Multiple images onto frontpanel

I try to simultainously display multiple images inside/onto a front panel. How is this posible without getting the images "floating" around onto the panel? (They shall stay on top, but be attached to the panel.)
I have tried using a sub-vi called Make Child.vi which someone have made, but this only works for one image, the rest of them "floates"
Help?

Sondre,
The Make Child vi has a bug in it that only allows you to make window 0 into a child panel. I cleaned up the vi and fixed it so that you can make any IMAQ display a child window. My version is attached.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Make_IMAQ_Child.vi ‏40 KB

Similar Messages

Printing multiple photos onto one page

Sorry, fairly new to PSE9!
Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame. They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size? A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see! I'm sure I must be missing something here!
Any help much appreciated! Don't want to waste photo paper printing each small photo individually!

http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
Post #6 in this thread provides standard directions.

How do you print one large image onto multiple smaller sheets?

For example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.

I think you have your calculations wrong. It would take four sheets of paper to have the same size image because you have to double in both directions. I think printing an image on multiple pages is a function of the printer. If your printer has that capability then the options will be in the printer driver. Otherwise, I guess you could try to create virtual copies and crop each one individually and print them and hope they match up.
My printer does not have that capability, so I'm not familiar with how it would work. But it might be necessary to print outside of Lightroom in order to me that feature function properly. If it sounds like I don't know what I'm talking about, that's probably because I don't, really.

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

Is there a way to add multiple images at the same time to Keynote 6.0?

I just brought keynote after searching online about adding multiple images to a presentation all in one go - I couldn't do this on the powerpoint version I was using but there were multiple references on google to being able to do this on keynote. I purchased it and now can't get it to work! Any ideas anyone? Thanks

Do you mean like dragging in multiple images and having one image go on each slide? If so, you just drag the images into the Slide List on the left instead of onto the slide. From this prior post.
https://discussions.apple.com/message/9068283#9068283

What's the best way to put a programmatically sizeable transparent image onto a VI front panel

The problem is twofold: 1) how can programmatically read a transparent image (i.e. image with transparent background) and 2) how can I programmatically position and size that image onto a VI front panel. The best luck I had with item 2 was with a boolean custom control with an imported image. However, this control does not have a programmatic method for importing an image, so the image had to be manually cut&pasted into the custom control.

Hi,
If the image is static, it's possible. You can drop a metafile on the front
panel, and use Panel>Decorations> to get a reference to the image. Resize it
as desired.
Changing the image (e.g. from file) is not possible this way, but you can
put multiple images on the screen and change the visibility...
If you want to make a picture viewer, I'd consider an activex control (this
way you can load several picture formats without any programming).
Regards,
Wiebe.
"Jim Campbell" wrote in message
news:506500000008000000AF4E0000-1023576873000@exchange.ni.com...
> The problem is twofold: 1) how can programmatically read a transparent
> image (i.e. image with transparent background) and 2) how can I
> programmatically position and size that ima
ge onto a VI front panel.
> The best luck I had with item 2 was with a boolean custom control with
> an imported image. However, this control does not have a programmatic
> method for importing an image, so the image had to be manually
> cut&pasted into the custom control.

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

Lightbox with multiple images attached to one thumbnail?

Is it possible to have one thumbnail allow you to scroll through multiple images without having to click on another thumbnail?
For example, lets say that I have three projects with 10 images per project. I only want to have three thumbnails which will allow the user to see each project by clicking on it's "master" thumbnail.
Thanks.

If your intent is to have a single thumbnail (image) that your visitors click and it launches a Lightroom with Slideshow, you can try the following.
The gist :
Insert Slideshow Widget into target of Composition Widget
The details :
01. Drag & drop the Lightroom Display Composition Widget onto your design surface.
02. Drag & drop a Slideshow Widget into (this is the important bit) the Target of the Lightroom Display Composition Widget
The Target is the large area of the Composition Widget
The Target is what appears as a light box when you click on the Trigger (the smaller boxes)
03. Add your thumbnail image to the Trigger of the Lightroom Display Composition Widget (the smaller boxes)
Style it :
You're now ready, style your widgets and replace the images of the Slideshow Widget and you'll have the effect you're looking for.
Very crude example :
http://slideshowwidgetincompositionwidget.businesscatalyst.com/index.html

Multiple image selection.

