Multiple R/3 Systems and Design

We have 3 R/3 Systems. System 1, System 2, System 3 and they are all sending PO's to our Vendors.
How should I design the Above R/3 systems in SLD and also in Repository(Should I need to create one Software Component and underneath should I need to create 3 scenarios OR should I need to create 3 separate Software components? The adavantages and Disadvantages?) If there is any PDF that narrates the above scenario
[email protected]
Thanks

hi,
>>>Have would suggest u to have 1 SWC.
why?
those 3 r3 systems can have completely different interfaces so why mix 3 different systems in
one SWC ?
only because they are from the same software provider ?
Regards,
michal

Similar Messages

  • AC 5.3  Logical systems and multiple Physical systems

    HI all:
    We have set up a Logical System, and then have hooked up 2 Physical systems to it.  Based on the documentation from SAP, the rule set (and the way we set it up) is at the Logical system level. 
    Physical system #1 is reporting the correct results, however, Physical system #2 results are not complete.  My understanding is that both Physical systems should be drawing from the rule set based in the Logical system.
    Results:  Physical system #1 - correctly identifies 10 risks
                  Physical system #2 - incorrectly only identifies 5 of the expected 10 risks.
    Role assignment to user is exactly same, authorizations are exactly the same.  The User/Role/Profile Full Sync has been repeated as part of troubleshooting.
    Has anyone experienced this?  I'm looking for ideas/options on where to investigate why the results are different.
    Thanks
    Margaret

    HI:
    Thanks for answering!!  I'm having trouble understanding the answers, sorry.
    When you have a logical system...you upload the rules once to that system, and generate them.  Then when you set up a physical system and hook it up to the logical system...the 1st, 2nd or 3rd physical system....they all use the same ruleset.  The whole concept (as I understand) is that the use of Logical and Physical systems...and putting the rule set on the Logical system so you don't have to worry about one rule set taking precedence over another, is an advantage, if this is possible (ie: we don't have multiple rule sets).
    Where should I be checking that the risks are defined properly?  The rule set is the delivered one from SAP.  The functions and risks match what we had (plus more) in the CC 4.0 system.
    The first physical system we set up (example: Development) works fine, and all regular SoD risks are coming up as expected.  When we added another system (example: Test)...the results of SoD analysis were incomplete. 
    Does that help clarify?  Perhaps I'm just missing something?
    Margaret
    Edited by: Margaret Sokolov on Apr 28, 2009 4:34 PM

  • Learning systems analysis and design

    hi folks ,
    i am a developer , but i do not know anything about systems analysis and design
    and i wanna know about it because i want to develop applications on my own
    so , i need to learn systems analysis , to begin developing the application
    is not there any free reference i can learn from , is not there a documentation for that ?
    could you help me please ?
    thanks in advance

    Hi
    Systems Analysis is a big subject. I can remember doing a 6 week full time course, back in the 80s. However, as a starting point, just google 'Systems Analysis' and take a look at sites such as:
    http://www.comp.glam.ac.uk/pages/staff/tdhutchings/chapter2.html
    In addition, the help within Oracle Designer is not bad, even if it is from an Oracle slant.
    Good luck

  • Centralised EHS system and users and organisations in multiple SAP systems

    Wanted to have your experience/ advice or experience in setting up a centralised EHS system talking to multiple SAP systems and other ERP systems
    If the client have sister companies and locations in multiple SAP systems , can we go for a centralised EHS system talking to multiple SAP systems
    Is there a concept of application ID in EHS system : If so how EHS system can identify the < to EHS system records to tag the system > , <EHS system Records bound to have different configs for each ERP systems> and < from EHS system records to multiple SAP systems >
    Can you list client experiences or roadblocks for this type of design

