Multiple Industry Solutions in One System

Hi,
Could anybody please confirm if multiple Industry Solutions can be turned on within a single SAP instance (e.g. CPG and Life Sciences)?
Thanks in Advance.
Regards,
Mahendra
Edited by: Mahendra Parachuri on Mar 28, 2009 4:06 AM

Hi,
Please click [Multiple Industry Solutions in One System|http://www.entegreat.com/eg_industrysolutions_casestudies_foodandcpg_mde.htm] for your reference.
With Regards,
Krishna.

Similar Messages

How to combine multiple Unmanaged Solution to one single Managed solution

Hi,
How to combine multiple Unmanaged Solution to one single Managed solution.?
There were some other third party developer have kept things lik ein UAT there are 2 release solution and both are Managed Solution.
And in Production the changes are only deployed for release 1 and for the release 2 changes deployment needs to be done.
But when i import that second release Managed Solution from UAT to Production then i got number of elements missing but i have checked they are already there in Soolution.
I did some R&D on this but not much helpful.
I thought i require to convert Unmanaged Solution of Production environment to Managed first for first release and then needs to import Managed solution of UAT to Production for second release.
Is this the right way to overcome form this situation?
Any help and response would be really appreciated.
Thanks.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Hi,
You can prepare unmanaged solution by adding all the components from the default solution,which are there in the managed solution, If Customizatiable entity is true in the managed solution.

How can we configure or use SAP industry solution in ECC IDES

Hi
Hope all are fine and having a nice time. i have read almost all posts relating to above topic, i want to ask from you people, is there any way to use multiple industry solutions in IDES system? because IDES is a learning solution not production and it should open all learning areas. I have seen mant posts but transaction "SFW5" doesn't fullfill our requirements.

Thanks a lot Bill for your kind answer
i would like to know that how can we active desire IS during IDES installation? because while we install ECC IDES, there is no option to active desired IS. by default it set to FI/CX.
Thanks
Usman Tufail

Multiple SAP Business One in one system.

Hi,
I have a requirement that , 2 SAP B1 ADD-ON (Using VB.NET)need to run in one system at a time.
We use these---
--Same SQL Server and different Databases
--SAP B1 username are same
--My ADD-ON is not working in both SAP B1 's. If i click any form in first B1 ,form is opening on second SAP B1.
Please tell it is possible to run multiple SAP B1 in one system.
Edited by: Yughandar on Oct 18, 2011 9:00 PM

Hi.....
Off course it is possible.
It is possible in case of same DB as well as different DB also.
If you have same DB then you can do it by accessing SAP through different User Codes and if you have different databases then it is possible with same user code also........
Please check...........
Regards,
Rahul

SAP IS-Auto & SAP IS-Utilites in one system

Hi,
This is with reference to the thread link give below.
[Combining different IS solutions on one system;
Is it possible to activate SAP IS-Auto and SAP IS-Utilities in one System.
Also if possible please clarify whether SAP IS-Auto and SAP IS-Utilities are considered an enterprise extension or an enterprise add-on
With thanks & regards,
Vinodh

Thanks Bill !
As per the thread, Difference between enterprise extension and enterprise add-on SAP Auto is an add-on.
Since SAP ISU is an extension and SAP Auto is an add-on and as they don't share FICA, can we say that both SAP ISU and SAP Auto can be activated in the same system?
Thanks & regards,
Vinodh

Multiple Creative sound devices in one system

-Multiple Creative sound devices in one systemrHello community, I recently tried to get two X-Fi Titanium PCI-Express cards to work in one computer. One card worked well. As soon as i plugged in the second card and booted the system, i got a quite reliable bluescreen SYSTEM_EXIT_OWNED_MUTEX, which indicates improper handling of shared ressources by the driver. I performed extensi've testing on two different machines with both Windows 7 64-Bit and Windows XP 32, freshly installed and patched, latest drivers, no other software or sound hardware present, but the problem persisted. I contacted support an was told that a such a combination is neither tested nor supported by Creative. So now I am stuck with two expensi've cards, that don't work together. Is there any information from Creative which devices will work flawlessly together if combined? For example the X-Fi Go!. It's USB. How many of those will work together in one system? (if more than ) Can I plug in a Soundblaster Play USB device simultaniously? Does Creative test for things like these? And why ist there a "Select Audio Device" option in the Creative Console application if multiple cards don't work?

