Multiple SSIDs: what firmware to use?

I have a WRT54GL, and I've heard some of those open-source firmwares allow you to create multiple SSIDs. I have some computers that use WPA, and one computer that uses WEP. So I'd like to be able to create one SSID for WPA clients, and another SSID for WEP clients. And also a third SSID for guests. What firmware will allow me to do that easily?

I am not sure that Open Source Firmware work properly or not .....

Similar Messages

WAP4410N and multiple SSIDs on different VLANs using RADIUS

I am trying to setup the above environment. When I connect on my guest network it does not give me an IP address from my guest network DHCP scope that is configured on my CISCO router.
Does anyone have any idea how to set this up???
Any help would be appreciated...

It is most likely (I'm not certain from the description) that
the 'sub-buttons' are a 'child' MC of the main button? if so, the
'on' handler for the 'main' button will override any handlers
attached to 'child' buttons within it. the only solution is to use
a hitTest method for either the 'parent' button or the 'child'
buttons, OR separate the two MCs and use the 'main' button to bring
a MC of the 'sub' buttons to the Stage.

1242AG Wireless Access Point - Cannot Get DHCP IP for BVI1 interface - Multiple SSIDs...

Hello,
I am attempting to set up three Cisco 1242AG Wireless Access Points with multiple SSID's. I used the web interface and directions online to set up the two networks I want and at least one of the networks work wirelessly.
However, I have two problems:
The first, which is the most important, is that the "management" interface, BVI1, doesn't get an ip address from our DHCP server. I set the VLAN 60 (which you'll see in the documenation below) to be the native VLAN on the device as well as on the switch that the device is connected to as well as other settings in the configeration file below. Because of this, I can only manage the device via the console port which would be a huge pain once all of the devices are mounted.
The second problem is that I am not sure how to get both wireless networks broadcasting their SSID's. I have to manually type in the SSID for the second wireless network I have which I would prefer I don't have to. Anyway I can enable broadcasting on all of the SSID's?
Thank you for your time.
Regards,
Christopher Koeber
Using 7916 out of 32768 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP-18.wesleysem.edu
enable secret {Number Here} {Encrypted Password Here}
enable password {Number Here} {Encrypted Password Here}
aaa new-model
aaa session-id common
dot11 syslog
dot11 vlan-name Kresge vlan 20
dot11 vlan-name Library vlan 30
dot11 vlan-name Public vlan 60
dot11 vlan-name Secure_Public vlan 70
dot11 vlan-name Secure_Seminary vlan 80
dot11 vlan-name Server_Room vlan 1
dot11 vlan-name Straughn vlan 40
dot11 vlan-name Trott vlan 10
dot11 vlan-name Web_Room vlan 50
dot11 ssid (Secure) Wesley Campus
vlan 80
authentication open
authentication key-management wpa version 2
wpa-psk ascii {Number Here} {WPA Key Here}
dot11 ssid Public
vlan 60
authentication open
mobility network-id 60
username Cisco password {Number Here} {Encrypted Password Here}
username admin privilege 15 secret {Number Here} {Encrypted Password Here}!
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 80 mode ciphers aes-ccm
ssid (Secure) Campus
ssid Public
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1
no ip route-cache
bridge-group 254
bridge-group 254 block-unknown-source
no bridge-group 254 source-learning
no bridge-group 254 unicast-flooding
bridge-group 254 spanning-disabled
interface Dot11Radio0.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
bridge-group 30 spanning-disabled
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
bridge-group 40 spanning-disabled
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
bridge-group 50 spanning-disabled
interface Dot11Radio0.60
encapsulation dot1Q 60 native
no ip route-cache
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 subscriber-loop-control
bridge-group 70 block-unknown-source
no bridge-group 70 source-learning
no bridge-group 70 unicast-flooding
bridge-group 70 spanning-disabled
interface Dot11Radio0.80
encapsulation dot1Q 80
no ip route-cache
bridge-group 80
bridge-group 80 subscriber-loop-control
bridge-group 80 block-unknown-source
no bridge-group 80 source-learning
no bridge-group 80 unicast-flooding
bridge-group 80 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
encryption vlan 80 mode ciphers aes-ccm
dfs band 3 block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1
no ip route-cache
bridge-group 254
bridge-group 254 block-unknown-source
no bridge-group 254 source-learning
no bridge-group 254 unicast-flooding
bridge-group 254 spanning-disabled
interface Dot11Radio1.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface Dot11Radio1.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
bridge-group 30 spanning-disabled
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
bridge-group 40 spanning-disabled
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
bridge-group 50 spanning-disabled
interface Dot11Radio1.60
encapsulation dot1Q 60 native
no ip route-cache
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 subscriber-loop-control
bridge-group 70 block-unknown-source
no bridge-group 70 source-learning
no bridge-group 70 unicast-flooding
bridge-group 70 spanning-disabled
interface Dot11Radio1.80
encapsulation dot1Q 80
no ip route-cache
bridge-group 80
bridge-group 80 subscriber-loop-control
bridge-group 80 block-unknown-source
no bridge-group 80 source-learning
no bridge-group 80 unicast-flooding
bridge-group 80 spanning-disabled
interface FastEthernet0
ip dhcp client update dns
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.1
encapsulation dot1Q 1
no ip route-cache
bridge-group 254
no bridge-group 254 source-learning
bridge-group 254 spanning-disabled
interface FastEthernet0.10
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
no bridge-group 10 source-learning
bridge-group 10 spanning-disabled
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
no bridge-group 30 source-learning
bridge-group 30 spanning-disabled
interface FastEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
no bridge-group 40 source-learning
bridge-group 40 spanning-disabled
interface FastEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
no bridge-group 50 source-learning
bridge-group 50 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
no bridge-group 70 source-learning
bridge-group 70 spanning-disabled
interface FastEthernet0.80
encapsulation dot1Q 80
no ip route-cache
bridge-group 80
no bridge-group 80 source-learning
bridge-group 80 spanning-disabled
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
end

