Multiple Oracle Homes - Oracle Listener failes to start after installation

Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

hi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards

Similar Messages

  • Oracle AS - DB Console fails to start after AS install

    Hi,
    I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.

    hi,
    follow this metalink note you will find out the answer
         Troubleshooting Database Control Startup Issues
         Doc ID:      Note:549079.1
    Thanks,

  • Listener service not starting after installation (10g on WinXP)

    Hi!
    I installed 10.2.0.1 on a Windows XP machine, but for some reason the listener service does not start up. If I start the service from the Windows service control panel I get:
    The service "OracleOraDB10g_home1TNSListener" on "Local Computer" could not be started. Error 3: The system could not find the specified path."
    The path for the servicing exe is "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR", which is the correct path.
    Executing "lsnrctl status" I get:
    {code}
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 09:53:37
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
    TNS-12541: TNS: No Listener
    TNS-12560: TNS: Error with protocol adapter
    TNS-00511: No Listener
    32-bit Windows Error: 61: Unknown error
    {code}
    Executing "lsnrctl start" I get:
    {code}
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:02:10
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    tnslsnr is getting started: Please wait...
    Failed to start service, error 3.
    TNS-12560: TNS: Error with protocol adapter
    TNS-00530: Error with protocol adapter
    {code}
    When I open a another command shell and run the servicing exe "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR" directly and executing "lsnrctl status" I get:
    {code}
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:10:27
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
    STATUS des LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Startdatum 27-MAI-2009 10:10:17
    Uptime 0 Tage 0 Std. 0 Min. 10 Sek.
    Trace-Ebene off
    Sicherheit ON: Local OS Authentication
    SNMP OFF
    Parameterdatei des Listener G:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Log-Datei des Listener G:\oracle\product\10.2.0\db_1\network\log\listener.log
    Zusammenfassung Listening-Endpunkte...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpdeveloper)(PORT=1521)))
    Der Listener unterst³tzt keine Services
    Der Befehl wurde erfolgreich ausgef³hrt.
    {code}
    I can also successfully tnsping the listener.
    Any ideas why the listener service fails to start?
    Thanks a lot for your help,
    Marcus

    Hi Florian,
    my understanding was that on Windows ORACLE_HOME is stored in the registry.
    I have a correct path to my Oracle home directory under "HKLM\Software\Oracle\KEY_OraDB10g_home1\ORACLE_HOME".
    Following your suggestion, I added a Windows environment variable "ORACLE_HOME" that points to the Oracle home directory, rebooted and tried to start the service again, but nothing changed.
    Marcus

  • App Server Fails to Start after Installation

    Hi,
    I've spent a whole day struggling with this, looking through forum discussions and trying out every single suggestion I've come across in the forums. I'm running out of ideas now and really appreciate any help I can get with this problem.
    I'm trying to install SJSC2 (also tried with SJSC2u1 with the same outcome) on a new HP notebook (nw9440) running WinXP_sp2. I'm using the default installation done by HP.
    My installation path is C:\Java\SunCreator2 (C:\Java\SunCreator2_1 for update 1).
    After the installation the App server fails to start up and gives the below error in the server.log.
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d779c9d, pid=5368, tid=5760
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x99c9d]
    # An error report file with more information is saved as hs_err_pid5368.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    Upon looking at the install.log in the rave_home directory, I noticed the below sequence of errors.
    Timeout waiting for domain creator to go to starting state.
    Compiler warnings:
    line 44: Attribute 'debug-options' outside of element.
    line 62: Attribute 'port' outside of element.
    line 73: Attribute 'port' outside of element.
    line 84: Attribute 'port' outside of element.
    line 105: Attribute 'port' outside of element.
    line 116: Attribute 'port' outside of element.
    line 127: Attribute 'port' outside of element.
    line 145: Attribute 'port' outside of element.
    line 156: Attribute 'port' outside of element.
    CLI156 Could not start the domain creator.
    The following script has unexpected output: "C:\Creator2\bin\deploy-ws.bat"
    Aug 14, 2006 11:27:33 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    Aug 14, 2006 11:27:35 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    Aug 14, 2006 11:27:37 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    The following script has unexpected output: "C:\Creator2\bin\deploy-ejbs.bat"
    Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI137 Command create-jdbc-connection-pool failed.
    CLI137 Command create-jdbc-resource failed.
    CLI137 Command create-jdbc-connection-pool failed.
    CLI137 Command create-jdbc-resource failed.
    Aug 14, 2006 11:27:52 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    Aug 14, 2006 11:27:53 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    Aug 14, 2006 11:27:55 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    Aug 14, 2006 11:27:57 PM com.sun.appserv.management.client.ProxyFactory getInstance
    SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
    I've tried every workaround I've seen in the forums such as installing under different paths (both with spaces and without spaces), cleaning all the temporary files in the Temp directory, renaming the productregistry in the windows system directory. Each time I get the exact same error in the install.log.
    I also tried installing the stand alone SUN App Server 8.1_02_2005Q2 as well as 8.2. I don't seem to have any issue with this installation or running of the stand alone server at all on the same machine.
    Really appreciate any help I can get. TIA....
    rgds,
    KC