Hi Suresh
Generally it is not possible to activate two industry solution in
switch framework .(transaction SFW5) ..But we can make the activation
of industry solution as client dependent and client independent . if we
make it as client dependent then we can activate different industry solution
for each client
To know whether the activation is client dependent or client
independent you need to check table SFWPARAM for any entries. If it
does not have any entry then its client independent (repository changes)
It affects all the clients. Please make entry in table SFWPARAM
and try !
I hope this information helps
Regards
VV

Multiple IS components activation in one system

Hi all,
One curious clarification required: Can we activate multiple IS components (more than one) in one system?.
If so, please share your experience and & which are all the components can go together?.
My understanding is few IS-components can be implemented in 1 system.
Please share your thought on it.
Thanks & Regards,
Suresh

Hi Suresh
Generally it is not possible to activate two industry solution in
switch framework .(transaction SFW5) ..But we can make the activation
of industry solution as client dependent and client independent . if we
make it as client dependent then we can activate different industry solution
for each client
To know whether the activation is client dependent or client
independent you need to check table SFWPARAM for any entries. If it
does not have any entry then its client independent (repository changes)
It affects all the clients. Please make entry in table SFWPARAM
and try !
I hope this information helps
Regards
VV

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

SMSY//Logical component definition - multiple roles for one system?

Dear all,
as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
--> What are the consequences of assigning multiple roles to one system?
--> Is there anonther option than assigning multiple roles?
Best regards
Nick

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Multiple BW instances on one BO system

Hello experts,
The infrastructure setup of my project is to have 2 separate BW instances (testing and training) to be connected to the same BO system.
When setting up a BOJ connection (from Universe Designer), we need to specify the Application Server (ie. IP address of the BW instance). So it seems BOJ connection is BW instance-specific. However, we don't want to create separate sets of Connections (and hence, Universes & Queries) for each BW instance.
Is there any way for one Connection (and hence, Universe & Query) to be shared across 2 BW instances?
If this is not possible, is it possible to copy the Connection (plus Universe & Query) for BW instance #1 to a another Connection for BW instance #2? This is to simplify the effort of setting up BO for the second BW instance.
Thanks in advance for any suggestions.
Linda

Hi Ingo,
Thanks for the information. I too have same scenario to work out.
Is there any possibility of automatic Source/server name conversion from system A to System B while copying all the Universes and Queries.
For Example: In BI we have an option to datasource server name change convention while transporting from one system to another system through out the landscape.
As you said in your reply, in life cycle manager, do we need to edit connection for each & every universe or any option for one and all universes.
Any documentation on this is appreciable...
Please provide me information.
Thanks in Advance.
Regards,
Ravi Kanth

How do I: put multiple PDF pictures into one PDF page?

I have just installed Adobe Acrobat Pro Ver 9 - so this apllication and its associated SDK are the only applications available to me for use.
Adobe Acrobat was chosen because of its AutoCAD capabilities (when AutoCAD is not present). i.e. Using Acrobat & AutoCAD's plot configuration files & Pen / colour selection table ensures the output has correct line thicknesses (sometimes colours in CAD are used to represent a line's thickness) - this is preserved when using Acrobat.
The generated output is fantastic. However, when I try to print the output via Excel / Word (used for layout) - my perfect output is reduced to imperfect results.
So: is it possible to layout multiple PDF pictures inside one PDF entity for printing purposes such that the original output is not distorted?
I have in the past put pages in front or behind other pages but cannot find any references or code that works with Pro 9 nor indeed the manual way to insert PDF pages at any location on a single PDF Page?
I'll try and explain. My template coud consist of 6 boxes on a single A4 page thus:
My base PDF Page (can be thought of as a template - ideally it wont be printed - but even if it is - it wont be printed on any media material) has 6 areas (any number of areas up to 100) on it. In each area, there is a box. It is within these boxes that I wish to place a PDF Picture. Not all pictures will be the same. How can I do that? Ideally I'd like some example C# code - though doing it as a user will suffice, for now.
Is there a way of programmatically selecting each of the above boxes on the base PDF Document?
I do know of one manual method (though it seems long winded) and it is not accurate enough in that (even though the layers are deselected) - the hidden layers are subsequently outputed too - not good!
Uses a button icon over each box.
All the current Adobe help for the SDK refers to Pro 8 and previously - which all seems to have now been replaced in Pro 9
This question will be placed in the Developer & User Forums - as it pertains to both.
Thankyou in advance for anyone that either knows any workarounds or any ways to affect a solution.

