Multiple listening sites

I have a G4 hard wired to an Airport Base station. I have a Powerbook G4 that utilizes the airport base station to connect to the internet, IT IS NOT HARDWIRED. I also have an airport express in a seperate room of the house.
When I want to listen to tunes I use the Powerbook to "send" the music to the airport express, HOWEVER, I can't listen to stations that are streaming on iTunes because I have to switch to the Airport Express which disconnects me from the base station and also I can't listen to the tunes on the Powerbook.
I'm told with the latest update to iTunes, which I have installed (iTunes 7) I'm led to believe there is a way to do this. Can anyone explain how?

Maybe this is all my fault. As I reviewed my very first message I should have stated that "I have a G4 Tower hard wired to an Airport Extreme NOT an Airport Express Base Station" and that "I have a Powerbook G4 that utilizes the airport base station to connect to the internet, IT IS NOT HARDWIRED", I receive the signal wirelessly.
No fault at all, you explained it perfectly ... and my instructions would still be appropriate. With your current network configuration, you will want to reconfigure the AirPort Express Base Station (AX) as a wireless client to the wireless network being provided by your AirPort Extreme Base Station (AEBS).
Also when I first open the Airport Admin Utility it only shows the BASE Station. Should it also be showing the Airport Express?
Yes, it should show both. I suggest during the set up phase to bring the AX within near proximity of the AEBS, so that the utility has a better "chance" of "seeing" them both. Remember to "factory default" reset the AX. If you are still not seeing both in the utility, just connect the AX directly, using an Ethernet cable, to the LAN port of the AEBS during setup. You definitely should see both now. Once configured, you can go ahead and move the AX to its final desired location.

Similar Messages

Single SSL Web Listener for hosting multiple web sites

Hi All,
We are currently hosting multiple websites with Single HTTP Web Listener .. As of now it's everything is working fine..
Now we have planned to have SSL for the hosted sites
Each hosting site will have different SSL Certificates and i am little confused to use Single SSL Web Listener to host multiple web Sites...
Can any one guide me to use Singel SSL Listener for using all hosted sites..
We are having TMG on DMZ Network on Single Nic..
KJSUBBU

Hi,
it is no problem to host multiple SSL websites with only one IP address / certificate on the TMG Server. Only the authentication options for the published websites must be unique, because you cannot use multiple authentication options in one Listener
TMG Server uses HTTPS to HTTPS bridging, so you can use Host header and more to distinguish between the different internal websites:
http://technet.microsoft.com/en-us/library/cc995178.aspx
Regarding the SSL certificate on the internal webservers. TMG must trust the issuing certificate authority which issued certificates for these websites and the name you used to connect from the TMG Server to the internal webserver must part of the CN (Common
Name) or SAN (Subject Alternate Name) on the certificates of the webservers
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Hosting Multiple SSL Sites on Separate IP Addresses

Hosting Multiple SSL Sites on Separate IP Addresses
I currently have a web server (XServe) hosting a number of different sites from its main IP address on port 80 using Apache 1.3. This has been working great, the ServerAdmin GUI has been pretty good about creating the appropriate Apache configs, and everybody is happy.
I have one particular site that I want to use SSL with so I decided to purchase a cert (from GoDaddy). Since I have one other cert on the server assigned to the main server IP, I understand that the appropriate way to setup additional SSL certificates is to bind another IP address to the XServe and use that IP. I was unable to use ServerAdmin to install my new certificate (not surprisingly) probably since it is a chain certificate, however I have been able to do it by hand and it seems to be working as intended…mostly.
This is where my problem begins. The site that I wanted to add SSL to is currently hosted on the main IP address (x.x.x.173:80) and the SSL certificate is working on the newly bound IP address (x.x.x.178:443). Fundamentally it would seem appropriate to change the IP address of the non-SSL site to match the new IP, except on port 80 – So I can achieve a seamless blend between standard and SSL (when necessary). The problem is that I can’t get Apache to work this way. Maybe I am missing a step, or overlooking something.
Excerpt from current, working (non-SSL) config: (Names have been changed to protect the innocent.)
<VirtualHost x.x.x.173:80>
ServerName www.site.com
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/Documents/www.site.com"
</VirtualHost>
Excerpt from current, working (SSL) config:
<VirtualHost x.x.x.178:443>
ServerName www.site.com
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/Documents/www.site.com"
</VirtualHost>
changing the first entry’s ip address to match the second one causes the site to be unresponsive (using the IP address to point the browser to the site) but the SSL version keeps working. Any suggestions would be greatly appreciated.
Thanks,
Jake
PowerBook, XServe G5 Mac OS X (10.4.6)