    Hi,
    After spending more time looking through the forum, I came across the below thread which has worked in my case (though it was suggested for Sol10x86).
    http://forum.sun.com/jive/thread.jspa?threadID=62404&messageID=243113
    This is the workaround that worked in my case.
    > $ cd <Creator_Home>/SunAppServer8/lib
    $ mv processLauncher.xml processLauncher.xml.trayIcon
    $ cp processLauncher.xml.bak processLauncher.xml
    # If you have a domains/creator/config/domain.xml
    $ cd ../bin
    $ ./asadmin start-domain creator
    This started the app server. After that I was able to start and stop app server within the JSC as well.
    Only difference between these two xml files seem to be,
    processLauncher.xml.trayicon
    <main_class classname="com.sun.rave.tray.RavePEMain"/>
    processLauncher.xml
    <main_class classname="com.sun.enterprise.server.PEMain"/>
    Possibly pointing to a bug in the "com.sun.rave.tray.RavePEMain" class.
    Thanks for your suggestions guys... and especially to Marco and Greg.
    Rgds,
    Kc
    Message was edited by:
    Kc

  • Oracle 10G : ORA-12500: TNS:listener failed to start a dedicated server pro

    When connecting to Oracle I am getting this error. I have restarted the database, restarted the listener, but the problem does not go away. I have increased the processes to 400.
    Error :
    ORA-12500: TNS:listener failed to start a dedicated server process
    listener.log :
    27-APR-2004 11:15:38 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2265)) * establish * BUILD.OCS.COM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    Listener.trc :
    [27-APR-2004 11:14:38:382] snttcallback: op = 5, bytes = 170, err = 0
    [27-APR-2004 11:14:38:382] ntt2err: soc 324 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
    [27-APR-2004 11:14:38:382] nsdo: 160 bytes from NS buffer
    [27-APR-2004 11:14:38:382] nsglgrDoRegister: inst loads: ld1:12 mld1:100 ld2:12 mld2:445
    [27-APR-2004 11:14:38:382] nsdo: 68 bytes to NS buffer
    [27-APR-2004 11:15:38:951] nsopen: opening transport...
    [27-APR-2004 11:15:38:951] nttcnp: Validnode Table IN use; err 0x0
    [27-APR-2004 11:15:38:951] nttcnp: getting sockname
    [27-APR-2004 11:15:38:951] nttcnr: waiting to accept a connection.
    [27-APR-2004 11:15:38:951] nttcnr: getting sockname
    [27-APR-2004 11:15:38:951] nttcnr: connected on ipaddr 192.168.180.112
    [27-APR-2004 11:15:38:951] nttvlser: valid node check on incoming node 192.168.180.112
    [27-APR-2004 11:15:38:951] nttvlser: Accepted Entry: 192.168.180.112
    [27-APR-2004 11:15:38:951] nttcon: set TCP_NODELAY on 288
    [27-APR-2004 11:15:38:951] nsopen: transport is open
    [27-APR-2004 11:15:38:951] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
    [27-APR-2004 11:15:38:951] nsopen: global context check-in (to slot 7) complete
    [27-APR-2004 11:15:38:951] nsanswer: deferring connect attempt; at stage 5
    [27-APR-2004 11:15:38:951] nscon: doing connect handshake...
    [27-APR-2004 11:15:38:951] nscon: got NSPTCN packet
    [27-APR-2004 11:15:38:951] nsevdrcvreq: recving connect data
    [27-APR-2004 11:15:38:951] nsdo: 248 bytes from NS buffer
    [27-APR-2004 11:15:38:951] nsevdansw: exit
    [27-APR-2004 11:15:38:951] nsglbgetRSPidx: returning ecode=0
    [27-APR-2004 11:15:38:951] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
    [27-APR-2004 11:15:38:951] nsbeqaddr: connecting...
    [27-APR-2004 11:15:38:951] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
    [27-APR-2004 11:15:38:951] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [27-APR-2004 11:15:38:951] nscon: sending NSPTRF packet
    [27-APR-2004 11:15:38:951] nstimarmed: no timer allocated
    [27-APR-2004 11:15:38:951] nsclose: closing transport
    [27-APR-2004 11:15:38:951] nsclose: global context check-out (from slot 7) complete
    [27-APR-2004 11:15:38:951] nsgldissolve: Deallocating cxd 0xd89e18.

