Multiple Float Paths

I have a problem related to the multiple float
paths.
After marking the float path
in the tools, schedule, advanced, multiple paths = 10,
etc., the fields "Float Path" and "Float Path Order"
remain empty.
Can anybody give me a
hint on what might have gone wrong.
<br
/>Ikaros

Try Grouping by Float Path or Float Path Order.<br
/>
Cheers

Similar Messages

Introducing FOREIGN KEY constraint may cause cycles or multiple cascade paths

I am trying to introduce a constraint on the sales_details table
ALTER TABLE [dbo].[SALES_DETAILS] WITH CHECK ADD constraint fk_sd_vat FOREIGN KEY([VAT])
REFERENCES [dbo].[VAT Rate] ([VAT]) on update cascade on delete cascade
GO
I am getting the error saying
Msg 1785, Level 16, State 0, Line 1
Introducing FOREIGN KEY constraint 'fk_sd_vat' on table 'SALES_DETAILS' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
What could be the reason,Please suggest me the solution for this,
Thanks,

Hi Erland,
This is my DDl
CREATE TABLE [dbo].sales_details(
[BNUM] [varchar](20) NOT NULL,
[CNAME] [varchar](30) NOT NULL,
[CNUM] [int] NOT NULL FOREIGN KEY([CNUM])REFERENCES [dbo].[Customer] ([CNum]),
[ITNAME] [varchar](100) NOT NULL,
[ITEM#] [int] NOT NULL ,
[QTY] [int] NOT NULL,
[UNIT] [varchar](5) NOT NULL,
[PRICE] [float] NOT NULL,
[BASIC] [float] NOT NULL,
[DISCOUNT] [float] NOT NULL,
[FRQTY] [int] NOT NULL,
[BADDR] [varchar](300) NULL,
[CADDR] [varchar](300) NOT NULL,
[BDATE] [datetime] NOT NULL,
[VAT] [float] NOT NULL
ALTER TABLE [dbo].[SALES_DETAILS] WITH CHECK ADD constraint cons1 FOREIGN KEY([ITNAME])
REFERENCES [dbo].[New Item] ([Item Description]) on cascade update
GO
ALTER TABLE [dbo].[SALES_DETAILS] WITH CHECK ADD constraint FOREIGN KEY([VAT])
REFERENCES [dbo].[VAT Rate] ([VAT]) on cascade update
GO
I am getting the error when i execute second Alter statement.
Thanks,
Check if VAT Rate table has any FK with cascaded options?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Changing multiple texture paths in Adobe Flash CS5

Hey everyone,
I'm desperately searching for a way to swap out multiple texture paths of images in my library.
For instance, say I put a set of 5 textures in Adobe/Bitmaps. Later I decide to move the 5 textures to Adobe/Textures and delete the old directory. What I typically have to do is go into each texture file's properties and re-import the image with the new path in place.
This is fine if I were only dealing with a handful of textures, but as it is, I have nearly 75 or so textures to re-path! If anyone knows of an out-of-the-box way around this or knows of any Flash extensions that could get around this issue and wouldn't mind sharing it here, I'd greatly appreciate it! I've searched around on google and have, so far, come up completely empty.
Thanks in advance.

Well I did use actionscript for creating the actual index and effects, but AS3 was used no further for the index. I created an index which had links Part 1, Part 2 ,3,4,5 and clicking on each of them lead to different frames (using the mouseclick, goto and stop at frame (x) function.) Clicking on part one for example would lead to list of documents in that part. Sorry I can't be of any help, I'm totally new to this

Float path

what is float path and why we r using that

welcome Bihmerson to the  iMovie boards ...
Bihmerson wrote:
I want to be able to insert an image, and set its path and speed so I can make it float on screen to my disgresion.
not possible within iMovie (any version... )
only option:
FinalCutExpress, 199$ .. it allows anything you want..

