Multiple "slapd[46]: could not load the replica file" Errors

Hi,
We've got an OD master (10.4.8) that sporadically falls into a state where it reports the error "slapd[46]: could not load the replica file." many times over in the system log. It will start this with no warning and when everything is running just fine, but once it has started there errors build up until it is reporting them up to 20 times a second. Usually once it gets to this stage directory services start to suffer badly across the network and all connected servers. We usually have to reboot various servers at this point including the ODM in order to get services up and running again. After the reboots sometimes the problem will just disappear, sometimes it will just start building up again.
We only have one other replica (down from 4) which is on a separate subnet across a WAN. We managed to get rid of the problem for a while by getting rid of the replicas on the local subnet, but it just pops back up again for no apparent reason.
We attempted to install a new ODM with a brand spanking PW server a while ago and new replicas, but hit the same issue sometime into the install.
The only time I've ever seen an issue with this many errors being reported so often it turned out to be a network loop, but I know there is not one present now. I did wonder about a rogue device on the network causing issues but I'm not fixed on this.
Can anyone give me any ideas where to start looking for a resolution?
Cheers
Dan

Step 1: Download subinacl.msi from the link
http://go.microsoft.com/fwlink/?LinkId=23418 and install it.
Step 2: Download my modified version of reset.cmd from
http://gerger.com/o/assets/x/?id=22540 and save the file in 'C:\Program
Files\Windows Resource Kits\Tools'.
Step 3: Open Command Prompt as Administrator and type the following without
quotes (hit Enter):
'cd c:\program files\windows resource kits\tools'
Step 4: Now type 'reset.cmd' and hit Enter (without quotes)
You will see the Command Line Tool running for some seconds. The issue
should have been fixed and Quicktime should run again.
Enjoy!

Similar Messages

  • Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

    I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6.  In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them.  Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them.  I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.  Thoughts on how I can fix this bug?

    Hey Jeff--
    No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
    Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
    // app.activeDocument.ativeHistoryState = historyState;
    The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
    Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
    So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
    Hope this helps. May post more next week.

  • Error when attempting to sign panel - could not load the keystore file (password may be incorrect)

    Hi
    I always get the same error when trying to export as a cs extension for indesign cs5 and cs6 (haven't tried for any thing else)
    I am not trying to export to a read only address.
    I set up my own certificate, I have not registered with any authority like VeriSign so I presume that I can fill the details as I like, i.e. one name, any password I like.
    I select my Java installation by browsing see bellow
    I type the same password that I made up for the certificate and then get the error shown above.
    Note although it say that it exported the file with some error in fact it doesn't export any zxp file or anything else to any location that I could see let alone the location I specified.
    I get the same error when using the adobe exchange packer.
    Would very much appreciate a solution
    Thanks in advance
    Trevor

    Hi Yanwen Ju
    Thanks
    I tried that both the 64 and 32 bit versions, neither work.
    The file I use is called "Java.exe" please let me know if this is the correct one and if you have any other ideas
    Thanks in advance.
    Trevor

  • Error 2519 LabVIEW could not load the TDMS file component

    Hi there, 
    I have LabVIEW 2014 for Linux, and have successfully installed it on OpenSUSE 13.1 with no issues. 
    The problem I am seeing is with TDMS, I have placed down and "Open TDMS" followed by "close TDMS" provided it my file path to my TMDS File and I see the following error:
    I have searched NI.com and google, and what I keep finding is the problem with cRIO. I am running a desktop version of Linux as mentioned above. 
    Any help or advise would be greatly appreciated.
    Many thanks
    Kevin
    Solved!
    Go to Solution.

    Hey 
    Thanks for getting in touch with me. I can confirm I have the TDMS components installed and in the correct location.
    I will try to reinstall my LabVIEW and see if that helps.
    I have two systems that both are running the same version of Linux and I have the same issue on both systems. One is a physical system the other is a virtual machine replicating the physical system. 
    Many Thanks

  • Could not load the automated export settings (Azure Portal)

    We have several database setup with "Automated export". The export seems to be running ok, but I am unable to load the settings in the portal.
    I get the "Could not load the automated export settings."
    Does anyone have any suggestions on how to resolve this issue?

