Multiple JComboxes in Jtable. Select 1, rebuild the other

I have two JComboboxes in a Jtable row. When I make a selection in 1 of them, I want to rebuild the other and automatically select an item in it. I don't have any problem putting JComboboxes in the table but I can't seem to edit the second one when I select an item in the first one.
Thanks, Larry

table.setCellSelectionEnabled(true);
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
DefaultListSelectionModel model =
(DefaultListSelectionModel)table.getColumnModel().getSelectionModel();
model.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);

Similar Messages

How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

My carrier is Sprint. But I actually have checked with others and theirs work fine.

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

Is there a way to select multiple sequences and batch export them using the same settings in CS6?

I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6. We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time.
so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each.... Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos. I thought i would be able to send all of the sequences to Adobe Media Encoder, but i dont see that option either.
Any suggestions/
thanks!

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

How to select rows in the inner JTable rendered in an outer JTable cell

I have wrriten the following code for creating cell specific renderer - JTable rendered in a cell of a JTable.
table=new JTable(data,columnNames)
public TableCellRenderer getCellRenderer(int row, int column)
if ((row == 0) && (column == 0))
return new ColorRenderer();
else if((row == 1) && (column == 0))
return new ColorRenderer1();
else
return super.getCellRenderer(row, column);
ColorRenderer and ColorRenderer1 are two inner classes, which implement TableCellRenderer to draw inner JTable on the outer JTable cell, having 2 rows and 1 column each.
Now what is happening the above code keeps executing continously, that is the classes are being initialised continously, inner JTables are rendered (drawn) continously, and this makes the application slow after some time. It throws java.lang.OutOfMemoryException.
WHY IS IT SO??? I can't understand where's the bug..
Any advice please???
Moreover i want selections in inner tables and not on outer table, how can this be possible.
I am working on this since a long time but have not yet found a way out...

With your help i have overcome the problem of continous repeatition.
The major problem which I am facing is, in selecting rows in the inner rendered JTables.
I have added listener on outer JTable which select rows on the outer JTable, hence the complete inner JTable which being treated as a row, gets selected.
The thing is i need to select the rows of inner rendered JTables,not the outer JTable.
How to go about it??
I have even added listener to inner rendered JTables, but only first row of every table gets selected.
Please help....
Thanks in advance.

Mail with multiple gmail accounts sending messages from wrong email, other than the one i select

mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
in preferences, i have "send new messages from : account of selected mailbox"

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

JTable: How to reference the selected row during a drag?

I am implementing Drag and Drop on the rows of a JTable.
I want to change the background colour of each successive JTable row ("highlight" the row) as another row is dragged over it (I already have similar functionality implemented in a custom TableCellRenderer, but the Drag and Drop code knocks it out) .
I have run into a problem: All of the JTable methods refer to the rows as ints--0, 1, 2, etc.
Here is my approach:
I get the reference to the row by using:
     "int dragEnteredRow = table.rowAtPoint( e.getPoint() ); "
With the intention to use the variable dragEnteredRow to change each row's foreground colour:
     "dragEnteredRow.setForeground( selected ); "
That gives me an error message from the compiler:
"... Can't invoke a method on a int.
     dragEnteredRow.setBackground( Color.yellow ); ... "
Here is some more of the code (it implements the Macintosh Drag and Drop API):
[javacode]
"     public boolean dragMoved( DragEvent e ) {
     dragEntered( e );
          return true;
     public boolean dragEntered( DragEvent e ) {
     int dragEnteredRow = table.rowAtPoint( e.getPoint() );
          dragEnteredRow.setBackground( Color.yellow ); // These two lines fail at the compiler
//     table.rowAtPoint( e.getPoint() ).setBackground( Color.yellow );
          if ( dragEnteredRow == -1 ) {;
               System.out.println( "out of bounds !!" );
          } else {
               System.out.println( "Drag Entered at : Row" + dragEnteredRow ); // This test code works
               System.out.println( "" );
               return true;
[javacode]
My Question: What is the proper approach to solving this problem?
Many thanks in advance for a solution.


the method rowAtPoint(e.getPoint()) returns an integer with the index of the row at point e, and not the instance of the row.
You have to use this integer to reference the row through a method like getValueAt(row int,col int) of the DefaultTableModel
Hope this helps

How do I clear out multiple entries for a persons name in the Faces selection?