Thanks for your reply Roger, here are the results that you’ve requested:
I deleted a few lines that were redundant and unrelated (no errors)
Results of apachectl configtest:
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/0012x.x.x.173_80www.site.com.conf
Processing config file: /etc/httpd/sites/0016x.x.x.178_443www.site.com.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Thu Apr 6 09:06:27 2006] [warn] module mod_php4.c is already added, skipping
Syntax OK
Results from netstat -a -n | egrep 178:
tcp4 0 0 x.x.x.178.53 . LISTEN
udp4 0 0 x.x.x.178.123 .
udp4 0 0 x.x.x.178.53 .
Results from tail -f /var/log/httpd/error_log
/etc/httpd/sites/0012x.x.x.173_80www.site.com.conf
Processing gonfig file:
/etc/httpd/sites/0016x.x.x.178_443www.site.com.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Thu Apr 6 09:21:10 2006] [warn] module mod_php4.c is already added, skipping
[Thu Apr 6 09:21:10 2006] [notice] Apache/1.3.33 (Darwin) PHP/4.3.11 mod_ssl/2.8.24 OpenSSL/0.9.7i configured -- resuming normal operations
[Thu Apr 6 09:21:10 2006] [notice] Accept mutex: flock (Default: flock)
When I try to hit the site on port 80 http://x.x.x.178 there are no results, https://x.x.x.178 works great.
Thanks again for your help, hopefully this can shed some light on my problem,
Jake
PowerBook, XServe G5 Mac OS X (10.4.6)
PowerBook Mac OS X (10.4.6)

MULTIPLE LISTENER의 LOAD BALANCING 및 2개의 NETWORK CARD 사용 시 SETUP

제품 : SQL*NET
작성날짜 : 1997-11-24
MULTIPLE LISTENER의 LOAD BALANCING 및 2개의 NETWORK CARD 사용 시 SETUP
=====================================================================
Oracle V7.3의 SQL*Net 2.3의 새로운 기능으로 여러 개의 Listener를 띄우면서
상호 Load Balancing을 유지하는 기능을 소개하고자 한다.
Load Balancing 기능을 이용하여 각각의 Listener와 Oracle Instance 간의
Overloading을 줄일 수 있다.
다음의 예는 하나의 장비 내에 2개의 Network Card가 있을 경우에 대해 setup을
하는 방법이며 만일 하나의 Network Card가 있을 경우는 Host는 하나만 지정
하면 된다.
1. init<SID>.ora file을 지정할 Parameter
MTS_MULTIPLE_LISTENERS=TRUE
COMPATIBLE=7.3.2.0
2. 예를 들어 Listener를 2개 사용하는 경우라면 initSID.ora에
mts_dispatchers="tcp,10"
mts_max_dispatchers=20
mts_servers=20
mts_max_servers=40
mts_service=ORA73
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1621)(host=152.69.30.100))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1622)(host=152.69.30.100))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1623)(host=152.69.30.102))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1624)(host=152.69.30.102))
3. listener.ora file에 설정되는 내용은
LISTENER1 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.100)
(PORT=1621)
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.100)
(PORT=1622)
LISTENER2 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.102)
(PORT=1623)
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.102)
(PORT=1624)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORA73)
(ORACLE_HOME=/oracle2/ora73/app/oracle/product/7.3.2)
SID_LIST_LISTENER2 =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORA73)
(ORACLE_HOME=/oracle2/ora73/app/oracle/product/7.3.2)
STARTUP_WAIT_TIME_LISTENER1 = 0
STARTUP_WAIT_TIME_LISTENER2 = 0
CONNECT_TIMEOUT_LISTENER1 = 0
CONNECT_TIMEOUT_LISTENER2 = 0
4. tnsnames.ora file에 설정되는 내용들
* 다수의 port에 Random하게 접속하는 경우
RANDOM =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.100)
(Port = 1621)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.100)
(Port = 1622)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.102)
(Port = 1623)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.102)
(Port = 1624)
(CONNECT_DATA =
(SID = ORA73)
* 개개의 Port로 접속하는 경우
TORA1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1621)
(CONNECT_DATA =
(SID = ORA73)
TORA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1622)
(CONNECT_DATA =
(SID = ORA73)
TORA3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1623)
(CONNECT_DATA =
(SID = ORA73)
TORA4 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1624)
(CONNECT_DATA =
(SID = ORA73)
5. 각각의 Listener를 띄우는 방법
$ lsnrctl start LISTENER1
$ lsnrctl start LISTENER2