    Hello Ballistic2,
    Sorry for the inconvenience.
    As you know in the automated export first it create a temporary database(transaction consistent replica) in that server and then it is pushed to storage (which you have configured in the automated export). As per the error  it seems that there are some
    connectivity issue with the storage. If I am not wrong the error that you shared is from operation log of azure portal for sql database. I am not so much sure about the actual issue but yes we can try to nail down the issue. You can do a quick test of connectivity
    through SSMS from your local machine.
    open SSMS -->connect to local database -->select any database --> (right click) and go to Task and then export data tier application--> select save to windows azure and select the same container that you selected in the automated export
    and check if export works or you are getting same error.
    If it works then from same SSMS connect to sql azure Database and try the same steps with your database that is failing from the portal.
    Please let me know the result.
    Regards,
    Mukesh

  • Admin tool could not load the essbase driver.Please check the configuration

    Hi All,
    I have obiee11g installed machine and want to connect that machine with essbase.
    For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
    *1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
    *2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
    *3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
    After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
    And also I manually added the essbasepath in bi-init.cmd file.
    Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
    "*Admin tool could not load the essbase driver.Please check the configuration*."
    kindly guide me to overcome this issue.
    Thanks and Regards
    sai
    Edited by: 923924 on Apr 24, 2012 5:20 AM

    Until you perform the configuration on the AD server, the following message will appear:
    Error: Could not start the SSO service. Please check the configuration.
    So configure the AD server so that the error message will not appear again.

  • Web Logic 10.3.6 (64bit) - Could not load the sitemesh filter and library

    Installed Web Logic 10.3.3 (32bit) and Java JDK 1.6.0_21 (32bit) in a customer's server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
    However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed with header and side menu, it is just displayed with a blank background. Refer to the below "ERROR LOG", found the application could not load the sitemesh filter and library properly. We are using sitemesh-2.3.jar.
    Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
    Please assist on this issue. Thanks.
    Below is the sitemesh that is declared and configured.
    WEB-INF/web.xml
    <filter>
    <filter-name>sitemesh</filter-name>
    <filter-class>com.opensymphony.module.sitemesh.filter.PageFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>sitemesh</filter-name>
    <url-pattern>/*</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>INCLUDE</dispatcher>          
    </filter-mapping>
    WEB-INF/decorators.xml
    <decorators defaultdir="/template/decorators">
    <decorator name="plain" page="plain.jsp"/>
    <decorator name="printable" page="printable.jsp"/>
    <decorator name="standard" page="page_template_std.jsp">
    <pattern>/*.jsp</pattern>
    </decorator>
    <excludes>
    <pattern>/include/*</pattern>
    <pattern>/js/*</pattern>
    <pattern>/Login.jsp*</pattern>
    </excludes>
    </decorators>
    WEB-INF/sitemesh.xml
    <sitemesh>
    <property name="decorators-file" value="/WEB-INF/decorators.xml"/>
    <excludes file="${decorators-file}"/>
    <page-parsers>
    <parser content-type="text/html"
    class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
    <parser content-type="text/html;charset=ISO-8859-1"
    class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
    </page-parsers>
    <decorator-mappers>
         <mapper class="com.opensymphony.module.sitemesh.mapper.PageDecoratorMapper">
              <param name="property.1" value="meta.decorator" />
              <param name="property.2" value="decorator" />
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.FrameSetDecoratorMapper">
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.AgentDecoratorMapper">
              <param name="match.MSIE" value="ie" />
              <param name="match.Mozilla [" value="ns" />
              <param name="match.Opera" value="opera" />
              <param name="match.Lynx" value="lynx" />
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.PrintableDecoratorMapper">
              <param name="decorator" value="printable" />
              <param name="parameter.name" value="printable" />
              <param name="parameter.value" value="true" />
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.RobotDecoratorMapper">
              <param name="decorator" value="robot" />
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.ParameterDecoratorMapper">
              <param name="decorator.parameter" value="decorator" />
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.FileDecoratorMapper">
         </mapper>
         <mapper class="com.opensymphony.module.sitemesh.mapper.ConfigDecoratorMapper">
              <param name="config" value="/WEB-INF/decorators.xml" />
         </mapper>
    </decorator-mappers>
    </sitemesh>
    ERROR LOG
    ####<May 8, 2012 5:38:49 PM SGT> <Error> <HTTP> <BHQKPK10060> <cms_cimbmy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336469929804> <BEA-101165> <Could not load user defined filter in web.xml: com.opensymphony.module.sitemesh.filter.PageFilter.
    com.opensymphony.module.sitemesh.factory.FactoryException: Cannot construct Factory : com.opensymphony.module.sitemesh.factory.DefaultFactory: java.lang.reflect.InvocationTargetException
         at com.opensymphony.module.sitemesh.Factory.getInstance(Factory.java:50)
         at com.opensymphony.module.sitemesh.filter.PageFilter.init(PageFilter.java:87)
         at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
         at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Do you see any further nested exceptions OR errors in the log file.
    Considering that the same WLS-JDK combination works on one machine and does not work on another machine, it indicates an environmental issue.
    "However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed....
    Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu."
    I am suspecting if it has to do anything with the native libraries being loaded JAVA_LIB_PATH.
    Please review the server log file again for identifying differences in LIB_PATH or PATH or any messages saying "Unable to load native.. performance pack.."
    Arun

