Multiple Key figure in a single column of a query

Hi,
Is it possible to use muliple key figure like Amount and Qty field together in a column of a query?
Please advise,
Best Regards,
UR

Hi,
You will be able to do it with the help of cell definitions.
Say,you have a structure in Rows :
A
B
For A ..in corresponding column cell,use cell definition with KF1
For B.....in corresponding column cell,use cell definition with KF2
this way,you will be able to see both in one column
I m not sure how much it is relavant to your requirement.But this is one way of gettin it

Similar Messages

  • Key Figures in Row an Column section for Query...

    Hi,
    Is there is any way I can keep one of my keyfigure in Row section and rest in Column section of my BW query.
    Vishal

    Hi Vishal,
    What exactly do you need to do with one KF in the row and rest in the columns...that is no tpossible in BW (doesn't make much sense with the data as well). With the table layout you can just inter-arrange the KF and chars as columns, but you lose some navigation options.
    Hope this helps...

  • Combine multiple key figures in single key figure

    Hi,
    We have a requirement where we need to put multiple key figures into a single key figure
    For example source DSO is as follows (+ Unit object):
    Region    |   Date           |    Amount  |    Quantity
    Asia        |  01-01-2008  |    100        |    1000
    Eurpoe    |  02-02-2008  |     200       |     2000
    In Target DSO / Cube, the data must appear like this (no Unit Object)
    Region    |   Date            |  Type        |    Value
    Asia       |   01-01-2008   |   Amount   |    100
    Asia       |   01-01-2008   |   Quantity  |    1000
    Eurpoe   |   02-02-2008   |   Amount   |     200
    Eurpoe   |   02-02-2008   |   Quantity  |     2000
    How do we achieve this?
    Regards,
    Nikhil

    Hi
    Write a strart routine that maps Type ->Amount and Quantity,Value -> Kf of Amount or Quantity
    Put these chars into Key fields in target DSO = Region | Date | Type ,that will assure unique entries
    Bye

  • Multiple Key Figures and SINGEDATA

    Hi Experts,
    There are different Key Figures in BI like Amount, Quantity, Number, Integer, Date, Time, and the associated Unit. Whereas, in BPC there is only one type of object is used for recording quantitative values for transaction in BPC, that is SINGEDDATA. This object is equivalent to a Key Figure in SAP NetWeaver BI. So, while extracting data from BI to BPC, there are multiple Key Figures in BI, then how to take these multiple Key Figures in BPC? Do we need to take multiple SINGEDDATA?
    Appreciate your help.
    Thanks

    Hello Qakbar -
    The typical practice is to map each BW key figure to a combination of SIGNDATA and another dimension, such as ACCOUNT (or any combination of one or more dimensions).  BPC is a true account based data model (only one key figure).
    You can use BW transformations along with Rule Groups to define how each multiple key figure based BW record can be broken into separate single key figure records.  These records can be stored in a BW staging cube for easy import into BPC upon demand. 
    Alternatively, you could use the BPC transformation command, MVAL, to allow loading of multiple Keyfigure BW records directly into BPC.
    Regards,
    Sheldon

  • Time Buckets with multiple Key Figures in Each

    Hello Experts,
    I have seen documents creation of ageing buckets and calculations but not seen any document with ageing bucket having multiple Key Figures part of it.
    User's have used Excel to create Bucket header and using V and H lookups they are populating data in to those columns. Is there a way we can achieve this in Bex Designer? Below is what needed on report which would give user's overview of Current Week, Previous Week, Last 4 weeks and Last 13 weeks. I have attached Snapshot for better Understanding
    From Excel--->
    Target
    Current Week
    Last 4 Weeks
    Utilization
    Billable
    Non-billable
    Non Work
    Utilization
    Billable
    Non-billable
    Non Work
    Utilization
    Billable
    Non-billable
    Non Work
    Thanks
    Sam

    Hi Sam
    If week is your time period analysis then create a structure in columns, above your key figures, based on week selections variable.
    pic example
    I don't think that you will find such a document.
    Thank you
    Yiannis

  • Key figures in row and column.

    Dear all,
    I have a requirement in my BEx query to have to key figures in both the row and column. This is the scenario, I have a formula defined in the row which does a total up and the user would like to see this key figure formula in the column while still maintaining all other key figures in the row. How can this be done?
    It seems that once I have a key figure in either the column or row I can only use either one- not both at the same time.
    Thanks in advance and points will be awarded.

    Hi,
    You can use KF in either in Row or Column.It's not possible to use in both in rows and columns.
    Regards,
    Jayapal

  • Multiple key figures in a report painter or writer

    I would like to bring GL account balances  in the form of a P&L and also bring statistical key figues. I need to perform a formula of dividing the dollar value by the SKF. Is this achievable? The column in the painter does not permit more than one key figure type, currently I have object currency.