Multiple Context Paths Per Web Application

Hi,
We have a Web Application which has a Context Path of "titanadmin". We have some
HTML pages which refer to this within the URLs they contain. We need to move the
functionality in this Web Application to another Web Application with a Context
Path of "gp3admin". We cannot change the URLs in the generated HTML.
So, is it possible for a Web Application to have multiple Context Paths, so that
URLs starting with "/titanadmin/" and "/gp3admin/" both go to the same Web Application.
Thanks,
Dave

There is no hard limit to the number of Web Applications (I managed a WSSv3 farm that had 60+, for example). The issue is memory-related and primarily stems from 32bit systems where it was much easier to get Out Of Memory errors on the IIS Application Pools
when performing a large operation across a 32bit Application Pool (e.g. crawling). However, if you limit each IIS Application Pool to about 10 Web Applications (again, in 32bit land that no longer applies), everything generally works OK given the Web Applications
do not have a very large amount of content.
But, if HNSC is in use, a single Web Application should be sufficient, barring any Web Application-specific settings you might need to make.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Multiple alias paths for icons

Is it possible to define multiple alias paths for icons?
In the httpd.conf I have an alias for example:
Alias /d6i_icons/ "/devapps/test/aces/graphics"
In the Registry.dat I have set the iconpath and iconextension as follows:
default.icons.iconpath=/d6i_icons/
default.icons.iconextension=gif
I want to add an additional path for icons for another system "/devapps/test/iceman/graphics/"
Is it possible to have 2 paths for the Alias /d6i_icons/ and how do you code this? I have tried defining another alias and adding the other path on the one alias line, but neither worked.
Thanks!!
Shellie

Hi,
you can only specify one. However, if you store icons in jar files and set documentbase=codebase in the formsweb.cfg file then you can use separate jar files per application
Frank

How to store (non-persistent) multiple float[] arrays.

Hi;
In a situation where an object needs to store multiple float arrays, how can I use a 2 dimensional array to store them? I can't use a collection since an array is a primitive.
I would use a 2 dimensional array, but my keys to get/set these arrays are ints. So I cant do a "int i[][]", nor a "float f[][]".
Any ideas?
Thanks;
-nat

You could make a Map (such as HashMap) with an
Integer (java.lang.Integer) key and a "int []" or "float []" as a value (an array is an Object, so can be put as a value).You kid me not! I need to review my basics.
I simply didn't know that an array of primitives can be stored as a value in a map.
Thank you!
-nat

Error: There are multiple join paths between these folders

I occasionally see this multiple join path error message when collapsing a field in a cross-tab report. The strange thing is that this error only occurs when collapsing on detail of the field, but does not happen when collapsing on the field title. For example, if the column is the department field, there is no error when collapsing on the department title at the top of the column. However, when collapsing on a single department (e.g. president_office) then the error occurs. The second odd thing, when reviewing the SQL there is only one join to the department table.
Does anyone have an explanation, solution, or a suggestion on how to debug this error? Sometimes I found that by rearranging the layout of the fields fixes the problem, but this is not an option in every report.
thanks

Since it's using the "Firstname lastname" to reference the user when I use add-distributiongroupmember, I suspect that referencing the smtp address would return different results.
Does Add-DistributionGroupMember reference AD objects, even if they don't have an associated mailbox? I ran into the same error when giving myself full permissions on a mailbox; I have only one Exchange object (a mailbox) but I have a second
AD object (user object with dom admin rights). I then went and found that the user I had trouble adding to the DG has an
AD object with no associated mailbox. (We frequently create AD users for business partners to access published remote applications.)
My suspicion is that Add-DistributionGroupMember references AD objects, and not just valid Exchange recipients. This would make sense if you're using security enabled groups and having them pull double duty - which we don't do at this company.
If my suspicion is correct, it should be documented on the technet article. http://technet.microsoft.com/en-us/library/aa995970(v=exchg.141).aspx