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

  • SQL Server 2012 Express - Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop

    Windows 7 Home Premium, SP1
    64-bit
    I just installed SQL Server 2012 express - Express with Advanced Services (contains the database engine, Express Tools, Reporting Services, and Full Text Search),
    file name -  SQLEXPRADV_x64_ENU.
    Opening SQL Server Management Studio causes the error -
    "Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop,
    Version=7.1.40304.0, Culture=neutral,
    PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The
    system cannot find the file specified."
    Do I need to install another file? Did I download the wrong version?
    Any suggestions? Thanks for any help.

    Hello,
    The issue may occure when the installation of your SQL Server is not a complete or a successful one. Did you try to repair or reinstall the SQL Server Express?  You can also try to install
    Service Pack 1 for SQL Server 2012
    to check if the issue presists.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • CS6 photoshop message 'could not load the fast core routines module because the file was not found'

    my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it.  my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.

    I did a search on my system and found the Photoshop has a fastcore plug-in.  Creative Cloud includes a subscription version of CS6 version 13.1.2.   I do not know if you installed that or not.  The cc un-install may have done something.  You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop  CS6 version 13.0.6 Mac or Photoshop  CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2.  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6   If you need to download the CS6 installer Download CS6 products.
    You may also be able to recover your cs6 using an old system backup
    fastcore.8bx on my system...

  • Server could not load the class

    I m trying to create a new adapter task bt when i select xliACE.jar from the dropdown box, its trowing an error " Server could not load the class"
    Below is the server log--
    ERROR,04 Dec 2007 09:18:48,217,[XELLERATE.JAVACLIENT],Class/Method: tcADPClient/introspect encounter some problems : RemoteException occurred in server thread; nested exception is:
    java.rmi.ServerError: Unexpected Error; nested exception is:
    java.lang.UnsatisfiedLinkError: no ACEUser in java.library.path
    java.rmi.ServerException: RemoteException occurred in server thread; nested exce
    ption is:
    Could any one provide some help
    Thanks

    Should compile java code with the same jdk as being used by OIM

  • I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

    I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

    According to this forum post from the time of the shutdown, it is only those directly affected.
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
    Here is a list from that link
    If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable.  The specific affected products are as follows:
    Acrobat 7.0 - Windows
    After Effects 7.0
    Audition 3.0
    Captivate 1.0
    Contribute 2.0
    Contribute 3.0
    Creative Suite 2.0
    Director MX 2004
    Dreamweaver MX 2004
    Fireworks MX 2004
    Flash Paper 2.0
    Freehand MX
    GoLive CS2
    GoLive 9.0
    Illustrator CS2
    InCopy CS2
    InDesign CS2
    Macromedia Studo MX 2004
    Photoshop CS
    Photoshop CS2
    Photoshop Elements 4.0
    Photoshop Elements 5.0
    Premiere Pro 7.0
    Production Studio Premium

  • PE 5.0.2 - Could not load the FastCore Routines module because the file could not be found.

    The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
    Thanks for any help
    OS = Windows Vista.

    CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
               MULTIPROCESSOR SUPPORT NOT FOUND
              SUCCESSFULLY REPAIRED - STEP BY STEP
    I made the repair for Elements 5 on an XP version Operating System PC by doing this:
    I went to....
    Start / All Programs / Accessories / Windows Explorer
    and selected.....
    My Computer / C:
    which is my drive with its operating system where Photoshop is installed.
    I then clicked....
    Documents and Settings  
    Then - in each - of the three icons I found.....
    All Users, Default User, and Owner
    I went into....
    Application Data / Adobe / Photoshop Elements
    In that last file I removed ALL the contents.... IN EACH !
    After rebooting, my Photoshop Elements 5 started to work.
    I think with research and all I invested five hours. May this save you 4 1/2.
    I was paranoid and put the contents of each file into a new file I identified
    clearly in case it I have to replace one of the parts out in the future.
    I hope this is of help to some future reader.
    Other comments here seem to indicate that this solution has
    worked in version 4 and up and fixed early versions of Vista.
    This appears to be a common problem after a drive repair or partitioning.
    Why they can't just tell us this is a mystery to me.
    -- Bon Courage! --
                                      Ken

  • MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe" - Deploying from Linux