    Listener.ora:
    lsncrtl status:
    LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 27-APR-2004 11:27:56
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
    Start Date 27-APR-2004 11:27:23
    Uptime 0 days 0 hr. 0 min. 33 sec
    Trace Level admin
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\10.1.0\db_1\network\admin\listener.ora
    Listener Log File C:\oracle\product\10.1.0\db_1\network\log\listener.log
    Listener Trace File C:\oracle\product\10.1.0\db_1\network\trace\listener.trc
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "BUILD" has 1 instance(s).
    Instance "BUILD", status UNKNOWN, has 1 handler(s) for this service...
    Service "BUILD.OCS.COM" has 1 instance(s).
    Instance "build", status READY, has 2 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    sqlnet.log:
    Fatal NI connect error 12500, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
    Time: 27-APR-2004 11:28:42
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    listener.log:
    27-APR-2004 11:28:42 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2527)) * establish * BUILD.OCS.COM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    listener.trc with ADMIN on:
    [27-APR-2004 11:28:42:011] nsevwait: 1 newly-posted event(s)
    [27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NT events set:
         CONNECTION REQUEST
    [27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NS events set:
         INCOMING CALL
    [27-APR-2004 11:28:42:011] nsevwait: event is 0x1, on 2
    [27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:42:011] nsglhe: entry
    [27-APR-2004 11:28:42:011] nsmal: 536 bytes at 0xd7c1f0
    [27-APR-2004 11:28:42:011] nsmal: 1632 bytes at 0xd7e638
    [27-APR-2004 11:28:42:011] nsopen: opening transport...
    [27-APR-2004 11:28:42:011] nttcon: entry
    [27-APR-2004 11:28:42:011] nttcon: toc = 3
    [27-APR-2004 11:28:42:011] nttcnp: entry
    [27-APR-2004 11:28:42:011] ntvlin: entry
    [27-APR-2004 11:28:42:011] ntvlin: exit
    [27-APR-2004 11:28:42:011] nttcnp: Validnode Table IN use; err 0x0
    [27-APR-2004 11:28:42:011] nttcnp: getting sockname
    [27-APR-2004 11:28:42:011] nttcnp: exit
    [27-APR-2004 11:28:42:011] nttcnr: entry
    [27-APR-2004 11:28:42:011] nttcnr: waiting to accept a connection.
    [27-APR-2004 11:28:42:011] nttcnr: getting sockname
    [27-APR-2004 11:28:42:011] nttcnr: connected on ipaddr 192.168.180.112
    [27-APR-2004 11:28:42:011] nttvlser: entry
    [27-APR-2004 11:28:42:011] nttvlser: valid node check on incoming node 192.168.180.112
    [27-APR-2004 11:28:42:011] nttvlser: Accepted Entry: 192.168.180.112
    [27-APR-2004 11:28:42:011] nttcnr: exit
    [27-APR-2004 11:28:42:011] nttcon: set TCP_NODELAY on 248
    [27-APR-2004 11:28:42:011] nttcon: exit
    [27-APR-2004 11:28:42:011] nsopen: transport is open
    [27-APR-2004 11:28:42:011] nsnainit: answer
    [27-APR-2004 11:28:42:011] nsnasvnainfo: NA disabled for this connection
    [27-APR-2004 11:28:42:011] nainit: entry
    [27-APR-2004 11:28:42:011] nagblini: entry
    [27-APR-2004 11:28:42:011] nau_gin: entry
    [27-APR-2004 11:28:42:011] nau_gparams: entry
    [27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
    [27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
    [27-APR-2004 11:28:42:011] nau_gparams: Using default value "FALSE"
    [27-APR-2004 11:28:42:011] nau_gslf: entry
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: Found 0 items
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] nau_gslf: Using default value "all available adapters"
    [27-APR-2004 11:28:42:011] nauss_set_state: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: exit
    [27-APR-2004 11:28:42:011] nau_gslf: exit
    [27-APR-2004 11:28:42:011] nau_gparams: exit
    [27-APR-2004 11:28:42:011] nau_gin: exit
    [27-APR-2004 11:28:42:011] nagblini: exit
    [27-APR-2004 11:28:42:011] na_saveprot: entry
    [27-APR-2004 11:28:42:011] na_saveprot: exit
    [27-APR-2004 11:28:42:011] nacomin: entry
    [27-APR-2004 11:28:42:011] nas_init: entry
    [27-APR-2004 11:28:42:011] nas_init: exit
    [27-APR-2004 11:28:42:011] nau_ini: entry
    [27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: exit
    [27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: exit
    [27-APR-2004 11:28:42:011] nau_gettab: entry
    [27-APR-2004 11:28:42:011] nau_gettab: exit
    [27-APR-2004 11:28:42:011] nau_sini: entry
    [27-APR-2004 11:28:42:011] nau_sini: exit
    [27-APR-2004 11:28:42:011] nau_ini: exit
    [27-APR-2004 11:28:42:011] naeeinit: entry
    [27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
    [27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
    [27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
    [27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
    [27-APR-2004 11:28:42:011] naeshow: entry
    [27-APR-2004 11:28:42:011] naeshow: exit
    [27-APR-2004 11:28:42:011] naeeinit: exit
    [27-APR-2004 11:28:42:011] naecinit: entry
    [27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
    [27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
    [27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
    [27-APR-2004 11:28:42:011] naeshow: entry
    [27-APR-2004 11:28:42:011] naeshow: exit
    [27-APR-2004 11:28:42:011] naecinit: exit
    [27-APR-2004 11:28:42:011] nadisc: entry
    [27-APR-2004 11:28:42:011] nacomtm: entry
    [27-APR-2004 11:28:42:011] nacompd: entry