    Yes it is possible.  If I understand your question correctly, I think you want to define statistical key figures within the rows of a report and have their corresponding key figure in the same column as the amounts for the G/L accounts.  To do so requires that you create a new section within the report (Edit > Sections > New Sections) which can reference a different key figure than the object currency used by the G/L accounts.  In the new section, or in its own section, you can then create a row formula which combines the amounts and key figures.
    Best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • Key figures in rows and columns at same time

    Dear experts,
    I'm making a report in HR in Bex query Designer 7.0.
    I have most of my key figures in the row, but for my structure in my row, i need a key figure in the column. As you already might know, you cannot do this just by drag and drop. But i was wondering if there's a way to do this anyway? and if so, how?
    thanks in advance,
    Jessica

    I have in the row
    a structure:
    exits - end of contract
    exits - voluntary
    exits - unvoluntary
    key figures
    And in the column i need the key figure: number of actions
    -> this tells me how many of the sort exit their are in the specified period.
    And the other keyfigures need to be in the row.
    So i don't know how to solve this
    Edited by: Jessica on Mar 19, 2008 12:07 PM

  • Model multiple key figures of BI cube to BPC

    Hi Experts,Probably a good way of having multiple Key figure values from BI to BPC is to convert it into a account based model (create a dimension and have the key figures as dimension members).I have this scenraio where we are using COPA (costing based) for BPC mgmt consol.This costing based COPA cube in BI has around 120 Key figures.Pls advice on the best way to medel this scnerio in BPC where i would probably need most of those Kf's.I am also looking at how i could reduce separate transformation files/mappings from BI to BPC also on the same..
    Many thanks
    savvvy

    Hi ,
    Thank you Pravin and Ajay for your valuable suggestions and time.what i would like to clarify is on the transformations.Let us say i have my BI cube as costing based itself and this i need to map to BPC dimension.
    BI structure- char1 ,char 2,char 3 ,KF1(value field 1),KF2(value field 2),KF3(valuefield3),KF4....
    In BPC ,lets say we have  a separate dimension (i guess this should be of account type or probably user defined one)  which would have dimension members as KF1,KF2,KF3,KF4....
    Now how would i do the mapping/transformations from BI to BPC? would i need to have 4different transformation files (assuming i have 4 KF's in my BI cube) for each KF & char combination and thus to load data also many times.
    How to achieve modelling side of this situation.any suggestions on this would be greatly appreciated.
    many thanks
    savvvy

  • Converting key figures from rows to column using DSO and start routine

    Hi SDNer:
    I need some help to convert key figures from rows to column.
    The source is DSO 1 and I am thinking about writing ABAP in the start routine to do the conversion. The target is DSO2.
    Below is the  more detail information with example. Basically, for each record in DSO 1 I need to create 3 records (because there are 3 KF's) and output to DSO2.
    I would really appreciate some help on this.Thank you.
    Tony
    DSO 1 data format (SOURCE)
    Period   ID   KF1  KF2  KF3
    200702 100  300  200   750
    Output to DSO 2 (TARGET)
    Period   ID    KF  LABEL
    200702 100  300  KF1
    200702 100  200  KF2
    200702 100  750  KF3

    This is the code in BI 7.0.
    u need to put a field "Label" in DSO1. u dont need to populate this in DSO1 but it helps the code to populate the field in DSO2.
    DATA: wa_result TYPE _ty_s_sc_1,
    t_result TYPE STANDARD TABLE OF _ty_s_sc_1.
    DATA:counter(2) TYPE n.
    LOOP AT SOURCE_PACKAGE INTO wa_result.
    counter =0.
    while counter < 3 .
    wa_result- Period = wa_result-Period.
    wa_result- ID = wa_result-ID.
    if counter  = 0.
    wa_result- KF1 = wa_result-KF1.
    wa_result- Label = 'KF1'.
    elseif counter = 1.
    wa_result- KF1 = wa_result-KF2.
    wa_result- Label = 'KF2'.
    else.
    wa_result- KF1 = wa_result-KF3.
    wa_result- Label = 'KF3'.
    endif.
    APPEND wa_result TO t_result.
    counter = counter+1.
    endwhile.
    endloop.
    CLEAR: SOURCE_PACKAGE,wa_result.
    LOOP AT t_result INTO wa_result.
    APPEND wa_result TO SOURCE_PACKAGE.
    ENDLOOP.

  • Multiple Display Types in a single column

    I have a situation where I have to display a bunch of attributes for a customer. Each attribute can have a different type, Text, Dropdown, Date etc and that information is stored in a table.
    I was able to use apex_item to display the different display types based on the type of attribute.
    So the layout of the form has 2 columns, column 1 is the name of the attribute and column 2 is the value of the attribute (displayed as the various types of date, text, dropdown etc) However, I am having an issue with the Date popups. When I select a date it always goes into whatever date is listed first. No sorting is going on in the select or the report.
    I'm guessing my issue has to do with displaying different display types in the same column? If that is true, how should I change my approach to this problem? I want all the attributes on a single page, so is my only option to have each attribute in a different region?
    Thanks,
    -- Johnnie

