Listener Fail to start
Hi gurus,
We encountered the following error when starting database listener:
E:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-NOV-2012 19:28:57
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.236.8.50)(PORT=1523)))
TNS-01192: Missing SID_LIST_ value left of equation for SID description in LISTENER.ORA
Listener failed to start. See the error message(s) above...
The listener.ora file entries are as below:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABG-FINTRAK.accessbankplc.com)(PORT = 1523))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.236.8.50)(PORT = 1523))
FINTRAKDUMP =
(SID_LIST =
(SID_DESC =
(SID_NAME = fintrakdump)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
Your assistance will be very much appreciated.
Best Regards.
PVOWUSU wrote:
Hi gurus,
We encountered the following error when starting database listener:
E:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 01-NOV-2012 19:28:57
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.236.8.50)(PORT=1523)))
TNS-01192: Missing SID_LIST_ value left of equation for SID description in LISTENER.ORA
Listener failed to start. See the error message(s) above...
The listener.ora file entries are as below:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABG-FINTRAK.accessbankplc.com)(PORT = 1523))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.236.8.50)(PORT = 1523))
FINTRAKDUMP =
(SID_LIST =
(SID_DESC =
(SID_NAME = fintrakdump)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
Your assistance will be very much appreciated.
Best Regards.Why do you have two LISTENER sections? That is the section that actually defines the listener. And what is the FINTRAKDUMP section supposed to be?
Delete this mess and start over, using netca to create it. You only need one listener, default name of LISTENER, and only one SID_LIST section, named SID_LIST_LISTENER. Anything more is error-prone and unnecessary complications.
Similar Messages
-
Multiple Oracle Homes - Oracle Listener failes to start after installation
Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related detailshi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards -
'ORA-12500: TNS: Listener failed to start a dedicated server process'
Hi,
While connecting from one database to another users are getting the below error when they are giving a select statement,its taking around 30 minutes and showing
'ORA-12500: TNS: Listener failed to start a dedicated server process'...
What could be the issue...
Thanks,
Kr.If database to which they are trying to connect is running, then check listener.log ($ORACLE_HOME/network/log).
Probably there is not enough system resources - check opsystem logs as well (on unix /var/log or /var/adm) on windows look at events.
Look into db alert.log as well. -
Oracle 10G : ORA-12500: TNS:listener failed to start a dedicated server pro
When connecting to Oracle I am getting this error. I have restarted the database, restarted the listener, but the problem does not go away. I have increased the processes to 400.
Error :
ORA-12500: TNS:listener failed to start a dedicated server process
listener.log :
27-APR-2004 11:15:38 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2265)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Listener.trc :
[27-APR-2004 11:14:38:382] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:14:38:382] ntt2err: soc 324 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:14:38:382] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:14:38:382] nsglgrDoRegister: inst loads: ld1:12 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:14:38:382] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:15:38:951] nsopen: opening transport...
[27-APR-2004 11:15:38:951] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:15:38:951] nttcnp: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: waiting to accept a connection.
[27-APR-2004 11:15:38:951] nttcnr: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:15:38:951] nttcon: set TCP_NODELAY on 288
[27-APR-2004 11:15:38:951] nsopen: transport is open
[27-APR-2004 11:15:38:951] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:15:38:951] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:15:38:951] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:15:38:951] nscon: doing connect handshake...
[27-APR-2004 11:15:38:951] nscon: got NSPTCN packet
[27-APR-2004 11:15:38:951] nsevdrcvreq: recving connect data
[27-APR-2004 11:15:38:951] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:15:38:951] nsevdansw: exit
[27-APR-2004 11:15:38:951] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:15:38:951] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:15:38:951] nsbeqaddr: connecting...
[27-APR-2004 11:15:38:951] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:15:38:951] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:15:38:951] nscon: sending NSPTRF packet
[27-APR-2004 11:15:38:951] nstimarmed: no timer allocated
[27-APR-2004 11:15:38:951] nsclose: closing transport
[27-APR-2004 11:15:38:951] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:15:38:951] nsgldissolve: Deallocating cxd 0xd89e18.Listener.ora:
lsncrtl status:
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 27-APR-2004 11:27:56
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
Start Date 27-APR-2004 11:27:23
Uptime 0 days 0 hr. 0 min. 33 sec
Trace Level admin
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.1.0\db_1\network\admin\listener.ora
Listener Log File C:\oracle\product\10.1.0\db_1\network\log\listener.log
Listener Trace File C:\oracle\product\10.1.0\db_1\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "BUILD" has 1 instance(s).
