Multiple IS components activation in one system

Hi all,
One curious clarification required: Can we activate multiple IS components (more than one) in one system?.
If so, please share your experience and & which are all the components can go together?.
My understanding is few IS-components can be implemented in 1 system.
Please share your thought on it.
Thanks & Regards,
Suresh

Hi Suresh
Generally it is not possible to activate two industry solution in
switch framework .(transaction SFW5) ..But we can make the activation
of industry solution as client dependent and client independent . if we
make it as client dependent then we can activate different industry solution
for each client
To know whether the activation is client dependent or client
independent you need to check table SFWPARAM for any entries. If it
does not have any entry then its client independent (repository changes)
It affects all the clients. Please make entry in table SFWPARAM
and try !
I hope this information helps
Regards
VV

Similar Messages

Multiple Creative sound devices in one system

-Multiple Creative sound devices in one systemrHello community, I recently tried to get two X-Fi Titanium PCI-Express cards to work in one computer. One card worked well. As soon as i plugged in the second card and booted the system, i got a quite reliable bluescreen SYSTEM_EXIT_OWNED_MUTEX, which indicates improper handling of shared ressources by the driver. I performed extensi've testing on two different machines with both Windows 7 64-Bit and Windows XP 32, freshly installed and patched, latest drivers, no other software or sound hardware present, but the problem persisted. I contacted support an was told that a such a combination is neither tested nor supported by Creative. So now I am stuck with two expensi've cards, that don't work together. Is there any information from Creative which devices will work flawlessly together if combined? For example the X-Fi Go!. It's USB. How many of those will work together in one system? (if more than ) Can I plug in a Soundblaster Play USB device simultaniously? Does Creative test for things like these? And why ist there a "Select Audio Device" option in the Creative Console application if multiple cards don't work?

Hi Suresh
Generally it is not possible to activate two industry solution in
switch framework .(transaction SFW5) ..But we can make the activation
of industry solution as client dependent and client independent . if we
make it as client dependent then we can activate different industry solution
for each client
To know whether the activation is client dependent or client
independent you need to check table SFWPARAM for any entries. If it
does not have any entry then its client independent (repository changes)
It affects all the clients. Please make entry in table SFWPARAM
and try !
I hope this information helps
Regards
VV

Using multiple motion driver versions on one system...(with Labview 6.1 and Labview 8.0)

Using Labview 6.1 and Labview 8.0 on same PC computer (my development system).
Labview 8.0 applications, I would want to use the motion 7.x drivers
Labview 6.1 applications, I want to use motion 6.x drivers
(Of course, Labview 6.1 can not use motion 7.x drivers).
When I installed Labview 8.0 and motion 7.x drivers, it removed my motion 6.1
drivers (and all the vi's) and installed motion 7.x drivers (with vi's).
Of course, Labview 6.1 applications can not run with motion 7.x drivers.
How can I keep my Labview 6.1 applications running and building
with motion 6.x drivers while still having Labview 8.0 applications
with motion 7.x drivers (all on the same system).
And then, of course, the executables, on other systems with the 6.x and 7.x drivers.

Unfortunately there is no way to install multiple versions of a
hardware driver on a single operating system. This is not only true for
NI Motion but for any type of peripheral hardware. Windows can only
assign a single driver to a specific piece of hardware.
From my point of view the best solution would be to upgrade your
LabVIEW 6.1 application to LabVIEW 8.0. If this is not possible for
some reason you could install a second Windows on another harddrive or
partition and install LabVIEW 6.1 and NI-Motion 6.x on this system and
LabVIEW 8.0 and NI-Motion 7.x on the other one.
Best regards,
Jochen Klier
National Instruments Germany

Multiple versions of FCP on one system

Hi guys just a quick question. I have FCP 5 installed on my mac. I am about to purchase Final Cut Studio 2, meaning FCP 6 will be installed on my system too.
Does this mean I will have to uninstall FCP 5 first or will I basically have two FCP's on my system. My only worry is that installing FCP 6 will overwrite/destroy a project that I'm currently editing on FCP 5?
Any suggestions or help on in?
Also is Final Cut Studio 2 compatible with OSX 10.4.11?
Thanks!!

When you install FCS 2 the higher version of FCP 6 will replace your installation of FCP 5.
You will not lose project files.
Also is Final Cut Studio 2 compatible with OSX 10.4.11?
Mac OS X 10.4.9 or later.

Having multiple sender components send to one receiver component ?

