Multiple range in select option

Hi,
I have to give four ranges for Gl account at the time of data selection. so could you please tell me how can I do this.
For exa : 1.(2111 to 2222) or
              2.(2333 to 2444) or
              3.(2555 to 2666) or
              4. (2777 to 2888).
Regards,
Amar

Hi,
ranges: r_fieldname for tablename-fieldname.
r_fieldname-sign = 'I'. "including
r_fieldname-option = 'BT'. "between
r_fieldname-low = '2111'.
r_fieldname-high = '2222'.
APPEND r_fieldname.
Clear r_fieldname.
same way append 2333 to 2444, 2555 to 2666, 2777 to 2888
Thanks,
Krishna..

Similar Messages

Multiple records in select options-Urgent help

Hi all,
Iam using the following function module to get the set values. I need to pass multiple values in select options(ie) select options with no intervals. to the function module parameter Shortname. I have declared the variable which has to be passed as
S_SETID FOR SETHEADER-SETNAME NO INTERVALS.
The problem is when i use S_SETID-LOW the value is passed to the function module , but if multiple data is entered in the input then how to pass all the data to the function module. Please Help.

Hi,
Declare the Range in the Function module , then you can pass that Select-option fields to that ranges and use that in the Function module.
Or you can use the RANGE_C8 for the Select-optios in the Function module, you can declare the Internal table with the type of RANGE_C8 in the tables parameter, then pass the Select-option to this Internal table
If you want more length field then search based on RANGE_* then you will get all the Range Structure.
Regards
Sudheer

Multiple records with select option

i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name from sm35, the table from where data is retrieved is APQI, i have used a parameter before using select option ,like:
selection-screen begin of line.
parameters: P_grpid like apqi-groupid.
select-options: s_grpid like apqi-groupid.
selection-screen end of line.
AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
{the code starts
FM F4 selection is called}
AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
FM F4 selection is called}
now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
Thanks
Swarnali

Hello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin.

How to get all values in the range of select option into internal table?

Hi,
I need to capture all entries coming in the range of select option into one internal table.
How to do get that?
For E.g
select-options: matnr for mara-matnr.(select option)
IF I enter G0100013507892 as lower value of matnr and G0100014873947 as higher value
and if there are 10,000 materials in the above range, then I want to capture all theses 10000 materails in one internal table. How to do that?
Regards,
Mrunal

Hello Mrunal Mhaskar ,
What i understand you can do one thing go in debug mode
Try this code : -
LOOP AT s_matnr_ex.
IF s_matnr_ex-low IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-low.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
LOOP AT s_matnr_ex.
IF s_matnr_ex-high IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-high.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
In the i_matnr table high and low values are there.
Regards,
Vandana.

BAPI at INPUT give range like SELECT-OPTIONS

hi all
i don't know weather it right forum for BAPI , but writing under this .
my requirement is like , as we give range in SELECT-OPTIONS,
like wise i want to give range in BAPI at INPUT level .
i.e. say i want to get details of Vendors , i will write a BAPI and i will give VENDOR code range to get information of all vendor with in that range.
please guide me in this .

Hi!
You could use this bapi fm: BAPI_VENDOR_GETDETAIL
I could imagine it like this:
1. You have to create an FM, with the RA_LIFNR range.
2.
SELECT * FROM lfa1 INTO TABLE gt_lfa1
WHERE lifnr IN ra_lifnr.
LOOP AT gt_lfa1 INTO gs_lfa1.
CALL FUNCTION 'BAPI_VENDOR_GETDETAIL'
with the parameters
collect data into an output table
ENDLOOP.
3. Give back the output table to the caller program
Regards
Tamá

Passing multiple values to select-option low by submit at one go from zpro.

Hi all,
I have a requirement pass descrete multiple values form my z-program to to select-option low on selction screen of standard SAP program using SUBMIT statment at one go.At the same time select-option high will be empty.I will be thankful if anybody can help me in this regard.
Sandeep.

Hi Check this link...on submitting programs
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db9d7535c111d1829f0000e829fbfe/frameset.htm
here is the code . we are calling the same program....you can call any other program as well.
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.

How to restrict more than one 1 range in select option on selection screen.

