Multiple Quizzes in a project with Branching

Hello,
I am creating a project with branching - based on some
criteria, a user will take a path that will not bring them back to
a common quiz at the end. Each path should have its own quiz in the
end. How do I make only one of the quizzes' results to be counted
on the LMS?
For example, the course is about a certain process and based
on my role, at some point I will choose a path that teaches me how
to do my part of the process. At the end, I will be asked questions
for my part only and I want to see the scores on the LMS only for
that one quiz.
Thank you!

Hi.
I'm very interested in the branch-awareness feature.
Here's my scenario (in a nutshell).
People are attending ONE event out of 4 in different geographic locations. A, B, C, D.
Each event has several sessions that are elective. People can go to any combination of sessions they'd like within those available at the event. Let's say sessions X, Y, Z for simplicity's sake.
Each session has a series of questions to test retention. Let's say questions *1, *2, *3 for now.
All in ONE quiz file.
1. Learners access the quiz and its introduction page.
2. Choose the first event, in this case event C.
3. Land on the event C landing slide that contain links to first questions of each session.
4. Select session Z.
5. Land on first question of event C, session Z.
6. Answer (submit) questions Z1, Z2, Z3 from that session CZ.
7. Go to the event C main menu (upon submitting the Z3 question and "continue"). This is an alternate event C menu that contains a slight modification: now a "Those were all the sessions I attended, take me to the quiz results page] + links to other sessions branches for event C.
8. Depending on the choice on step 7, learner chooses another session's series of questions OR is taken to the final quiz results page. Score is computed at an 80% passing score ONLY counting the questions that HAVE been answered, not all the other questions in sessions not attended.
Does this make sense? Will it work on Captivate 6 via branch-aware quizzing?
Thanks.

Similar Messages

Multiple Quizzes in One Project

I'm developing a project that teaches 4 different standards,
then has a overall assessment quiz at the end of the course.
The problem I'm running into is that the "pre" quiz after
each of the four standards cannot be independently "scored" without
adding to the total score for the project. It's as if you can only
have one quiz total slide per project, and that total slide can't
be duplicated for individual quizzes.
Any suggestions? I guess I have to break up each of the
standards into their own projects, then present the final
assessment as another independent project.
Thanks
JimmyD

Welcome to our community, JimmyD
I think you are spot on. There is currently no way within
Captivate to have multiple quizzes in the same project. I'm not
even sure if that would be possible from a technical standpoint.
But I've seen a few folks ask about it here. Because of that, I
would strongly encourage you and anyone else that sees a need for
this capability to alert the Captivate Development team by
completing a Wish Form.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Is it Possible to have multiple customer on the projects with 100% contr

Hi Dina,
Can you please help me out in understanding the scenario where you have more than 1 customer with 100% contribution so that you can invoiced them individually with respect to their agreement?
I also wanted to know the significance of check box - Customer At Top Task and -Invoice Method At Top Task on Revenue and Billing Inforamtion Screen.
Thanks

Hi
Invoice Method governs the billing method, the way you generate invoice to the customer.
Oracle's Projects Billing support the following methods -
WORK - the system calculate the bill amount of each expenditure item based on bill rates or burden. The billing amount is saved on RDL(Revenue Distribution Lines) of the expenditure item . The invoice includes summary of the RDL's.
EVENT - The invoice includes multiple lines, a line per each billing event. Events are fix amount records. An event can be entered manually through the form, interfaced from external system or generated automatically based on customizable billing extensions.
COST - It is a particular case of EVENT, where Oracle redelivered a billing extension that calculates invoice amount based on the percentage of actual costs from total approved cost budget.
Usually, the invoice method is selected on project level, on the same place you set up the project revenue method.
For billing, you have the option to set up the invoice method separately at top task level. This feature allows you to generate a T&M invoice (WORK) from expenditures rolled up to one top task, while billing a separate invoice by fix price events entered on other top task.
Dina

Multiple Lesson Course- Separate projects?

