Multiple programs stalling and unresponsive

multiple programs stalling and unresponsive

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Multiple programs open at start up: iTunes, Calendar, email etc...? Why and how do I fix it? Thanks!

When I boot up my computer multiple programs open??? Just started doing it a while back. Not sure why or what changed. It's as bad as having a PC now ;-) Any help on how to fix this problem would be greatly appreciated. Thanks

Launch System Preferences and click on the “General” icon
At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

R12 - Multiple programs to be submitted in supplier remittance and bank trf

in 11i, the AP payment programs was set up such that a custom SQL program is triggered during "Bank Transfer" and "Supplier Remittance" processes
The custom SQL program has a logic to submit multiple reports for each process. E.g. Supplier remittance has a "Covering letter" followed by another program for the actual supplier remittance
How do we acheive this in R12 using PPR and payment formats? Since in R12 only layouts can be modified, how to submit multiple reports / concurrent programs for each process ?

Hi
Thanks for the response.
But there are some cases where there are 3 and also 4 programs submitted as part of payment process. In 11i this was achieved by submitting an SQL based program which in turn submitted multiple programs.
How to submit 3 or more programs using PPR or payment process profile features of R12 ?
regards,

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

What is the best spec to run multiple programs with photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?

What is the best spec to run multiple programs with numerous photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?
For a Macbook Pro. What's the least amount I need to process, upload, download images using these 3 programs?
Thank you.
pt

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

I have multiple programs downloaded from Creative Cloud, but when I try to download after effects and Audition it downloads to 42% and stops.

I have multiple programs downloaded but cannot download Audition or After Effects for some reason.

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Refer to EX11. You are running out of disk space somewhere most likely.
Mylenium

Firefox slow and unresponsive with facebook and zynga and then locks up for all other tabs open

I finally had to uninstall the beta 4 version as I couldn't take the issues any longer. The browser would become slow and then totally unresponsive mostly when using facebook and zynga. however, all tabs would become slow and unresponsive and would have to be rebooted. It wouldn't be 5 minutes and it would have to be done again. Even without facebook/zynga loaded in a tab, the entire browser is unbelievably slow. I am running mac os x 10.5.8.
I went back to the old version until I hear back as I just don't have time to sit and wait and wait and wait only to have to reboot the program constantly.

I found a "work around". I installed Incredible Bookmarks 0.7.3. That allows me to add an additional Bookmarks Toolbar without causing the bouncing problem.
Putting bookmarks in the IB bar was a little tricky. It allows customization, but only to the extent of choosing bookmarks by topic or by a subdirectory of the Bookmarks Menu. What I actually put on the toolbar are such subdirectories (or folders), so I normally could only put one at a time. (This problem doesn't exist with the Firefox Bookmarks Toolbar, which allows you to copy subfolders, not just individual bookmarks).
I solved the problem by moving the additional folders I wanted to put in the IB Toolbar into a folder I (cleverly) called "IB Toolbar", then selected that for the actual Toolbar. The result: a row of folders, exactly what I wanted. (Actually, it's a second row of folders, since I still have the original Firefox Bookmarks Toolbar.)
I'd still prefer MultiRow, but that doesn't appear to be working with Firefox 3.6.18 and higher, so until I upgrade to Firefox 5 (and see if the Plus version will work) this will have to do.

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

ITunes 10.5.2, windows 7, and Unresponsive Exit

I recently bought a new computer, but I have had this issue on both with the latest iTunes update. I can execute the program without a hitch, the first time. It works completely normal. The issue is when I close iTunes. The program remains in the background, although appearing to be closed, AKA it is still running in the proccesses section in the task manager. However, after I close the program, iTunes becomes unresponsive. So, anytime I try to re-execute the program again, it never starts. When I manually close out iTunes via Task Manager Processes, and/or all other apple components, it starts iTunes, but becomes unresponsive again while loading the program. If I restart my computer, it is back to normal, but only the first execution of the program. My question, is this a software issue with iTunes, a program conflict with some third party program, or something else that I can do something about? I have found a lot of troubleshooting FAQs regarding execution of the program, not exiting. Not sure of the terminology regarding this response, so I cannot find a search for this specific issue. So any help here would be greatly appreciated. I just don't want to be forced to restart my system everytime I want to restart iTunes.
PS: I have also tested this on a winXP comp, and it has the same issue.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Disk usage seems to cap at 50% - System stalls and freezes.