Configuring AD Sites and Services best practice for multiple office site ?

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
I'd like to know more about the number and the direction of the connection between Domain Controllers in one site to the Data Center and vice versa.
Thanks.
/* Server Support Specialist */

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
This series can be useful:
Active Directory Structure Guidelines – Part 1
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Database Design for Multiple function site

Hi
I am working on one project which involve multiple function
site, such as
Company Product Catelog, Customer Support Forum, Document
Exchange Engine and
etc...
Normally we will combine ALL TABLEs into one DATABASE.
My question are:
1) Is my break them to individual DATABASE, will it perform
better?
Means Product Catelog and Forum will have different
DATABASE, but they
will using the same DOMAIN NAME.
2) I am worried about the break down and corruption of
DATABASE, so I have the
idea to separate them out. Are my idea correct or wrong?
3) I am seeking for better DATABASE DESIGN, because I know
the database will
become huge in future. I request for your idea and opinion.
Thank you very much.

Creating views: not an option I think. It would involve a lot of programming with 'instead of' triggers etc.
Seperate databases: a good way if the locations are completely independant and do not share information. This involves more DBA work.
Separate schema's in one database: this would make public synonyms impossible, and is probably not a good option.
Adding a location id to tables: the best way I think, and flexible. You can easily add another location, and locations can easily share information.

Do I need multiple primary sites? Some design questions..

I have about a thousand users & devices, across two sites. Setting up SCCM 2012 R2 and wondering if I need to have multiple primary sites?
From everything I've read so far, it seems that a single standalone site will handle tens of thousands of users/devices or some very large number, so I'm not sure if I'd ever need a secondary site or what it's function would be - failover, backup, or is
it just best practice to have different roles spread across multiple servers?
I was originally thinking of just doing a single primary site on a single server. But then I'm not sure if my DP should be separate.
Can someone point me the the right direction to a high level planning document or blog?
Thanks
Nathan

How many clients are there in total? How many at each location? What's the WAN speed in between?
Multiple primaries are only needed for scale out purposes (>100k clients)!
Torsten Meringer | http://www.mssccmfaq.de
About 500 at each, T1 speeds connect the sites, so I want to enable software metering I think.
Also - if I have a single server with DP role installed, what kind of RAM/HD requirements are needed? I know this probably varies with the install/features, but are there any ballpark estimates/starting points posted? Sorry I know this is probably
on the MS site somewhere, the the volume of information is hard to weed through. Update, I found some good guidelines here:
http://myitforum.com/myitforumwp/2012/06/27/sccm-2012-site-hardware-requirements/
For 1000 or less users, is a single Gb NIC sufficient? Sounds like it might be? Also, when using a virtual machine, do you need to still somehow separate SQL logs & data from OS?
Update #2, looks like that above post answered that question too:
If you’re in a VM, it’s not sufficient to have a single VHD file, and having the roles split among 4 virtual drives inside that file. It’s not sufficient to have that single file on a shared set of remote disks. It’s not sufficient to have that
single file on a dedicated set of disks, regardless of the number and size of those disks. Any VM should be configured to only run the OS, and the 3 other spindles should be dedicated sets of disks, attached to the VM. Otherwise, it’s like painting
with watercolors in a hurricane…you’re spending a lot of time, looking creative, with zero value.
But I'll take any follow up comments or recommendations if you have them on proper VM setup.
Thanks
Nathan