I just realized that you cannot have multiple quizzes in one project, and am hoping for some advice. I have a course that has many lessons, with a quiz at the end of each lesson. Originally I planned on it being one big project, but that can't happen because of the quiz restriction. Should I make each lesson its own file? Is there a way to link them together with a table of contents like I was planning on? Any suggestions??
Thanks!

Hi.
I think Aggregator can solve your problem very well.
Steps:
1. Create Captivate projects, one for each of your lessons(containing Quiz at the end). Publish them and generate each of its SWF files.
2. Create a new Aggregator project from File>New>Aggregator project.
3. Add these SWFs to your Aggregator project.
4. Publish the Aggregator project.
This would give you a single SWF/EXE file, which would contain all your lessons listed in the TOC, with their own quizzes.
Thanks
Chinmay

How can I make multiple quizzes with their own results slides within one project of Captivate 7?

In one Captivate 7 project I want to create multiple quizzes with their own results slide.
Currently I have 5 quizzes that all are linked to 1 results slide.
Is there a way to give each set of questions their own results slide?
(I saw a response to a similar question for Captivate 5 from 2012, but I couldn't get much use out of is and I figured there was an easier way in Captivate 7).
Any help would be appreciated!
Thanks!

Thanks for the reply Lilybiri!
I checked out the link and it's useful, however your other plan might work better for me:
Either you link to separate CP-files that have each their quiz, or you can show intermediate results slides (see link below), but you have to know that the score that will be transmitted to a LMS is the total score of all the quizzes.
But how exactly do I link separate CP-files? Do I have to publish them first and then link them, or can I link them before I publish?
If you could shoot me a link or some advice I'd greatly appreciate it. I'm finishing up a huge project that is due at the end of the day and this quiz issue is one of the last things keeping me from being finished.
Thanks!

How can I make multiple quizzes within one Captivate project?

Hi guys! Really liking Captivate 5.5, especially the way random question slides can lift questions out of a question pool...very elegant!
Sadly though, I've come up against a bit of a wall. In my project, I want to have 3 separate quizzes that all use the same question pool; a 10, 30 and 50 question-long quiz. Each one needs to have its own results page.
It's easy enough to see what I mean by looking at the screenshot below:
The idea was to have about 105 slides in total, with slides 10 - 20 being the 10 quiz slide, 21 - 51 being the 30 question quiz and 52 - 102 being the 50 question quiz.
There are three invisible buttons placed over those 10, 30, 50 text boxes. In the picture, the '10 question' button would jump to slide 10, the '30 question' button would jump to slide 21, and the '50 question' button would jump to slide 52, jumping the user to the start of their designated tests.
Though I can create the 10 random question "block" easy enough, when it comes to adding the 30 question "block" it just adds the new random questions to the existing random questions. I want three separate quizzes, each with their own results screens please. (I don't want to daisy-chain to external projects, because the results of each test need to be used within the homepage.)
It just adds them on to the existing block!! Argh!!
Little bit ticked off with Adobe...the reason their products are so incredible is because they put no constraints on the user, and you can use their tools to create things even the developers never dreamed of. Like in Photoshop for example, I bet when the dropshadow fx was created, the developers never realised that it would be used to give a metallic 'stamped' look to text by turning it to white and applying it just inside the text.
Captivate, though amazing most of the time, has a nasty habit of stomping on my toes. You can't set grade boundaries and have quizzes give out grades A+ to F- for example. You can only have 'pass' and 'fail', thus making it rather pointless for use in schools, contrary to how the program is advertised. Another example would be when I wanted to create a replay button. I thought that a button that jumped to the slide it was on would be a simple, no-BS replay button, but for some reason you can't make a button jump to its current slide. I downloaded a widget that worked in the end, but I wish Adobe would get off my back and let me do what I want!
Anyway, if you could help me out here it would be grand