I am using a third party DHCP server which is our Windows Domain Controller. I have the ip helper-address set for the native vlan of the Access Point through a layer 3 distribution switch (a Catalyst 4506) that the current switch connects to.
I didn't see any event on the logs for the AP.
Let me know if I need to do something else.
Thanks.

What is the use of Multiple source in Logical Table under BMM Layer?

what is the use of Multiple source in Logical Table under BMM Layer?
thanks in advance

Or more generally speaking:
To create a "logical table" consisting of multiple "physical tables"...hence the names. It's the backbone of the whole BI server concept and the way the rpd handles the requests.
I.e.: how would you otherwise proceed for making an analyzable table from SAP, Teradata, Oracle and a flat file with no full change-access to all the data sources?

Using multiple SSID with AP 1100 (standalone mode).

Hi, need to configure 2 SSID on the same 1100 AP: open authentication and WPA2. It's possible to configure these 2 SSID without configuring VLAN's ?
On CCO I've read the following:
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Q. How many service set identifiers (SSIDs) can you have per VLAN?
A. You can have only one SSID per VLAN. The use of multiple SSIDs over a single VLAN is not supported with Aironet APs.
It's also true with the latest IOS release ?

Hi Roberto,
Hopefully the attached docs will answer your question:
Cisco Aironet 1100 Series
Using VLANs with Cisco Aironet Wireless Equipment
Deprecated versions of Cisco Aironet software permit binding multiple SSIDs to one VLAN. Current versions do not.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.2(15)JA
Configuring Multiple SSIDs
vlan vlan-id
(Optional) Assign the SSID to a VLAN on your network. Client devices that associate using the SSID are grouped into this VLAN. You can assign only one SSID to a VLAN.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00802085c4.html
Hope this helps!
Rob
Please remember to rate helpful posts.......

Authentication with Multiple SSIDs AP521G, using Autonomous

I have an AP521G access point that I am trying to setup authentication for multiple SSIDs. One SSID is for domain users with WPA/TKIP authentication to a radius server and the other SSID is for guest to have access to Internet with no authentication. Is there a way to setup both SSIDs on the AP for this configuration?