Configuring multiple web sites in a single OC4J instance with 10g OEM

Hi There,
there doesn't seem to be a way of configuring multiple web sites within a single OC4J instance using the 10g Enterprise Manager Website, so can i assume that there's some performance related issues with doing this, or is it just a case of if you want multiple web sites, configure it manually?
We currently use 9iAS release 1 (which has been configured to use multiple web sites - with normally 1 j2ee app in each website - in a single OC4J clustered instance, using mod_proxy to forward the http requests onto oc4j), but we are looking to migrate to 10g very soon...
The initial configuration was done by an external company, so i'm not entirely sure of the reasons why it was chosen (perhaps so that if there was a problem with a single website, it wouldn't impact all our applications)..
Does anybody else currently use multiple *-web-site.xml's in a 9iAS release 2 or 10g in a production environment, and if so did you encounter any problems with the OEM website (assuming you configured them manually)?
Thanks in advance,
Andy

Hello,
Something like this:
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Restart the IIS admin service in services.msc
Thanks,
Simon Wu
TechNet Community Support

Sender from multiple ftp sites

Is it possible to configure a sender file communication channel where the file is picked up from any of three ftp locations? For example, if the client has say 3 factory locations and they want to maintain local ftp site to drop their files but if we were to process the files from a common interface, would it be possible to either
1) Configure multiple ftp sites as the sender location in one communication channel, so that the file is picked up regardless of which ftp it is placed on?
OR
2) Have one sender agreement where multiple sender communication channels can be specified so that the interface is triggered whenever the file is placed in any of the ftp locations (and hence any communication channel receives the message)

hi yea it is possible to provide multiple location from where a file could be picked up.
go to ur Sender communication channel and select the check box "advance selection for source file" and enter multiple location for ur file
so u requrie on one sender agreement for it
please have a look at this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/frameset.htm
hope this is useful to you.

IWeb 1.1(.1) and multiple Domain.sites

There are (still) a lot of references to Domain.sites resides in ~/Library/Application Support/iWeb folder, this is no longer true with iWeb 1.1(.1).
iWeb 1.1(.1) can handle multiple Domain.sites, and once you double click a Domain.sites outside of ~/Library/Application Support/iWeb folder, ~/Library/Application Support/iWeb folder is no longer needed (unless you double click the Domain.sites inside ~/Library/Application Support/iWeb folder, again).
Once you double click a Domain.sites outside of ~/Library/Application Support/iWeb folder, you can move iWeb folder out of ~/Library/Application Support folder, and iWeb WON'T create another ~/Library/Application Support/iWeb folder.
huh?

iWeb 1.1.x multiple domains handling is quite low
key, and for a good reason. Although, iWeb 1.1.x can
handle multiple Domain.sites, however, there is no
way (that I know of) to create a fresh Domain.sites
from iWeb.
Some one prove me wrong, please.
Hmmmmm, I AM able to create a new Domain.sites file using iWeb 1.1.1; see this Apple support article:
http://docs.info.apple.com/article.html?artnum=303670
I've got a number of different sites that I had been keeping in different folders in a new folder that I named "Sites" that I kept where the default Domain.sites file was stored, i.e.,
for "Site1": ~username/Library/Application Support/iWeb/Sites/Site1/Domain.sites
for "Site2": ~username/Library/Application Support/iWeb/Sites/Site2/Domain.sites
etc.
Prior to version 1.1.1, when I'd open one of the Domain.sites files, iWeb would automatically create a Domain.sites file in the ~username/Library/Application Support/iWeb folder, then when I was done making changes to that file, I'd have to copy it back into the subfolder. Now with version 1.1.1, iWeb does NOT create a new file but rather just uses the Domain.sites file from where it is opened and makes that the new default location. To create a new site, just move this folder containing the Domain.sites file that iWeb now uses as the default to a different location and start iWeb by clicking on the iWeb application: you'll then get a new site. If the last opened Domain.sites file was in the username/Library/Application Support/iWeb folder, then moved to a different location, and then you open iWeb by clicking on the iWeb application, you will be prompted to either "Quit", "Create Domain…", or "Choose Domain…"; click "Create Domain…" and you'll then be asked to choose a location for a new Domain file; select a new location then iWeb opens with a new site.
Hope I'm making sense.
Bob
20" iMac G5 Mac OS X (10.4.6) 1.8 GHz PowerPC G5; 1 GB RAM

Configure Enterprise Manager with multiple Listener

Configure Enterprise Manager with multiple Listener
I have created 2 listeners and connected my database with both the listeners. If I stop one listener then it automatically uses second listener vice versa. But facing problem in case of enterprise manager. If i stop first listener which is on 1521 port it is not connecting to another listener which is on 1522 port.
any help ?

Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
Sybrand Bakker
Senior Oracle DBA

Hosting multiple web sites usinf personal web sharing

would someone be kind enough to give me a guide to hosting MULTIPLE web sites on a Mac Mini
i have broadband connected to my router
my mac connects to my router with an ip address of 192.168.1.150
I have registered the domain names and want to forward them to the computer hosting the web sites
how can I get each domain name to point to each different web site on my computer

This is a topic you should post to an Apache discussion group being as though Apple's personal web sharing software is Apache.

Multiple Drupal sites on 1 Arch server

I have just posted this also on the wiki (https://wiki.archlinux.org/index.php/Talk:Drupal), not sure if that was a good idea but here is my problem:
I wish to install multiple Drupal sites on my server so I start by doing this:
pacman -S drupal
I create a database and "cp -rv /usr/share/webapps/drupal/* /srv/http/mysite"
Everything works at 127.0.0.1/mysite ! Nice. Now comes site number 2.
I create a second database and "cp -rv /usr/share/webapps/drupal/* /srv/http/mysite2"
And this site is my first site but just at the different (127.0.0.1/mysite2) location? I thought I had copied clean files into the directory?
When I download the base packages from the Drupal site, I do go into the installation but it complains: "The directory sites/default/files does not exist."
What am I missing? I feel it has something to do with this directory /var/lib/drupal/sites/default/
Last edited by teekert (2013-04-28 17:30:54)

Ok, I have solved this issue myself.
I specifically added each site location separately to "basedir" in "/etc/php/php.ini" (So not just /srv/http/ but both /srv/http/mysite and /srv/http/mysite2) and now it works. Before I just had the root of both directories added.
Hopefully someone finds this useful.

Multiple Web Sites on OS X Mavericks Server

I want to run multiple test web sites off my home Mac OS X Mavericks Server 10.9 can someone point me to a good "How to" on the specific of how to use the Server application to create and operate multiple web sites of a single Mavericks Server?
Example
MyServer.inno.com          10.0.2.5
Basic web is up and running....
I want to host four other web sites off the same machine for testing purposes how do I do that?
MyServer.inno.com          10.0.2.5
MyServer.web1.com          10.0.2.5
MyServer.web2.com          10.0.2.5
MyServer.web3.com          10.0.2.5
MyServer.web4.com          10.0.2.5
so if I go to the server and load
     MyServer.web1.com          10.0.2.5
it load a different web server.
My thought is to use virtual host how does Apple / Community recommend I set this up...
T.