Hi java professionals...
I have a coursework, to write an interface for NIM game.
My main problem is to select multiple images.
Basically I need to code something similar to this (http://www.robtex.com/robban/nim1.htm) design, like select several images, press the button and images should disappear.
Does anybody now how to do multiple selection of images? if it is possible of course..

You just need to capture mouse presses and do your
painting (images and such) onto a component.
You can use this to emulate "selecting images".
It would work something like this.
Paint your image somewhere in the component.
On a mouse click check if an image resides at that location on the
screen. If so set a virtual "selected" flag and draw whatever is
necessary to present it as such.
Good luck.

Insert multiple images

How to insert multiple images into html document ?
From the menu Insert > Image you can't choose more than 1 image... how strange is that ?!?

Well ... here's one way you can put 100 photos onto a page in DWCS4
First - be sure all photos are web ready - I had one straight from my camera and at 4+MB it was a bit TOO LARGE!)
Next - have them in a folder outside of DW and select them.
Next - drag them into Design View and drop them and answer all the popup screens
Like this:
Respond to the following:
And Picture One is there .... continue several hundred more times (though is goes pretty fast)
and now there are five ....
And in a browser -
And browser resized -
Hope this helps ..... But like Nancy says "Happy Clicking"

Best way to scan multiple images

Hi there,
I am new tp Photoshop and have a project already that I want to do with Ps, but am unsure of the best way to go abut ahceivng what I want...
I want to scan all my older photo's, crop & straighten them for later use in a slide project done in Permiere Pro.
I was wondering how best to scan them in, do I scan 1 at a time, deal with that then onto the next? or is it beter to scan several of them in one and amd crop each one out of the scan?
The problem I can see with scaning multiple at once, is getting to optimum settings for each image (mix colour and B&W).
Time is not a huge issue, although I can imagine that once I start, I will wan to get it done, but I would prefer to take time for quality results, but is it ideal to scan multibple & if so, would the qulaity be worse doing it in multiple?
Cheers
Rossco

Photoshop has a crop and straighen feature, which will divide up multiple images when more than one image is scanned at once. After the images are divided up, then you can use photoshop tools to adjust the color, remove dust, etc. I find using the levels command seams to work just fine for quick color correction. But if you have the chance to use camera raw that would be a better choice since most of your tools are in a single dialog box. Both camera raw and the levels adjustment layer are non-destructive, which means you can change your mind at a latter date.

Printing multiple images on single page

Can anyone explain how to print multiple images on the same page such as 4-4x6 photos? Or the same image more than once on a page - similar to the N-up option in iPhoto? Anything new and helpfull for printing in 1.5? Thanks.

No, it isn't what we're looking for.
Let's take the example of a professional portrait photographer (me? ) trying to set up a home-lab with a wide format, roll printer.
I get an order for, say, 2 4x5 of image 1, 2 4x5 of image 2, 4 5x7 of image 3. I have 10" paper loaded in my roll.
What I would want to do is gang the prints onto 3 "units" - the 4 4x5 on one 8"x10" unit, and 2 5x7 on each 7"x10" unit.
Since my clients ordered specific sizes, I need to make sure I get the prints sized exactly right (contact sheet tool doesn't let me do this) and since printing is pricey, I want to make sure to waste as little paper/ink as possible. I also don't want to get stuck doing a lot of trimming.
So, in lightroom, photoshop, imagebuddy, portraits-n-prints etc, I would just ask the app to output the package for me. In Aperture, I'm stuck. I can't use the book tool because it uses a (moronically) fixed page-size. I can't use the contact sheet tool because it doesn't let me specify image size/aspect ratio. I can't use the "standard" print tool because it only prints one image per page.
This is a glaring omission, and a slap in the face to the professionals that Aperture claims to see as its target audience.