    Hello
    the answer to your question is: may be you can use a central EHS system. The reason is: EHS is correlated with MM. A SAP system in which EHS is used without MM makes "not realy" sense. So it is a matter of definition "what is a central EHS system".
    EHS it selfs uses SAP standard techniques. That is "ALE" distribution to other SAP systems. The distribution of EHS data top NON SAP systems is possible to via XI (which is the common solution). If you use as the scenario SAP to SAP you must make your that standard EHS customizing is the same on both sides.
    Furthermore SAP EHS is a "great" module with several submodules. So regarding each of the potential scenerios you need to check the necessary prerequisites. It ois very common to have EHS PS, DG, HSM in one system and to distribute data via ALE to a different system so that the EHS data can be used "decentral" in the several SAP logistic processes.
    In most cases you need to distribute per ALE at least DG master and hazardous substance master.
    As a starting point take a look here: http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
    BASIC Data and Tools => Tools => Distribution of specifications, phrases and reports per ALE.
    Hope this helps.
    With best regards
    C.B.

  • Need someone to install Co server 4 and design delivery system

    Hi Guys.
    I am investigating Adobe Content Server 4 as a delivery platform for eBooks. I currently operate an eBook retail business but would like to move into the distribution/wholesale side of things.
    I am finding it difficult to locate anyone who has experience with the software both in terms of installing the software and designing the delivery side of things as well.
    So, I thought I would come to the experts!
    Basically, I need someone experienced to outline to me what the process of installation involves as well as a rough estimate of time and cost of same. I would also like them to describe how they would develop an efficient and easy to understand integration process with interested retail websites for safe and secure delivery of the Epubs and PDF's.
    All this would be with a view to awarding the best candidate the contract to implement their plans.
    I realise peoples time is valuable, so I assure you I am not here to waste time or effort, and I would appreciate the same from any applicants. I require only serious individuals/companies who have already installed or are currently installing the content server.
    Thank you in advance for your time.

    Hi,
    I think I can help.
    I'm an independent consultant building systems around Adobe Content Server 4 and around Adobe InDesign.
    I have 17 years experience working for Adobe which included development roles in the InDesign and Digital Publishing groups (and others, but it's really the Digital Publishing group that is of interest here.)
    You can get in touch with me at [email protected] My web site is http://www.tripleshotsoftware.com, and my LinkedIn profile is here: http://www.linkedin.com/in/paulnorton.
    Thanks,
    Paul Norton
    [email protected]

  • Multiple BW systems and "unbundling" into 1

    Hi
    We have recently started implementing BW 3.5 running on HP TRU64 o/s and are unable to upgrade to higher version without changing our hardware as any further development on TRU64 ceased in Dec 2005. BW reports are delivered through windows based EP6.0.
    Right now we are about to commence implementation of a portals based HR solution on ERP2005 and EP7.0 and reporting will be BW based using BW7.0 (NW2004s) which is required to deliver the solution we require. All of this will be running on a separate environment (except EP which we will upgrade from 6.0 to 7.0).
    Regarding BW, SAP have suggested that we run BW7.0 for HR as a separate instance on the HR server. This sounds appealing to us as we can buy a medium size server now for HR and BW with the view of unbundling BW-HR and including it back on our central BW system once we upgrade the hardware and BW version. This will give us additional capacity on the HR side due to the expected growth in the organisation in the next 3-5 years.
    Is it possible to unbunble the BW-HR system and incorporate it back into our other BW system? What challenges / problems are we going to face.
    Thanks
    Geoff

    Hi Fahed,
    Welcome to SDN !!!
    I think we can have 2BW systems to a source system but the logical system name shouldn't be similar.
    You are only allowed to change the logical system name if the system is not connected to other systems, as changing the name would render the connections to all connecting systems useless.
    for more information go through this link..
    http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Hope this helps...
    Best Regards,
    DMK
    *Assign points if it helps...

  • Multiple Client Systems and Multiple Repositories

    Hello,
    The client I am working on is insisting that we create two repositories and connect one repository to an R/3 system, and one to an ECC system.
    Can this be done?! I keep insisting that this is against the basic principle of MDM to have 'one single version of the truth' and that having different data in different repositories is not true MDM.
    Can this even be done? Or can it be done if each repositories hold the same data?