Security option for an SSID can be unique and can be configured when you configure a SSID or under VLAN . Note that each vlan is uniquely mapped to induvidual SSID.

Is it possible to do multiple ssids and encryptions on an autonomous AP without vlans?

I got a customer who just has autonomous APs. They are upgrading from 1210s to 1262s. They are currently running a config that is wide open with no authentication or encryption and using a VPN tunnel on the wireless clients for security. They want to switch to using WPA2/PSK with the new APs. They have existing clients that have to continue to work during the upgrade to the new APs. They run 3 shifts so it is a 24 hr operation with no downtime. What I was thinking would be to configure the 1262 with multiple SSIDs, one with their existing settings and one with the new. Then I could swap the APs one at a time and it would only impact service for a short period of time while I was mounting the new AP. Then once all the new APs are installed I could transition the clients over to the new SSID and encryption then disable the old SSID once all the clients are switched over. I've done this before with a WLC but not with an autonomous APs. The only config examples I can find uses VLANs. This customer is not using VLANs. Is there anyway to use multiple SSIDs with different encryption on a single radio on an autonomous 1262 without VLANs?
The site has about 30 APs and 100 clients. Yes I know a controller would be preferred for a site of this size but that is a question for sales and why they didn't see them a controller. I just get stuck with what they sell them.
thanks

Hi Don,
Im afraid on the autonmous platform you can not map multiple WLANS to a single vlan.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

WAP200 and .1x/radius authentication with multiple SSIDs

Apparently it's not possible to define more than a single radius server when using multiple SSIDs with WAP200. Unfortunately WAP200 doesn't add the name of the SSID as a radius attribute, so it's not possible to make distinction whether the user is trying to log in to SSID A or B. Does anyone have any ideas or workarounds for this limitation? Of course the best solution would be if Cisco/Linksys fixed the firmware so that the SSID of the logging in user would be sent to the radius server as an extra attribute or appended to the client mac address.

Security option for an SSID can be unique and can be configured when you configure a SSID or under VLAN . Note that each vlan is uniquely mapped to induvidual SSID.

Multiple SSIDS and disappearing

We have Cisco 3602i access points for the most part, all of which advertise multiple SSIDs.
Very occasionally we see an SSID completely disappear from view, even though others remain solid (I can't say it's all devices as the majority of people who raise the issue have apple devices, but there are the odd one or two who use Windows laptops).
Also, the RSSI seems to fluctuate wildly.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
How does the AP deal with multiple SSIDs and does it prioritise?
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.

Hello,
See my comments:
Also, the RSSI seems to fluctuate wildly.
A: This is often how a device hears the frames. Sometimes in high interference you can epxect this to jump around. I normally like to see if all the devices are doing this or just a select few. Sometimes poor clients jump around more than others.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
A: I dont think turning off lower rates are bad unless your WiFi cant support the design. Good call get on the latest.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
A: Again, its a client missing frames like beacons.
How does the AP deal with multiple SSIDs and does it prioritise?
A: This SSIDs are virtualized. I blogged how this is done:
http://www.my80211.com/home/2011/5/2/wlc-how-cisco-virtualizes-the-base-radio-mac-address-on-the.html
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.
A: Again I think if you search you might see this is more around specific devices. I would do a packet capture and see what is going on. Recently had to troubleshoot an Android only to find out it was just bad wifi client. Always sending NULL frames and scanning and not passing traffic

Multiple SSID network; 1 Extreme (current gen) + 3 Express (2011 models)

Hi, I'm looking to set up an Wireless network using Multiple SSID's (Business and Guest) using one airport extreme and three Airport Expresses.
Are the Airport Expresses capable of bridging multiple ssids or extending multiple ssids?
What's the best practice on setting this up?
Regards,
Mike