Accounting for Multiple Cygwin Paths for Windows Hosts

Hello everyone,
We are using EM12cR2 (installed on RHEL) but need to monitor a number of Windows hosts. For most Windows hosts, Cygwin is installed in the default path (C:\cygwin) but we also have Citrix XenApp servers that we would like to monitor but they do not have a C: drive, just M:. I've seen the settings file that allows someone to change the Cygwin path but I can't find information on whether or not you can add multiple paths to that line and what that syntax would be. I've also seen an older Citrix plug-in but I don't see anything stating it's compatibility with this version of EM. If I could, I would test out a number of scenarios in a lab environment but we don't have that option.
Does anyone know if it's possible to add multiple Cygwin paths (and what the syntax is), if the Citrix plug-in is compatible with EM12cR2, or if there's another way to do this that I'm not thinking of?
Thank you,
EMS

Hi ,
you have to update the following properties in $OMS_HOME/oui/prov/ssPaths_msplats.properties to reflect the new cygwin installation location.
eg.
From
SSH_PATH=C:/cygwin/bin/ssh.exe
SCP_PATH=C:/cygwin/bin/scp.exe
MKDIR_PATH=C:/cygwin/bin/mkdir.exe
SH_PATH=C:/cygwin/bin/sh.exe
CHMOD_PATH=C:/cygwin/bin/chmod.exe
TRUE=C:/cygwin/bin/true.exe
To
SSH_PATH=M:/cygwin/bin/ssh.exe
SCP_PATH=M:/cygwin/bin/scp.exe
MKDIR_PATH=M:/cygwin/bin/mkdir.exe
SH_PATH=M:/cygwin/bin/sh.exe
CHMOD_PATH=M:/cygwin/bin/chmod.exe
TRUE=M:/cygwin/bin/true.exe
thanks,
Prakash

How to deal with multiple disk path's

hi
i'm setting up a new server with virtual servers with extra io domain's
now i have a question on how to deal with multiple disk path's
so following questions:
- can i enable multipath on the primary and on the alternate domain?
i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
- if i can't enable multipathing how to handle this
for example a disk has on the primary domain 4 path's to a disk
do i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
if i do the first is adding all the path to the same mpgroup enough or not

Hello
1.-can i enable multipath on the primary and on the alternate domain? Yes. i understand for multipath mpxio or similar.
2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths. That's is what you have to use in a vds.
Please check this doc to see the best practice to ldom
white-paper-ldom
regards
eze

Multiple (floating) front panel application in labview

I am trying to build a multi-window application. My goal is to be able to have multiple floating windows open simultaneously, which all allow user input.
My problem is, when I open a new floating window, I can no longer click buttons in the other windows.
I've attached a simple example of what I'm trying to do. The Main.vi has two parallel loops and two event structures. One loop has the sole purpose of running the Sub.vi after a button is clicked. The other loop performs some functions when the other buttons are clicked. Since these loops run in parallel, I would think that I can interact with both VI's when the front panels are open.
What am I missing here?
Any help is appreciated. Thanks.

Your bottom loop stops because you have a regular call to the subVI.
The event loop cannot finish until the subVI finishes.
To strictly answer your question, Take a look at the options for the EVENT structure. By default the LOCK OUT KEYBOARD UNTIL THIS EVENT IS FINISHED is set ON.
That means just what it says. When you call that subVI, the event locks out the keyboard/mouse on the calling (MAIN) VI.
Having TWO event structures in one VI is asking for trouble.
I have an app with 10-12 windows, all of which are overlappable, and usable.
the way you do it is to run all 10 VIs at startup, but keep them closed.
Send each one an EVENT from the main VI when you want it to open. All they do in response to that event is FP.OPEN.

Setting Multiple Report Paths for a Reports Server

I am sorry for posting here, As I didnot get response from reports forum, I posted here.
I would like my reports server named ABREP to to read reports from multiple paths.
We have fmb,fmx,rdf,rep files in /gccapp/TESTAPP & /gccapp/LIVEAPP.
I tried to follow I need multi report path
but no luck.
I give oratest:7778/forms/frmservlet?config=app1&*EnvId=testenv*
but still it is reading from other location.
can any one please help.
My env: 10gdbR2, 10gAS,Solaris
thanks
Edited by: userR12 on Jan 16, 2010 6:16 AM

