Multiple Show Forms
I created multiple 'Show' forms using XML Form Builder and want to call them depending on the link selected in the RenderList.
Any clue?
Rgds
Hi Gulshan,
unfortunately, thats currently not possible.
To render an XMLForms ShowForm, we are using the normal WebDav servlet (...docs...) with a special ResourceFilter. So its only possible to render it in 2 different ways.
From my point of view, you can only write your own servlet which does the XSL tranformation (choose ShowXSL with Query parameter).
Best Regards
--Matthias
Similar Messages
-
How to include multiple tabs in my show form
Hi
As per my requirement I want to include multiple tabs in my show form using xmlform builder , different tabs are required to display the news under different categories which will help the user to choose the required tab.
Thanks in advance.Hi,
According to my understanding,
You are trying to create an xml template using xml form builder in such a way that once we publish the news using this template, it should be shown to the end user in the form of different tabs. Each tab will display some part of the news that we published.
Correct me if I am wrong.
The above functinality is not possible using xml form builder as far as I know. You should think of other ways to achieve it.
Raghu -
Multiple page form to email with sessions doesn't send mail
I am creating a multiple page form where a user can apply for finance. I am trying to use session to keep the user input values and then the last page sent the application by email.
My problem is the last step where it doen't send the email. I'm not sure if it the session I'm using is wrong because a simple form without sessions works fine.
here are the forms
First page is the input for with variables
<form action="Finance_form_proposal_Address.php" method="post" >
<span id="sprycheckbox1">
<input name="Disclaimer" type="checkbox" value="yes">
<span class="checkboxRequiredMsg">Please confirm that you have read and understood the Terms and Conditions.</span></span>
<div id="F1"><table width="100%" border="1" align="center" cellpadding="3" cellspacing="2">
<tr>
<td align="right" bgcolor="#F7E4F8" ><strong>Title:</strong></td>
<td align="left" bgcolor="#F7E4F8"><select name="Title">
<option value="Mr">Mr</option>
<option value="Mrs">Mrs</option>
<option value="Miss">Miss</option>
<option value="Ms">Ms</option>
<option value="Dr">Dr</option>
<option value="Rev">Rev</option>
</select></td>
etc..
</form>
The second form:
Getting values and input new form
<?php session_start();
$_SESSION['Disclaimer'] = $_POST['Disclaimer'];
$_SESSION['Title'] = $_POST['Title'];
$_SESSION['Forname'] = $_POST['Forname'];
$_SESSION['Middle_name'] = $_POST['Middle_name'];
$_SESSION['Surname'] = $_POST['Surname'];
$_SESSION['email'] = $_POST['email'];
$_SESSION['DOB'] = $_POST['DOB'];
$_SESSION['DOB2'] = $_POST['DOB2'];
$_SESSION['DOB3'] = $_POST['DOB3'];
$_SESSION['Gender'] = $_POST['Gender'];
$_SESSION['checkboxGroup1'] = $_POST['checkboxGroup1'];
$_SESSION['checkboxGroup2'] = $_POST['checkboxGroup2'];
$_SESSION['home_phone'] = $_POST['home_phone'];
$_SESSION['mobil'] = $_POST['mobil'];
$_SESSION['marital_status'] = $_POST['marital_status'];
$_SESSION['Occupancy'] = $_POST['Occupancy'];
$_SESSION['Dependants'] = $_POST['Dependants'];
?>
Form on second page
<form action="Finance_form_proposal_Bank_Details_employment.php" method="post"> <input name="Disclaimer" type="checkbox" value="yes">
<div id="F1"><table width="100%" border="1" align="center" cellpadding="3" cellspacing="2">
<tr>
<td align="right" bgcolor="#F7E4F8" ><strong>Correspondence Address:</strong></td>
<td align="left" bgcolor="#F7E4F8"><input name="Correspondence" type="checkbox" id="Correspondence" value="yes" checked="CHECKED">
<label for="Correspondence"></label></td>
</tr>
<tr>
<td bgcolor="#F7E4F8"><strong>Street:</strong></td>
<td bgcolor="#F7E4F8"><input name="Street" type="text"></td>
</tr>
<tr>
<td bgcolor="#F7E4F8"><strong>District:</strong></td>
<td bgcolor="#F7E4F8"><input name="District" type="text"></td>
</tr>
<tr>
<td bgcolor="#F7E4F8"><strong>Town:</strong></td>
<td bgcolor="#F7E4F8"><input name="Town" type="text"></td>
</tr>
etc ..