Model: Samsung Series 7 Chronos (NP700Z5C-s03CA)
Manufacturer: Samsung Electronics
Processor: Intel(R) Core(TM) i7-3635QM CPU @ 2.40GHz
Installed Memory (RAM): 8.00 GB
System Type: 64-bit Operating System, x64-based processor
Windows Edition: 8.1
This issue has been happening for a while now. This is my "gaming laptop" and I currently
only play WoW. Yet even with my settings turned as low as I can get them my computer halts, stalls and completely freezes.
I've noticed that my computer NEVER goes above 50% disk usage. Almost as if its capped at 50%. And when it reaches 50% is when my
problems begin. Normally these programs have most of the usage when it randomly starts freezing at 50%.
- svchost.exe Service Host: Local System (Network Restricted)
- svchost.exe Service Host: Local Service (Network Restricted)
- IAStorIcon.exe IAStorIcon (32 bit)
I guess my issue is why is my disk usage capped to 50% and how do I fix this so it can utilizes all 100% ?

"How did you check your disk usage?" I open my task manager
and look at it. http://imgur.com/ZtDUk1A
http://imgur.com/ffj37IU
Ran the "chkdsk" here is the results.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>chkdsk
The type of the file system is NTFS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
Stage 1: Examining basic file system structure ...
312576 file records processed.
File verification completed.
2842 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
374016 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
30721 data files processed.
CHKDSK is verifying Usn Journal...
34898944 USN bytes processed.
Usn Journal verification completed.
Windows has scanned the file system and found no problems.
No further action is required.
950891520 KB total disk space.
95164032 KB in 126881 files.
72396 KB in 30722 indexes.
0 KB in bad sectors.
444304 KB in use by the system.
65536 KB occupied by the log file.
855210788 KB available on disk.
4096 bytes in each allocation unit.
237722880 total allocation units on disk.
213802697 allocation units available on disk.
C:\WINDOWS\system32>chkdsk c:
The type of the file system is NTFS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
Stage 1: Examining basic file system structure ...
312576 file records processed.
File verification completed.
2842 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
374016 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
30721 data files processed.
CHKDSK is verifying Usn Journal...
35081856 USN bytes processed.
Usn Journal verification completed.
Windows has scanned the file system and found no problems.
No further action is required.
950891520 KB total disk space.
95217124 KB in 126944 files.
72404 KB in 30722 indexes.
0 KB in bad sectors.
444304 KB in use by the system.
65536 KB occupied by the log file.
855157688 KB available on disk.
4096 bytes in each allocation unit.
237722880 total allocation units on disk.
213789422 allocation units available on disk.
C:\WINDOWS\system32>

PO to accept multiple GL codes and cost codes

PO to accept multiple GL codes and cost codes. Since the system POs are not accepting more than one GL code and Cost code, this functionality is not being used for some of the service providers like Car Hire, Air ticket vendors, Stationery vendors, Utility vendors.
Is there anything to releated to field selection ?
is there anyway to upload the excel file in case if I have more than 1 G/L and cost center during PO creation
Thanks in advance

HI
Yes the setting will let you use multiple account assignments.
If you need to upload alot of PO's in this way then the best way is to use the BAPI - BAPI_PO_CREATE1.
This will help you in craeting any number of line items witha nay number of account assignments.
LSMW and BDC will not be able to control the table structures being used.
Please take help of ABAPEer in bulding the program using the BAPI.
Thanks & Regards
kishore

When opening a pdf link the process stalls and there is a message that Adobe acrobat reader is running. to the best of my knowledge I do not have the reader. I have an older version of Acrobat Pro. How can I fix this?

when opening a pdf link on a web poage the process stalls and there is a message that Adobe acrobat reader is running. To the best of my knowledge I do not have the Acrobat reader. To the best of my knowledge I have deleted the reader program. I have an older version of Acrobat Pro. The problem occurred before I did the deletion and continues since then.

Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529

Photoshop and Word Projects Stalling and or Freezing

Ironically, this problem I'm going tod escribe has happend twice since I started to submit it at 6:10 am and again at 7:09 am this morning. Luckily, I copied it befoe closing Safari and restarting:
Recently I've noticed that my Mac is not running as efficiently as usual. In particular, it has been stalling while I am working in Photoshop or MS Word (or as just happened again, inSafari). Although I usually can get it moving again without restarting — just by clicking on either the desktop or Safari, my guess is that it will only get worse with time unless I fix the problem. Since some incidents are immediately followed by a report from Safari, I've assumed that emptying its cache and trashing its preferences are the obvious places to start, but am embarrassed to admit that although I've searched everywhere (including inside the preference folder in the Library), I can't find either item.
Basic information about the MAC, Safari, MS Word and PS is as follows:
The MAC: The basic 21.5" desktop Mac . . . ( 2.7 GHz Intel Core i5 /OS 10.8.3) . . .just celebrated its first birthday last month. Although the desktop is filled with files and folders, "About This Mac" shows that 863.5 GBs of its 999.356 GBs are still unused.
Safari: Version 6.0.3 (8536.28.10)
Adobe Photoshop: CS6; version 13.0 x64
MS Word: Mac 2008; version 12.3.2
I realize there's at least one OS update for the Mac, but have opted to ignore it, because I believe in the old saying, "If it ain't broke, don't fix it" — and when it comes to the update, it fixes apps I don't use. MS Word also was re-released just after I bought my current Mac. Not knowing when it would reach the stores, I contacted MS to see if there were any other versions (newer than the one that came with Office 2008) that were compatible with Mac OS 10 and they recommended the downloadable upgrade (available when I called) for which I was still eligible . ..and which has worked perfectly until now.
One problem with these stalls and freezes is that on those occasions when just clicking on the desktop or Safari does not work, I have to restart PS or Word. Luckily, when I do, all open documents are recovered, whether previously saved or not. But if they weren't saved, when recovered, they are listed with document numbers but no names. Since I usually don't want to break my train of thought by stopping to stop resave them with names before returning to the project I was working on when everything stopped, the list of recovered files gets longer exponentially — probably slowing down the working speed of the apps even further.
I recognize the need for better "housekeeping," but need to know if anything else has to be corrected first — and if so, how to attack it.

Having a lot of files on a Mac desktop can slow it down, though I don't think it would cause it to lock up in just a few programs. I think you'd more likely see it no matter what program you have open.
Download & run Etrecheck: http://www.etresoft.com/etrecheck
Post the results of its scan here - it just looks through your machine and reports back with details of the hardware and software that are on the machine.
~Lyssa

Multiple programs recording from same sou

Hi, I have a audigy and I cant use the record function in multiple programs. Like, when im using the teamspeak and try to open skype, just the teamspeak can record from microphone and skype dont work.
Any help, thank you.

You would have to close your DAQmx reference in one vi before another vi could open one on the same DAQ device. You could have some sort of flag variable, maybe a LV style functional global, that would signal the need for DAQ use. Some sort of arbitration scheme in a separate vi would determine who gets priority over DAQ use. It would then send signals (more funtional globals) to each subvi telling them who should close and who should open. The differenct vi's would have to coninually poll the functional globals to see if they should open or close their session. This will be quite complex.
- tbob
Inventor of the WORM Global

Multiple programs stalling and unresponsive

Similar Messages

Maybe you are looking for