    [27-APR-2004 11:28:42:011] nacompd: exit
    [27-APR-2004 11:28:42:011] nacompd: entry
    [27-APR-2004 11:28:42:011] nacompd: exit
    [27-APR-2004 11:28:42:011] nacomtm: exit
    [27-APR-2004 11:28:42:011] nas_dis: entry
    [27-APR-2004 11:28:42:011] nas_dis: exit
    [27-APR-2004 11:28:42:011] nau_dis: entry
    [27-APR-2004 11:28:42:011] nau_dis: exit
    [27-APR-2004 11:28:42:011] naeetrm: entry
    [27-APR-2004 11:28:42:011] naeetrm: exit
    [27-APR-2004 11:28:42:011] naectrm: entry
    [27-APR-2004 11:28:42:011] naectrm: exit
    [27-APR-2004 11:28:42:011] nagbltrm: entry
    [27-APR-2004 11:28:42:011] nau_gtm: entry
    [27-APR-2004 11:28:42:011] nau_gtm: exit
    [27-APR-2004 11:28:42:011] nagbltrm: exit
    [27-APR-2004 11:28:42:011] nadisc: exit
    [27-APR-2004 11:28:42:011] nainit: exit
    [27-APR-2004 11:28:42:011] nsnainit: NS Connection version: 313
    [27-APR-2004 11:28:42:011] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
    [27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    [27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    "and" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    [27-APR-2004 11:28:42:011] nsopen: global context check-in (to slot 7) complete
    [27-APR-2004 11:28:42:011] nsopen: lcl[0]=0x34ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=7, flg=0x4000, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsanswer: deferring connect attempt; at stage 5
    [27-APR-2004 11:28:42:011] nsevreg: begin registration process for 7
    [27-APR-2004 11:28:42:011] nsevreg: sgt=0, evn=4, evt[2]=0x0
    [27-APR-2004 11:28:42:011] nsevreg: begin notification process for 7
    [27-APR-2004 11:28:42:011] nsrah: setting transport read mode (2)
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Clearing non-blocking mode
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Setting connection into async mode
    [27-APR-2004 11:28:42:011] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
    [27-APR-2004 11:28:42:011] nsevreg: registering for 0x20
    [27-APR-2004 11:28:42:011] nttmrd: entry
    [27-APR-2004 11:28:42:011] nttrd: entry
    [27-APR-2004 11:28:42:011] snttcallback: entry
    [27-APR-2004 11:28:42:011] snttcallback: exit
    [27-APR-2004 11:28:42:011] nttrd: socket 248 had bytes read=316
    [27-APR-2004 11:28:42:011] nttrd: exit
    [27-APR-2004 11:28:42:011] nsglhe: exit
    [27-APR-2004 11:28:42:011] nsevwait: 7 registered connection(s)
    [27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 7)...
    [27-APR-2004 11:28:42:011] nsevwait: 0 newly-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevdansw: at STAGE 5
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=14, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
    [27-APR-2004 11:28:42:011] nscon: doing connect handshake...
    [27-APR-2004 11:28:42:011] nscon: recving a packet
    [27-APR-2004 11:28:42:011] nsprecv: 316 bytes from leftover
    [27-APR-2004 11:28:42:011] nsprecv: tlen=316, plen=58, type=1
    [27-APR-2004 11:28:42:011] nsprecv: 258 bytes to leftover
    [27-APR-2004 11:28:42:011] nscon: got NSPTCN packet
    [27-APR-2004 11:28:42:011] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0x860e
    [27-APR-2004 11:28:42:011] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
    [27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsevdrcvreq: recving connect data
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=248, what=1, uflgs=0x4001, cflgs=0x0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=58, gtc=58, ptn=10, ptc=2011
    [27-APR-2004 11:28:42:011] nsrdr: recving a packet
    [27-APR-2004 11:28:42:011] nsprecv: 258 bytes from leftover
    [27-APR-2004 11:28:42:011] nsprecv: tlen=258, plen=258, type=6
    [27-APR-2004 11:28:42:011] nsrdr: got NSPTDA packet
    [27-APR-2004 11:28:42:011] nsrdr: NSPTDA flags: 0x0
    [27-APR-2004 11:28:42:011] nsdo: what=1, bl=248
    [27-APR-2004 11:28:42:011] nsdo: 248 bytes from NS buffer
    [27-APR-2004 11:28:42:011] nsevdrcvreq: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nsevdansw: exit
    [27-APR-2004 11:28:42:011] nsevwait: event is 0x20, on 7
    [27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:42:011] nsglhe: entry
    [27-APR-2004 11:28:42:011] nsglfc: Assume establishing a connection...
    [27-APR-2004 11:28:42:011] nsglfc: command = establish
    [27-APR-2004 11:28:42:011] nsglauthorized: entry
    [27-APR-2004 11:28:42:011] nsglecmd: entry
    [27-APR-2004 11:28:42:011] nttaddr2bnd: entry
    [27-APR-2004 11:28:42:011] nttaddr2bnd: exit
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: entry
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: returning ecode=0
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: exit
    [27-APR-2004 11:28:42:011] nsglb: entry
    [27-APR-2004 11:28:42:011] nsglb: exit
    [27-APR-2004 11:28:42:011] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
    [27-APR-2004 11:28:42:011] nlpcaini: entry
    [27-APR-2004 11:28:42:011] nlpcaini: prg = oracle
    [27-APR-2004 11:28:42:011] nlpcaini: arg[0] = oraclebuild
    [27-APR-2004 11:28:42:011] nlpcaini: arg[1] = (LOCAL=NO)
    [27-APR-2004 11:28:42:011] nlpcaini: exit
    [27-APR-2004 11:28:42:011] nsbeqaddr: connecting...
    [27-APR-2004 11:28:42:011] ntpcon: entry
    [27-APR-2004 11:28:42:011] ntpcon: toc = 1
    [27-APR-2004 11:28:42:011] sntpcall: entry
    [27-APR-2004 11:28:42:011] snlpcss: entry
