appending numbers to it.

So I'm a student at Georgia Tech working on a relatively simple Java program for a research internship, but it's been awhile since I've had my Java course and I'd really like some help on this. Basically, what I'm looking to do is to take in a text file with data that only consists of the numbers 1,2,4 and 5, with up to four digits in each line and no number may be repeat itself in the same line. A sample of data would look like the following:
12
21
154
2
1
45
24
4125
Lines like '12' and '21' would count as the same however, as would '4512' to '1245'. I'm trying to determine how often each number 'interacts' with each other number, and then append that data to the end of the text file by saying something along the lines of:
One-Two Interactions = 4
Four-Five Interactions = 6
Etc. etc. The real problem I'm having is I can't remember how to get the BufferedReader to 'identify' the particular numbers and combinations of numbers before adding to the count in each variable. If you have any advice or answers, it would be greatly appreciated.

import java.io.*;
import java.util.*;
public class ExchangeProgram{
     public static void main(String[] args) {
          int one = 0;
          int two = 0;
          int four = 0;
          int five = 0;
          int one_two = 0;
          int four_five = 0;
          int one_four = 0;
          int two_five = 0;
          int four_two = 0;
          int one_five = 0;
          int one_two_four = 0;
          int two_four_five = 0;
          int one_two_five = 0;
          int one_four_five = 0;
          int all = 0;
          Set h = new HashSet();
          File file = new File("test.txt");
StringBuffer contents = new StringBuffer();
BufferedReader reader = null;
try
reader = new BufferedReader(new FileReader(file));
String text = null;
// repeat until all lines is read
while ((text = reader.readLine()) != null)
                         h.add(text);
} catch (FileNotFoundException e)
e.printStackTrace();
} catch (IOException e)
e.printStackTrace();
} finally
try
if (reader != null)
reader.close();
} catch (IOException e)
e.printStackTrace();
          for (int i=0; i>h.size(); i++){
                    if (h.contains("1")){
                         one++;
                    if (h.contains("2")){
                         two++;
                    if (h.contains("4")){
                         four++;
                    if (h.contains("5")){
                         five++;
                    if (h.contains("12")){
                         one_two++;
                    if (h.contains("45")){
                         four_five++;
                    if (h.contains("14")){
                         one_four++;
                    if (h.contains("25")){
                         two_five++;
                    if (h.contains("42")){
                         four_two++;
                    if (h.contains("15")){
                         one_five++;
                    if (h.contains("124")){
                         one_two_four++;
                    if (h.contains("245")){
                         two_four_five++;
                    if (h.contains("125")){
                         one_two_five++;
                    if (h.contains("145")){
                         one_four_five++;
                    if (h.contains("1245")){
                         all++;
// show file contents here
System.out.println(one_two);
Here's what I've come up with so far, though I'm getting this error: Note: Recompile with -Xlint:unchecked for details.
Any comments on any major mistakes I'm making here? Haven't used the Set interface much before.

OSB File append

I have setup a File protocol based Business Service in OSB. This Business Service is called by a Proxy Service after setting the file name in the outbound transport header and assigning the text to be written to the file. When executed, the file is successfully created. When the proxy service is executed again, a new file is created. I would like the data to be appended to the existing file. How do we achieve this?
I know there is a property - 'Append' which should be set to true in case of file adapters. I tried setting the outbound transport header to 'Append', 'append', 'jca.file.append', 'jca.file.Append'. None of these seem to help.

Thanks for the link. That really helped!
However, though the file is created by the file adapter, the contents are missing. While configuring the File Adapter in JDev, I defined the following XSD as the message for the write operation.
<xsd:element name="log">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="logMessage" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
And I am sending the following in the SOAP Request...
<log:log xmlns:log="http://myNS/LogFileWriter">
<log:logMessage>My Log message...</log:logMessage>
</log:log>
I expect the value 'My Log message...' to be written to the file. However, it is always empty.

