Multiple IP Addres one NIC Card..

So I found this article on Apple
http://developer.apple.com/server/optimizexserve.html
Unfortunately it did not work on 10.4 and if you look at the date on that, it would be 2003 so I was wondering how you do this? I have 15 IP's coming to my XServe G5 and I want to shy away from doing virtual hosting and use the IP's I have first, then do virtual if I need to. I followed that article and rebooted and in Server Admin it does not show more then my IP already. I did flip it down to other and type it in manually then apache would not start once I saved the changes. I have searched apple and google and so far that is the only article I can come up with. Found some for linux though...

It appears as though the /System/Library/StartupItems/IPAliases script which parses the /etc/IPAliases.conf file during startup is broken.
If you specify the IPAliases.conf file as per the directions in the article you reference it won't work.
Your options are to either edit the script to work correctly or change how you define your IP addresses in /etc/IPAliases.conf (I recommend the latter option).
The script does work fine if you use CIDR notation in /etc/IPAliases.conf.
That is, instead of using the form described by the technote:
interface:IPaddress:netmask
use:
interface:IPaddress/bits
The technote states that the subnet mask should always be 255.255.255.255 (which corresponds to /32), but I'm not sure of the reason for this. It seems to work fine with /24 (255.255.255.0) and other values.
In any case, edit /etc/IPAliases.conf to use /notation rather than :netmask and you should be fine.

Similar Messages

Multiple ipads on one credit card

I have 15 ipads (to start with) that need to be managed (financially) through one credit card. I've set up an iTunes account for each ipad but apparently can't use a single credit card on more than 5 or so iPads (according to iTunes support). They recommended that I do the VPP for Business. However, out of the handful of apps we plan to use, only 2 of them are available. Not everyone of our users have a corporate credit card and besides the ipads are going to change hands from job to job. So we do not want each iPad (and all the purchased apps) to be tied to an individual. How in the world is this possible?? Itunes support said that it was a security reason behind not letting us have more than 5 iPads tied to a corporate credit card but never gave me any specifics about WHY or WHO they were supposedly protecting. Please Please someone help me with this. I love Apple products but this is causing me to HATE the Apple company.
Thanks,
Chris

Some educational groups are looking at device "cloning" so you'd setup a number of devices with the same apps, IPCU profile etc. You might look at this site ( which was is great and was recommended by another member of this forum a while back)
http://ipadeducators.ning.com/forum
As you mention though, licensing is still an issue and the EULA, as I currently understand it allows an app to be shared across multiple devices used by one person, or one device used by multiple persons. Some educational groups use the VPP and assign a single license to one device/user and then purchase enough additional licenses to cover the other devices using the same AppleID, and keep track of the additional license purchases. Last I looked the VPP spreadsheet only allowed on Apple ID or device assigned per license...so you'd have to keep separate records someplace and hope that this satisfied any legal team that might check software compliance at some point down the road.
Another option would be gifting the app, though I'm not sure how this would work if the device was transferred to another user, with another email address/Apple ID...

Multiple contacts in one business card in Address book

Does anyone know if it is possible to add more then one contact into the same card. I have business contacts where sometimes I have two reps I work with. It would be great to have them on the same business card in the Addy book.
Any ideas.

You may need to use Add Field in Preferences/Templates to turn it on for new cards, or Card/Add Field for individual cards. Once on it can have label values such as "Friend" "Father" "Assistant" etc, or of course you can set your own. You put a name in the value portion of the field; subsequently clicking on the label allows opening of the card with the related name. You can have multiple related names on a contact card.
Unfortunately you can't set up the link automatically; it would be nice if you could drop one card on another and it would prompt you for which related field label to use.
You could for example have a master card for some company that you do business with, and on that card put links to the various people within the company.
AK

Bind multiple IP to one network card

Dear all,
I would like to ask how can I bind more than one IP to a nework card?
Thanks a lot!!!
Regards,
Vincent

<pre>
I mean,
ifconfig elxl0:1 plumb
ifconfig elxl0:1 <new_ip_address> up
Check by "ifconfig -a"
Thanks
Kalpesh
</pre>

Is it possible to install Oracle RAC (11gR2)on server having just one NIC ?