    [27-APR-2004 11:28:42:011] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
    [27-APR-2004 11:28:42:011] sntpcall: exit
    [27-APR-2004 11:28:42:011] ntpcon: exit
    [27-APR-2004 11:28:42:011] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [27-APR-2004 11:28:42:011] nsglrespond: entry
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=67, bl=161, what=10, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=258, gtc=258, ptn=10, ptc=2011
    [27-APR-2004 11:28:42:011] nscon: sending NSPTRF packet
    [27-APR-2004 11:28:42:011] nspsend: plen=173, type=4
    [27-APR-2004 11:28:42:011] nttmwr: entry
    [27-APR-2004 11:28:42:011] nttwr: entry
    [27-APR-2004 11:28:42:011] snttcallback: entry
    [27-APR-2004 11:28:42:011] snttcallback: exit
    [27-APR-2004 11:28:42:011] nttwr: socket 248 had bytes written=173
    [27-APR-2004 11:28:42:011] nttwr: exit
    [27-APR-2004 11:28:42:011] nspsend: 173 bytes to transport
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nstimarmed: no timer allocated
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=66, bl=0, what=0, uflgs=0x0, cflgs=0x2
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4000, mvd=0
    [27-APR-2004 11:28:42:011] nsevunreg: cid=7, sgt=0, rdm=2
    [27-APR-2004 11:28:42:011] nsrah: re-setting transport read mode
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Clearing async mode
    [27-APR-2004 11:28:42:011] nsevunreg: 6 registered connection(s)
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsclose: closing transport
    [27-APR-2004 11:28:42:011] nttdisc: entry
    [27-APR-2004 11:28:42:011] nttdisc: Closed socket 248
    [27-APR-2004 11:28:42:011] nttdisc: exit
    [27-APR-2004 11:28:42:011] nsclose: global context check-out (from slot 7) complete
    [27-APR-2004 11:28:42:011] nsmfr: 1632 bytes at 0xd7e638
    [27-APR-2004 11:28:42:011] nsmfr: 536 bytes at 0xd7c1f0
    [27-APR-2004 11:28:42:011] nsgldissolve: entry
    [27-APR-2004 11:28:42:011] nsgldissolve: Deallocating cxd 0xd7c608.
    [27-APR-2004 11:28:42:011] nsgldissolve: exit
    [27-APR-2004 11:28:42:011] nsglrespond: exit
    [27-APR-2004 11:28:42:011] nsglecmd: exit
    [27-APR-2004 11:28:42:011] nsglhe: exit
    [27-APR-2004 11:28:42:011] nsevwait: 6 registered connection(s)
    [27-APR-2004 11:28:42:011] nsevwait: 0 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 6)...
    [27-APR-2004 11:28:45:136] snttcallback: entry
    [27-APR-2004 11:28:45:136] snttcallback: op = 5, bytes = 170, err = 0
    [27-APR-2004 11:28:45:136] snttcallback: exit
    [27-APR-2004 11:28:45:136] nsevwait: 0 newly-posted event(s)
    [27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NT events set:
         READ
    [27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NS events set:
         INCOMING SEND
    [27-APR-2004 11:28:45:136] nsevwait: event is 0x2, on 4
    [27-APR-2004 11:28:45:136] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:45:136] nsglhe: entry
    [27-APR-2004 11:28:45:136] nsglrohe: entry
    [27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=68, bl=8196, what=0, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
    [27-APR-2004 11:28:45:136] nsdo: gtn=258, gtc=258, ptn=10, ptc=8155
    [27-APR-2004 11:28:45:136] nsrdr: recving a packet
    [27-APR-2004 11:28:45:136] nsprecv: 170 bytes from leftover
    [27-APR-2004 11:28:45:136] nsprecv: tlen=170, plen=170, type=6
    [27-APR-2004 11:28:45:136] nttmrd: entry
    [27-APR-2004 11:28:45:136] nttrd: entry
    [27-APR-2004 11:28:45:136] ntt2err: entry
    [27-APR-2004 11:28:45:136] ntt2err: soc 296 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
    [27-APR-2004 11:28:45:136] ntt2err: exit
    [27-APR-2004 11:28:45:136] nttrd: exit
    [27-APR-2004 11:28:45:136] nsrdr: got NSPTDA packet
    [27-APR-2004 11:28:45:136] nsrdr: NSPTDA flags: 0x0
    [27-APR-2004 11:28:45:136] nsdo: what=1, bl=8196
    [27-APR-2004 11:28:45:136] nsdo: 160 bytes from NS buffer
    [27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsglgrDoRegister: inst loads: ld1:51 mld1:100 ld2:12 mld2:445
    [27-APR-2004 11:28:45:136] nsglgrDoRegister: exit
    [27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=67, bl=68, what=1, uflgs=0x2, cflgs=0x3
    [27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
    [27-APR-2004 11:28:45:136] nsdo: gtn=170, gtc=170, ptn=10, ptc=8155
    [27-APR-2004 11:28:45:136] nsdo: 68 bytes to NS buffer
    [27-APR-2004 11:28:45:136] nsdofls: DATA flags: 0x0
    [27-APR-2004 11:28:45:136] nsdofls: sending NSPTDA packet
    [27-APR-2004 11:28:45:136] nspsend: plen=78, type=6
    [27-APR-2004 11:28:45:136] nttmwr: entry
    [27-APR-2004 11:28:45:136] nttwr: entry
    [27-APR-2004 11:28:45:136] snttcallback: entry
    [27-APR-2004 11:28:45:136] snttcallback: exit
    [27-APR-2004 11:28:45:136] nttwr: socket 296 had bytes written=78
    [27-APR-2004 11:28:45:136] nttwr: exit
    [27-APR-2004 11:28:45:136] nspsend: 78 bytes to transport
    [27-APR-2004 11:28:45:136] nsdoacts: flushing transport
    [27-APR-2004 11:28:45:136] nttctl: entry
    [27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsglroHandleError: exit
    [27-APR-2004 11:28:45:136] nsglrohe: exit
    [27-APR-2004 11:28:45:136] nsglhe: exit
    [27-APR-2004 11:28:45:136] nsevwait: 6 registered connection(s)
    [27-APR-2004 11:28:45:136] nsevwait: 0 pre-posted event(s)
    [27-APR-2004 11:28:45:136] nsevwait: waiting for transport event (0 thru 6)...