Migmon: Lock file ExportMonitor.lck is locked during export

Hello,
I am trying to export my DB since I will move it to another system. I have done that before (2008) but not with Migration Monitor since I could not get it to work. At that time I could choose R3load-based method and everything went fine.
This time I don't have that option so I must try to fix my problem.
I have HP-UX 11.23 running on IA64.
If I try to run ./export_monitor.sh (or ./sapinst and skip the table splitting function) I get this result:
+ /opt/java1.4/bin/java -showversion -Xmx1024m -cp
./.:./migmon.jar:./activation.jar:./mail.jar com.sap.inst.lib.app.
SecureStartup -Xmx1024m com.sap.inst.migmon.exp.
ExportMonitor -dbType ORA
java version "1.4.2.17"
Java(TM) 2 Runtime Environment, Standard Edition
(build 1.4.2.17-071106-02:40)
Java HotSpot(TM) Server VM
(build 1.4.2 1.4.2.17-071106-08:12-IA64N IA64, mixed mode)
Another instance of application is already running.
Lock file 'ExportMonitor.lck' is locked by other process.
If I use the sapinst and set it to split the files I get "Lock file 'PackageSplitter.lck' is locked by other process.".
But the file is NOT used by another process!
I use root and yes the users SIDadm and oraSID are in the group sapinst and yes I have set the permissions to 777 and yes the umask is 022 and yes I have downloaded the latest migmon and decompressed it to these locations (I picked all three just in case):
tmp/sapinst_exe.13660.1280391575/JAR
tmp/sapinst_exe.13660.1280391575
/InstMst_701/IM_HPUX_IA64.
If you smart people know how to fix this I would be very happy and also impressed. I have no idea what to do and my message to SAP is still not answered...
Best regards Linus Hellsing
Edited by: Linus Hellsing on Jul 29, 2010 11:04 AM

Hi Peter, thank you for answering.
No, I have not done a fuser on the file. But I have tried to edit it and that works just fine.
I also have restarted the server, just in case.
But now when I am writing this something nice has happened.
On the server I am testing I have HP-UX 11.23 but my production servers have 11.31 so I tried to start the export on that server (scary). It seems to work!! Sadly I must export all of my systems but this makes me believe theat it is the OS that is old or don't have enough patches.
swlist on my old server tells me that I am missing a couple of patches compared to SAP Note 837670. I think I have to call the HP-UX department at my office... Um wait, that would be me since it is vacation season....

Loading Multiple Flat File around 80+

Hi,
Loading multiple flat file in to BI system.
My issue: I got a scenerio of loading multiple i.e., 80+ flat file into BI system every month and my client want it to be done through process chain r automation with out manual intervention.
Can any one suggest me how can i achiev this one.
Regards,
Prabhakar.