</form
Third page
Getting values
session_start();
$_SESSION['Correspondence'] = $_POST['Correspondence'];
$_SESSION['Street'] = $_POST['Street'];
$_SESSION['District'] = $_POST['District'];
$_SESSION['Town'] = $_POST['Town'];
$_SESSION['County'] = $_POST['County'];
$_SESSION['Country'] = $_POST['Country'];
$_SESSION['Years'] = $_POST['Years'];
$_SESSION['Months'] = $_POST['Months'];
$_SESSION['Street2'] = $_POST['Street2'];
$_SESSION['District2'] = $_POST['District2'];
$_SESSION['Town2'] = $_POST['Town2'];
$_SESSION['County2'] = $_POST['County2'];
$_SESSION['Country2'] = $_POST['Country2'];
$_SESSION['Years2'] = $_POST['Years2'];
$_SESSION['Months2'] = $_POST['Months2'];
$_SESSION['Street3'] = $_POST['Street3'];
$_SESSION['District3'] = $_POST['District3'];
$_SESSION['Town3'] = $_POST['Town3'];
$_SESSION['County3'] = $_POST['County3'];
$_SESSION['Country3'] = $_POST['Country3'];
$_SESSION['Years3'] = $_POST['Years3'];
$_SESSION['Months3'] = $_POST['Months3'];
Then there is a another form to fill in , wont show that as it is in principle the same.
This is the last page that should sent the data to email:
<?php
session_start();
/* Subject mail variables */
$emailsubject = 'Finance application from PandKshop';
$webmaster = '[email protected]';
/* Gathering Data */
$goods = $_POST['goods'];
$amount = $_POST['amount'];
$Total_Cash = $_POST['Total_Cash'];
$Deposit = $_POST['Deposit'];
$Balance = $_POST['Balance'];
$Payments = $_POST['Payments'];
$Diclaimer = $_SESSION['Disclaimer'];
$Title = $_SESSION['Title'];
$Forname = $_SESSION['Forname'];
$Middle_name = $_SESSION['Middle_name'];
$Surname = $_SESSION['Surname'];
$email = $_SESSION['email'];
$DOB = $_SESSION['DOB'];
$DOB2 = $_SESSION['DOB2'];
$DOB3 = $_SESSION['DOB3'];
$Gender = $_SESSION['Gender'];
$CheckboxGroup1 = $_SESSION['CheckboxGroup1'];
$CheckboxGroup2 = $_SESSION['CheckboxGroup2'];
$home_phone = $_SESSION['home_phone'];
$mobil_phone = $_SESSION['mobil_phone'];
$marital_status = $_SESSION['marital_status'];
$Occupancy = $_SESSION['Occupancy'];
$Dependants = $_SESSION['Dependants'];
$Correspondence = $_SESSION['Correnspondence'];
$Street = $_SESSION['Street'];
$District = $_SESSION['District'];
$Town = $_SESSION['Town'];
$County = $_SESSION['County'];
$Country = $_SESSION['Country'];
$Years = $_SESSION['Years'];
$Months = $_SESSION['Months'];
$Street2 = $_SESSION['Street2'];
$District2 = $_SESSION['District2'];
$Town2 = $_SESSION['Town2'];
$County2 = $_SESSION['County2'];
$Country2 = $_SESSION['Country2'];
$Years2 = $_SESSION['Years2'];
$Months2 = $_SESSION['Months2'];
$Street3 = $_SESSION['Street3'];
$District3 = $_SESSION['District3'];
$Town3 = $_SESSION['Town3'];
$County3 = $_SESSION['County3'];
$Country3 = $_SESSION['Country3'];
$Years3 = $_SESSION['Years3'];
$Months3 = $_SESSION['Months3'];
$Sort_Code = $_SESSION['Sort_Code'];
$Account = $_SESSION['Account'];
$Years_with_Bank = $_SESSION['Years_with_Bank'];
$Months_with_Bank = $_SESSION['Months_with_Bank'];
$CreditCard = $_SESSION['CreditCard'];
$ChequeCard = $_SESSION['ChequeCard'];
$Employment = $_SESSION['Employment'];
$income = $_SESSION['Income'];
$Income2 = $_SESSION['Income2'];
$Occupation = $_SESSION['Occupation'];