Instance "BUILD", status UNKNOWN, has 1 handler(s) for this service...
Service "BUILD.OCS.COM" has 1 instance(s).
Instance "build", status READY, has 2 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
sqlnet.log:
Fatal NI connect error 12500, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 27-APR-2004 11:28:42
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log:
27-APR-2004 11:28:42 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2527)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
listener.trc with ADMIN on:
[27-APR-2004 11:28:42:011] nsevwait: 1 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NT events set:
CONNECTION REQUEST
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NS events set:
INCOMING CALL
[27-APR-2004 11:28:42:011] nsevwait: event is 0x1, on 2
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsmal: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsmal: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsopen: opening transport...
[27-APR-2004 11:28:42:011] nttcon: entry
[27-APR-2004 11:28:42:011] nttcon: toc = 3
[27-APR-2004 11:28:42:011] nttcnp: entry
[27-APR-2004 11:28:42:011] ntvlin: entry
[27-APR-2004 11:28:42:011] ntvlin: exit
[27-APR-2004 11:28:42:011] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:28:42:011] nttcnp: getting sockname
[27-APR-2004 11:28:42:011] nttcnp: exit
[27-APR-2004 11:28:42:011] nttcnr: entry
[27-APR-2004 11:28:42:011] nttcnr: waiting to accept a connection.
[27-APR-2004 11:28:42:011] nttcnr: getting sockname
[27-APR-2004 11:28:42:011] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: entry
[27-APR-2004 11:28:42:011] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:28:42:011] nttcnr: exit
[27-APR-2004 11:28:42:011] nttcon: set TCP_NODELAY on 248
[27-APR-2004 11:28:42:011] nttcon: exit
[27-APR-2004 11:28:42:011] nsopen: transport is open
[27-APR-2004 11:28:42:011] nsnainit: answer
[27-APR-2004 11:28:42:011] nsnasvnainfo: NA disabled for this connection
[27-APR-2004 11:28:42:011] nainit: entry
[27-APR-2004 11:28:42:011] nagblini: entry
[27-APR-2004 11:28:42:011] nau_gin: entry
[27-APR-2004 11:28:42:011] nau_gparams: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nau_gparams: Using default value "FALSE"
[27-APR-2004 11:28:42:011] nau_gslf: entry
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: Found 0 items
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] nau_gslf: Using default value "all available adapters"
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] nau_gslf: exit
[27-APR-2004 11:28:42:011] nau_gparams: exit
[27-APR-2004 11:28:42:011] nau_gin: exit
[27-APR-2004 11:28:42:011] nagblini: exit
[27-APR-2004 11:28:42:011] na_saveprot: entry
[27-APR-2004 11:28:42:011] na_saveprot: exit
[27-APR-2004 11:28:42:011] nacomin: entry
[27-APR-2004 11:28:42:011] nas_init: entry
[27-APR-2004 11:28:42:011] nas_init: exit
[27-APR-2004 11:28:42:011] nau_ini: entry
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: entry
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: exit
[27-APR-2004 11:28:42:011] nau_gettab: entry
[27-APR-2004 11:28:42:011] nau_gettab: exit
[27-APR-2004 11:28:42:011] nau_sini: entry
[27-APR-2004 11:28:42:011] nau_sini: exit
[27-APR-2004 11:28:42:011] nau_ini: exit
[27-APR-2004 11:28:42:011] naeeinit: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naeeinit: exit
[27-APR-2004 11:28:42:011] naecinit: entry
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naecinit: exit
[27-APR-2004 11:28:42:011] nadisc: entry
[27-APR-2004 11:28:42:011] nacomtm: entry
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacomtm: exit
[27-APR-2004 11:28:42:011] nas_dis: entry
[27-APR-2004 11:28:42:011] nas_dis: exit
[27-APR-2004 11:28:42:011] nau_dis: entry
[27-APR-2004 11:28:42:011] nau_dis: exit
[27-APR-2004 11:28:42:011] naeetrm: entry
[27-APR-2004 11:28:42:011] naeetrm: exit
[27-APR-2004 11:28:42:011] naectrm: entry
[27-APR-2004 11:28:42:011] naectrm: exit
[27-APR-2004 11:28:42:011] nagbltrm: entry
[27-APR-2004 11:28:42:011] nau_gtm: entry
[27-APR-2004 11:28:42:011] nau_gtm: exit
[27-APR-2004 11:28:42:011] nagbltrm: exit
[27-APR-2004 11:28:42:011] nadisc: exit
[27-APR-2004 11:28:42:011] nainit: exit
[27-APR-2004 11:28:42:011] nsnainit: NS Connection version: 313
[27-APR-2004 11:28:42:011] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:28:42:011] nsopen: lcl[0]=0x34ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=7, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:28:42:011] nsevreg: begin registration process for 7
[27-APR-2004 11:28:42:011] nsevreg: sgt=0, evn=4, evt[2]=0x0
[27-APR-2004 11:28:42:011] nsevreg: begin notification process for 7
[27-APR-2004 11:28:42:011] nsrah: setting transport read mode (2)
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing non-blocking mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Setting connection into async mode
[27-APR-2004 11:28:42:011] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
[27-APR-2004 11:28:42:011] nsevreg: registering for 0x20
[27-APR-2004 11:28:42:011] nttmrd: entry
[27-APR-2004 11:28:42:011] nttrd: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttrd: socket 248 had bytes read=316
[27-APR-2004 11:28:42:011] nttrd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 7 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 7)...