Hi All,
We have developed a logic to upload multiple flat file at a time i.e., .CSV file. Please find below is the logic regarding that routine.
*+ program filename_routine.
Global code
$$ begin of global - insert your declaration only below this line -
Enter here global variables and type declarations
as well as additional form routines, which you may call from the
main routine COMPUTE_FLAT_FILE_FILENAME below
data : v_filename type string.
data : v_foldername type string.
data : v_uploadfile type string.
data: v_download_file type string.
data : v_ext(4) type c.
data : v_FILE_EXISTS type c.
data : v_file type DXFILE-FILENAME.
data : v_count(3) type c.
data : v_length type i.
TYPES: BEGIN OF TY_file,
        LINE(900),
      END OF TY_file.
DATA: GIT_file TYPE TABLE OF TY_file.
$$ end of global - insert your declaration only before this line   -
form compute_flat_file_filename
using    p_infopackage type rslogdpid
           p_datasource   type rsoltpsourcer
           p_logsys       type rsslogsys
changing p_filename     type RSFILENM
           p_subrc        like sy-subrc.
$$ begin of routine - insert your code only below this line        -
This routine will be called by the adapter,
when the infopackage is executed.
v_count = 1.
*---- As per the folder location of the files & system we have to change
*the path fo the folder in the below variable i.e., 'c:\............
v_foldername =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\'.
*---- As per the Prefix of the files like 'CSI_01_..' we have change the
*prefix if required in the below variable i.e., 'CSI_01_..', IF REQUIRED
*OR IF WANT TO CHANGE THE PREFIX TO SOME OTHER.
v_filename = 'CSI_01_'.
v_ext = '.csv'.
condense v_count.
concatenate   v_foldername
                v_filename
                v_count
                v_ext       into v_uploadfile.
v_file = v_uploadfile.
CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
    EXPORTING
      FILENAME       = v_file
      PC             = 'X'
    IMPORTING
      FILE_EXISTS    = v_FILE_EXISTS
    EXCEPTIONS
      RFC_ERROR      = 1
      FRONTEND_ERROR = 2
      NO_AUTHORITY   = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
while v_FILE_EXISTS = 'X'.
    v_file = v_uploadfile.
    CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
      EXPORTING
        FILENAME       = v_file
        PC             = 'X'
      IMPORTING
        FILE_EXISTS    = v_FILE_EXISTS
      EXCEPTIONS
        RFC_ERROR      = 1
        FRONTEND_ERROR = 2
        NO_AUTHORITY   = 3
        OTHERS         = 4.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    if v_file_exists = 'X'.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = v_uploadfile
          FILETYPE                = 'ASC'
          HAS_FIELD_SEPARATOR     = 'X'
        TABLES
          DATA_TAB                = GIT_file
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      elseif sy-subrc = 0.
**----- As per the REQUIRMENT, want to change the down loading file
*path means we have to change the path in the below variable i.e.,
*'c:\.......
v_download_file =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\satheesh.CSV'.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            FILENAME                = v_download_file
            FILETYPE                = 'ASC'
            APPEND                  = 'X'
          TABLES
            DATA_TAB                = git_file
          EXCEPTIONS
            FILE_WRITE_ERROR        = 1
            NO_BATCH                = 2
            GUI_REFUSE_FILETRANSFER = 3
            INVALID_TYPE            = 4
            NO_AUTHORITY            = 5
            UNKNOWN_ERROR           = 6
            HEADER_NOT_ALLOWED      = 7
            SEPARATOR_NOT_ALLOWED   = 8
            FILESIZE_NOT_ALLOWED    = 9
            HEADER_TOO_LONG         = 10
            DP_ERROR_CREATE         = 11
            DP_ERROR_SEND           = 12
            DP_ERROR_WRITE          = 13
            UNKNOWN_DP_ERROR        = 14
            ACCESS_DENIED           = 15
            DP_OUT_OF_MEMORY        = 16
            DISK_FULL               = 17
            DP_TIMEOUT              = 18
            FILE_NOT_FOUND          = 19
            DATAPROVIDER_EXCEPTION = 20
            CONTROL_FLUSH_ERROR     = 21
            OTHERS                  = 22.
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        refresh git_file.
      ENDIF.
    endif.
    if v_file_exists = 'X'.
      if p_subrc = 0.
        v_count = v_count + 1.
        condense v_count.
        concatenate
             v_foldername
             v_filename
             v_count
             v_ext into v_uploadfile.
      endif.
    else.
    endif.
endwhile.
v_uploadfile = v_download_file.
p_filename = v_uploadfile.
p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform. +*
Reagrds,
Prabhakar.

How do I select multiple files under "Get File Info"and lock or unlock all?