Hi all,
I have a requirement where I need to restrict user from giving more than 1 range for a date selct option ..other all features of multiple selection will be as usual...
for eg we can do this if we disable / hide other cells if the user clicks on multiple ranges tab.. If only 1 cell is available to give the range user will not be able to give more than 1 range....
I was thinking if I could use select_options_restrict but how do i fill its parameters...
Can anyone send me the sample code or the same to achieve this functionality...I have used select_options_restrict to hide multiple ranges itself ... But here user will be able to give range but only 1....
Thanks and Regards
Sweta

HI,
Please try the below logic.
SELECT-OPTIONS: so_addr   FOR    ADR6-SMTP_ADDR NO INTERVALS.
***********remove_range_for_select_option******************* .
DATA: ls_restrict TYPE SSCR_RESTRICT,    "The type for SELECT_OPTIONS_RESTRICT
        ls_opt_list TYPE SSCR_OPT_LIST,    "One list of options
        ls_asn       TYPE SSCR_***.         "One line of table associating selection screen
                                                                  "object with opt. list
CLEAR: ls_restrict,
         ls_opt_list,
         ls_asn.
*Only EQ valid, discrete values, Include & Exclude
ls_opt_list-name       = 'EQ'.
ls_opt_list-options-eq = 'X'.
APPEND ls_opt_list TO ls_RESTRICT-OPT_LIST_TAB.
LS_ASN-KIND            = 'S'.
LS_ASN-NAME            = 'SO_ADDR'.            "Select Option
LS_ASN-SG_MAIN         = 'I'.
LS_ASN-SG_ADDY         = '*'.
LS_ASN-OP_MAIN         = 'EQ'.
LS_ASN-OP_ADDY         = ' '.
APPEND LS_ASN TO LS_RESTRICT-***_TAB.
*Make use of SELECT-OPTIONS easier on the selection screen
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
    EXPORTING
      RESTRICTION            = LS_RESTRICT
    EXCEPTIONS
      TOO_LATE               = 1
      REPEATED               = 2
      SELOPT_WITHOUT_OPTIONS = 3
      SELOPT_WITHOUT_SIGNS   = 4
      INVALID_SIGN           = 5
      EMPTY_OPTION_LIST      = 6
      INVALID_KIND           = 7
      REPEATED_KIND_A        = 8
      OTHERS                 = 9.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Rajasekhar Reddy P on Mar 16, 2009 2:03 PM

How to pass Multiple entries of select-options to FM

Hi friends,
        i need to pass values date_from and date_to of FM BAPI_AR_ACC_GETSTATEMENT in my report. i have select-option in the selection screen for the posting date i.e, s_pstgdate-low = date_from and s_pstgdate-high = date_to.
    My question is how to pass values if the user enters multiple entries in s_pstgdate (selection-screen).
    Hope i'm clear with my question.
    Thanks in anticipation.
Regards
Poorna

Hi,
This is not possible.
You may wish to call it multiple times with each row of your select-option, and consolidate the returned records.
Better is to restrict the select-option with no-extension.
cheers,

Multiple inputs like select-option

Hi everybody,
Please let me know if there exists an option in BSP for multiple inputs in inputfield, like we have in select-option in R/3.
Thanks

Hello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin.

Using widecard character or range in selection option

Hi gurus',
i am making a report on PS Module.
I have taken selection fields as follows.
SELECT-OPTIONS : in_psphi FOR proj-pspnr OBLIGATORY        "Project
when i run and insert the project name in in_psphi-low and in_psphi-high then output will come accordingly.
now i want to put project range using widecard character say IC* or IC-0000000001 to IC-999999999
then it has shown project not found. I found in many standard reports like CN52N where you can put widecard character or range like above.
Please let me know how to do.
Pravin