Hi all,
Please let me know if it is possible to install Oracle RAC (11gR2) on server having just one NIC card on linux (RHEL5.8).
by creating a virtual NIC like the real ethernet is etho and we are creating eht0:1 as virtual NIC, and i want to use this as eth1, so please suggest me if this is the workaround for my issue or not.... if not please suggest me the best way to install RAC on physical linux box running with one NIC card.
Thanks
@ble

Check if this thread is relevant
Single NIC card and RAC ???
Thanks,
Ajay More
http://www.moreajays.com

Second NIC card (eth1) not recognized

Hello,
I have two NIC cards setup. Linux is recognizing only one nic card as eth0 but not recognzing the second one. Any help is greatly appreciated. I am using Redhat Linux Enterprise ES 3.0
Thank you in advance

Thank you and here is the output:
lsmod:
Module Size Used by Not tainted
parport_pc 19076 1 (autoclean)
lp 9028 0 (autoclean)
parport 37088 1 (autoclean) [parport_pc lp]
autofs 13364 0 (autoclean) (unused)
tulip 43584 1
crc32 3712 0 [tulip]
sg 36940 0 (autoclean)
sr_mod 18104 0 (autoclean)
floppy 58160 0 (autoclean)
microcode 4724 0 (autoclean)
ide-scsi 12208 0
ide-cd 35680 0
cdrom 33696 0 [sr_mod ide-cd]
keybdev 2976 0 (unused)
mousedev 5524 1
hid 22212 0 (unused)
input 5888 0 [keybdev mousedev hid]
ehci-hcd 20104 0 (unused)
usb-uhci 26412 0 (unused)
usbcore 79392 1 [hid ehci-hcd usb-uhci]
ext3 91592 2
jbd 52336 2 [ext3]
ata_piix 4100 3
libata 27780 0 [ata_piix]
sd_mod 13744 6
scsi_mod 108840 5 [sg sr_mod ide-scsi ata_piix libata sd_mod]
lspci:
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2581 (rev 04)
00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03)
00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03)
00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03)
00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03)
00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03)
00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03)
00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03)
00:1f.2 IDE interface: Intel Corp.: Unknown device 2651 (rev 03)
00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
03:00.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
03:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
03:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 03)

Can there by multiple accounts under one id? I just loaded a $25 gift card and it showed up in my balance. My daughter, under the same id had $12.0 left from a previous gift card. Now only the $12.01 shows up and the $25 is nowhere to be found?

Can there be multiple accounts under one apple id? My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad. My daughter has what she believes is her $12.01 left from a gift card. My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Can I use multiple Apple store gift cards per transaction or is it has to be one gift card per transaction?

Can I use multiple Apple store gift cards (£25 each) per transaction or is it has to be only one gift card per transaction?? Does anyone know thanks

Hola, Eddy
notice that you have posted to an old thread (Oct-Nov2013) that actually took quite some time to get attention back then**
I recommend that you contact the Store Group regarding your purchase question - don't let the "iTune-ish" URL and page title throw you off... it's the right place
Store Group - Contact Us - Apple Support
** next time you have a question, I advise to check the dates carefully and if older than a month or so, AND it has no answer to your specific issue, start a NEW Question. You did a fine job of stating your exact issue - many folks, not so much.
buenos dias
CCC

Load balancing over multiple NIC cards

Is it possible to setup some kind of load balancing at the OS level on a V240 running Solaris 8?
I've got all 4 NIC cards populated (2 each on different subnets with clients coming from both subnets and elsewhere) and I've like to setup some load balancing at the operating system to (dynamically) route the load across the most appropriate interface. Is this possible? I feel I should be getting more bang for my buck here, but I just cant find any info on what I'd like to do.
Thanks for the help.

You can use IPMP in order to have load balancing for the outbound traffic. It's working fine, i have used it on many machines.
Now, if you want to trunk the throughput of your interfaces (for inbound and outbound traffic), you need to acquire sun trunking software. It can truncate up to 8 100Mbps interfaces, or up to 2 1Gbps interfaces.

Setting Up Dual NIC Cards? Benefit?