How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Loading Multiple Flat File in to BI System with one InfoPackage

Greetings,
i have developed a routine to Load Multiple Flate File in one InfoPackage, but it doesn't work. Only the Last File are loaded. Who can Help me?
Loading 'R:\Verzeichnis \ing_wan_b_002.fall.csv' to 'R:\Verzeichnis \ing_wan_b_240*.fall.csv'
Routine:
DATA: VerzUndDateiname TYPE string value 'R:\Verzeichnis \ing_wan_b_000.fall.csv',
      VerzUndDateinameKomplett TYPE string,
      count TYPE i value 2,
      countN(3) TYPE n.
WHILE count <= 240.
countN = count.
VerzUndDateinameKomplett = VerzUndDateiname.
REPLACE '000' WITH zaehlerN
              INTO VerzUndDateinameKomplett.
p_filename = VerzUndDateinameKomplett.
count = count + 1.
ENDWHILE.
Best Regards
Jens
Edited by: JB6493 on May 18, 2009 1:03 PM
Edited by: JB6493 on May 18, 2009 1:07 PM

Hello Jens,
you have to process the InfoPackage 239 times. Your routine would be executed once during one processing of the InfoPackage. This would run the WHILE statement and end up with the last filename after 239 iterations.
Either try to concatenate the files you want to load (if possible) and load them in one go. Alternatively you could try to use a process chain to run the InfoPackage 239 times.
Kind regards,
Christoph

Multiple flat file in and multiple target tables

Hi,
How can we have multiple flat file into multiple targets.
I am trying to load data from multiple flat files into respective tables. But it gives error like
VLD-2411: Cannot handle two file structures
Make sure that only one file structure is used in a SQL*Loader map
Can anyone help.
Regards
Rakesh Kumar

I donot thing in one mapping you can take multiple sqlloader file.
If want to load data form multiple file use External table.

InfoPackage to load multiple flat file for different plant

Hi
There is a requirements to load the data from multiple flat files by different plant into BI which source data is coming from other system. Each flat file has it own naming convention.
As data has to load via infopackage into the targeted cube. Then I have to create multiple infopackage in order to load the data according to the number of flat files that provided. However, new plant will be created due to expansion of bussiness. If that is the case, additional infopackage is required to create as and when there is a new plant.
Is there a way to create a infopackage to load the data from flat file by plant? Your advice is much appreciated.
Thanks and regards
Kang Ring

Hi,
The best way I can suggest is....
1. Create a folder in AL11 for your requirements.
2. In InfoPackage under Extraxction Tab you can have File Name , just side of this you can fine ABAP Routines ICon there you click on that and asks Name give some and then it will takes to your into ABAP Code there you can access the AL11 and then write code in such way that to take file irrespective of the File name, whatever the file is there in that Folder it ahoud take from that AL11 Folder path.
3. Load the Data using PC.
4.At the end of the PC Delete the File in AL11 folder , becasue we don't need it for next load.
Else
See the thread
Re: Automation of load from application server
Thanks
Reddy
Edited by: Surendra Reddy on Jun 4, 2010 11:03 AM

SSIS project - read multiple flat files with different formats

hi all,
i need to import multiple flat files with different formats into different tables of the sql server database and not able to figure out the best way out in ssis to do so...
please advise the possible methods in ssis to do so and if possible the process which can be dynamic as file names or columns might change in future.

Hi AK1987,
To import flat files with dynamic columns, we can use Script Task inside a Foreach Loop Container to parse the first row of the flat file to get the columns names and save them into a .NET variable, then, we can create “Create Table” script based on this
variable, and then store the script into a SSIS package variable. After that, we create a staging table based on the package variable, load the flat file data to the staging table. Eventually, we load data from the staging table to the destination table. For
the detail steps, please walk through the following blog:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

Loading from multiple flat files to same table using SQL Loader

Hi Gurus,
Can anyone please brief me the pros and cons of kicking of multiple sql loader sessions that reads multiple flat files but inserting it into just one table.
The table is not partitioned. Avg record counts for each flat file is about 5-6 million.
Oracle 11g,
OS: Linux
Regards
Cherrish Vaidiyan

Vaidiyan wrote:
Hi Gurus,
Can anyone please brief me the pros and cons of kicking of multiple sql loader sessions that reads multiple flat files but inserting it into just one table.Cherrish,
Pros -> Faster loading of more data
Cons -> Potential performance degradation
Test to see how much resource consuming this task would be and do a priority comparison of that multi-multi load task with other stuff that will be happening in the database in the multi-multi load time so you could decide how to share resources in that time.