I must say I have a little sympathy for the Captivate developers on this occasion. As you say, they've created an application that does so much, that when you eventually run into a hard boundary of some kind, the effect is somewhat jarring. However, every application, no matter how good, has limits. I'm probably one of the worst offenders when it comes to asking the Adobe Captivate Development Team for enhancements (I think I've logged over 70 enhancement requests for Captivate 6 alone).
In your case, you want to have three different quizzes in one project file, each with it's own separate Quiz Results page. Lilybiri's blog explains how to set up your own faux Quiz Results pages using system variables and custom user variables, but you're going to find this to be quite a lot of trouble. Even if YOU want to consider these as three separate quizzes, as far as Captivate is concerned they're just one big quiz with 50 questions. So Captivate will calculate it's internal results based on a 50 question quiz, even if your users select the 10 question version. So achieving a final Pass/Fail result is going to be problematic at best.
As Lilybiri suggested, your better strategy would be to break this up into separate modules so that you can get your three separate quiz results (all done in standard Captivate) as well as correct results based on the actual number of questions done by the user.
As far as grades A-F is concerned, there's nothing to stop you from using Advanced Actions and User Variables to calculate the user's score as a grade. You need a user variable that stores the user's grade (e.g. var_Grade). And you need a fairly complex Conditional Advanced Action (e.g. caa_CalculateGrade) with several clauses each of which goes something like:
If
cpQuizInfoPointsscored is lesser or equal to [highest score for a particular grade]
AND
greater or equal to [lowest score for a particular grade]
Actions
Assign var_Grade with [the appropriate grade for that range of scores]
Your conditional action will need one of these clauses for each separate grade. Once your variable has been assigned a grade based on the user's score, you can display it in a text caption somewhere on the quiz results page or on a slide thereafter with suitable commendations/ commiserations.

Is it possible to link data across different/multiple PWA sites leveraging Master Project with the Subprojects feature?

A couple different questions /similar scenarios
1) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at a third (or X) site (http://server/pwa3)
2) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at one of the original sites (http://server/pwa1 (for example))
OR is there a better way to do this/more preferred way to do this.
We found this (http://social.technet.microsoft.com/Forums/projectserver/en-US/2379c3f2-6c80-46d7-8eac-3bc2ccb2d908/master-projectsubproject-with-sites-in-pwa-2010?forum=projectserver2010general)
but its not what we're looking for
3a) Issue/Example -
We want to set up a site (http://server/pwa100) for just the president of the company - all the schedules of the subsites (/pwa99 + /pwa98) create a feed into an integrated master schedule/master project with subprojects(located
in /pwa100).
3b-1) We also want to set up sub sites (http://server/pwa99 and
http://server/pwa98) for each division VPs (and specific other people). These two sites would only allow specific user's project files to be viewed by each other...
Can their project files have linkages between the two project sites (/pwa99 and /pwa98)? Meaning if user1 logs in to /pwa99 can he see a project file (given that they have permission) from /pwa98 in the same instance?
3b-2) Can they see the project file in ProjPro and/or PWA ???
3c) is it possible to have:
+ /pwa100 (pres)
++/pwa99 & /pwa98 (two vps)
+++/pwa97 & /pwa96 & /pwa95 & /pwa-etc (minions)
each rolling up to the next level (level 3 rolls up to level 2 which can roll up to level 1)

kbwrecker,
I agree with Dale. Having multiple sites will make this difficult to set up.
Not knowing how your Custom Groups/Categories have been set up, have you looked into using the "Project Permissions" feature to share projects. These permissions are 'additive' to the category permissions, so you could start out with people looking at the
projects they are authorized to via categories, and then let them share/add people as needed basis. This will also satisfy the requirement of not-loading the projects with resources..
And finally, the department and categories need not align, except that when projects from one dept are shared t another dept resource, the visibility of custom fieds will be affected.
Hope I did not go off on a tangent there :)
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
Meant to get back to this earlier - your answer is close (because its what we currently do..sort-of)
From my understanding of this issue the users are separated by department and can only see specific projects; however, when they try to share departments between users (so they can see their projects (dept a sees dept b projects)) this works - but there
is a bigger issue/main issue.
main issue: when dept B adds a new project dept. A cannot see the new project in dept B.
This can be eliviated by removing the user/s and re-adding them to the permission structure of the deptment but overall doing this several times based on user/s and projects being added it gets to be cumbersome and just plain annoying.
Any help/additional thoughts would be great