    Hi Nichole,
    I agree with Shiv that this totally depends on your business requirement. You can have two repositories if there is business requirement, only need to be taken care of Sizing. As you are keeping the same data in two repositories rather than one so as per performance you should take care of required memory, hard disk size etc.
    e.g. There are scenarios where sometimes as per business requirement you have to create different repositories as per region. Like one for Europe, other for US etc.
    Regards,
    Mandeep Saini

  • MVC model in Web systems and applications

    MVC model in Web systems and applications
    Object-oriented design model is experience, MVC idea is a user interface for the original. This article discusses how the major application areas in the new Web design patterns and the use of MVC framework. The article first introduced the concept of design patterns and characteristics, and MVC architecture design concepts and analysis of the MVC framework contains several key models. Based on the characteristics of Web applications on how to use patterns and MVC framework made some design ideas.??
    1. Introduction
    1.1 design model
    Object-oriented technology and the emergence of software applications has greatly enhanced the trusted and software quality. Object-oriented programming than previous models to various programming simple and efficient, but the object-oriented design methodology than the previous design methods to complex and much more skill, a good design should be both on the issue of gender, but also to take full account of the problems and needs sufficient interoperability. In the past 10 years, people in the object-oriented technology and the practical application of research to explore certain issues in relation to the creation of a number of good solutions, the so-called object-oriented design patterns. Object-oriented technology is one of the purposes of enhancing the software trusted, and to design model, design programmes in important positions from a deeper sense of meaning and essence embodies trusted. There are many people in the design model definition, which cited Christopher Alexander is the largest design model definition : Each design model is a tripartite rule, which expresses a contextual environment (Context), a problem and a solution. Design models generally following basic elements : model name, the purpose solution effect 1995-1998 code and related design models. There are several classifications design patterns can be divided into a model based on the purpose (Creational), structural type (Structural) and the type of behaviour (Behavioral) three. It is mainly used in the creation of a model-based object model-based structure to deal primarily with the category or combination of objects, used to describe behavior-based model is the main target for the category or how stress and how to allocate responsibilities. Design patterns can be divided into categories based on the scope and target mode model type model dealing with the relationship between the categories and sub-categories, these relations through the establishment of succession in Translation moment to be finalized, are static. Model is targeted at addressing the relationship between the moment of change these relations in the operation, more dynamic. Model features : through the experience acquired in a structured format to write down, avoid encountering the same problems on the first design, exist in different abstract level, in continuous improvement, can be trusted artificial product for the design and best practice in the world to be combined to address larger issues.
    1.2 MVC framework
    MVC was first used in a user interface Smalltalk-80 China. M representative models Model, representatives maps View V, C representatives controller Controller. MVC trusted code with the aim of increasing the rate of data reduction expressed, the data describing the operation and application coupled degrees. Also makes software Keweihuxing, restorative, expansionary, flexibility and packaging of greatly enhanced. Single-user applications are usually incident-driven user interface to the organizational structure. Staff development tool with an interface painting of a user interface interface code based on user input and then prepare to implement the corresponding moves, many interactive development environment encouraged to do so, because it emphasizes first and then a functional interface. Some software design model is the strategy that will be fixed before the code into the regular system of the final. Result is that the procedures and organizations around the user interface elements in the user interface elements of those moves, data storage, applications and functions of the code is used to indicate the way intertwined. In single-user system code structure can be so, because the system will not demand frequent changes. But for a large system such as large Web systems, or e-commerce systems to be applied. Model by incorporating data from a variety of access and control data can be separated to improve distributed system design. MVC design pattern is composed of three parts. Model is the application object, no user interface. Type in the screen showing that it represents the flow of data users. Controller user interface definition response to user input, the users responsible for the action against the Model into operation. Model View data updated to reflect the adoption of data changes.
    2. MVC design pattern,
    An MVC framework for the design of the system includes many models, but with MVC is most closely related to the following three models : Observer, Cambridge and Strategy.
    2.1 Observer models