Thanks for reply. I restarted reports server also. Is my way of writing EnvId in the link is correct?
I have done the following:
1. Inserted the following into the report server configuration file:
<environment id="default">
<envVariable name="REPORTS_PATH"
value="/oraas/modlive10g:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/printers:${REPORTS_PATH}:$ORACLE_HOME/reports/winfont"/>
</environment>
<environment id="testenv">
<envVariable name="REPORTS_PATH"
value="/modapp/modtest10g:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/printers:${REPORTS_PATH}:$ORACLE_HOME/reports/winfont"/>
</environment>
2. commented REPORTS_PATH in reports.sh
3.
defaultEnvId="default" added to rwEng line in report server configuration file
4. Restarted Report Server
5. in browser appeneded EnvId=testenv to the application URL.
thanks
Edited by: userR12 on Jan 16, 2010 10:26 PM

Task with multiple outgoing path

Hi,
I'm creating a process in Oracle JDeveloper.
In the process, there is an activity with two outgoing path.
Most of the examples I've seen uses parallel gateway which comes in pair.
But the problem is that, the two outgoing path will not merge and end at the same end event.
E.g.
Task A -> 1) Task B -> End Event 1
-> 2) Task C -> End Event 2
Is there possible way this can be done?
Thank you!

Hi Srini,
have a look for example here [http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_hwfmodel.htm#BABCFHEI].
You should be able to set multiple users/groups/application roles. The default delimiter is a comma (,).
Regards,
Martin.

SOURCE ATTACHMENT for multiple source paths

I have a flex app project with the name AppProj.
I also have a flex library with the name LibProj. It has no SRC folder of its own. It has 3 external folders as source paths ...
C:\folder\codeFolder1\
C:\folder\codeFolder2\
C:\folder\codeFolder3\
The Main Source Folder is C:\folder\codeFolder1\
The AppProj adds the LibProj in the Flex Library Build Path. I check the Source Attachment of the LibProj and it is pointing to C:\folder\codeFolder1\ which is LibProj's Main Source Path.
Now if I hit F3 or CTRL+CLICK on a class that is in the C:\folder\codeFolder2\ or C:\folder\codeFolder3\ folder, I get the source not found in the swc error.
How can I specify multiple source attachment or how do I solve this problem.
Thanks

In textLayout_build.zip is the source code. http://sourceforge.net/projects/tlf.adobe/files/3.0/current/textLayout_build.zip/download
All versions of the source code contain CONFIG statements, including the internal ones.

How to retrieve "KeyValue" from multiple Shape paths then "SetValue" to Mask path Keyframes?

Hello AEScriptsComm.,..
i have one question (hopefully the tutorer will answer soon), which is the goal and reason i'm learning ExtendScripts:
I have a few dozen Adobe Illustrator, imported Shape Layers with paths "Created..from Vector Layers" in AEffects.
In order to use a .jsxbin script to change every path to the same number of verticies for animating, i must 1st convert them to Keyframes on the same Mask Path property.
1) i hoped to please be shown\sent an example showing how to,..
a) Get\Retrieve "KeyValue" from multiple, single (Shape Layers):Outlines > Contents > Group > Path > Path as shown in screenshot "4-CreateShapeFromVecLyr2Outlines.JPG",
and then,..
b) "SetValue" from those paths into Mask > Mask Path keyframes also in screenshot "1-ExtendScript_ShapePathsTOMaskPathKeyframes.JPG"?
Really appreciate any help soon as time allows,
Jeff