hello parvin,
use this code and then execute your program,
now you would be able to fetch the projects with wild card entry serach
DATA: PSPID1 TYPE PROJ-PSPID.
RANGES: R_PNR FOR PSPID1.
RANGES: R_PSPID FOR PSPID1.
SELECT-OPTIONS: S_PSPID FOR PSPID1.
   IF NOT S_PSPID[] IS INITIAL.
     LOOP AT S_PSPID.
       IF NOT S_PSPID-HIGH IS INITIAL.
         IF S_PSPID-HIGH CA '*' .
           R_PNR-LOW = S_PSPID-HIGH.
           R_PNR-OPTION = 'CP'.
           R_PNR-SIGN = 'I'.
           APPEND R_PNR.
           CLEAR R_PNR.
* GET HIGHER VALUE
           SELECT MAX( PSPID )
                       INTO R_PSPID-HIGH
                       FROM PROJ
                       WHERE PSPID IN R_PNR.
           IF R_PSPID-HIGH IS INITIAL.
             SELECT MAX( PSPID )
                     INTO R_PSPID-HIGH
                     FROM PROJ
                     WHERE PSPID <= S_PSPID-HIGH.
           ENDIF.
         ELSE.
           R_PSPID-HIGH = S_PSPID-HIGH.
         ENDIF.
* GET LOWER VALUE
         IF S_PSPID-LOW CA '*' .
           SELECT MIN( PSPID )
                   INTO R_PSPID-LOW
                   FROM PROJ
                   WHERE PSPID IN S_PSPID.
           IF R_PSPID-LOW IS INITIAL.
             SELECT MIN( PSPID )
                  INTO R_PSPID-LOW
                  FROM PROJ
                  WHERE PSPID >= S_PSPID-LOW.
             IF R_PSPID-LOW IS INITIAL.
               R_PSPID-LOW = S_PSPID-LOW.
             ENDIF.
           ENDIF.
         ELSE.
           R_PSPID-LOW = S_PSPID-LOW.
         ENDIF.
         R_PSPID-OPTION = S_PSPID-OPTION.
         R_PSPID-SIGN = S_PSPID-SIGN.
         APPEND R_PSPID.
         CLEAR R_PSPID.
       ELSE.
         R_PSPID = S_PSPID.
         APPEND R_PSPID.
         CLEAR R_PSPID.
       ENDIF.
     ENDLOOP.
     S_PSPID[] = R_PSPID[].
   ENDIF.
now use the s_pspid as u were using earlier.
It will surely help
Regards
Geeta gupta

High range in select-options

how to hide the high value in select-options statement,its urgent

hi,
at designing only u can make select options with out high value as
tables : MARA.
SELECT-OPTIONS : s_MATNR FOR MARDt-MATNR NO INTERVAL
at run time to hide the selct options high value try like this
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'S_MATNR-HIGH'.
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP
IF HELPFUL REWARD SOME POINTS.
with regards,
Suresh aluri.

How to select multiple data without select options?

Dear experts,
I have a rquirement that i have a one selection screen and in that selection screen on date field is there which is parameter type. we using this parameter date field in the program for selecting data..after that i am using the logic to multiple value..now my requirement is how to select the data for multiple value..
PARAMETERS : SO_DATE TYPE SY-DATUM OBLIGATORY.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
   EXPORTING
     DATE            = so_date
     DAYS            = 1
     MONTHS          = 0
     SIGNUM          = '-'
     YEARS           = 0
   IMPORTING
     CALC_DATE       = so_date
      l_cm_first+0(6) = so_date+0(6). " month & year
      l_cm_first+6(2) = '01'. " date
      l_cm_end = so_date.
my requirement is that how to use l_cm_first and l_cm_end multiple selection in select query ??
eg- i want to fetch the data from 1/8/2014 to 11/08/2014 using this field l_cm_first and l_cm_end

    l_cm_first+0(6) = so_date+0(6). " month & year
      l_cm_first+6(2) = '01'. " date
      l_cm_end = so_date.
after executing this line l_cm_first = 1/8/2014 and l_cm_end = 11/08/2014
now i have to select in this range how to do it?