Directory in application server has multiple flat files

Hi
How should we know that the Directory in application server has multiple flat files.
my requirement is, daily my program runs in batch at night. So, i have to know are there more than 1 flat file existing in the directory.
regards
mac

Try this FM,
CALL FUNCTION 'SUBST_GET_FILE_LIST'
    EXPORTING
      dirname      = ws_filepath
      filenm       = ws_fname
    TABLES
      file_list    = i_rsfillst
    EXCEPTIONS
      access_error = 1
      OTHERS       = 2.
Pass the path and
say ur file name starts with ALPXXXXX
then pass
ws_fname = 'ALP*' .
In the table i_rsfillst you will get all the file in directory.
Try this through a sample prorgam ,dont try through SE37, it will show ACCESS_ERROR.
Regards,
Message was edited by: sreejesh purapadiath
Message was edited by: sreejesh purapadiath

How Do I Get Rid Of Multiple Duplicates AND Relocate Numerous Files?

Basically I'm fed up of iTunes.
A couple of months ago, i had a problem with my itunes library due to a message regarding the iCloud. This practically deleted my whole iTunes library and forced me to relocate every single track, which took a lot longer than it needed to.
I was already annoyed with iTunes by this point, until yesterday around 1/3 of my tracks were still unlocated, however I could cope with this because I had the majority of my songs, despite this not being ideal.
Yesterday I was informed I needed to update my iPod, naturally I did. Then...this is when I start to get mad, my iPod crashed, then restored itself COMPLETELY back to factory settings, removing my songs and all my apps. I reopen my iTunes library to see that, that has also restored and NONE of my music is there.
Now, after a bit of fiddling, I have an iTunes library full of songs which have been duplicated twice or even three times, to add to it, hardly any are actually located. It's not just as simple as redownloading from iTunes, because I expect half my library is music from CDs. So now not only am I faced with trying to get rid of all the duplicates, I also have to locate all the songs (I have checked the preferences and redirected it to My Music > iTunes - basically what it should be) and I have to get rid of all the songs that I didn't want in the first place such as old songs that should be long gone off my iPod/Library from now.
If anyone could help, that would be great, because I'm so tired this time-consuming mess my iTunes has become.
Thanks in advance!

Broken Links
It depends a bit on why things aren't where iTunes expects to find them but if they are in sensible Artist & Album folders in some common location then my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations within a media folder. For more details see this thread.
Duplicates
Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
I intend at some point to improve DeDuper so that when there are multiple duplicates, where at least one is connected to a file while others are missing, it can throw away the entries to any missing files, however the current version needs all duplicates to have been repaired first.
tt2

File conversion and append file in receiver file adapter

Hi
I have a batch IDoc -> XI(3.0) -> file scenario with file conversion to create a flat CSV-like file. The problem is that because of the amount of data sent from R/3 (~20000 employees), the idoc is split into several idocs. In my receiver file adapter I want to append all the idocs contained in this data transfer to one flat file, before transmitting to FTP server.
For the next batch transfer (the next day) XI should start all over and create a new file and append all idocs contained in that transfer before transmitting the flat file to FTP server.
Can this be done using the 'Use Temporary File' and 'Append' options in the FTP connection Parameters in the comm-channel?
It is not an option to append the file in the FTP-server, because the files in the destination folder are moved immediately after arrival, so the file will be moved before file adapter can append all the files.
Does anyone have any suggestions to how to solve this?
Br
Kenneth

Hi Kenneth
Did you ever get a solution to this problem?
Regards
Russel Irvine
[email protected]