$Body = <<<EOD
<br><hr><br>
Goods: $goods <br>
Amount: $amount <br>
Total Cash: $Total_Cash <br>
Deposit: $Deposit <br>
Balance: $Balance
Nine Monthly Payments of : £ $Payments
Title: $Title <br>
Forname: $Forname <br>
Middle Name: $Middle_name <br>
Surname : $Surname <br>
Email: $email <br>
DOB: $DOB/$DOB2/$DOB3 <br>
Gender: $Gender <br>
Home_phone: $CheckboxGroup1 Mobile phone: $CheckboxGroup2 <br>
Home Phone number: $home_phone <br>
Mobile Phone number: $mobil_phone <br>
Marital_Status: $marital_status <br>
Occupancy : $Occupancy <br>
Dependants: $Dependants <br>
Correspondence Address: $Correspondence <br>
Street: $Street <br>
District: $District <br>
Town: $Town <br>
County: $County <br>
Country: $Country
Years: $Years
Months: $Months
Street2: $Street <br>
District2: $District2 <br>
Town2: $Town2 <br>
County2: $County2 <br>
Country2: $Country2
Years2: $Years2
Months2: $Months2
Street3: $Street3 <br>
District3: $District3 <br>
Town3: $Town3 <br>
County3: $County3 <br>
Country3: $Country3 <br>
Years3: $Years3 <br>
Months3: $Months3 <br>
Sort Code: $Sort_Code <br>
Account: $Account <br>
Years with the Bank: $Years_with_Bank <br>
Months with the Bank: $Months_with_Bank <br>
CreditCards: $CreditCard <br>
Cheque Card: $ChequeCard <br>
Employment: $Employment <br>
Income: £$income <br>
Income Frequency: $Income2 <br>
Occupation: $Occupation <br>
EOD;
$headers = "From: $email\r\n";
$headers .= "content-type: text/html\r\n";
$succes = mail($webmaster, $emailsubject, $Body, $headers);
session_destroy();
/* Results rendered as HTML */
$theResults = <<<EOD
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US" lang="en-US">
<head>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8'/>
<title>Thank you! The Piano and Keyboard Shop Online</title>
<link rel="STYLESHEET" type="text/css" href="contact.css">
<link href="The Piano and Keyboard Shop.css" rel="stylesheet" type="text/css" />
</head>
<body>
<h2>Thanks for your application!<br />
We endavour to get back to you as soon as possible with application results</h2>
Please contact us on 0116 2541053 if you have any questions regarding your finance application
Return to <a href="../index_main.php">Home Page</a>
<div id="advertising">
<div id="add_left"><a href="Contact.php">Contact us</a><br>
<a href="About.php">About us</a><br>
<a href="Finance.php">Finance</a><br>
</div>
<div id="adds_middle"><a href="term-conditions.php">Terms and Conditions</a><br>
<a href="Privacy-Policy.php">Privacy Conditions</a><br>
<a href="FAQ.php">FAQ</a><br>
</div>
<div id="adds_right"><a href="http://www.youtube.com/user/KeysoundWebsite">Follow us on YouTube</a><br>
<a href="https://twitter.com/KeysoundUK">Follow us on Twitter</a><br>
<a href="https://www.facebook.com/pages/Keysound/163590297024385">Follow us on Face book</a><br>
</div>
</div>
<div id="advertising"> <div id="copy"><img src="files/Images/copyright.gif" width="19" height="22">
</div> </div>
</body>
</html>
EOD;
echo "$theResults";
?>
Is there something wrong with my sessions or just something in the code?Standard Apple Mail. I'm running Yosemite 10.10.1, and I'm amazed to see that About Mail says it's Mail Version 8.1 (1993), copyright 1995-2014 Apple Inc.