  • Oracle 9i Report Server Failed to start

    Hi,
    My Oracle 9i Report Server Failed to start, I think it is due to patch problem with OS
    It was workin fine before we upgraded patch to Sun Solaris Machine.
    Now the Patch set In my OS is
    The patched installed are as follows
    112138-01 Synopsis: SunOS 5.8:: usr/bin/domainname patch
    108652-98 X11 6.4.1: Xsun patch
    108921-25 CDE 1.4: dtwm patch
    108940-72 Motif 1.2.7 and 2.1.1: Runtime library patch for Solaris 8
    OS: SunOS 5.8 Generic_117350-37 sun4u sparc SUNW, Ultra-4
    When i try to start the application Server it shows the below error pls Help.
    ......Starting Oracle HTTP Server.....
    ADMN-100999
    ......Started Oracle HTTP Server.....
    ......Started OC4J instance.....
    ADMN-100999
    ......Started OC4J instance.....
    .....Checking OHS and OC4J status.....
    ADMN-100999
    See base exception for details.
    Base Exception:
    oracle.ias.repository.schema.SchemaException:Unable to connect to Directory Server:javax.naming.CommunicationException: it15242.chennai.ford.com:4032 [Root exception is java.net.ConnectException: Connection refused]
    See base exception for details.
    .....PRESS ENTER TO CONTINUE.......
    ......Starting Web Cache...........
    Oracle9iAS Web Cache, Version 9.0.2.0.0
    Copyright: Oracle Corporation, 1999-2001
    Build CALYPSO_9.0.0_SOLARIS_020411
    Admin Server failed to start
    ......Started Web Cache...........
    .....PRESS ENTER TO EXIT.......
    Please Help me out to solve this issue.

    I am assuming you are using 9iR2:
    1. start your infrastructure database
    2. start oid
    nohup oidmon start
    nohup oidctl server=oidldapd configset=0 instance=1 start
    3. check to see if things seem to be working properly in the infrastructure before starting the midtier
    dcmctl getstate -v (this will give you the status of the infrastructure components). If this comes back in error, you will need to solve this first.

  • Listener Fail to start

    Hi gurus,
    We encountered the following error when starting database listener:
    E:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-NOV-2012 19:28:57
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.236.8.50)(PORT=1523)))
    TNS-01192: Missing SID_LIST_ value left of equation for SID description in LISTENER.ORA
    Listener failed to start. See the error message(s) above...
    The listener.ora file entries are as below:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ABG-FINTRAK.accessbankplc.com)(PORT = 1523))
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.236.8.50)(PORT = 1523))
    FINTRAKDUMP =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = fintrakdump)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    Your assistance will be very much appreciated.
    Best Regards.