Hi,
the scenario is XI Proxy - Integration server Mapping - Web service call.
Here is my situation, I have many sender components which all have names that start with F (exp : F01, F02, F03) , and others that have names that start with I (I01, I02, I03) ,
Basically , I'd like to make a receiver determination that looks like sender component = F* and another receiver determination where sender component = I* this way all requests comming from F senders go to receiver A and all requests from receiver I go to receiver B.
Any idea how to do this... ?
Thanks
Edited by: Thierry Dagnino on Dec 17, 2009 11:48 AM

Basically , I'd like to make a receiver determination that looks like sender component = F* and another receiver
determination where sender component = I* this way all requests comming from F senders go to receiver A and all
requests from receiver I go to receiver B.
My questions:
1) Will Sender component name come in the source payload i.e. some node contain F01 or I01?
2) Why are you stressing on Receiver Determination? (no need to answer this Q if answer to first is YES)
When you want to implement a condition for F* or I* then you should be using the Contains Pattern option from the middle operand of the Condition Editor.....for more info refer this wiki (check screenshot no.6):
[http://wiki.sdn.sap.com/wiki/display/XI/XpathConditioninReceiverDetermination|http://wiki.sdn.sap.com/wiki/display/XI/XpathConditioninReceiverDetermination]
Regards,
Abhishek.

Multiple Ibase/components with one change request / interfacing Lotus Notes

Scenario: Our users post all their software change requests (not only for SAP) into an application based on Lotus Notes. Professionals of the IT department evaluate the requests and make a offer for each of the change requests. The users may (or may not) accept the offer and place an order - all this in Lotus Notes, and not only for SAP.
If that order is confirmed and points to the SAP environment, Lotus Notes automatically must involve Solution Manager by calling a rfc-enabled function module in the Solution Manager system. This function module has to create a Solution Manager Change Request (simulating CRMD_ORDER transaction) together with its maintenance cycle, task list and transport request.
Problem: One of the problems is, that Lotus Notes change requests for SAP environment often require changes to multiple logical components, like R/3 plus BW plus CRM.
Question: The question is, how to create a Solution Manager Change Request for multiple components? This is caused by the restriction of the input screen of CRMD_ORDER which allows only one Ibase/component assignment.
Do you already have worked on this or any idea that might help? I would appreciate very much if you would share your expertise. Thank you.

Hi Heiner,
The work around that I use is in my maintenance project I have added all the logical components that I will have to work with.(R/3, ECC 6.0, BW etc..) This way, when I created the Maintenance cycle, my task list had all of these systems/clients in it.
The only hick is that in the CRMD_ORDER transaction, you only can put one ibase component.
The above mentioned solution works if you combine all your systems into one maintenance cycle.
let me know if this sheds any light for you.
Salpi

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
 <f:facet name="second">
 <af:panelStretchLayout id="pa1"
 binding="#{backingBeanScope.Assign.pa1}">
 <f:facet name="center">
 <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
 binding="#{backingBeanScope.Assign.r1}"/>
 </f:facet>
 </af:panelStretchLayout>
 </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Multiple Industry Solutions in One System

Hi,
Could anybody please confirm if multiple Industry Solutions can be turned on within a single SAP instance (e.g. CPG and Life Sciences)?
Thanks in Advance.
Regards,
Mahendra
Edited by: Mahendra Parachuri on Mar 28, 2009 4:06 AM

Hi,
Please click [Multiple Industry Solutions in One System|http://www.entegreat.com/eg_industrysolutions_casestudies_foodandcpg_mde.htm] for your reference.
With Regards,
Krishna.

SMSY//Logical component definition - multiple roles for one system?

Dear all,
as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
--> What are the consequences of assigning multiple roles to one system?
--> Is there anonther option than assigning multiple roles?
Best regards
Nick

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Multiple SAP Business One in one system.

Hi,
I have a requirement that , 2 SAP B1 ADD-ON (Using VB.NET)need to run in one system at a time.
We use these---
--Same SQL Server and different Databases
--SAP B1 username are same
--My ADD-ON is not working in both SAP B1 's. If i click any form in first B1 ,form is opening on second SAP B1.
Please tell it is possible to run multiple SAP B1 in one system.
Edited by: Yughandar on Oct 18, 2011 9:00 PM

Hi.....
Off course it is possible.
It is possible in case of same DB as well as different DB also.
If you have same DB then you can do it by accessing SAP through different User Codes and if you have different databases then it is possible with same user code also........
Please check...........
Regards,
Rahul

XI and R/3 Installation on One System

Hi,
I am new To XI and I want to install XI and R/3 in My Local System. Can i install both in one system (OS)? If yes, what is the minimum requirement for this?
If any one have did this, please help me.
Thanks,
Sridhar