    Denes,
    OK thanks for the heads up, let me try to clarify.
    My problem is that I have multiple date popups on the same form. When I pick a date for any of the date popups, it always updates the first date popup field on the form. I stated there was no sorting at all because this thread indicated that sorting could cause this issue:
    DATE_POPUP
    Another hit for this issue was here:
    Re: HTMLDB_ITME.DATE_POPUP problems
    This suggested that having multiple data types in the same column (which is what I am doing) is not supported, but this is an old thread.
    My form will be a manual tabular form. I need to display a list of attributes, however some are freeform text, some are SQL LOV dropdowns, and some are date popups. Right now they are all displayed in the same column. Could this be causing my date popup issue? If so what alternatives do I have?
    Screenshot of my form here: http://johnniebillings.googlepages.com/outlook.jpg
    Hope that clears up the issue I am having.
    -- Johnnie

  • Using sql load insert multiple fields data into a single column in database

    Hi ,
    I have my log file in sun OS box something like this
    =======
    (07/29/2009 00:02:24.467) 367518 (07/29/2009 00:02:26.214) 949384011
    (07/29/2009 00:02:26.236) 3675 (07/29/2009 00:02:28.207) 949395117
    (07/29/2009 00:02:28.240) 337710 (07/29/2009 00:02:30.621) 949400864
    =============
    I am trying to insert the data into oracle data base as follows.
    =============================
    column1 : (07/29/2009 00:02:24.467)
    column2 : 367518
    column3 : (07/29/2009 00:02:26.214)
    column4 : 949384011
    ===========================
    Can anyone help me with the control file format?
    someone suggested me the code below.
    ==========
    LOAD DATA
    INFILE 'D:\work\load.txt'
    INTO TABLE sample
    (col1 POSITION(02:24) char,
    col2 POSITION(27:32) INTEGER EXTERNAL,
    col3 POSITION(35:57) CHAR,
    col4 POSITION(60:68) INTEGER EXTERNAL
    ===========
    but this works only for the fixed length data? Please help

    user11744904 wrote:
    Hi ,
    I have my log file in sun OS box something like this
    =======
    (07/29/2009 00:02:24.467) 367518 (07/29/2009 00:02:26.214) 949384011
    (07/29/2009 00:02:26.236) 3675 (07/29/2009 00:02:28.207) 949395117
    (07/29/2009 00:02:28.240) 337710 (07/29/2009 00:02:30.621) 949400864
    =============
    I am trying to insert the data into oracle data base as follows.
    =============================
    column1 : (07/29/2009 00:02:24.467)
    column2 : 367518
    column3 : (07/29/2009 00:02:26.214)
    column4 : 949384011
    ===========================
    Can anyone help me with the control file format?
    someone suggested me the code below.
    ==========
    LOAD DATA
    INFILE 'D:\work\load.txt'
    INTO TABLE sample
    (col1 POSITION(02:24) char,
    col2 POSITION(27:32) INTEGER EXTERNAL,
    col3 POSITION(35:57) CHAR,
    col4 POSITION(60:68) INTEGER EXTERNAL
    ===========
    but this works only for the fixed length data? Please helpIs the requirement to load all data in a single column or multiple columns? The thread subject and body are conflicting.

  • Two Key figures in Report Painter column?

    Dear Experts,
    We have some company codes with group currency setup and others without this. I have created a report painter report with table GLT0. I want ability to produce a consolidated report for all the company codes.
    However, when I define the report column, I can only select one basic key figure in the column viz. HSL - Local currency or KSL - Group currency for example. In my report I have selected HSL since majority of the company codes report on local currency.
    Is there a way that the program can be told to change the basic key figure during report execution to KSL - Grp Curr for select company codes only?
    Or is there a way to have two basic key figures in a report painter column? I know I sound foolish on this question. But still I ask this.
    Any thoughts, pls share with me. Thanks.
    Vishal Thakur

    You are right Sue. But unfortunately way back in the 90's when our company implemented SAP, those company codes did not activate the 2nd LC as USD. Thus, these companies only have figures updated in the 1st LC which is USD.
    Subsequently, we acquired new companies overseas and then for these co's we switched on the 2nd LC as USD with the 1st LC as the country specific currency.
    Vishal.

  • Order of update rules execution of multiple key figures

    Can anyone explain the order in which update rules execute if I have 10 key figures and defined one update routine for each key figure?

    Hello GKR
    This is applicable for yupdate rule as well as transfer rule
    start routine executes first ( update rule/transfer routine)
    In update rule the rule which u have defined first, executes first...same in transfer rule..the rule which u define first in transfer rule window executes first...
    Thanks
    Tripple k

  • Multiple key items for a single data item?

    hi all. In my application multiple key items may have the same data item, such as:
    key data
    1 abcd
    1 abcd
    1 abcd
    2 efg
    2 efg
    but it may lead to a lot of duplicate storage spaces. I can use two dbs by giving each data item an ID, just like:
    db1
    key data
    1 1
    1 1
    1 1
    2 2
    2 2
    db2
    key data
    1 abcd
    2 efg
    is there any other simple solutions? thanks in advance

    Hello,
    This sounds like a data modeling question. I think your solution is reasonable, though you'll get a lot of good ideas and info if you read up on normalization for relational schemas - there's a ton of literature out there. Just do a search for "database normalization".
    Normalization is intended to eliminate redundancy and also avoid various update anomalies.
    Warm regards.
    ashok

Maybe you are looking for