Custom File Info Panel: Bridge Locks Up (trials, tribulations, woes)

o/ all!
So I've spent the better part of this morning trying (for what I think is the fifth time this year) to get a custom file info panel installed properly. I've managed to successfully install a generic panel with most of the properties that I'd like in the panel proper, however, I'm having no end of trouble publishing and installing the panels and having them display properly in Bridge CC (64-bit).
I've followed the instructions provided in the Programmer's Guide to the letter (yes, including the trust files), and I'm still having issues.
-- System Information --
OS: Windows 7 64-bit
Flash Builder 4.7 (64-bit)
Adobe Bridge CC (64-bit)
Right now, all I'm trying to do is:
Create the flash builder project for an XMP File Info Panel
Publish the file info panel
Confirm the file info panel was installed correctly in Adobe Bridge CC.
The process:
1. I create the new project in Flash Builder (I've attempted using the 4.6.0 and 3.6A flex SDKs).
Now, at this point, I'm simply attempting to confirm that everything is hunky-dory with the installation process before I start converting my generic panel into a flash/flex panel; so I'm not modifying any of the files that the wizard created.
2. Right-click the root project folder in the leftmost pane in Flash Builder, select XMP>Publish.
3. Locate the published panel's output directory that Flash Builder published to
4. Copy/paste the published panel's root directory to the following directories:
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\
I put the panel definition in all of these folders as per various 'fixes' to what I think my issue is that I've discovered while google-troubleshooting.
5. Create a trust file in FlashPlayerTrust folder with the name testPanel36A.cfg (contents listed below):
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\testPanel36a.swf
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\testPanel36a.swf
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\testPanel36a.swf
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\testPanel36a.swf
As far as I know, I can put multiple paths in these .cfg files, but I'm not-at-all confident that this is, in fact, the case.
After all this, I fire up bridge, right click an image file, and select FileInfo. The dialog displays fine, and the panel tab appears on the right. Clicking on the panel reveals nothing but a gray area with no content, and Bridge locks up entirely. I can't cancel out of the dialog, and end up having to end the process from Task Manager.
My gut tells me that I'm doing something wrong with the trust files, as this seems like the issue that most closely resembles what I'm encountering. Secondarily, It may be the flex SDKs -- I only have the 4.6.0 and the 3.6A SDKs, and the link in the Flash Builder dialog takes me to the sourceforge page for Adobe, and from there, I cannot locate any additional older SDKs to try this with (I've seen posts around saying that people got their panels to work with 3.0, or 3.5).
Anyone have ANY insight on this? Seriously at my wits end -- I've tried everything but nothing seems to work . Many thanks,
.e

Hi The_Mumm,
     You need to correct content fo the .cfg file (hope your .cfg file is at correct directory i.e. C:\Documents and Settings\<user name>\AppData\Roaming\Macromedia\Flash Player\#Security\FlashPlayerTrust). Yes, I agree that you have followed the documentation and put the path upto .swf file.
    Could you please modify the content of the trust file, with the below content (you path have been modified)
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\
Hope everything will work now. If it doesn't work, please put only one path in trust file e.g. "C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels" and put the publish panel in this folder.
One more precaution, don't copy, if required move the custom panel from one place to other.
Please let me know if you still faces any issue. Enjoy you new year.
For your reference, I am following the following steps and everything is working fine
1. Open the Fb7,
2. file->new->project
3. in the new project wizards, select "xmp->custom panel wizard"
4. xmp->publish custom panel
5. Open the .cfg file and added the path (C:\Users\<user name>\appdata\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels) where my panel has got published.
6. Ran Bridge CC, panel is there and working fine.
One more variations I did is, moved custom panel from C:\Users\<user name>\appdata\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels to C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)\Custom File Info Panels\4.0\panels (the location of the custom file info panel inside bridge).
      For you doubts I tried with flex SDK 3.3A and 3.6a both worked fine. As in forum you have written that you don't have any other sdk. If you like please go on the following links for older SDKs "http://sourceforge.net/adobe/flexsdk/wiki/Download%20Flex%203/"
-Sunil

Multiple flat files appended, is file locked until all processed?

Similar Messages

Maybe you are looking for