Interesting thought, do you think that it doesn't like to work with itself? Actually, I'm fairly sure I've had the problem inside of other apps but I should document that. I'll keep notes to see where this happens. -
Alternative SHOW form for XML's
Hi techies,
I have made a XML news form with two SHOW forms. I need to show one group of users the first one the other group the other one. Has anyone a idea? I have been searching on SDN and could only find this procedure
1) Create a news form in the XML Forms Builder with multiple shows
2) In CM Configuration create a new XMLFormsResourceRenderer for the second show and enter the name of the new form
3) In CM Configuration create a new Layout Set using the XMLFormsResourceRenderer
4) Create an iView using the Layout Set
So the idea is to make a layoutset to SHOW and a layoutset2 to SHOW2
in thread https://www.sdn.sap.com/irj/sdn/thread?threadID=7591
Its clear to me but has anyone made such a resourcerenderer before? Can anyone give me some extra help on this specific case? Or are there better sollutions. I'm not a java developer yet.
Thanks in advance, I rewards points to usefull answers.
Frederik DefourHello,
Yes indeed, I also had the idea to create multiple iviews and assign these to the appropriate users. But instead of having a different list form, I would also like to have a different SHOW forms. The idea is that user group 1 has all xml fields, while usergroup 2 only is able to see a limited subset of these fields. (news for internal users and news for website). I think that I will need to make different list forms as well. Because the list of type1 goes to the show type 1. And the list of type 2 should go to the show type 2.
But if you can provide some extra technical details, please do.
Thanks already,
Frederik -
OIM 11g R2 PS1 error in App instances page due to multiple prcoess forms for a single RO
By mistake I attached two process definitions to a single resource object (RO) and it in turn mapped two process forms to the single resource object.
Now when I go to application instances page and do a searc, it shows the below error in the UI
IAM-4067027 : An error occurred in findAppInstances and the cause of error is An error occurred in getParentFormInfo and the cause of error is Multiple process forms exist for Test_Emp_RO..
I tried to assign a different RO and Form to the second process def in teh design console, but it throws SDK update failure error. How to resolve this error? Any inputs are appreciated.Check the for duplicacy in OBJ_KEY column of the process defination. If duplicate values exit then set them to 'null' and commit. Restart OIM if required
-
Hey folks,
could somebody help me please?
I will put an Navigation built with images in my XML show form.
I bulid this in an other HTML-Editor and would like to copy it into the XML show form but the images arn´t shown.
In which directory I have to copy this images and how is the path for it?
Can somebody help me?
Thanks a lot greetings
ALHi,
I have the xsl File from the XML Formsbuilder. With this file the show form is built!
In the XSL I will put in HTML Code. This is not a problem.
But I will put in a picture!
Example:
a href="#kontakt" name="menue">img border="0" src="1.gif" width="200" height="25" alt="Kontakt/Kurzinfo"></img</a
But I don´t know the correct path for the image source!
I copied the image into the project folder etc/xmlforms/project-folder
But as I created a new form, the pictures are not showed.
This is my problem. In which folder I have to copy the images and how is the path?
Greetings
AL
Edited by: Arthur Leichner on May 6, 2008 10:50 AM -
How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/iPad?
How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/ iPad?
This isn't supported in the current version of Adobe Reader on iPhone/iPad.
Shradha -
Can you have multiple contact forms in a single Muse site?
I have a site created in Muse that needs to use multiple contact forms of a sort. One is a simple contact form. Two others are sign up forms. In two of the three forms I have to separate the First and Last names. Also in those there are multiple Custom fields and Message fields.
The original simple contact form is working fine and has been. However, I modified one of the pages by adding a second form, the first of the two sign-up forms. It looked great in Muse, but when uploaded to the site, all of the fields were gone, leaving only the Labels in a single paragraph.
Does this mean I can't have multiple contact forms in a single site? If I actually, can, then what might have caused the problem? And what could you suggest for me to try to fix it?