    Hi there, I'm facing the following error when deploying node.js application to azure websites. I have read enough articles which points me to install visual studio. I'm on a linux desktop and i'd like to use the git to deploy website. I tried changing to
    .NET 3.5/4.5  in the config but no help there. I've enabled python 2.7 aswell I have added the following to the query string to the handler_mappings in the portal but it isn't working. How do i go about fixing the same?
    PATH C:\Program Files\Microsoft Visual Studio 9.0\VC\vcpackages
    remote: Using start-up script server.js from package.json.remote: Generated web.config.remote: The package.json file does not specify node.js engine version constraints.remote: The node.js application will run with the default node.js version 0.12.0.remote: ..................................remote: remote: > [email protected] install D:\home\site\wwwroot\node_modules\mariasqlremote: > node-gyp rebuildremote: remote: remote: child_process: customFds option is deprecated, use stdio instead.remote: D:\home\site\wwwroot\node_modules\mariasql>node "c:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild remote: Building the projects in this solution one at a time. To enable parallel build, please add the "/m" switch.remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! build error remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack Error: `msbuild` failed with exit code: 1remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack     at ChildProcess.onExit (c:\Program Files (x86)\npm\2.5.1\node_modules\npm\node_modules\node-gyp\lib\build.js:267:23)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack     at ChildProcess.emit (events.js:110:17)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack     at Process.ChildProcess._handle.onexit (child_process.js:1067:12)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! System Windows_NT 6.2.9200remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere.  [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! command "node" "c:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"remote: gyp ERR! cwd D:\home\site\wwwroot\node_modules\mariasqlremote: gyp ERR! node -v v0.12.0remote: gyp ERR! node-gyp -v v1.0.2remote: gyp ERR! not ok remote: npm ERR! Windows_NT 6.2.9200remote: npm ERR! argv "D:\\Program Files (x86)\\nodejs\\0.12.0\\node.exe" "D:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\bin\\npm-cli.js" "install" "--production"remote: npm ERR! node v0.12.0remote: npm ERR! npm  v2.5.1remote: npm ERR! code ELIFECYCLEremote: remote: npm ERR! [email protected] install: `node-gyp rebuild`remote: npm ERR! Exit status 1remote: npm ERR! remote: npm ERR! Failed at the [email protected] install script 'node-gyp rebuild'.remote: npm ERR! This is most likely a problem with the mariasql package,remote: npm ERR! not with npm itself.remote: npm ERR! Tell the author that this fails on your system:remote: npm ERR!     node-gyp rebuildremote: npm ERR! You can get their info via:remote: npm ERR!     npm owner ls mariasqlremote: npm ERR! There is likely additional logging output above.remote: remote: Failed exitCode=1, command="D:\Program Files (x86)\nodejs\0.12.0\node.exe" "D:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\npm-cli.js" install --productionremote: npm ERR! Please include the following file with any support request:remote: An error has occurred during web site deployment.remote: npm ERR!     D:\home\site\wwwroot\npm-debug.logremote: remote: Error - Changes committed to remote repository but deployment to website failed

    Hello,
    From your description, this issue seems to be related with azure development, i move it to the azure forum there are azrue experts will help you. The current forum is for .NET class libraries.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Could not load the Multiprocessor Support module because it wont work with

    Here is a strange error message, there are actually 2.
    But they arent making PSE 8 unusable, just very annoying.
    Here is the first one,,,,,,,,,
    "Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
    When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
    My new Mac has 2 processors? Could that be what the message is saying?
    But when I click the error message away, PSE 8 works fine.
    There is another one too,
    "Could not load the FastCore Routines module because it doest not work with this version of photoshop."
    I just click it away and no problem, just a pita.
    So if they dont effect it, I shouldnt worry, but my classmates are concerned.
    Do you here have any idea what it is, and how to get rid of it?
    There is info on the web about it, but no solutions.
    Thank you,
    Jane

    This is interessting, as does my new Mac have 2 processors or 2 cores?  I havent come across how this works yet, nor how to find it on my Mac.
    Yes, I just found a site which explains it well,
    http://macperformanceguide.com/Optimizing-Cores.html
    I have one processor with 2 cores.
    And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
    You sure explained this well!   I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
    http://kb2.adobe.com/cps/407/kb407809.html
    Is what Adobe tells us, this is for Windows, but it could apply to Macs?
    I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before.  Thats confusing, as I would have thought it would have shown up right from the start.
    I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
    This will be fun to see what the real answer is!  As I find out more, I will add it here.
    Thank you,
    Jane

Maybe you are looking for