    MVC through the use of purchase / notification form and the separation of the Model View. View to ensure that their content accurately reflected Model and state. Once Model content changes, there must be a mechanism to allow notification to the relevant Model View, View can be made relevant at the appropriate time updating of data. This design is also more general problems can be solved, the target separation, making a change to the target audience affect others, which targets those who do not know the details of the object being affected. This is described as Observer in the design model. Model type : Observer model is the object-oriented model, it is behaviour-based model. Model purposes : definition of hierarchical dependence relations between objects, or when a target value of the state change, all its dependent relationship with the object are notified and automatically updated. There are a variety of data may show a way, in different ways and may also show. When a way through a changed data, then the other should be able to show immediately that the data change and do accordingly.
    Effect :
    1. Abstract coupling. I only know that it has a target audience of some observers, the observers met each abstract Observer category simple interface, does not know their specific affiliation categories. This makes the coupling between goals and observers smallest and abstract.
    2. Support radio communications. Needless to notify designated observers goals, how to deal with the observer informed decisions.
    3. Possible accidents updated. We update logic, avoiding mistakes updated.
    2.2 Faculty model
    MVC is an important feature of View can nest. Nest can be used for any type of combination of local maps available, but also management of type nest. This thinking reflects the type and mix of components will be equal treatment design. This object-oriented design ideas in the area of Cambridge has been described as a design model. Model types : Cambridge model is the object-oriented model, it is also the structure type model. Model purpose : to target portfolio into tree structures to express "part-whole" level structure. Prepared for the use and combination of individual target audiences with the use of consistency.
    Effect :
    1. Definition of a target portfolio includes simple objects and the structure of the category level. Simple objects may be complex combinations of objects, and can be targeted portfolio mix. This customer-code used in the target areas can use simple combinations target.
    2. Simplify customer-code. Needless to know their customers - a mix of target audiences is a simple target or can use these items in a consistent manner.
    3. Easier to add new types of components. New components can easily be changed to a combination of customer-targeted codes.
    2.3 Strategy model
    Another important characteristic is the MVC can not change the View of changes View response to user input. This often requires a change in response to the logic of the system is very important. MVC to respond to the logic involved in the Controller. Controller of a category level structure could easily change to the original Controller appropriate, a new Controller. View Controller son used to achieve a specific example of such a response strategy. To achieve different response strategy, as long as examples of the use of different types of replacement will Controller. Also in the running time by changing the View Controller for users to change View of response strategies. This View-Controller relationship was described as an example of Strategy design pattern. Model types : Strategy model is the object-oriented model, it is behaviour-based model. Model purposes : definition of a series of algorithms, and their packaging, and ensure that they can replace each other, making algorithms can independently use its customer-change.
    Effect :
    1. Strategy category levels for Context definition of the relevant algorithms can be trusted or behaviour.
    2. Alternative methods of succession. If the direct successor Context, with different acts will be added Context act, the realization of which would algorithm mixed up with Context, Context hard to preserve and expand, but can not dynamically changing algorithms. Will be enclosed in a separate Strategy category algorithms to enable algorithm independent Context change easily cut over expansion.
    3. Can provide the same acts different date.
    4. Strategy-must understand what customers between different.
    5. Context and Strategy communications between costs.
    6. An increase in the number of targets.
    3. MVC in Web application system
    Now some of the distributed systems such as Web-based B2B e-commerce system, suitable for use MVC framework. Through analysis from the perspective of high-level applications can be a target divided into three categories. Category is shown for the target audience consists of a group of commercial rules and data, there is a category that is receiving requests to control commercial target to complete the request. These applications often need to change is shown, such as web style, color, but also need to demonstrate the contents of the display. And the business rules and data to be relatively stable. Therefore, said that the frequent need to change the View objects that the business rules and data model to be relatively stable target, and that the control of the Controller is the most stable. When the system is usually issued after the View objects by artists, designers or HTML/JSP system managers to manage. Controller target applications development personnel from the development and implementation of rules for commercial and business development personnel from the target data, database managers and experts in the field of common completed. Show in Web?? or customers - control logic can be Servlet or JSP, dynamically generated Html. Generally used Servlet better than using JSP. JSP will be better with the Html code of separate codes for page designers and developers of separation efficiency. Servlet and JSP can complete all complete functions, actually JSP eventually converted into a Servlet. And control of the target system exists in every level, the coordination of cross-layer moves. Contain business rules and data objects exist in the EJB layer (EJB-centred model) or Web?? (Web-centred model).