Thank you,
LauraThank you for the information, but I cannot find anywhere in help where to find the field names (if that is my problem). I changed all the labels and the corresponding text inside the field (remember, Muse does not give access to code as far as I can tell). When I preview the page in a browser (using FireFox as default, but also tried with IE), everything looks good. When I export to html and open the index.html on my computer, everything still looks great. But when I FTP the page to the website, this is what I get:
First Name:RequiredRescuer Email:RequiredOrganization (if any):RequiredSubmitting Form...The server encountered an error.Form received.Geographic Areas Covered:RequiredRescuer Cell Phone:RequiredRescuer Home Phone:RequiredRescuer Home Address:
RequiredRescuer City:RequiredRescuer State:RequiredRescuer Zip code:RequiredRescuer Country:RequiredVeterinarian Name:RequiredVet Address:RequiredVet City & State:RequiredVet Phone:RequiredRequiredServices Offered:RequiredAdditional Info About You:Required Rescuer (available to general public) RequiredVolunteer (available only to Rescuers)RequiredPhoneRequiredEmailRequiredOtherRequiredLast Name:RequiredImage Verification:Required
How would you prefer to be listed?
How would you prefer to be contacted?
However, this is how it looks on the preview:
So, what is my problem? And how can I fix it?
Thank you,
Laura -
How can i select multiple values form select list
Hi ,
I have created few items in a page and all items are Lov items and based on these items stacked charts will display. My requirement is I need to select multiple values form LOV's
Eg: In Interactive report goto filter and select an item and expression as IN and select multiple items and i need to select multiple values like this.
Please anybody help me how to get multiple values.
I have one more doubt Can we have a Print preview option in APEX.
I have to see print preview for stacked charts. is it possible?
Regards
Narender BHI ,
Thank you for valuable information and looks good.but Here our client need to select multiple values.... for eg: Open IR report and click on Actions button --->select filter
select any column , operator as IN and from expression select multiple items.
I need to select multiple values in that way so, could you please guide me how can i achieve this.
Regards
Narender B -
I just received apple tv as a present this Christmas and the shows take too long to download when I want to watch them. Can I download multiple shows overnight or during day and watch them in the evening?? If so how?
The ATV stores no content.
Content can be downloaded to iTunes on a computer and then streamed to the ATV via HomeSharing. -
Filter Predefined Properies, Feedback Search, XML Forms Show form issues
Hi all,
I have created XML forms with XML builder and I have some questions.
1. When filtering by predefined properties I want to filter by two properties, which are the same. For example, if there is a publication with two authors and author is the predefined property, in the first field I write the name of the first author, in the second field I write the name of the second author, the result is all publications, which are by both authors and all publication, which are either by the one, or by the other.
I don't have this problem when I filter by two different predefined properties. For example the author and the year. Than the result is all publication, which are by the author AND published in the requested year.
How can I set this option to be able to filter by two same predefined properties and the relation between both properties to be AND?(only publications by both author)
2. In the Show form I have created link to the feedback, using XML Forms BUilder, but I need to write first the feedback to be able to see already existing feedbacks,
if there are any. In the ResourceRendering Form I have created link to the feedback by LayoutSet, where I can see first, if there are already existed feedbacks.
If there is any possibility to set a LayoutSet for the Show Form or any other way in the Show form to display first the existing feedbacks and than to be able to write a new.
And something else reffering to the Show form, is it possible to rate the item from Show form or at least to have link to the rating, not a link to the Details.
I have tried to create a link to the /Properties/col:rating, but it doesn't work. The link dispays the value, if it has been already rated.
3. Is it possible to search for any information in the feedbacks(to make the feedback searchable)?
Thanks in advance for any help.
Best regards,
ZlatinaHi Zlatin,
-> 1
By Default identic properties queries are connected by an 'OR'.
Please have a look into the documentation for further info.
http://help.sap.com/saphelp_nw04/helpdata/en/85/80b3d4c9ef11d5993e00508b6b8b11/frameset.htm
-> Search Options
So far it's not possible to connect two identic proerties by an 'AND' within the standard.
You can preset a search filter via the relevant Search Option Set.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/765140c770cd01e10000000a155106/frameset.htm
Regards Matthias Röbig-Landau -
Need help in creating multiple signature forms?
need help in creating multiple signature forms that can be digitally signed in adobe reader
Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
try -- test the result
set theNumber to theNumber as integer
exit repeat -- success
end try
end repeat
tell application "Finder"
try -- make new folder
set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
try -- make new subfolder
make new folder at newFolder with properties {name:folderName & X}
on error number -48 -- skip errors if the folder is already there
end try
end repeat
end tell -
In XML Show Form display Creator FirstName and LastName ?