[27-APR-2004 11:28:42:011] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevdansw: at STAGE 5
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=14, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
[27-APR-2004 11:28:42:011] nscon: doing connect handshake...
[27-APR-2004 11:28:42:011] nscon: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 316 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=316, plen=58, type=1
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes to leftover
[27-APR-2004 11:28:42:011] nscon: got NSPTCN packet
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0x860e
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsevdrcvreq: recving connect data
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=248, what=1, uflgs=0x4001, cflgs=0x0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=58, gtc=58, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nsrdr: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=258, plen=258, type=6
[27-APR-2004 11:28:42:011] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:42:011] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:42:011] nsdo: what=1, bl=248
[27-APR-2004 11:28:42:011] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:28:42:011] nsevdrcvreq: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsevdansw: exit
[27-APR-2004 11:28:42:011] nsevwait: event is 0x20, on 7
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsglfc: Assume establishing a connection...
[27-APR-2004 11:28:42:011] nsglfc: command = establish
[27-APR-2004 11:28:42:011] nsglauthorized: entry
[27-APR-2004 11:28:42:011] nsglecmd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: exit
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: entry
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: exit
[27-APR-2004 11:28:42:011] nsglb: entry
[27-APR-2004 11:28:42:011] nsglb: exit
[27-APR-2004 11:28:42:011] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:28:42:011] nlpcaini: entry
[27-APR-2004 11:28:42:011] nlpcaini: prg = oracle
[27-APR-2004 11:28:42:011] nlpcaini: arg[0] = oraclebuild
[27-APR-2004 11:28:42:011] nlpcaini: arg[1] = (LOCAL=NO)
[27-APR-2004 11:28:42:011] nlpcaini: exit
[27-APR-2004 11:28:42:011] nsbeqaddr: connecting...
[27-APR-2004 11:28:42:011] ntpcon: entry
[27-APR-2004 11:28:42:011] ntpcon: toc = 1
[27-APR-2004 11:28:42:011] sntpcall: entry
[27-APR-2004 11:28:42:011] snlpcss: entry
[27-APR-2004 11:28:42:011] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:28:42:011] sntpcall: exit
[27-APR-2004 11:28:42:011] ntpcon: exit
[27-APR-2004 11:28:42:011] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:28:42:011] nsglrespond: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=67, bl=161, what=10, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=258, gtc=258, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nscon: sending NSPTRF packet
[27-APR-2004 11:28:42:011] nspsend: plen=173, type=4
[27-APR-2004 11:28:42:011] nttmwr: entry
[27-APR-2004 11:28:42:011] nttwr: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttwr: socket 248 had bytes written=173
[27-APR-2004 11:28:42:011] nttwr: exit
[27-APR-2004 11:28:42:011] nspsend: 173 bytes to transport
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nstimarmed: no timer allocated
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=66, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsevunreg: cid=7, sgt=0, rdm=2
[27-APR-2004 11:28:42:011] nsrah: re-setting transport read mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing async mode
[27-APR-2004 11:28:42:011] nsevunreg: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsclose: closing transport
[27-APR-2004 11:28:42:011] nttdisc: entry
[27-APR-2004 11:28:42:011] nttdisc: Closed socket 248
[27-APR-2004 11:28:42:011] nttdisc: exit
[27-APR-2004 11:28:42:011] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:28:42:011] nsmfr: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsmfr: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsgldissolve: entry
[27-APR-2004 11:28:42:011] nsgldissolve: Deallocating cxd 0xd7c608.