    3.1 View in the Web application system
    View of the system shows that it fully exist in Web??. General by JSP, Java Bean and Custom Tag. JSP can generate dynamic web content using Java Custom Tag easier Bean, but it can show the logic of packaging, and more conducive to modular trusted. Some well-designed in a number of JSP Custom Tag can even be used in different system duplication. Model for control of JSP and Java Bean objects. JSP through Java Bean objects to retrieve the data model, the Model and Controller object is responsible for updating the data on Java Bean. In general, can we devise all possible screen that users can see all the elements of the system. Based on these elements, to identify the public part of passive components and dynamics. Can consider the use of templates means to separate the content generated JSP public, also need to change their generation Html or JSP from a JSP templates to dynamically introduce these different parts (include methods). Another issue to consider is screen option, when dealing with End users request template automatically available to show that the concern that users must know what is the screen components. So can consider all screens on the definition of a centralized document, such as a document or text document java. Taking into account the possibility of changes in future document definition screens, the best use of text documents such as a XML document, so future changes to the recompilation. According to the URL and user input parameters to shine upon the results of a screen, of course, likely to be made on the basis of the outcome of the implementation of actions to choose different results screen. Therefore, the need for a request for matching resources with document (XML), if a URL request several different results, it must specify in the document need to control the flow (a controller object), as well as the corresponding screen different flows.
    3.2 Model in the Web application system
    Model objects represent business rules and business data exist in EJB layer and Web??. In J2EE norms, the system needs some data stored in the database, such as user account information (account model), the company's data (company model), some not recorded in the database. If a user browsing the current catalogue (catalog model), the contents of his shopping (shopping cart model). Which one of these models exist in the data according to their life cycle and scope to decide. In Web?? a HttpSession and ServletContext and Java Bean objects to store data in the EJB layer is a data storage and logic EJB to. Web?? the Java Bean objects stored in the model layer model of the EJB object data copy. Because there are many different EJB tier model targets, so Web?? through a ModelManager to control the EJB layer object model in ModelManger background model can be used for packaging methods. In the EJB layer and the rules have all the data into EJB model is inappropriate. If the database can visit the Dao object model into objects. Dao can be encapsulated and the specific details of the database in the world, if we can write a different table, a number of databases, or even multiple databases. If the orders can be a model for OrderDAO, it may have to deal with Order table, table and OrderItemLines OrderStatus table. Value can also consider the use of targets. Value can be a target of securing long-range targets, because every time the remote object attributes could be a long-range redeployment process will consume network resources. EJB objects in the distance can be used instead target. In the distance, one-time items to be targeted instead of the value of all attributes.
    3.3 Controller in Web application system
    Coordination with the Model View Controller object to the request of users into the system to identify incidents. In Web?? generally a MainServlet (or Main.jsp), and receiving all requests, it can use screen flow management devices (ScreenFlowManger) decided next screen. There is a general request processors RequestProcessor contains all requests are needed to be done to deal with logic, such as the request translated into system events (RequestToEvent). Acting processors usually also includes a request for ClientControlWebImpl, it is logical to deal with the EJB layer in Web?? Acting. In EJB layer, a layer for EJB tier Web ClientController provide the CD visit. Another StateMachine used to create and delete ejb handle Web?? sent to the incident. Controller Another important function is synchronous View and Model data. ModelManger contained in a ModelUpdateManger, it puts events into a Model System assembly that all the needs of synchronous Model, and then notify Listeners do synchronous operation.
    4. Concluding remarks
    In recent years, with the Internet technology development and the emergence of new business models, the Web is based on a large number of applications. On how to design these systems architecture, and gradually there has been some convergence of opinion, the most important point is that its structure should be rational in the open. Demand than ever faster development of technology and design concepts, systems for the future, the cost of upgrading the smallest, research software systems architecture still very useful and necessary.