Picture of what I want to see:
What I get, and don't want to see is:
The PDF was generated using Adobe Acrobat Pro 9 from an AutoCAD LT (DWG) file without AutoCAD being present but making use of a plot configuration (PC3) file & pen table (CTB) file. The resultant file [WhatIWantToSee.pdf] is perfect - all the lines are the right thickness & colour and are perfect vectors (with no construction / proofing layers visible). When you view that file in Acrobat and show the "Layers" property box, you see that the correct number of layers whilst are still present are indeed turned off.
However, when I add a forms-button to one of the rectangles (please refer to initial post - where there are 6 rectangles), and display same file as icon display. The resultant view is the one shown above named [ What I get and don't want to see]. It seems the saved layer settings are all ignored?
I generated the PDF file through Adobe Acrobat Pro 9 Menu | File | Create PDF | From File (Files of type Autodesk) | Options | Selected Layers | Layout | Last Active Layout.
Rectangles are regular content elements - not fields (in the general meaning of form-fields).

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

How to use two jdk versions in one system.

Hi All,
Am working for two projects, in one i have to use jdk1.4 and in the second i have to use jdk1.5, how can i have two jdk in one system, am using windows xp, in that if i create two accounts and install two jdk's will it accept? what is the solution for this.
Thanks,
vyrav.

I have 1.3, 1.5, and 1.6 installed here. You can install them wherever you like, and use the %JAVA_HOME% system variable to point your tool(s) to the desired one that you wish to use.

Have multiple iTunes libraries on one machine?

Hi,
I want to have multiple iTunes libraries on one machine (with two different hard drives, internal fore mp3s and external for AAC files). One library is composed of mp3s for an iPod, I want the other library to have AAC audio files for burning CDs. I would rather the libraries not be mixed.
I have read the article (#301748) for migrating an iTunes library and am preparing to migrate one of the libraries on to a external hard drive.
I have read about using Libra to maintain two different libraries on one machine. I was wondering if anyone does this and if they have encountered any problems? Is there a better solution?
Thank you,
TPK

It's one thing to want two music libraries on one machine and another to want two music libraries on one user account. For the latter, here's what I've done.
I created folders in my iTunes folder called, say, Main Library Folder and Second Library Folder. (These could be anywhere you find convenient.) I dragged my regular iTunes Library file into the Main Library Folder. Then I opened iTunes and created my second music library. When I finished that, I closed iTunes and dragged the just-created iTunes Library file into the Second Library Folder.
If I want to use my main iTunes library, before opening iTunes I drag an alias (Cmmd-Option-drag) of the iTunes Library file from the Main Library Folder into the iTunes folder. Then, when I open iTunes, iTunes reads my main library file. And of course, it works the same way for the second library.
Of course, you could just shuffle the actual library files into position in the iTunes folder from their holding areas, but I strongly preferred to get myself into the habit of relying on aliases, so I could leave the actual library file alone in their respective folders. You most definitely would not want to accidentally overwrite one of your iTunes Library files.
I'm sure one of the shareware products would do a more elegant job, but this just shows you that it's not a difficult process.
The alternative is to set up separate user accounts to access different libraries on the same machine. This has real benefits and, to me, should be the first option one considers. It's easier on the brain, as it sticks to iTunes' one-user-one-library model, and there's absolutely no risk of getting libraries confused. Fast User Switching on the Mac makes going back and forth between accounts easy. But if you really want to avoid using different accounts, and it's only you that has to keep things straight, the approach of jumping back and forth between different libraries in the same user account should be OK.

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

Multiple Industry Solutions in One System

Similar Messages

Maybe you are looking for