[27-APR-2004 11:28:42:011] nsgldissolve: exit
[27-APR-2004 11:28:42:011] nsglrespond: exit
[27-APR-2004 11:28:42:011] nsglecmd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 6)...
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NT events set:
READ
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NS events set:
INCOMING SEND
[27-APR-2004 11:28:45:136] nsevwait: event is 0x2, on 4
[27-APR-2004 11:28:45:136] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:45:136] nsglhe: entry
[27-APR-2004 11:28:45:136] nsglrohe: entry
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=68, bl=8196, what=0, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=258, gtc=258, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsrdr: recving a packet
[27-APR-2004 11:28:45:136] nsprecv: 170 bytes from leftover
[27-APR-2004 11:28:45:136] nsprecv: tlen=170, plen=170, type=6
[27-APR-2004 11:28:45:136] nttmrd: entry
[27-APR-2004 11:28:45:136] nttrd: entry
[27-APR-2004 11:28:45:136] ntt2err: entry
[27-APR-2004 11:28:45:136] ntt2err: soc 296 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:28:45:136] ntt2err: exit
[27-APR-2004 11:28:45:136] nttrd: exit
[27-APR-2004 11:28:45:136] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:45:136] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:45:136] nsdo: what=1, bl=8196
[27-APR-2004 11:28:45:136] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglgrDoRegister: inst loads: ld1:51 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:28:45:136] nsglgrDoRegister: exit
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=67, bl=68, what=1, uflgs=0x2, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=170, gtc=170, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:28:45:136] nsdofls: DATA flags: 0x0
[27-APR-2004 11:28:45:136] nsdofls: sending NSPTDA packet
[27-APR-2004 11:28:45:136] nspsend: plen=78, type=6
[27-APR-2004 11:28:45:136] nttmwr: entry
[27-APR-2004 11:28:45:136] nttwr: entry
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nttwr: socket 296 had bytes written=78
[27-APR-2004 11:28:45:136] nttwr: exit
[27-APR-2004 11:28:45:136] nspsend: 78 bytes to transport
[27-APR-2004 11:28:45:136] nsdoacts: flushing transport
[27-APR-2004 11:28:45:136] nttctl: entry
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglroHandleError: exit
[27-APR-2004 11:28:45:136] nsglrohe: exit
[27-APR-2004 11:28:45:136] nsglhe: exit
[27-APR-2004 11:28:45:136] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:45:136] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:45:136] nsevwait: waiting for transport event (0 thru 6)... -
TNS-12500: TNS:listener failed to start a dedicated server process
Hello all,
I have recently applied a patch on apps tier, after which the concurrent manager is not up & running,
while viewing the internal log
im getting the below error
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Starting AVAILMGR Concurrent Manager : 25-NOV-2013 13:02:02
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager AVAILMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Process monitor session ended : 25-NOV-2013 13:02:02
========================================================================
Starting test_1125@test Internal Concurrent Manager -- shell process ID 25362
logfile=/d01/apps/testcomn/admin/log/test_test/test_1125.mgr
PRINTER=noprint
mailto=appltest
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 25-NOV-2013 13:03:01 -
Shutting down Internal Concurrent Manager : 25-NOV-2013 13:03:01
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The test_1125@test internal concurrent manager has terminated with status 1 - giving up.
WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)
can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.
Also in apps tier $TNS_ADMIN
the log says
25-NOV-2013 14:57:51 * ping * 0
25-NOV-2013 14:57:51 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=5147)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipeHI thanks for your reply,
I tried the above guide but dint helped me,
I tried modifiying Concurrent:GSM Enabled to N & concurrent manager started but all requests were in pending state not running so i reverted back to Concurrent:GSM Enabled Y
I ran autoconfig & this is the lastes error I am getting in internal manager log.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
The below is the log from $TNS_ADMIN log directory apps_test.ora
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.30.82)(PORT=13510)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:01 * ping * 0
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13512)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13514)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=13516)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe -
DB 9i - TNS-12500: TNS:listener failed to start a dedicated server process
hi all,
I have a problem with the following configuration oracle 9.2.0.1 (32bits) on Win server 2003 - enterprise x64 edition - 10GM of RAM.