Hi Sridhar,
Download this Doc and Fallow...
http://help.sap.com/bp_scmv150/documentation/SCM50_system_reqs.doc
Fallow the below documentation...
System Requirements for
SAP Best Practices for SCM 5.0 Scenarios
Use
The objective of this document is to help system administrators to prepare an SAP SCM system for the installation of one or more SAP Best Practices scenarios and to ensure the system setup meets the requirements for the installation.
This document does not provide information on how to set up the entire SAP SCM system, itself, but provides you with useful additional information and troubleshooting tips.
System Landscape
To install one or more of the SAP Best Practices for SCM scenarios from this CD, you should refer to the system landscape described below and compare it with your own existing system landscape as an installation prerequisite.
Please note that the support package levels indicate the minimum support package level your system landscape should have. If higher support packages exist, we recommend that you install the highest available support package.
To install and use any SAP Best Practices scenario, you must have installed an SAP R/3 and an SAP SCM system.
SCM 5.0: Complete Version
SAP SCM 5.0 contains the following business application components on one system platform:
     SAP APO 5.0
     SAP EM 5.0
     SAP ICH 5.0
The following table provides an overview of the software component details of the SAP SCM system:
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYI77     Basis Plug-In (PI_BASIS) 2005_1_700
SAP_BW     700     0007     SAPKW70007     SAP NetWeaver BI 7.0
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform 7.00
LCAPPS     2005_700     0002     SAPKIBHD02     LCAPPS 2005_700 : Add-On Installation
EA-IPPE     400     0003     SAPKGPID03     SAP iPPE (EA-IPPE) 400
SCM     500     0004     SAPKY50004     Supply Chain Management 5.0
SCM_BASIS     500     0004     SAPK-50004INSCMBASIS     SCM Basis 5.0
QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
BI_CONT     702     0002     SAPKIBIHP2     Business Intelligence Content
Optimization Server Version:
Identifier     Version
CTM01     5.0_REL SP04, 356375
DPS01     5.0_REL SP04, 356375
CS01     5.0_REL SP04, 356375
SEQ01     5.0_REL SP04, 356375
SNP01     5.0_REL SP04, 356375
VSR01     5.0_REL SP04, 356375
Live Cache SP05 (LCA50.05, LC 7.6.00.22)
LiveCache version:     KERNEL     7.6.00   Build 022-123-119-055
DBM server version:      DBMServer 7.6.00   Build 022-123-119-055
Operating system:     SunOS
LCA version:          Module          50   Build 05
SAP APO GUI
We recommend that you install the SAP APO specific SAPGUI add-on, which is required for certain business transactions.
SAP ECC System
SAP ECC Enterprise with Extension Set 1 (for the SAP Best Practices scenario Fulfillment Visibility we used an SAP R/3 Enterprise system with Extension Set 2)
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYJ77     PI_BASIS 2005_1_700
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform
SAP_APPL     600     0004     SAPKH60004     Logistics and Accounting
EA-IPPE     400     0004     SAPKGPID04     SAP iPPE
EA-APPL     600     0004     SAPKGPAD04     SAP R/3 Enterprise Add-On PLM, SCM, Financials
FINBASIS     600     0004     SAPK-60004INFINBASIS     Fin. Basis
BP-ERP05     600V2     0000          SAP Best Practices All-in-One based on ERP 2005 (ECC 600)
SAP XI System
If you want to install the SAP Best Practices scenario Supplier Managed Inventory, Release Processing, Responsive Replenishment, Contract Manufacturing Procurement & Supply Network Inventory, Kanban-based Replenishment, you also need to implement an SAP XI system.
Software Component / PI Content     Release     Level     Highest Support Package     Short description of Software Component / PI Content
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
Content for SAP BASIS     700     0007          XI content for SAP BASIS 7.0
Content for SCM     500     0004          XI content for SCM 5.0
Content for SCM BASIS     500     0004          XI content for SCM BASIS 5.0
Non-ABAP components, such as the Integration Builder and the Integration Repository, must also be installed and have the respective support package levels.
For uploading the content in the XI System, refer to SAP note 836200.
Checklist after the System Setup
     SCM Menu
After you have installed the SCM System, you may have to set up the menu that you want to use.
To do this, access transaction SE38 and run the report /SCMB/SM_VERS.
Choose Full Version and then, choose Execute.
     Check Planning Version 000
In your SAP SCM system, use the following path:
SAP Menu  Advanced Planning and Optimization  Master Data  Planning Version Management  Model and Version Management
Make sure that the planning version 000 Active Version is available.
If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
     Check that PSE services have been activated
Use transaction strust in your SCM system. All services should have a green light. If it is red, activate all of them. There is no need to reboot the system afterwards.
OPTIMIZER
1.     Checking that the Optimizer has been installed
Transaction SM59  RFC Destination  OPTSERVER_CTM01  Test Connection
If the connection cannot be established, this may be due to the following reasons:
     the Optimizer has not been installed
     an error occurred during the installation of the Optimizer
2.     Checking that the Optimizer SPs have been installed
Open transaction /SAPAPO/OPT09. The Optimizer Support Packages should be identical to the Support Packages of the SCM system.
     Ensuring that the APO relevant PI Settings are activated in SAP ECC
You have to make sure that the business transaction events are active in the SAP ECC system. Only if these events are active for the SAP APO integration, will changes to the transaction data be transferred from the SAP ECC system to the SAP APO system. This setting should have already been performed; this is just a reminder in order to avoid possible problems later on. Use the following procedure:
In your SAP ECC system, open the transaction BF11.
Confirm the message The table is cross client.
On the Change View: Application Indicator: Overview screen, check that the applications ND-APO, PI-EM and NDI are active, i.e. selected. If they are inactive, select the check box to activate them.
Choose Save and go back.
Web Communication Layer (WCL)
Ensure that the WCL is installed correctly: Usually the WCL should be connected to the client 001 of the SCM system. Use transaction /saptrx/wcl_search in the SCM system to open the WCL. If a logon pop-up appears, then the WCL is set up correctly. If the message WCL is not installed... appears, the respective set up settings should be checked and corrected, if necessary.
Additional Information
For additional information on issues such as architecture, sizing, platforms, and upgrades, refer to following page on the Service Marketplace:
alias /SCM  SCM Technology
For information on system monitoring, system administration, volume testing etc., check SAP note 572003. You can also refer to the Service Marketplace, using the alias /SCM  SCM Technology  Table of Contents  Solution Management  Best Practices for mySAP SCM Solution Management.
Thanks,
Satya Kumar..