By default, the AirPort Extreme will provide a simultaneous dual band signal for the "main" network, with both the 2.4 GHz and 5 GHz bands using the same wireless network name. You could think of this as your Business network.
Wireless devices will connect to the 2.4 GHz or 5 GHz band based on their capabilities and distance from the AirPort Extreme.
For example, most iPhones can only connnect to 2.4 GHz, so that is where they will connect. A newer laptop will be able to connect to either 2.4 GHz or 5 GHz.
5 GHz signals are faster, but much weaker than 2.4 GHz signals, so the 5 GHz signals tend to be pretty much a line-of-sight or close proximity type of connection. In other words, if a laptop is in cloxe proximity to the AirPort Extreme, it will likely connect to the 5 GHz band. If the laptop moves a few rooms away, it will likey connect to the 2.4 GHz band.
The AirPort Extreme does have an option to enable a Guest Network......IF.....you plan to connect the AirPort Extreme to a simple modem....not a modem/router or gateway type of device.
If you are not sure what you have, post back with the make and model number of your "modem". If you do not have the right type of modem, you will not be able to configure a Guest Network.
Important.....the Guest Network cannot be extended. The signal will only be produced by the AirPort Extreme.
I assume that you want to use the Express devices to "extend" the signal using wireless only.
Since the AirPort Express models that you have are not simultaneous dual band devices, they will be able to extend one band of the AirPort Extreme's wireless signal. In most cases, the Express will extend the 2.4 GHz band, since it is the stronger signal.
Each AirPort Express connects to the AirPort Extreme's signal, so each AirPort Express will need to be located where it can receive a strong wireless signal from the AirPort Extreme.
It would be better if you could connect each AirPort Express to the AirPort Extreme using a wired Ethernet connection. This would allow you to locate each AirPort Express exactly where it will be needed.

Configuring Multiple SSIDs

Hello,
I like to run multiple SSIDs on the same terminal. As the dynamic assignment of VLANs does not work with MBSSID, I try to configure how SSIDL IE. I followed the doc Cisco (Chapter 7) Next, alas my config does not work (in fact, among the clients tested, only one client receives the correct SSID). I upgraded the terminal IOS 12.4 (21a)-JA1 without success. Thank you for your help.
you can find in the attach the configuration.
Could you please help me ?
Best regards

You have alot of vlans and ssid's.. might cause you issue with older clients or handheld devices. You check your radius logs to see what the failure are. Make sure you set the radius attributes correct:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)—Set this to VLAN.
IETF 65 (Tunnel Medium Type)—Set this to 802
IETF 81 (Tunnel Private Group ID)—Set this to VLAN ID.
Scott

Wireless Network Management with Multiple SSIDs in one Wireless Profile

Could anybody explain me about how Multiple SSIDs in one Wireless Network Name (Network Profile) ? Configuration will be pushed to Windows 7 Pro from Wins Server 2008 R2.
Objective: Multiple office locations will have different SSIDs and when the laptop user travels one location to another, he/she could connect to wireless networks at any offices without any configuration change but utilizing "Automatically use my Windows
logon name and password (and domain if any.)" setting in EAP MSCHAPv2 properties.
Network Name: Enterprise
SSIDS: SFO-WIFI, LAX-WIFI,CHI-WIFI,NYC-WIFI,
Network Type:Access Point
Security Type: WPA2-Enterprise
Encryption Type: AES
Network Authentication Method: Microsoft:Protect EAP(PEAP)
My question is: (1) Will Windows try all the SSIDs in order to get connected to the Wireless Network at the office? (Let's say, user is in NYC, but will Windows try to find SFO-WIFI SSID first, wait until time out, retry?, and moves on to LAS-WIFI SSID,
wait until time out, retry?, and moves on to CHI-WIFI and finally tries NYC-WIFI SSID and found the SSID in the beacon from Access Point and authenticates through RADIUS?
(2) If the answer is YES, what is the waiting time/timeout setting for one SSID before moves on to another?
(3) If the answer is NO, what is the process to get user connected to NYC-WIFI SSID when he/she is in NYC office within the range of that SSID?