I installed DB without problem, run server, started listener - seems all is fine. But when trying a remote connection, "listener failed to start a dedicated server process"
log listener -------
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=2100))(Presentation=FTP)(Session=RAW))
04-MAR-2010 05:31:04 * service_register * PRESS * 0
04-MAR-2010 05:31:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Administrator))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
04-MAR-2010 05:31:36 * ping * 0
04-MAR-2010 05:31:39 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRESS)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_1\bin\sqlplus.exe)(HOST=MMARFELLA-NB)(USER=mmarfella))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.103.28)(PORT=2838)) * establish * PRESS * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I ask You, because I am not too familiar with Windows environment and very likely I forget/miss something obvious (in this env).
Thanks in advance
MarfyI solved installing upgrade to 9.2.0.8.
Now It's all OK.
Regards
Marfy -
Impossible to start a listener: Failed to start service, error 3 TNS-12560
Hi all,
I had a database in my machine in 10g.
I have installed oracle 11.1.0.7 on the same machine.
So now i have 2 oracle_home.
With 10g I have a default listener which is running on port 1521.
I wanted to run an other listener under the 11g oracle home.
listener.ora:
# listener.ora Network Configuration File: C:\ora111\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = T0009696.corp.gltrade.com)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
C:\ora111\BIN>lsnrctl start listener2
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 16-MARS -2010 15:21:19
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Lancement de tnslsnr: Veuillez patienter...
Failed to start service, error 3.
TNS-12560: TNS : erreur d'adaptateur de protocole
TNS-00530: Erreur d'adaptateur de protocoleEven if I stop the 10g listener I can't start the 11g listener. I also tried to start a default listener with 11g (name=listener and port=1521) but I get the same error.
Please, can someone explain me the reason of such error ?C:\ora111\BIN>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ANT_HOME=U:\eclipse\plugins\org.apache.ant_1.7.0.v200706080842
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Fichiers communs
COMPUTERNAME=T0009696
ComSpec=C:\WINDOWS\system32\cmd.exe
ECLIPSE_HOME=C:\Program Files\Eclipse
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
JAVA_HOME=U:\JDK
JMS_ADAPTER=ActiveMQJMS
JMS_SERVERURL=tcp://SRV-JMS:61616
LOGONSERVER=\\SRV-46-CORP1
MSDevDir=C:\msdev\Common\MSDev98
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\ora111
oracle_sid=ubix11
OS=Windows_NT
Path=C:\ora111\bin;C:\ora111\bin;C:\ora102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Prog
ram Files\Fichiers communs\Adaptec Shared\System;c:\uti\exew32;c:\Perforce;c:\uti;C:\WINDOWS\system32\WindowsP
owerShell\v1.0;C:\Sun\SDK\bin;C:\Program Files\EclipsePATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
;.PSC1
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
PERL5LIB=C:\ora102\perl\lib\5.8.3\MSWin32-x86;C:\ora102\perl\lib\5.8.3;C:\ora102\perl\5.8.3\lib\MSWin32-x86-mu
lti-thread;C:\ora102\perl\site\5.8.3;C:\ora102\perl\site\5.8.3\lib;C:\ora102\sysman\admin\scripts
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 75 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=4b02
ProgramFiles=C:\Program Files
PROMPT=$P$G
PYDEVHOME=C:\Program Files\Eclipse\plugins\org.python.pydev.debug_1.3.13\pysrc
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
tns_admin=C:\ora111\network\admin
UBIXDEV_DRIVE=U
USERDNSDOMAIN=CORP.GLTRADE.COM
USERDOMAIN=CORP
USERNAME=EMB
UTI=c:\uti
Vs6CommonDir=c:\msdev
windir=C:\WINDOWS -
OWB 11g Listener fails to start
Hi,
I am running OWB11g on Windows XP 2002 SP2.
I get the following error when attempting to start the listener. This is preventing me from running the Repository Browser.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sys_MBurke>cd C:\oracle\product\11.1.0\owb\bin\win32
C:\oracle\product\11.1.0\owb\bin\win32>C:\oracle\product\11.1.0\owb\bin\win32\st
artOwbbInst.bat
C:\oracle\product\11.1.0\owb\bin\win32>call setowbenv.bat
08/08/05 10:37:44 WARNING: Application.setConfig Application: owbb is in failed
state as initialization failedjava.lang.InstantiationException: Error loading we
b-app 'owbb' at C:\oracle\product\11.1.0\owb\j2ee\owbb: Unable to find/read file
WEB-INF/web.xml in C:\oracle\product\11.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
05-Aug-2008 10:37:44 com.evermind.server.Application setConfig
WARNING: Application: owbb is in failed state as initialization failedjava.lang.