Hello Everyone,
I know that the Mac Pro line comes with Dual NICs and I was wondering how do I set these up to be useful with my Cable Modem and Router? Can they be used to get more speed or are they used together in some other capacity.
I really appreciate anyones help and expertise.
Many Thanks,
Chris

The normal use of dual nic interfaces would be to run double instances of a given server on disparate IP numbers. Dual NIC's are generally employed in order to attach multiple IP addresses to a single machine.
Another potential use for dual NIC's is internet connection sharing, where your Mac Pro acts as a kind of router; again also this could be used for attaching one NIC to print services and the other NIC for LAN/WAN access.
OK, actually there are a whole bunch of good reasons for dual NIC cards, but 'doubling your bandwidth' is really not one of them. Believe me, unless you are on a direct fiber OC-10 20 foot from your ISP's NOC, then your existing single NIC has 1000 times the bandwidth of your incoming WAN connection.
It is likely possible to interleave dual NIC cards between two machines for bandwith purposes; but if that were going to be the canse, just identify one as "in" and the other as "out" (both machines would have to have dual NIC's to make this mean anything) but again, I honestly do not see a real world use for this...
Message was edited by: psalmsmith

Multiple Libraries on one computer

I want to store more music in iTunes than my iPod has room for (original iPod). I want to use one library for music that I don't want on my iPod and the other for the music I want to sync. I also want to be able to move music back and forth between the them.
How do I store music in multiple libraries on one computer without making separate computer user accounts or using the playlist work around?
Any ideas would be greatly appreciated. Thanks, apple-rules

Yes, I am referring to the auto syncing of playlists. Not all of my music is assigned to playlists and I don't want to create them - too many songs.
As I mentioned in my original post:
I want to store more music in iTunes than my iPod has room for (original iPod). I want to use one library for music that I don't want on my iPod and the other for the music I want to sync. I also want to be able to move music back and forth between the them.
I want to be able to store music in iTunes and play that music in iTunes without having them downloaded to my iPod. It would be nice to have a Library in iTunes that can be separate from the iPod stuff.
I think I found a work around (#12). Until I get a better solution I am going to create a master folder to which I will move all my music that I do not want syncing to my iPod. Then, I will do a manual sync and exclude that folder.
Thanks everyone.

How to tell if nic card is working at 100mb or 10mb??

hello,
subject line says it all.
also, what would be best way to migrate to the open workgroup suite from
sbs6.5??
I'm running everything on one server. would like to add the blackberry
server to the new system. need to run citrix as well (only runs on
windows term server), this would be a seperate box.
would be using win2k3 server for citrix/term server on one box and
another box for running win2k3 with mssql 2005.
Thanks,
Oskar

Anders Gustafsson wrote:
> News novell,
>> subject line says it all.
>>
> Monitor, LAN/WAN, Look at the NIC stats. Almost all NIC drivers will
> report true speed/duplex there
>
> - Anders Gustafsson (Sysop)
> The Aaland Islands (N60 E20)
>
> Discover the new Novell forums at http://forums.novell.com
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
I'm getting max of 104KB per second.
This is pretty slow, isn't it? I think the NIC card on this server is
due for an upgrade. I'm looking at the intel pro server nics.
Any other suggestions? I'm looking for a nic card that is on the HCL
for netware 6.5
Thanks,
Oskar

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

Scanning multiple pages as one document

When I was using Windows XP with my HP 3055 I could scan multiple pages as one document. Since I have upgraded to Windows 7 Pro, when I scan, each page is scanned as a new document. Also, I no longer have the option to scan the document as a pdf. The pdf problem is not that important, but it is very important to be able to scan multiple pages as one document. How can I make my HP scan all pages as one document?
Thank you.

Hi @flyrod40 ,
I see that you would like to be able to scan multiple pages to one file. I would be happy to help you.
What printer do you have? Deskjet 3050 or the Laserjet 3050.
How Do I Find My Model Number or Product Number?
If you are using the HP Scan Software, open the software, select the link for Advanced Settings, then click on the File tab and put a check mark in Create a separate file for each scanned page. This will allow you to scan multiple pages to one file.
Here are the screen shots.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

Multiple IP Addres one NIC Card..

Similar Messages

Maybe you are looking for