Two audio interfaces but different uses in one system

Hi,
I have already got an audio interface for recording and run smoothly.
Recently I get another audio interface (M-Audio Firewire 410). I want to add it to my system as a standalone mixer in which the outputs will be connected to 2 another active monitors, the inputs of this "mixer" are connected to audio outputs of a DVD player.
So, I can control the DVD volume by the knob on the Firewire 410 and by the M-Audio software in my Mac but my original audio set up doesn't change.
I mean, the DVD audio signal pass to the Firewire 410 then output to the newly added monitors only,my original monitors will not be affected (no DVD sound).
At the same, if I play mp3 in i-tunes, the music will output to my original monitors only.
Just like two independent audio set up in one system, is it possible ?
Thanks for any help in advance.
Cheers,
edtayin

You need to give complete details of the audio, exactly what is it, how many tracks, what's the channel configuration?
Can you post screen shots of what you're doing and what happens?
In expanding audio components in the timeline I can see what looks like an extra audio clip married to this one on a different track which has no signal, but I can't delete that additional audio clip.
Let's see this and the channel configuration in the audio inspector.

How to include multiple image components into a single custom component???

How to include multiple image components into a single custom component???

Hi Marcel,
an ABAP transaction can only run or at least be started on one single system. A portal transaction can be assigned using a URL. This doesn't need any logical component.
Regards
Andreas

How to remove a network activity for one employee from the worklist?

Hi,
We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
Regards,
Petter

Well for this pernr you need to have a special coding to check for network and pernr.
other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

Multiple version of Java on one machine

Is it possible to have multiple versions of Java co-exist on the same XP Pro machine?
Here is our scenario: we have apps that use Java 1.5, but we have one critical app that doesn't support that version yet. It has to use the 1.4 version. Is there a way to allow both versions to exist and be usable for their respective apps? If so, how?
Thank you.

I can't, however it's never a good idea to have
multiple versions of Java on one machine. Try and
standardise if possible. If OP used JAVA_HOME as you
often suggest, then he would be knackered wouldn't
he? JAVA_HOME can only point to one JDK. Your
advice is conflicting kaj.Nope. JAVA_HOME should always be defined in the start script/file for a java application, so it's not set per system. It's very common that companies have applications that requires different JDK/JRE versions, and it's usually very expensive to upgrade all applications (if it's possible at all). You can of course also alter the PATH variable if you want to in the script.
/Kaj

Multiple IS components activation in one system

Similar Messages

Maybe you are looking for