Multiple Quizzes with multiple results (in Captivate 6)

Hey guys, Thanks for reading!
Does anyone know if it is possible to do multiple tests with multiple results in captivate 6? or if it is possible to have a pre-test with a quiz, and have separate results for each?
I've been having a play with captivate 6 and when I put a quiz in, it overrides the results slide for my pre-test.
Looking at the results slide master properties I can choose to have results for one of my quizzes but not both (even on separate slides):
It wont even let me insert another slide based on the other result.
I would like to know if multiple quizzes with multiple results is possible in Captivate 6?, or if I am simply doing something wrong?
Thanks!

Sorry for way-late reply...
It's really more how your LMS handles 'courses' and the terminology it uses.
Essentially, most often, a 'SCORM Package' (SCO) is a 'course'. I'd rather call each SCO a 'lesson' as, to me, 'courses' should be setup in the LMS with a series of 'Lessons'.
Regardless of the terminology, each 'SCO' is launched by the LMS and one score can be recorded for it via SCORM.
So if you need multiple final scores recorded, each of those final scores need to be in their own SCO.
A common approach is a Pre-Test SCO (or 'lesson', or 'course', whatever term), a 'Content' SCO perhaps with some interspersed scored interactions, and a Post-Test SCO...all three merged together as a 'course' (or whatever term) within the LMS.
That said, as said, it really all depends on how your LMS handles various SCOs...
Clear as mud?
E

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

How do I create a NetBeans project with multiple JavaFX (FXML) dialogs?

I'm very new to Java and JavaFX, so forgive what is probably a question asked a thousand times, but I can't seem to find the answer.
I come from a Visual Studio (C# with WPF) background. I'm used to creating a Solution then adding a Project for each dialog/window that gets included in the Solution. Each dialog/window is a class derived from Window, and I simply create an instance of that class when I need to use the dialog.
What I need to do is have a main window (stage) that contains two lists of participants (a red team and a blue team).
Then I need a separate dialog for entering the information for the participant. So when a button on the main stage is pressed ("Add Red Participant"), I want to open the ParticipantDialog. When the "OK" or "Close" button on the Participant dialog is clicked, I want the dialog to be able to return a participant object to the main stage.
Then the main stage adds that participant to the appropriate list.
What I've gathered so far is that I will be creating an FXML file for the Participant dialog (and I assume an associated controller). Then when the "Add" button is pressed, I will call an FXMLLoader to load that FXML dialog. Something like this:
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("ParticipantDialog.fxml"));
Scene scene = (Scene)fxmlLoader.load();
final Stage participantDialog = new Stage();
participantDialog.setScene(scene);
First question is: is that correct so far? Am I at least on the right track?
Next question is: how or where do I create the FXML and controller files for the participant dialog using NetBeans? Should I create a separate project to make the participant dialog and then copy those files over, or is there a way to make the files within the parent project? And if I make the participant dialog in a separate project, what's the easiest way to access it from my main stage?
I feel like I'm missing something simple here because this seems a lot harder than it should be.
Thanks in advance for any advice.

> is that correct so far?
Yes the sample code you have is fine to launch a new dialog when your Add button is pressed .
> I create the FXML and controller files for the participant dialog using NetBeans?
You can edit FXML text in NetBeans, but I think that is kind of tedious.
You might want to create the FXML using SceneBuilder.
You can use SceneBuilder in NetBeans.
You may want to get it working without FXML first.
For example, use the JavaFX scene graph API, then convert your program to use FXML once you are more comfortable with the JavaFX system.
The piecemeal approach cuts down on the amount of learning you need to do at one time.
> Should I create a separate project to make the participant dialog and then copy those files over.
No.
Just use a single NetBeans project.
You will have separate FXML files for your main stage and your participant dialog, but they will both be placed in the same NetBeans project.
> is there a way to make the files within the parent project?
In NetBeans 7.3.1, do the following:
File | New Project | JavaFX | JavaFX FXML Application
This will create a sample project with a sample fxml file.
Modify the sample project files to get what you want, changing the sample fxml to your main stage fxml and adding a new participant fxml to the same directory.