Can I get some help clearing up multiple entries in the "Click to Name" dialog box in iPhone 9.6?
Here's the behavior I'm seeing:
When I try to assign a name to a Face by clicking the "Click to Name" option, I start typing in my son's name and iPhone is showing me 15 entries for his name.
Of the 15 options, only 1 of them shows a mini-thumbnail photo of him, and a different one suggests that it's from the Contacts app, but the rest of them are blank.
This behavior is not happening for any of the other Faces in the library.
In terms of troubleshooting, I've opened Apple Contacts and ensured there is only 1 contact record for him (there are 2 email address listed). I've selected Library > Faces > And I see one polaroid image in the list for my son. In the past if there were multiple listings here I've seen similar results. I'm not sure what else to try.
What causes these to be duplicated?

I spoke with Apple Support today and they provided a workaround:
I had 7 entries for a person.
Find untagged photo with person in it. Select Entry 1
Find untagged photo with person in it. Select Entry 2
Repeat until you have at least 1 photo tagged with each of the 7 entries
Now go back to Faces and you'll see 7 polaroids listed.
Select each of them and merge them.
Problem solved.

Multiple row selection capability in the table

Hi
I have a group with table layout style and I want to set the rowSelection property of the generated table to "multiple" but it seems that there is no way to do that from JHs unless using the group as LOV, which is not desired for me. Here is the code which sets this property in tableGroup.vm :
#if (! ($JHS.current.group.useAsLov && $JHS.current.group.multiSelect))
selectionListener="#{#BINDINGS_TABLE().collectionModel.makeCurrent}"
rowSelection="single"
#if( ! $JHS.current.group.useAsLov )
selectedRowKeys="#{#TABLE_BEAN().selectedRow}"
#end
#else
rowSelection="multiple"
selectedRowKeys="#{#LOV_PAGE_BEAN().selectedRowKeySet}"
selectionListener="#{#LOV_PAGE_BEAN().selectionListener}"
#end
Is there any reason to not allowing to have multiple row selection capability in the table when it is not in LOV mode?
Thanks
Ferez

Ferez,
No, but if you want to have multiple selection, there is typical a custom action you want to apply to the selected rows, which cannot be defined in the Jheadstart Application Definition editor.
However, it is perfectly fine to use a custom tableGroup.vm template and enable multi-selection.
Steven Davelaar,
JHeadstart team.

How will i display the multiple select ids in the dashboard ?

I have a form where there is a multiple select. When the form is submit, the ids for the multiple select is stored in the database as concatenate. For example, multiple select : 3,9,5,1.
The ids of the multiple select is found in a table TABLE1 and the insertion is done in another table TABLE2.
Now I have to display them in a dashboard.
My question is how will i display the multiple select ids in the dashboard ?
I have to do an innerjoin with TABLE1 to retrieve the names of the multiple select ids. I don't know how to do it because the column name for multiple select in TABLE2 is of type text and the column id in TABLE1 is of type int.
Please help me solve this problem.
Thanks in advance

One general advice is, never store comma-delimited lists in the database. In fact, the reason is to avoid problems like the one you now face.
The major suggestion here is to re-design your database. Make sure each selected item (for example 3, 9, 5 or 1) is stored in its own row.
To solve the problem as it now stands, you could do something like
<cfquery>
select myItems
from table2
where id in (select id from table 1 where ...etc.)
</cfquery>
Then use ColdFusion's list functions to do what your dashboard requires you to do.

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Multiple JComboxes in Jtable. Select 1, rebuild the other

Similar Messages

Maybe you are looking for