Please do not squat in the "home.com" domain. If you're going to use a bogus domain, please use a bogus to-level domain such as server.home.jarvis — .jarvis is not currently a valid top-level domain, though that might change with the way ICANN has been bringing many new top-levels online, so a real registration is safer here.
Peter Jarvis wrote:
Assumptions:
     1. The Server is not intended to be publicly accessable from the Internet
How will it be accessed? Entirely privately? No external access? OK.
     2. Private Network - 10.0.1.X
I'd probably pick something a little further into 10, such as 10.8 or 10.10, or 10.20.1.x — if you're ever using a VPN, it's best to use a weirder subnet, and I've worked with several folks that have 10.0.1.0/24 subnets.
     3. DHCP Reservation for the Mac Server - 10.0.1.2.
I usually prefer keep the server and the other fixed-address hosts outside the DHCP pool.
     4. Server Domain name MacServer.home.com
Are you the registrant for the home.com domain? (I'd tend to doubt that, and would therefore suggest use of a real and registered domain or subdomain that you have permission to use or (less desirably) use a bogus top-level domain.)
     5. Example Web Site http:www.rouxacademy.com to also run off the same server...
Is that going to be public?
Prequisites:
     1. Static Server IP Address / DHCP Reserved IP Address against MAC Address
     2. DNS Service Configured and Running
     3. Web Service Configured and Running
     4. Example Web Site http:www.rouxacademy.com
     5. You have a basic website (with mysql) files available
               Directory roux_academy (Contains Basic Web SIte files etc)
OK.
Steps:
     1. Static Server IP Address / DHCP Reserved IP Address against MAC Address
The Airport Airport allows you to Reserve and IP address against a MAC (Media Access Control) physicall address of Server Ethernet Card. You can do this or have the Airport allocated DHCP address from 10.0.1.50 and above and statically allocate the server address of the machine.
I'd leave the server out of the address pool. So long as the pool and all static IP hosts are in the same block (usually a 255.255.255.0 or /24 subnet) it'll all work, and you won't need to entangle the OS X Server with the DHCP server.
     2. DNS Service Configured and Running
Install Mavricks, install OS X Server application, launch server app...
Go to DNS tab, define a new host name MacServer.home.com and associate with 10.0.1.2 IP Addresss
Start DNS Service...
Note: DO not publish DNS service via airport to Internet...
Other than not squatting in that domain, yes. There's no reason to open TCP or UDP port 53 inbound.
   3. Web Service Configured and Running
Go to Web Sites tab...
Click + and create new web site entry
Domain Name:                http:www.rouxacademy.com
IP Address:                     Any
SSL:                               None
Store Files in:                /Volumes/dev/Library/Server/Web/Data/Sites/roux_academy
Who can access:          Anyone # I would restrict to a single user
Additional Domains:     rouxacademy.com
no http: prefix there, but yes.
If you're not exposing the server to the 'net (as mentioned above) there's probably no need to restrict. If you do need to restrict, you'll need to edit configuration files for Apache, or some other technique — maybe a VPN, if you're allowing (controlled, VPN-based) inbound access into your network.
Start Web Service...
     4. Back to DNS
Add host name....
www.rouxacademy.com / 10.0.1.2
# Do not create an MX record or publish DNS via airport...
AirPort does not know from MX records, and does not provide DNS services. AirPort will know about your local DNS server, since you are apparently using the AirPort for DHCP.
You can also add the DNS translation during step 2; Apache and DNS are not tightly linked here.
Launch Safari and type
     www.rouxacademy.com          - should launch web site...
     rouxacademy.com                   - should launch web site
Caveat: the Real rouxacademy.com will not be accesable from the server or local machines on 10.0.1.X network...
Ah, so there's a key detail — you're playing games and mimicking a real web site? OK.
The rouxacademy.com web site will be accessible from the server, as that'll (also) have the DNS translation (and remember the basis for virtual hosting is the client — the server in this case — has a translation for the host — the rouxacademy.com or www.rouxacademy.com domain in this case — and passes that string over the HTTP or HTTPS connection to the web server.   If you really want to keep the server from accessing this web site, then you'll have to push the local translation of that domain into the hosts file, or to a separate DNS server.
I'd try to avoid this configuration though, particularly as your references to MX earlier implies that this domain might be more active than just the web services discussed here — trying to run split-horizon DNS means you'll get what's internal and external somewhat tangled, and you'll have to keep mail — for instance — aimed outside and web services aimed internally. This is possible for many cases, but gets tricky.
Best to test the web site with a different domain name, and to use /-relative notation for accessing the files, or using the web content management system's configuration settings to control the "published" name of the site.

Collection Evaluation - multiple primary sites

Hello:
If I have a CAS and multiple primary sites and have a set of collections all created on the CAS, where is the collection evaluation done (I believe coll eval is done only on primary sites)? Is it done on each primary site independent of others?
And then they replicate to CAS and CAS sorts out possible conflicts/discrepancies?
So if I set the collection evaluation schedule, is that based on the local time of that particular primary site?
Thank you,
Mustafa Hamid, System Center Consultant

Thank you Jason,
I think I understand your comment about the managed systems - the systems that are assigned to that primary site. To take a simple case to help me understand - So if I have a device collection that has a query based on OU name=Dallas and that collection
evaluates on PS1 and also on PS2. Both will send their results to the CAS. Generally they should both evaluate to same result (maybe sometimes a bit different based on the DC they connect to). It seems in this case they are repeating the
same work since its all global data?
Thank you
Mustafa Hamid, System Center Consultant

Multiple listening sites

Similar Messages

Maybe you are looking for