InstantiationException: Error loading web-app 'owbb' at C:\oracle\product\11.1.0
\owb\j2ee\owbb: Unable to find/read file WEB-INF/web.xml in C:\oracle\product\11
.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
08/08/05 10:37:44 Error initializing server: Error loading web-app 'owbb' at C:\
oracle\product\11.1.0\owb\j2ee\owbb: Unable to find/read file WEB-INF/web.xml in
C:\oracle\product\11.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
2008-08-05 10:37:46.273 WARNING J2EE JTA RecoveryManager is null during shut
down
08/08/05 10:37:46 Fatal error: server exiting
C:\oracle\product\11.1.0\owb\bin\win32>C:\oracle\product\11.1.0\owb\bin\win32\st
artOwbbInst.bat
C:\oracle\product\11.1.0\owb\bin\win32>call setowbenv.bat
08/08/05 10:44:36 WARNING: Application.setConfig Application: owbb is in failed
state as initialization failedjava.lang.InstantiationException: Error loading we
b-app 'owbb' at C:\oracle\product\11.1.0\owb\j2ee\owbb: Unable to find/read file
WEB-INF/web.xml in C:\oracle\product\11.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
05-Aug-2008 10:44:36 com.evermind.server.Application setConfig
WARNING: Application: owbb is in failed state as initialization failedjava.lang.
InstantiationException: Error loading web-app 'owbb' at C:\oracle\product\11.1.0
\owb\j2ee\owbb: Unable to find/read file WEB-INF/web.xml in C:\oracle\product\11
.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
08/08/05 10:44:36 Error initializing server: Error loading web-app 'owbb' at C:\
oracle\product\11.1.0\owb\j2ee\owbb: Unable to find/read file WEB-INF/web.xml in
C:\oracle\product\11.1.0\owb\j2ee\owbb (WEB-INF/web.xml)
2008-08-05 10:44:38.026 WARNING J2EE JTA RecoveryManager is null during shut
down
08/08/05 10:44:38 Fatal error: server exiting
C:\oracle\product\11.1.0\owb\bin\win32>
Any help much appreciated,
MarliseOWB 11.gR2 client does not run on Windows 64 bit :-)
There is a long thread about here: OWB 11gr2 on Windows 7 64
Good and clever people have hacked their way into making it work, but to my knowledge there is not yet a supported solution, other than running the client on a 32 bit os l.
A new patch have just been released for OWB11gR2. Search for patch: 13365457 on support.oracle.com
/Henrik
Edited by: HenrikVerup on Nov 22, 2011 3:22 PM
Edited by: HenrikVerup on Nov 22, 2011 3:24 PM -
ERROR:ORA-12500: TNS:listener failed to start a dedicated server process
I'm getting this error when connecting to an 8i database. The setup was like this: I had an Oracle 8i database on this server and i installed Grid Control on this server which also created a listener.
From Metalink, I saw the following note: A version 10 listener is required for an Oracle Database 10g database. Previous versions of the listener are not supported for use with an Oracle Database 10g database. However, it is possible to use a version 10 listener with previous versions of the Oracle database.
So I deleted the 8i listener and set up the 10g listener to service the 8i database as well. However, every time I connect to this 8i database, I see the listener refusing the connection. Anything I can do here?
Thanks.I probably have posted this earlier,
please configure the listener static.
In other words, ensure that 8i registers with 8i listener and 10g registers with 10g listener.
c:\blah\blah\8i\.\lsnrctl start listener8i
c:\blah\blah\10g\.\lsnrctl start listener10g
Read about how to Configure static listener? -
ORA-12500 TNS:listener failed to start a dedicated server pr
hi anybody
what's mean ora-12500??
I could invoked listener(lsnrctl80) success,but
I could not connect to database ,respond error message
ORA-12500!!!!
If you have any solution ,please tell me thanks
ps :database version :Personal oralce 8.0.3
nullIntermittent TNS-12500 Errors on Microsoft Windows NT
1. Increase the amount of memory available to the system
either by removing unnecessary processes or increasing
the amount of physical memory.
2. Increasing the amount of swap space will also
temporarily help relieve the symptoms.
3. Disable OTRACE. OTRACE is a tracing feature that can
cause many problems. OTRACE is enabled by default.
To disable OTRACE:
a. Stop the Oracle database.
b. Go to the orant/otrace/admin directory.
c. Delete all files with a .dat extension.
d. Restart the Oracle database.
4. The TNS-12500 can be a result of the 'processes'
parameter in the init<sid>.ora file being too -
Failed to start Oracle Net Listener using
hi
I ' trying to configure oracle 10g in ubuntu machine. I got the following errors like
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus
when ever i try to start oracle,i have got above issueya .... i hav found listener.log file.