    Bravo. And your point is?

  • [Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

    As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
    Step 1: Create a task to schedule an image backup with following command:
    SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
    Step 2: Schedule a robocopy to backup the saved image with BAT file:
    Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
    Write following batch file to copy backup and rename with backup date:
    *****************BAT********************
    @echo off
    robocopy e:\test1\ e:\test2\ test.wim
    ren e:\test2\test.wim  test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
    NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
    This BAT can also help to rename the copy of image backup with date and time like below:
      3.  Set up a basic task in Task schedule:
    Note: please make sure the time you configured follows the time you set for image backup in Step 1.
    Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
    At the end, you can know more about SCHTASKS and Robocopy via following links:
    Robocopy
    http://technet.microsoft.com/en-us/library/cc733145.aspx
    Schtasks
    http://technet.microsoft.com/en-us/library/cc725744.aspx
    Welcome to your feedbacks.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi,
    Thanks for posting in Microsoft TechNet forums.
    I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Regards,
    Kelvin Xu
    TechNet Community Support

  • Multiple Monitors with T440p and Pro Dock

    Hello:  I recently recieved my new business computer from our company offerings.  I got a T440p with the Pro Dock station.  Previously I had something similar that I got two years ago.  On the old system I was able to connect three monitors to the docking station (VGA, Digital, Display Port) and I could use any two at a time.  On the new system, if I plug anything into Display Port (even with that monitor turned off), the Digital port becomes disabled.  So I can't seem to use my "any two of three monitor" scheme without unplugging in one and plugging in another to the docking station.  Is there another solution for this? Thanks.  mbb.

    According to this: http://support.lenovo.com/us/en/documents/pd029622 I also have a Pro-dock (judging from the port layout) and it should be possible to use 3 monitors in any combination. But I can't get windows to activate VGA, DVI + Display Port. I got VGA + Mini Display Port + DVI working, but not reliably: When undocking and using the laptops build-in monitor, the multi display configuration can become invalid. Getting this configuration to work is a hassle, as multiple tries are needed and the configuration information in the Intel configuration dialog is wrong and the one in windows is ambiguous. Configuring Display Port + VGA works with-out problems. Display Port + DVI is difficult to achieve. Any help is approciated.

  • Sound in system and Rhythmbox is scratchy and skips

    Two problems. Since a few hours ago, the sound on my system and in Rhythmbox has been *extremely* scratchy. I'm playing mp3 files through Rhythmbox, and in the system, the terminal beep is also quite scratchy. However, the scratches aren't present in Totem. I'm just using the standard ALSA configuration, I believe, since I don't remember installing anything special to make my sound work.
    I thought it might have been a simultaneous playback issue, because although I don't *play* sound in multiple apps at once, I often have several apps that utilise sound open (e.g. Totem, Rhythmbox, etc.) I changed my /etc/asound.conf file to this, based on the wiki. This is my /etc/asound.conf:
    # Use PulseAudio by default
    #pcm.!default {
    # type pulse
    # fallback "sysdefault"
    # hint {
    # show on
    # description "Default ALSA Output (currently PulseAudio Sound Server)"
    #ctl.!default {
    # type pulse
    # fallback "sysdefault"
    # vim:set ft=alsaconf:
    I thought maybe the update today broke this, but I don't know how to check which packages were updated today using pacman (or perhaps looking at modification times on files in /var/lib)?
    The second problem is my sound skipping, in every application. This has been happening for several days. I checked the wiki and found that this problem can occur with a speaker system not being configured properly by the system, so I opened alsamixer to check the levels, as shown: Master (43), Headphones (100), Speaker (96), PCM (99), and Mic/Micboost, S/PDIF, and Beep are all muted. However, I still get skipping and scratchy noises even if I use headphones or my laptops normal speakers, without the speaker system plugged into the 3.5mm.
    My audio controller is the built-in Intel device in my Lenovo SL510:
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    Subsystem: Lenovo Device 20f2
    Flags: bus master, fast devsel, latency 0, IRQ 47
    Memory at f2a00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Any ideas for what I can check to figure this out?
    Last edited by pythonscript (2012-07-03 02:17:48)