Handle SF for multiple customers in select options

Hi All,
I have a Customer Statement where I need to Print for multiple customer's invoice details.. The logic i have used here is i am passing the Customer data to the SmartForm(SF) and extracting the invoice details of that customer and then populating the SF for the layout.. the thing is i have to do the same thing here for multiple Customers.. i have to add the generated SF of other customers to the same spool.. please help me out with thsi scenario.
Thanks in Advance
Kan

Hi ,
create a internal table containg list of custome and all its details in the driver
program . Pass the internal table to the smaft form . Then in the smartform create the loop for the internal table . At the ned of loop create the command statement to break the page after details related to customer 1 is displayed and for mext customer it will be displayed in next page .
Regards

Disabling the Ranges option in Select options

Hi,
I have a requirement where I have to remove the possibility of entering the ranges for select-options on the selection screen (eg: FROM xyz TO xyz ).. For this I used SELECT OPTIONS NO INTERVALS.
Now the range option doesnt appear on the main selection screen. However, when I click on the Multiple Selection screen button next to this field.. here again I find an option to enter the ranges. Is there a way to disable this option on the Multiple Selection screen.
Could anyone please help me in this.
Regards,
Harsha

chk this program
REPORT TESTREP.
* Include type pool SSCR
TYPE-POOLS SSCR.
* Define the object to be passed to the RESTRICTION parameter
DATA RESTRICT TYPE SSCR_RESTRICT.
* Auxiliary objects for filling RESTRICT
DATA OPT_LIST TYPE SSCR_OPT_LIST.
DATA ***      TYPE SSCR_***.
* Define the selection screen objects
* First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_0 WITH FRAME TITLE TEXT-BL0.
SELECT-OPTIONS SEL_0_0 FOR SY-TVAR0.
SELECT-OPTIONS SEL_0_1 FOR SY-TVAR1.
SELECT-OPTIONS SEL_0_2 FOR SY-TVAR2.
SELECT-OPTIONS SEL_0_3 FOR SY-TVAR3.
SELECTION-SCREEN END   OF BLOCK BLOCK_0.
* Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS SEL_1_0 FOR SY-SUBRC.
SELECT-OPTIONS SEL_1_1 FOR SY-REPID.
SELECTION-SCREEN END   OF BLOCK BLOCK_1.
INITIALIZATION.
* Define the option list
* ALL: All options allowed
MOVE 'ALL'        TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOPATTERN: CP and NP not allowed
CLEAR OPT_LIST.
MOVE 'NOPATTERN' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOINTERVLS: BT and NB not allowed
CLEAR OPT_LIST.
MOVE 'NOINTERVLS' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* EQ_AND_CP: only EQ and CP allowed
CLEAR OPT_LIST.
MOVE 'EQ_AND_CP' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* JUST_EQ: Only EQ allowed
CLEAR OPT_LIST.
MOVE 'JUST_EQ' TO OPT_LIST-NAME.
MOVE 'X' TO OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* Assign selection screen objects to option list and sign
* KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-KIND,
        '*'          TO ***-SG_MAIN,
        'NOPATTERN' TO ***-OP_MAIN,
        'NOINTERVLS' TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
*             that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-KIND,
        'BLOCK_0'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'NOINTERVLS' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-KIND,
        'SEL_0_2'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'EQ_AND_CP' TO ***-OP_MAIN,
        'ALL'        TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-KIND,
        'SEL_0_3' TO ***-NAME,
        'I'        TO ***-SG_MAIN,
        'N'        TO ***-SG_ADDY,
        'JUST_EQ' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             RESTRICTION                = RESTRICT
*           DB                          = ' '
       EXCEPTIONS
             TOO_LATE                   = 1
             REPEATED                   = 2
             NOT_DURING_SUBMIT          = 3
            DB_CALL_AFTER_REPORT_CALL = 4
            SELOPT_WITHOUT_OPTIONS     = 5
             SELOPT_WITHOUT_SIGNS       = 6
             INVALID_SIGN               = 7
            REPORT_CALL_AFTER_DB_ERROR = 8
              EMPTY_OPTION_LIST          = 9
             INVALID_KIND               = 10
             REPEATED_KIND_A            = 11
             OTHERS                     = 12.
* Exception handling
IF SY-SUBRC NE 0.
ENDIF.
Message was edited by: Sekhar

How to get default values on selection screen(multiple ranges)?

i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...

Hi Suresh,
You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
Simply write the following code
tables : <name of the table from which the field belongs>
select-options <fieldname> for <tablename>-<fieldname>.
<fieldname>-sign = 'I'.
<fieldname>-option = 'BT'.
<fieldname>-low = '7000'.
<fieldname>-high = '8000'.
append <fieldname>..
similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
If using range replacethe select-option with the range statement.
Thanks.

Multiple range in select option

Similar Messages

Maybe you are looking for