Debug Multiple Flex Projects with shared PHP project

Hi ! I have a problem debugging Flex/PHP applications.
I have many Flex projects with a shared PHP project, so I need to set the the output folder to the Flex project's folder, not the PHP's project folder.
But it doesn't work, I mean the application works great, the PHP are executed fine, the AS3 code is debugged fine, but I can't debug PHP.
If I put the output folder to the PHP's project, then I can debug the PHP code too.
Please, can you tell me if it's possible to put the output folder to another folder than PHP's project???

Hi Steven,
Yes, I considered this option too.
But if someone creates in the database a column for a table that belongs to "Project A", when I publish "Project B" the generated script tries to remove the column since my copy of "Project A" on my solution is not the latest
version.
I think I'll just have to handle this. Like, organizing with people when and ho can publish to the databases.
Maybe the best practice is to developers use their own LocalDB while developping and only one person publish to database on the development server.

Loading project with multiple libs.execs error

I used workshop to create a project with several shared libraries and several executables. Things were going along just fine until I quit and tried to re-load the project. Now I get the following error:
"${PATH}/Foo.prd", line 448: Error Object ""Foo.so"" used in assignment has not been defined.
Error: Internal consistency error in "../src/prdparse.cc", line 1105.
I have see one other post on this error but it did not have any replies.
Thanks for any help I can get!

I'm working on a java project divided in 2 packages
"test" and "agentslibrary".I'm working on a project divided into roughly 200 packages.
I have to retrieve some results frome some classes
(even in different package).So? No difference to classes in the same package, apart from the import.
Now I am using static methods to do this,What does static have to do with anything?
but I have
some problems and getting some nullpointer
exception.Then you have bugs in your code.
Which is the best way to do it?
Moreover I have a class("myagent") which extends
another("agent"). From a main class I instanciate
"myagent" but when I try to use a get method inside
Agent (the superclass of the class I just
instanciated) , I get a nullpointer error.Probably because you implemented something incorrectly. NPEs have nothing to do with packages or the "static" keyword or whatever.

Multiple Quizzes using Captivate 3

I am currently using Captivate 3 and I had a very large project with multiple quizzes. Captivate was able to go through the first quiz, but every time I hit another quiz, the system would freeze.
I am looking to do multiple quizzes - does anyone know a work around????
Thanks!
Jess

Hi there
A bit of clarification if I may...
Linking to the .CP file is only the right thing to do if you constructed your links using the "Open other project" option. If you used the "Open URL or File" option, you wouldn't link to the .CP file. You would link to the .HTM page.
.CP files are project source files and you should never see them on the server.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple Quizzes - Captivate 4

Hi,
I was wondering if there is any way to create multiple quizzes in Captivate 4 in the same project file. I have a learning styles survey based quiz set up, and need to collect 3 varibles, one for auditory, visual, and kinesthetic. Then I want to display the total for each variable at the end of my quiz, having each question containing 3 answers each for the specific categories/variables. So basically is there a way to have 3 objective ID's, one representing each quiz, then having each specific question adding a specific point to that quiz ID. Then on the last slide display a total point system one for each objective ID, so the user can see which category they fit into. Or is there another way to do this, ie. keeping track of 3 answers instead of just true/false?
Thanks!

Hi,
I don't need it published on an LMS, I just want to show the results in Captivate on another slide, after they take the quiz. For example some of the questions are:
You      are preparing a technical learning module for the next month:
You       make lots of gestures with your hands while you think.
You       draw up a diagram to help you clarify a few key ideas.
You       prepare a detailed plan of the content of the module.
You      are getting ready to write up work for the course you are taking:
You       are surprised by the pile of paper.
You       feel tired before you begin.
You       regret waiting until now to get the work done.
I want to score them as follows:
Question
Visual
Auditory
Kinesthetic
1
B
C
A
2
A
C
B
Then I want a total of each category, at the end of the quiz. Would I be able to do this is Captivate? Thanks!

Multiple Quizzes in a project with Branching

Similar Messages

Maybe you are looking for