    Thanks Bengt and Chris,
    I have all of the updates for all of the relevant applications,ie iMovie 6.0.2 and QuickTimePro 7.1.
    I am aware of the problems that using the wrong sound format can cause and never use the 12khz setting.
    I do not think it is a hardware problem, such as external HDs or other externals, because, I can fire up FCP and capture the same clips from my camera with no change other than quitting iMovie and booting FCP and the sound is perfect.
    Thank you both for your input, I am really stumped here. I have been doing video on my Macs with since the early 90's when a 2gigabyte HD cost me over $2500 Australian and never had anything like this.
    Back in those days the biggest problem was getting anything captured at all, perhaps I have become lazy and accustomed to things "just working".

  • My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

    my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

    If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

  • Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

    PROBLEM: Premiere CS5 - Project Monitor playback is jerky
    This had NOT been an issue prior to reinstalling the operating system and all software.  I have read numerous articles on the forums and have tried everything I can find...with no results.
    STEPS TAKEN TO RESOLVE THE PROBLEM:
    I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
    I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
    I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
    I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
    I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
    I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back. 
    Since I have 96 GB of RAM, I don't use a pagefile.  A zero MB page file is the same setting I had prior to rebuilding the C:  Regardless of whether I have a pagefile or not, the problem persists.
    I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project  - the problem persists.
    Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up.  I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me.  Keep in mind that the System drive is a solid state drive.  Anyhow, I had no choice but to dive in and reinstall everything.  I wiped the system partition of the SSD using quick format and started installing the operating system.  Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr.  Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
    SYSTEM CONFIGURATION:
    The Operating system and all software is installed on C:
    All data files and most profile related folders are stored on D:
    C:\ (one Intel Solid State Drive - SYSTEM DRIVE)  Used Space: 57.5 GB  Free Space: 388 GB
    D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
    Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
    Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
    System Manufacturer    Intel Corporation
    System Model    S5520SC
    System Type    x64-based PC
    Video    NVIDIA Quadro FX 4800 driver v.320.78
    Display        Dell 27" LCD (DisplayPort)
    Display        Dell 27" LCD (DisplayPort)
    Processor    Intel(R) Xeon(R) CPU           X5680  @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
    Processor    Intel(R) Xeon(R) CPU           X5680  @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
    Installed Physical Memory (RAM)    96.0 GB
    Page File Space    0 bytes
    PREMIERE PRO CS5 SETTINGS:
    Monitor PLAYBACK RESOLUTION: Full
    Monitor PAUSE RESOLUTION: Full
    (regardless of this setting, the problem persists)
    PREFERENCES:
    MEMORY:
    Installed RAM: 95.9 GB
    RAM reserved for other applications: 10 GB
    Optimize rendering for: Performance
    (Changing this setting to 'memory' does not resolve the problem)
    MEDIA:
    Media Cache Files
    X - Save Media Cached files next to originals when possible
    LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
    (User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab.  This is the same configureation I had prior to rebuilding the C:\drive.  Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
    Media Cache Database
    LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
    PROJECT SETTINGS:
    Scratch Disks
    Path: D:\Users...\My Documents\
    General
    Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
    (Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
    If any of y'all have any other suggestions, I'm all ears.
    Thank you.

    I'VE RESOLVED THE PROBLEM!
    PREFACE:
    OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too). 
    If you've read my post above, you've seen all the steps I've taken to resolve the problem.  I've read many posts, some of which have mentioned  hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem.  I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe.  Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle). 
    In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM.  bla bla bla, puke...whatever.  Bottom line is this:
    It's not a software issue.  It's not and Adobe issue; and Gawd no!  It's NOT a PC vs. Mac issue!  HA HA.  The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
    SOLUTION FOR ME:
    Download and install the updated drivers for the motherboard.  Mine is an Intel Workstation Board S5520SC.  Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating.  A very handy, time-saving tool!!!  Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
    The scan revealed two Intel drivers needing an update:
    Intel Chipset
    Wired Networking
    and one non-intel driver:
    Creative Labs Sound Blaster X-fi
    I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
    If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard. 
    ROOT CAUSE:
    While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
    Peace

  • Can Power Users or Mgt Create and Design Reports Through Query Designer ?