Multiple Images Questions

Hi,
I am a total beginner with Flash however I have bought a
template for my website and wish to make some additions to it.
Basically when the template loads up it always has a main
image present and the page options down one side. What I would like
to do is have multiple images set for the opening image so that
everytime you enter the site you will view a different main image.
I'm sorry if I haven't explained this correctly. If you
follow this link www.gsa.ac.uk and hit refresh a few times you
should get what I mean.
Is there some sort of online guide I can follow to do this ?
Thanks
Euan

Aperture excels at converting your digital negatives from RAW, organizing them in any way you want, and developing each Image to be as good as you can make it. It is not, however, a graphics program -- the difference being, primarily, that graphics programs are built from the ground up to perform compositing. Photoshop, and the like, are excellent at compositing. Aperture is not.
The answers to your questions:
1. No.
2. This is actually a more complex question than it seems. With Aperture you can Lift adjustments from any Image and Stamp them onto any other Images. For panoramas, however, what you want is not "the same exposure _adjustment_", but rather the same final exposure. There is no way to do this, afaik, in Aperture. Good panorama stitching programs will make adjustments for you to even out the shot-to-shot variation in exposure. You should not use any automatic exposure modes when capturing the pictures you intend to stitch together.
3. Let the panorama program do it for you. I make RAW captures, convert and stack in Aperture, export as TIFFs, create the panorama (I've used Hugin -- open source and free -- and found it excellent for my modest needs), import it into Aperture and set it as the Stack Pick. I use Aperture to make adjustments to the imported panoramic Image.
Message was edited by: Kirby Krieger -- link added.

Keywords won't Apply to Multiple Images

I just bought a new iMac and have transitioned to Mavericks and Aperture 3.5.1. I just noticed that I can't seem to apply keywords to multiple images. When I select a number of images (usind click then shift-click on the last, or command-click on several), and then drag a keyword onto the selected images, the keyword only appears on one of the images. I've looked for some setting that needs to be changed, but can't find anythiing. Any ideas? Anyone else experienced this?
Thanks

Do you have Primary Only set?
See Tool Strip from the Aperture manul

Adding multiple images for tiled background?

Hi,
I'm having some trouble trying to add multiple images to the my tiled layer class. I can't figure out a way how to add these images to my current code. My goal is to add at least 4 images onto the screen.
Here's my code:
private void buildBackground() throws IOException
        Graphics g = getGraphics();
        Image tileImageOne;
        Image tileImageTwo;
        Image tileImageThree;
        Image tileImageFour;
        TiledLayer tiles;
        try
            tileImageOne = Image.createImage("/tile_1.png"/*, "/tile_2.png",
                    "/tile_3.png", "/tile_4.png"*/);
            tiles = new TiledLayer(11, 14, tileImageOne, 20, 20);
            int[] grid={
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                1,1,1,1,1,1,1,1,1,1,1
            for(int i=0; i<grid.length; i++)
                int column = i%11;
                int row = (i-column)/11;
                tiles.setCell(column, row, grid);
tiles.setPosition(GAME_ORIGIN_X, GAME_ORIGIN_Y);
tiles.paint(g);
catch(IndexOutOfBoundsException e)
e.printStackTrace();
catch(IOException io)
io.printStackTrace();
Edited by: vopo on Sep 22, 2007 4:35 PM

I've read the API.
But the thing that confuses me is the uploading of images. I can't figure out how by uploading different images can the code recognize which one would go into the tile.
-I know in the api it shows different numbers to display each tile used with a specified image. But I can't figure out how to code it.
Here's my attempt
private void buildBackground() throws IOException
        Graphics g = getGraphics();
        Image tileImageOne;
        Image tileImageTwo;
        Image tileImageThree;
        Image tileImageFour;
        TiledLayer tiles;
        TiledLayer tiles2;
        try
            tileImageOne = Image.createImage("/tile_1.png");
            tileImageTwo = Image.createImage("/tile_2.png");
            tiles2 = new TiledLayer(11, 14, tileImageTwo, 20, 20);
            tiles = new TiledLayer(11, 14, tileImageOne, 20, 20);
            int[] grid={
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                0,0,0,0,0,0,0,0,0,0,0,
                1,1,1,1,1,1,1,1,1,1,1
            for(int i=0; i<grid.length; i++)
                int column = i%11;
                int row = (i-column)/11;
                tiles.setCell(column, row, grid);
tiles2.setCell(column, row, grid[i]);
tiles.setPosition(GAME_ORIGIN_X, GAME_ORIGIN_Y);
tiles.paint(g);
tiles.setPosition(GAME_ORIGIN_X, GAME_ORIGIN_Y);
tiles.paint(g);
catch(IndexOutOfBoundsException e)
e.printStackTrace();
catch(IOException io)
io.printStackTrace();

Multiple images onto frontpanel

Similar Messages

Maybe you are looking for