    PVOWUSU wrote:
    Hi gurus,
    We encountered the following error when starting database listener:
    E:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-NOV-2012 19:28:57
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
    Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.236.8.50)(PORT=1523)))
    TNS-01192: Missing SID_LIST_ value left of equation for SID description in LISTENER.ORA
    Listener failed to start. See the error message(s) above...
    The listener.ora file entries are as below:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ABG-FINTRAK.accessbankplc.com)(PORT = 1523))
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.236.8.50)(PORT = 1523))
    FINTRAKDUMP =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = fintrakdump)
    (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    Your assistance will be very much appreciated.
    Best Regards.Why do you have two LISTENER sections? That is the section that actually defines the listener. And what is the FINTRAKDUMP section supposed to be?
    Delete this mess and start over, using netca to create it. You only need one listener, default name of LISTENER, and only one SID_LIST section, named SID_LIST_LISTENER. Anything more is error-prone and unnecessary complications.

  • TNS-12500: TNS:listener failed to start a dedicated server process

    Hello all,
    I have recently applied a patch on apps tier, after which the concurrent manager is not up & running,
    while viewing the internal log
    im getting the below error
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
    Starting AVAILMGR Concurrent Manager               : 25-NOV-2013 13:02:02
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager AVAILMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
                         Process monitor session ended : 25-NOV-2013 13:02:02
    ========================================================================
    Starting test_1125@test Internal Concurrent Manager -- shell process ID 25362
              logfile=/d01/apps/testcomn/admin/log/test_test/test_1125.mgr
              PRINTER=noprint
               mailto=appltest
              restart=N
                 diag=N
                sleep=60 (default)
                 pmon=20 (default)
               quesiz=1  (default)
    Routine &ROUTINE has attempted to start the internal concurrent manager.  The ICM is already running.  Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
    Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
    Possible DBMS_LOCK.Request resultCall to establish_icm failed
    The Internal Concurrent Manager has encountered an error.
    Review concurrent manager log file for more detailed information. : 25-NOV-2013 13:03:01 -
    Shutting down Internal Concurrent Manager : 25-NOV-2013 13:03:01
    List of errors encountered:
    _ 1 _
    Routine AFPCSQ encountered an ORACLE error. .
    Review your error messages for the cause of the error. (=<POINTER>)
    List of errors encountered:
    _ 1 _
    Routine AFPCAL received failure code while parsing or running your
    concurrent program CPMGR
    Review your concurrent request log file for more detailed information.
    Make sure you are passing arguments in the correct format.
    The test_1125@test internal concurrent manager has terminated with status 1 - giving up.
    WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)
    can not chdir(/var/spool/clientmqueue/): Permission denied
    Program mode requires special privileges, e.g., root or TrustedUser.
    Also in apps tier $TNS_ADMIN
    the log says
    25-NOV-2013 14:57:51 * ping * 0
    25-NOV-2013 14:57:51 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=5147)) * establish * FNDSM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12547: TNS:lost contact
      TNS-12560: TNS:protocol adapter error
       TNS-00517: Lost contact
        Linux Error: 32: Broken pipe

    HI thanks for your reply,
    I tried the above guide but dint helped me,
    I tried modifiying Concurrent:GSM Enabled to N & concurrent manager started but all requests were in pending state not running so i reverted back to Concurrent:GSM Enabled Y
    I ran autoconfig & this is the lastes error I am getting in internal manager log.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:18
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:18
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
    Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
    Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
    Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
    Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
    The below is the log from $TNS_ADMIN log directory apps_test.ora
    25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.30.82)(PORT=13510)) * establish * FNDSM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12547: TNS:lost contact
      TNS-12560: TNS:protocol adapter error
       TNS-00517: Lost contact
        Linux Error: 32: Broken pipe
    25-NOV-2013 16:06:01 * ping * 0
    25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13512)) * establish * FNDSM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12547: TNS:lost contact
      TNS-12560: TNS:protocol adapter error
       TNS-00517: Lost contact
        Linux Error: 32: Broken pipe
    25-NOV-2013 16:06:02 * ping * 0
    25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13514)) * establish * FNDSM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12547: TNS:lost contact
      TNS-12560: TNS:protocol adapter error
       TNS-00517: Lost contact
        Linux Error: 32: Broken pipe
    25-NOV-2013 16:06:02 * ping * 0
    25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=13516)) * establish * FNDSM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12547: TNS:lost contact
      TNS-12560: TNS:protocol adapter error
       TNS-00517: Lost contact
        Linux Error: 32: Broken pipe

  • DB 9i - TNS-12500: TNS:listener failed to start a dedicated server process

    hi all,
    I have a problem with the following configuration oracle 9.2.0.1 (32bits) on Win server 2003 - enterprise x64 edition - 10GM of RAM.
    I installed DB without problem, run server, started listener - seems all is fine. But when trying a remote connection, "listener failed to start a dedicated server process"
    log listener -------
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=2100))(Presentation=FTP)(Session=RAW))
    04-MAR-2010 05:31:04 * service_register * PRESS * 0
    04-MAR-2010 05:31:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Administrator))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
    04-MAR-2010 05:31:36 * ping * 0
    04-MAR-2010 05:31:39 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRESS)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_1\bin\sqlplus.exe)(HOST=MMARFELLA-NB)(USER=mmarfella))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.103.28)(PORT=2838)) * establish * PRESS * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    32-bit Windows Error: 5: Input/output error
    I ask You, because I am not too familiar with Windows environment and very likely I forget/miss something obvious (in this env).
    Thanks in advance
    Marfy

    I solved installing upgrade to 9.2.0.8.
    Now It's all OK.
    Regards
    Marfy

  • Oracle 10 g OEM does not start after XP boot

    Hallo!I am currently studying for the Oracle 10g Administration OCA
    I installed Oracle 10 g on Windows XP but once I boot the OS and enter the OEM url on the browser,OEM does not load.
    I am forced to go to the command prompt and manually start OEM via the command
    emctl start dbconsole.
    How can I configure my oracle to enable OEM to automatically start after booting the OS?
    Thanks.