Also when i try to run this cmd # sqlplus / as sysdba
i got following error like
Error 46 initializing SQL*Plus
HTTP proxy setting has incorrect value
SP2-1502: The HTTP proxy server specified by http_proxy is not accessible
also when i stop the listener and try try to restart it again ....i got error message like
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: error creating log stream /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
Linux Error: 13: Permission denied
Listener failed to start. See the error message(s) above... -
Failed to start Oracle Net Listener
Hi ,
can any body help me regarding failing of listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
iam using Fedore core4 installing oracle10g Express editon ,on standalone system,Below are the logs
sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 31 13:21:39 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name:
/etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
[root@localhost ~]#
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 31-AUG-2009 13:26:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 11: Resource temporarily unavailable
Listener failed to start. See the error message(s) above...
Please helpI need help please:
I have installed Oracle 10g Express Edition without struggles ( Little curious about the fact
that the directory /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/ is empty).
% /etc/init.d/oracle-xe configure --> worked good without default settings.
% /etc/init.d/oracle-xe start --> is silent : No verbose or messages in term.
I can't connect to server http://localhost:8080/htmldb or http://localhost:8080/apex.
I uninstalled and re-installed Oracle 10g... Now the command:
% /etc/init.d/oracle-xe configure --> Oracle is already configured.
But the connection to the server always fails.
My environment has all the following:
% uname -r
2.6.30.5-43.fc11.i686.PAE
% echo $ORACLE_HOME
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
% echo $ORACLE_SID
XE
% echo $PATH
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sbin.....
BUT I also had the responses:
% /etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
%sqlplus
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
% /etc/init.d/oracle-xe status
/bin/su: user oracle does not exist
% lsnrctl start { Messages below are my translations into english, sorry ;-) }
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 21-FEB.-2010 18:31:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Launch /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: Erreur de création de la chaîne de journalisation /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: Impossible to open journalisation file
SNL-00016: snlfohd : File opening error
Listening process failure. Read error messages above...
I wish someone here gives some tips (with the commands, I am an apprentice); I dont know
where to begin my checks.
Thx. -
Listener won't start (11g)
Hey all -
I have an 11g install on CentOS5. For some reason, the lsnctl command will not start. The following is the output:
LSNRCTL> start
Starting /opt/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /opt/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /opt/app/oracle/diag/tnslsnr/cm/listener/alert/log.xml
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12555: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00525: Insufficient privilege for operation
Linux Error: 1: Operation not permitted
Listener failed to start. See the error message(s) above...
I have the feeling that this is just some OS level permissions - at least I hope so!
The DB is started and open, and the ORACLE_SID is set properly. I am using the "oracle" user created during the install to start the DB and strart the listener.
Here is the contents of my lsitener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rampod2.jsc-rampod)(PORT = 1521))
TNSPING reveals no listener (of course).
Edited by: armeck on Aug 28, 2009 9:32 AMOk, that got me somewhere... the listener started!
But...
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 28-AUG-2009 09:39:25
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /opt/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /opt/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /opt/app/oracle/diag/tnslsnr/cm/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.7)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.7)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 28-AUG-2009 09:39:25
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /opt/app/oracle/diag/tnslsnr/cm/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.7)(PORT=1521)))
boldThe listener supports no services*bold*
The command completed successfully
I do need APEX to load, and would like EM as well. -
My LISTENER won't start. Please help!
I am not sure why i keep getting the following error.
Here is the error msg when i try and start my listener.
[oracle@dina admin]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 07-JAN-2008 10:40:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /home/oracle/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /home/oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /home/oracle/app/oracle/product/10.2.0/db_1/network/log/listener.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dina.dhcp.2wire.com)(PORT=1521)))
TNS-12560: TNS:protocol adapter error
TNS-00583: Valid node checking: unable to parse configuration parameters
Listener failed to start. See the error message(s) above...
Here are the contents of my listener.ora file:
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dina.dhcp.2wire.com)(PORT = 1521))
My $ORACLE_HOME variables are set correctly. I am able to bring up the database instance. Just can't get this listener started and don't have the slightest clue why.You may want to try this:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dina.dhcp.2wire.com)(PORT = 1521))
)And make sure dina.dhcp.2wire.com can be solved against an IP. On the other hand, it seems like you are getting your IP from a dhcp server. Even though you could start your services, it is advisable to use a fixed IP address or have a loopback adapter properly configured, otherwise you may face configuration issues with the EM DB Control Console.