Hi all,
In XML Form Builder i want to display the creator FirstName and LastName ( Diamond Admin) in the Show Form.
For egs:
Logon ID: diamond_admin
Last Name: Admin
First Name: Diamond
In the EDIT Form By using $sap_user and also createdBy property i'm getting the creator name as diamond_admin but i want to display the FirstName and LastName (Diamond Admin).
2)In the EDIT Form i used the Label for Time Based Publishing(TBP)
Opening Date = TimeStamp control
Closing Date = TimeStamp control
In the RenderList Form i'm showing the Closing Date label its display the date and time.
Closing Date= 05/12/08 08:00:00 PM
But i requirement is to show the closing date only not time(Closing Date= 05/12/08) in the RenderListItem Form..
How to do this?Please help me...
Regards
Thillai JWhen you are editing the Show Form, select the correct label in the form and in the property list area (bottom right) you have a property named "Display As". Select "Display Name" for the value.
Make sure that in your Data Model your property has the data type "user"
The "Display As" parameter should also work for your date problem as you can select "Short" to only display the date. -
1 SP for multiple Marketing Form
Dear Experts..
Plz check this SP
*IF @transaction_type IN ('A', 'U')AND @object_type in ('22')
BEGIN
If exists (SELECT T0.DocEntry FROM opor T0 inner join ousr t1 on t0.docentry = t1.userid
where t0.docentry =@list_of_cols_val_tab_del AND t0.U_series is null or t0.u_series = 'Primary' and T1.userid = '49')
Begin
SET @error = 1000001
SET @error_message = N'error in selecting Series'
End
END*
This is going well as needed. This SP is for blocking users to access unauthorized series. I need to block users for all marketing documents for series authorization . I was thinking that Can I make this SP for multiple Marketing Forms(objecttypes). But there was an issue that series code on every Marketing Forms is different.
Suppose if Primaty series code on OPOR is 147 then on ORDR same series code got change as 141. For this I created UDF for Series and set it on mandatory and set values same like series name (Primary, WA, WB).
or there is any other alternate for setting authorization on users series wise.
Plz suggest me if my query is possible for same. Otherwise I have to create SP for every form.
Regards,
RaviHi Ravi.......
The object ID of Production Order is 202......
For more information of Object IDs please check this Path and Link......
C:\Program Files\SAP\SAP Business One SDK\Help\objects ID
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOneObjectsIDandMenuIDList
CFL object-Id of Production_order
Regards,
Rahul -
How to Flatten/Print to PDF Multiple PDF Forms at Once?
Hi all! I receive multiple PDF forms per day. I file these forms electronically by using "print to Adobe PDF" (which flattens all the form fields). Is there a way to "print to Adobe PDF" multiple files at one? OR is there some other way to flatten form fields on multiple files at once? If I "combine supported files in Acrobat" the answers in the form fields of the first file auto-populate through all the other form fields in the additional files I combine.
I'm on a PC.There are much better ways of flattening a form than by printing it via the PDF printer. This utility for example can help you with that task:
http://www.uvsar.com/projects/acrobat/flattener/
If you have Acrobat Pro then you can use a simple Action to flatten multiple files. Just have it execute the following JavaScript code:
this.flattenPages();
Maybe you are looking for
-
Hoverscrub in Bridge for video subclip management
I have a library of hundreds of subclips which I use regularly to create mood videos for clients, but finding a useful way to collate and organise them has been difficult, as I want to be able to assign multiple tags for each video. For example, a vi
-
Modlue programming guide!
Need some help in module pool programming guide !
-
Where are the serial numbers?
I just bought the family pack of Snow Leopard, and I'm a little confused why I did. There aren't any serial numbers. For all I can tell, I could have installed this on 100 computers. Is there some serial number built into the DVD so they are keeping
-
Sorting query in MDX query filter in PPS
Hi, Iam new to the PPS world. Iam using MDX query filter and I need to create a filter field using the [BusinessLine].[Department] dimension. I need to sort the display value of Department in descending order in the filter and Iam using the following
-
Hi, I'm using OIM 11g R1 Can I prepopulate a childForm on a Provision Resource request? I can populate a field on the parent form but now I need prepopulate the request with a Child. It's possible? How can I do it? TKS