    Hans Forbrich wrote:
    user11114098 wrote:
    During installation,the computer was connected to the internet via a modem that uses DHCP?So typical.
    How do I resolve this issue?Microsoft Loopback Adapter. Force it to a static IP value, and enter that value in the hosts. table.
    How?: Discussed more than a few times in these forums. Discussed in Microsoft forums. Discussed on internet.Also discussed in the Fine Installation Guide ... ;-)

  • 'ORA-12500: TNS: Listener failed to start a dedicated server process'

    Hi,
    While connecting from one database to another users are getting the below error when they are giving a select statement,its taking around 30 minutes and showing
    'ORA-12500: TNS: Listener failed to start a dedicated server process'...
    What could be the issue...
    Thanks,
    Kr.

    If database to which they are trying to connect is running, then check listener.log ($ORACLE_HOME/network/log).
    Probably there is not enough system resources - check opsystem logs as well (on unix /var/log or /var/adm) on windows look at events.
    Look into db alert.log as well.

  • ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4

    I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
    There is a crash report but I don't know how to read it. See attached.
    Please help, I need this working for my job.
    Thanks...Colin

    Dear Craig,
    Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
    I'm sure that this is 64-bit
    CF 8.0.1 Enterprise Build 3080
    I had moved the Java SE 6 to the top in both Plugin and Applications. The
    correct version is showing in the terminal window. See below.
    Last login: Thu Jun 18 11:27:09 on ttys001
    Beta-4:~ Colin$ java -version
    java version "1.6.0_13"
    Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
    Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
    Beta-4:~ Colin$
    CF will not start. I have the activity monitor open, and when I start CF you
    see it in the activity monitor for a few seconds as it starts up. When the
    message process is completed in the terminal window CF disappears in the
    activity monitor.
    Any suggestions?
    C
    Hi, Colin,
    My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
    (Intel or PowerPC)? (2) What version of CF are you running and what installer
    did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
    To start, try the following:
    1. Normally you'd shut CF down first ... but that's not necessary for you
    2. Open Java Preferences again
    3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
    Plugin and Applications)
    4. Open Terminal
    5. Type java -version (you should see 1.6.0_13 as the new version)
    6. Try to start CF again
    This may not work (I've had issues with it) but it's technically how it's
    supposed to work. With the Java Preferences utility, you're visually setting a
    default JVM (you can do it with commands in Terminal but this is much faster
    and easier).
    If CF still won't start, look for the jvm.config file in your CF application
    folder (try /Applications/ColdFusion8/bin or
    /Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
    is on my machine for a particular version of CF that's installed similar to
    yours). You can override the JVM in this file but, hopefully, that won't be
    necessary!
    Best,
    Craig

  • HT1349 ITunes failed to start after an upgrade, won't allow me to re-install saying "Apple Mobile Device failed to start, check for sufficient priveleges"

    My ITunes library failed to start after an upgrade, now I'm unable to open or re-install.  Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system".  Any help with this?  I've tried un-installing and downloading only to get the same message again.

    Thank you to "turingtest2", solution for someone else worked for me as well!

  • Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

    Hi,
    My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
    Same issue for iphoto .
    Help
    Benoit

    help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

  • TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

    when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
    i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
    http://www.apple.com/support/systemstatus/

Maybe you are looking for

  • ITunes keeps saying damaged library

    Dunno whats happened but everytime now when i connect my ipod video itunes always pop up with an error message before it opens saying something along the lines of 'itunes library is damaged, do you want to replace this file' or something like that, a

  • Add attribute to standard objectclass

    Hi, is it possible to add user defined attributes to an standard objectclass in iPlanet Directory Server 5.0 ? I've created an attribute using ldapmodify and than I tried to add this attribute to the objectclass inetorgprerson using ldapmodify. First

  • Api call to get perspectives?

    hi, does anyone know API call to get perspective(s) of current page - or more specifically, of items on the current page? thanks kev

  • BADI TRIP_POST_FI - Standard Implementation

    Hello Experts, I am trying to use the BADI TRIP_POST_FI, this is related to interface IF_EX_TRIP_POST_FI. But the standard class CL_EX_TRIP_POST_FI  is already using this interface, and has imple-mentation for all methods. So, although I can create a

  • [SOLVED] Existing GRUB Win menu entries don't appear

    Hi, Just finished a fresh dual boot (Arch-64/Win7-64), dual HDs installation. I've installed os-prober prior to installing grub, and indeed a (seemingly) correct menu entry was added (in segment 30-see below). Yet after reboot, this entry does NOT ap