~ Madrid -
Failed To Start A Dedicated Server Process
Hi
Oracle 9.2
Windows Advanced OS
6G Ram
We switched our server from Shared Server to Dedicated. All was going well, but suddenly no one could log in. Currently logged in users were okay.
Alert Log showed several of the following errors:
skgpspawn failed:category = 27143, depinfo = 9261, op = spdcr, loc = skgpspawn
No errors in the listener.log
Attempted login with sqlplus reported ORA-12500: TNS:listener failed to start a dedicated server process
At the time less than 2G of the 6G was being utilized.
Also, during the time of this event, the event log showed several of the following:
Event Type: Error
Event Source: Oracle.ACP
Event Category: None
Event ID: 31
Date: 5/16/2008
Time: 9:48:59 AM
User: N/A
Computer: ACP
Description:
Unable to begin another thread.
Any help would be appreciated.
kdHi Don
Thanks for the info. I now have the 3GB switch set. I have been leery of setting the indirect buffers due to some posts I have read like these:
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
Cause: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
Action: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters.
ORA-07305: ksmcsg: illegal database buffer size.
Cause: The database buffer size must be a multiple of the extended cache mapping size for indirect data buffers to be used.
Action: Verify that the db_block_size parameter is correct in INIT.ORA, or disable the use_indirect_data_buffers parameter.
I'm assuming these are 10G and above errors, but I just don't know.
Our db cache is already at a fairly large size.(see non standard configs below).
Also, is this an either/or thing. In other words, /3GT OR /PAE and indirect buffers, but not both?
Thanks again.
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 1350
sessions = 1490
resource_limit = FALSE
license_max_sessions = 0
shared_pool_size = 268435456
shared_pool_reserved_size= 26214400
large_pool_size = 369098752
pre_page_sga = TRUE
enqueue_resources = 124
dbwr_io_slaves = 2
control_files = E:\orant\admin\OR8i\control1\Contrl1.ctl, E:\orant\admin\OR8i\control1\Contrl3.ctl, E:\orant\admin\OR8i\control2\Contrl2.ctl, E:\orant\admin\OR8i\control2\Contrl4.ctl
db_block_size = 8192
db_keep_cache_size = 16777216
db_cache_size = 503316480
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = E:\orant\admin\OR8i\arch
log_archive_format = ARC%S.%T
log_buffer = 65536
log_checkpoint_interval = 0
log_checkpoint_timeout = 1800
db_files = 254
db_file_multiblock_read_count= 8
dml_locks = 2000
transactions_per_rollback_segment= 3
max_rollback_segments = 700
rollback_segments = roll_1, roll_2, roll_3, roll_4, roll_5, roll_6, roll_7, roll_8, roll_9,
remote_login_passwordfile= EXCLUSIVE
license_max_users = 0
global_names = TRUE
shared_servers = 0
max_shared_servers = 0
session_cached_cursors = 25
utl_file_dir = *
job_queue_processes = 2
background_dump_dest = E:\orant\admin\OR8i\bdump
user_dump_dest = E:\orant\admin\OR8i\udump
max_dump_file_size = 50240
sort_area_size = 1048576
sort_area_retained_size = 65536
db_name = EMR
open_cursors = 450
optimizer_mode = CHOOSE
Maybe you are looking for
-
Installation failed when using Jumpstart Server to install SUN Netra T1 200
I have a problem to install a couple of Sun Netra T1 200 Servers with a Jumpstart Server. The Jumpstart Server is set up and I have executed the add_install_client Script. If I boot the Server which should to be installed the server crashes after get
-
Is it possible to update only a part of my apps
Hi, I would like to upgrade my apps, but my iPad2 writes that I don't have enough memory. Is it possible to upgrade only a part of the apps? In the appstore, you can chose either all of them or nothing. Thank you!
-
Hi All, We have Oracle 9i Rel2, with OLAP and data miming option. The documents available in the net doesnt cover basic information on the installation/configuration/usage stuff. Can any one point me to a location (not oracle documents), where there
-
Values of same Variable(used in diff reports) shud be retained in a session
Hello, We have an application cockpit. There are 12 to 13 different reports being used in that cockpit. Most of the reports use the same characteristic variables in the report. When we used to execute these reports in Ver 3.x, the variables used to r
-
Before, in Lion and previous version of OSX, I could leave my password "blank" in my email accounts under Mail preferences so that when I sign in I have to type in my password for my email account. I do this for security purposes as other people use