Hello Ninjago_2224,
About the multiple office location have different SSIDs, does the location A has the signal used in
location D?
Please go to Control Panel\Network and Internet\Network and Sharing Center
, and then click Manage wireless networks.
The windows will try to connect to these networks in the order listed.
Please check if the four SSID pushed by Windows Server 2008 is listed as mentioned above.
If the location A have the location D SSID and the location D SSID has higher priority, the Windows will connect to
location D SSID.
So about the question 1, the Windows will try the SSID in order.
About the question 2, I can’t find the accurate time that test one SSID and move to another. But based on my test, it is very fast.
For more information, please take a look at the following article.
http://www.howtogeek.com/howto/27067/change-wireless-network-priority-to-make-windows-7-choose-the-right-network-first/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Multiple SSID With Multiple VLANs configuration on Cisco Aironet APs: Assotiated clients cannot obtain IP addresses

Hi Surendra,
I was just given this task to see how i can configure a second ssid for guest access in our environment.
this is our network setup prior to this request: Internet----Firewall (not ASA)---ce520---C1131AG and CME router is also connecting to the ce520 switch. we only have two vlans: one for voice and two for data.
Presently, there is no vlan configured on the AP because it on broadcasting ont ssid and wireless users gets IP from a windows DHCP server on the LAN. the configuration on the ce520 switch port for the AP and other switches say access vlan is the DATA vlan which automatically becomes the native vlan for all trunk port connecting the AP and other Stiches to the network.
Now with this new requirement, i have made my research and i have configured the AP to broadcast both the production and the guest Vlans. The two vlans are 20-DATA and 60-Guest. I made the DATA vlan on the AP the native vlan since the poe switch is using the DATA vlan as native on the trunk ports. I configured the firewall to serve as DHCP server for the guest ssid and i have added the ip helper-address on the guest vlan interface on all switches while the windows server remains the dhcp server for the production DATA Vlan. I have confirmed that the AP, switches can ping the default gateway of the guest dhcp server which is another interface on the firewall. I can now see and connect to all broadcasted ssids but the problem is I am not getting IP addresses from both the production dhcp server and guest dhcp server when i connected to the ssid one at a time.
My AP config is attached below.
Please tell me what am I doing wrong.
Do i need to redesign the whole network to have a native vlan other nthan the data vlan?
Does the access point need to be aware of the voice vlan?
Do the native Vlan on the AP need to be in Bridge-group 1 or can i leave it in bridge-group 20?
I will greatly appreciate your urgent response.
Thanks in advanced.

Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf

Does AP1131G support feature 'multiple ssid'?

Hello
I've checked in feature navigator and I've seen AP1131G doesn't support multiple ssid feature. It's right?
If yes, What is replacement AP for AP1121?
I can't order old good AP1121 so I need good replacement for it.
Thank you!

Hi Pavel,
Just to add a clip to the good tips from Dan and Lucien (+5 points each guys :)
From the 1130 Quick Start Guide;
When the access point configuration is set to factory defaults, the first SSID that you create by using the Express Security page overwrites the default SSID, which has no security settings. The SSIDs that you create appear in the SSID table at the bottom of the page.** You can create up to 16 SSIDs on the access point.
http://www.cisco.com/en/US/docs/wireless/access_point/1130/quick/guide/ap1130qs.html#wp32816
Hope this helps!
Rob

Multiple SSID's on the same subnet?

Can you have Multiple SSID's on the same subnet?
SSID1 authenticates clients via radius.
Our corporation bought printers with wireless cards that only support WPA-PSK so we created SSID2 for the printers. We can connect to both SSID's and ping from SSID1 to SSID2 but we can not perform other functions such as view the printer management interface with a browser. Should it be possibe to communicate between SSID1 and SSID2 on the same subnet?

Yes you should have no issue, but the only thing is that you are using a lower security method... so either you put them on different subnets so you can control the traffic via acl's or might as well use the same security method to make it easier. The fact that you can ping sounds like you should be able to http to the device.

Multiple SSIDs: what firmware to use?

Similar Messages

Maybe you are looking for