    Dear BI consultants,
    Iam new to BI.
    My management has requested me to Train Power users from All Modules(FICO,HR,QM,PP,SD,MM) to Create Queries and Design Through Query Designer.
    My question is are we suppose to Give query Designer Access to Power users or Mgt so that they can create Queries and reports by themselves.Please Suggest me wht is the Best Practices.
    is it feasable to train power users and Mgt as to how 2 create queries. will there be any side effect on the System or our end.
    Plz suggest.
    wht are the advantages and disadvantages of this.
    If I train the Power users then is there any risk of my Job.
    since they will be creating all reports by themselves.
    wht else can a BI consultant do since iam in a support project.
    how do i convince my Mgt?
    Plz Suggest.
    Thanks Awaiting

    This is common procedure maintained in most of the company's for end users.
    There is no issue if you train the power users.you will be the first point of contact if they have any doubts.and more over you are supporting for your client right? this can't be handed over to power user or end user. data is imp for the client so there will not be any problem for you, if any issue comes while loading you need to take care of the errors and fix the.
    power users or end user will be familiar with Business requirement not with the Query building logic's not with the BW procedure so no worries for you.
    as vineeth said its better to keep control regarding the global and key things at your end so that you will not loose contol on the reports.

  • CS Print system and ML 10.8.2

    My university is using CS Print (formerly sold by http://universities.cbord.com/solutions/) which I run in my 27" iMac/Mountain Lion labs on WindowsServer 2003 Dells to provide the means for students to swipe their ID cards and pay for printing. We use HP printers.
    We've been using this system for a few years now, and originally getting it set up in the first of four labs nearly required a team of NASA and Cal Tech engineers an entire semester to make it work (I only exaggerate slightly). I was not involved in choosing this particular workflow, but have to somehow keep it running with the help of several people.
    The early problems with this system involved students needing to authenticate multiple times on the Mac (running Snow Leopard) before the job would show up on the Dell's screen. If I changed toner in the printer or had to reboot it or the Dell, that somehow reset the system and the next person to print would need my admin password entered to unpause the printer. That would usually fix the problem for the entire lab.
    We've also had students' cards give a bogus "no funds" error (or say they were many thousands of dollars in the negative), or (even to this day) the print system charges a single 10 cents regardless of number of pages printed.
    My current biggest problem running Mountain Lion 10.8.1 and now 10.8.2 involves each workstation saying the printer is paused and a print operator needs to enter a password. Doing so every time someone prints is obviously impractical, but once done, it's like an enema for the print cue and a long list of jobs builds on the Dell's screen. At that point sometimes people can print the jobs, sometimes not.
    The authentication problem returns repeatedly, even on the same workstations where the admin password was entered, and is causing everyone exasperation.
    As a Mac person I have no patience with obsolete POS Windows software, but as I said, this is what our campus uses.
    I would like to hear anyone else's experience with CS Print and how one deals with the authentication errors, especially. I understand Pharos.com makes what looks like a viable alternative (UniPrint) and would like to hear from those using it so I can pass on the info.
    PS: Lion seemed to have issues with network logins which I solved by going to Mountain Lion. But even ML 10.8.2 still "Addresses an issue that may prevent Active Directory accounts from being locked out". I wonder if this is part of my problem?

    Similar pause issue here, running on 10.8.2, authenticated against a Windows 2008 server, with mostly HP's on campus, and only HP's having this issue. We use PaperCut to monitor and charge for printing, however.
    We're still testing, but an upgrade of the firmware on our printers has helped thus far (two days). Worth a shot.
    Please keep updating - I feel better knowing we're not the only ones!

Maybe you are looking for