Hello Xavier,
esp. with my limited experience i can't determine how your concise script works.
Because it 1st errors esp. with undefines i'm thinking at best its incomplete (or algorithm) to give me the gist and i'm to fill in the blanks, which i am doing with the sort of working code example pasted below.
Its written with every definition, declaration and initialization completed, so a novice like me can read the manuals, rev. eng. pertinant script(s), then with fragmented code and understanding quickly connecting to form a complete custom script, as we've all done.
like this:
var comp = app.project.activeItem:
var layer = comp.layers.addSolid([1,1,1,], layerName, comp.width, comp.height, 1.0, comp,duration);
therefore,..
var CompLayerSolid = app.project.activeItem.layers.addSolid([1,1,1,], layerName, comp.width, comp.height, 1.0, comp,duration);
..then with such direct access in other essentials, i can substitute compatible properties, methods, parameters etc. and remaining code that affect the layer objects i need to control simultaneously. Also thereby learning more complex code quickly enough to use.
Only, i hoped to save time here by those already familiar.
But by comparison your script without declarations or many references in AE's CS6 Scripting Guide and online, i can't decipher or understand,
although you wrote this more complete segment at CCow:
"shapeLayer.content.addProperty("ADBE Vector Graphic - Fill");",
..in which is the addProperty i 1st looked for in your script after erroring with "ShapeLayer is undefined"
But i could'nt find a ref. to either .content or content. anywhere in ExtendScript, nor "targetLayer.mask", and "targetLayer" i found once in ref. to ExtendScript as an AE layer name. So perhaps their your variables?, you see i can't determine or use.
i don't know that was'nt meant, maybe a bit to tell me do my own research?, no offence, can't confirm that without reply, hope you will, but my research is why i'm here and your probably advanced script could only help with your assistance.
Thanks anyway,
Cheers.
function()
var comp = app.project.activeItem;
var masksLayer = comp.selectedLayers[0];
var masksGroup = masksLayer.property("ADBE Mask Parade");
app.beginUndoGroup(rd_MasksToShapesData.scriptName);
// Create an empty shape lay
// Get the mask layer's pixel aspect; if layer has no source, use comp's pixel aspect
var pixelAspect = (masksLayer.source != null) ? masksLayer.source.pixelAspect : 1.0; //copixelAspect;
// Iterate over the masks layer's masks, converting their paths to shape paths
var mask, maskPath, vertices;
for (var m=1; m<=masksGroup.numProperties; m++)
var suffix = " Shapes";
var shapeLayer = comp.layers.addShape();
shapeLayer.name = masksLayer.name.substr(0,31-suffix.length) + suffix;
shapeLayer.moveBefore(masksLayer);
var shapeLayerContents = shapeLayer.property("ADBE Root Vectors Group");
var shapeGroup = shapeLayerContents; //.addProperty("ADBE Vector Group");
//shapeGroup.name = "Masks";
var shapePathGroup, shapePath, shapePathData;
// Get mask info
mask = masksGroup.property(m);
maskPath = mask.property("ADBE Mask Shape");
// Create new shape path using mask info
shapePathGroup = shapeGroup.addProperty("ADBE Vector Shape - Group");
shapePathGroup.name = mask.name;
shapePath = shapePathGroup.property("ADBE Vector Shape");
shapePathData = new Shape();
// ...adjust mask vertices (x axis) by pixel aspect
vertices = new Array();
for (var v=0; v<maskPath.value.vertices.length; v++){
vertices[vertices.length] = [maskPath.value.vertices[v][0] * pixelAspect, maskPath.value.vertices[v][1]];
shapePathData.vertices = vertices;
shapePathData.inTangents = maskPath.value.inTangents;
shapePathData.outTangents = maskPath.value.outTangents;
shapePathData.closed = maskPath.value.closed;
shapePath.setValue(shapePathData);
shapeLayer.transform.anchorPoint.setValue(masksLayer.transform.anchorPoint.value);
shapeLayer.transform.position.setValue(masksLayer.transform.position.value);
shapeLayer.transform.scale.setValue(masksLayer.transform.scale.value);
if (masksLayer.threeDLayer)
shapeLayer.threeDLayer = true;
shapeLayer.transform.xRotation.setValue(masksLayer.transform.xRotation.value);
shapeLayer.transform.yRotation.setValue(masksLayer.transform.yRotation.value);
shapeLayer.transform.zRotation.setValue(masksLayer.transform.zRotation.value);
shapeLayer.transform.orientation.setValue(masksLayer.transform.orientation.value);
else
shapeLayer.transform.rotation.setValue(masksLayer.transform.rotation.value);
shapeLayer.transform.opacity.setValue(masksLayer.transform.opacity.value);
// Match the mask layer's transfor
// Mute the mask layer
masksLayer.enabled = false;
app.endUndoGroup();

Multiple Float Paths

Similar Messages

Maybe you are looking for